GreenWave PowerNode User Manual
Home Energy Management
PowerNodes
Home Energy Management
PowerNodes
Introduction 2
PowerNode Overview 3
Installation 6
Common Z-Wave Tasks 10
Network Inclusion Process 10
Network Exclusion Process 11
Safety Information 13
About GreenWave 14
Table of Contents
Introduction
The GreenWave Reality platform helps create a smart, energy-efcient home through the monitoring and controlling
of your powered appliances and electronics. You can conserve energy with minimal impact to your lifestyle by using
our products to easily manage your powered devices. Simply connect our Gateway to your home network, plug
your devices into our PowerNodes, and then monitor and control the devices’ power usage through a Web browser
or smartphone.
2
Home Energy Management
PowerNodes
PowerNode Overview
The GreenWave Reality PowerNode is a smart outlet adapter that connects your appliances and electronics to electrical outlets and your GreenWave Reality home network so that you can monitor and control your devices’ power
usage remotely through a Web browser or smartphone. The PowerNode is available as a single outlet node or as a
six-outlet strip.
The PowerNode automatically connects to your GreenWave Reality Gateway (the device that connects to your
home network). This connection enables the Gateway to securely connect the devices you have powered through
your PowerNode to your home network. The PowerNode collects data on the energy consumption of the
connected devices and transmits the data to the Gateway. You can then control
the energy consumption of each connected device automatically using
GreenWave Reality Smart Controls. These user-dened Smart Controls allow you to turn devices on or off remotely through a Web
browser or smartphone or to set a schedule for automatically
turning your devices on or off at pre-dened times.
1. PowerNode plug: Prongs that
you plug into your power outlet.
2. PowerNode outlet: Outlet
where you plug in your appliance
or electrical device.
3. Room color selector: Wheel
that you rotate you specify the
associated room color.
4. Sync button: Button that you
press to sync PowerNode with
Gateway.
5. Indicator: Button that shows
current activity and status of
synced devices.
4
1
2
5
3
4
Loading...