GreenWorks 5203502 Owner's Manual

Surface Cleaner

5203502

Owner’s Manual

(888.909.6757)

TOLL-FREE HELPLINE: 1-888-90WORKS

www.greenworkstools.com

Read all safety rules and instructions carefully before operating this tool.

IMPORTANT, Retain this manual for future reference!

SAFETY INSTRUCTIONS

WARNING

Please read and comply with these original operating
instructions prior to the initial operation and store them for
later use or subsequent owners.

■ Please read the safety instructions of your pressure
washer.

■ Make sure there are no persons in the immediate
vicinity of the cleaning head.

■ Turn off the pressure washer when you nish cleaning.

■ Maximum water temperature 104 °F (Please read the
instructions of your pressure washer).

■ Wear eye protection with side shields that are marked
to comply with ANSI Z87.1 when operating this
equipment.

■ After use or before servicing, always disconnect the
surface cleaner from the pressure washer spray wand.

SYMBOL

Do not hold the edge of the surface
cleaner when it is on.

Read the operator’s manual. To reduce
the risk of injury, user must read and
understand operator’s manual before
using this product.

Eye protection. Always wear eye
protection with side shields marked
to comply with ANSI Z87.1, and as
necessary a full face shield when
operating this product.

Risk of injection or severe injury. Do not
directly spray at persons or animals.

PRODUCT SPECIFICATIONS

Connection ............1/4 in. Quick Connect Plug Inlet

Cleaning Width..................................................15 in.

Maximum Pressure .........................Up to 3100 PSI

Maximum Water Flow.................................2.5 GPM

Maximum Water Temperature........................ 104°F

KNOW YOUR SURFACE CLEANER

See g 1

1. 1/4 in. Quick Connection

2. Casing

3. High Pressure Nozzle

4. Rotor Arm

Proper use

This surface cleaner can be used on various materials,
including plastic, concrete, tiles, natural stone, and more.

1

2

3

fig.1

APPLICATION

4

Risk of injection or severe injury. Keep
hands and feet away from the deck while
the pressure washer is running.

Kickback.To reduce the risk of injury from
kickback, hold the trigger handle securely
with bothhands when the machine is on.

Risk of injection or severe injury. Only use
cleaning deck on flat,horizontal surfaces.
Never lift cleaning deck from the cleaning
surface while operating the pressure
washer.

PRODUCT INFORMATION

If any parts are damaged or missing, please call
1-888-90WORKS (888.909.6757) for Greenworks
customer service.

fig.2

2

Cleaning oor surface

Fastern the surface cleaner to the high pressure 1/4 inch

quick connect spray wand. See g 2

1. Pull back the quick-connect collar

2. Push the surface cleaner into place

3. Push the collar forward.

4. Pull the trigger gun to operate the machine

Tips for cleaning

■ Outdoor surfaces should be swept before the surface
cleaner is used to avoid damaging the high pressure
nozzles.

■ The surface cleaner is not suited for scouring or
scrubbing.

■ If striping or swirl marks occur, slow your pace.

■ If striping or swirling continues, the surface cleaner
nozzle(s) may be clogged. Disconnect surface cleaner
from pressure washer spray wand before servicing.
Using a straightened paper clip or nozzle cleaning tool
(not provided), free any foreign materials clogging or
restricting the nozzle.(See Fig.3)

Cleaning tool

Use a moist cloth and clean surface cleaner after use.

fig.3

Caution See g 4

Do not run over free standing corners. DO NOT lift or
tilt the surface cleaner from a horizontal surface while
connected to the spray gun during operation.

fig.4

GENERAL INFORMATION

Care

3