GreenTec HX 170, HX 230 Instructions Manual
GreenTec
Hedge Cutter HX 230
1
HX 170 - 230
Hedge Cutter
Instructions & Spare Parts Book
GreenTec
Hedge Cutter HX 230
2
This page is left blank
intentionally
GreenTec
Hedge Cutter HX 230
3
Important Information
HX 170 - 230
Manual
1st edition – January 2014
IMPORTANT
The contents of this Manual are based on the applicable information at the time of
publication.
However, as our products are regularly updated, the specifications will be subject
to occasional changes. In case you find information in this Manual that deviates
from the product in question, please contact our ”Aftersale” department for
guidance.
© GreenTec Limited 2014
Ensure that this Manual is seen by the operator prior to his first use of the
machine. It is important that the operator fully understands the contents of
this Manual prior to using the equipment.
(In case of resale, this Manual must follow the equipment!)
GreenTec A/S
Merkurvej 25
DK-6000 Kolding
Denmark
Tel: +45 75553644
Fax: +45 75554243
Email: info@greentec.eu
http: www.greentec.eu
GreenTec
Hedge Cutter HX 230
4
Contents
Contents ....................................................................................................................... 4
Introduction .................................................................................................................. 5
Useful Information ....................................................................................................... 6
EC Declaration of Conformity ..................................................................................... 7
Safety ............................................................................................................................ 8
Recommendations ..................................................................................................... 10
Pay attention to the following risks ........................................................................... 10
Do's .......................................................................................................................... 10
Don'ts ....................................................................................................................... 11
Product Description ................................................................................................... 12
Specifications............................................................................................................. 12
Prior to start-up of work ............................................................................................ 13
Setting of Working Posture ....................................................................................... 13
Starting the Tool ....................................................................................................... 13
Stopping the Tool ..................................................................................................... 13
Driving Instructions ................................................................................................... 13
High-Voltage Cables ................................................................................................ 14
Mounting / Dismounting ............................................................................................ 14
Field of Application ................................................................................................... 15
Charts ......................................................................................................................... 16
Maintenance ................................................................................................ ............... 17
Service Check / Re-tightening .................................................................................. 17
Lubrication ................................................................................................................ 17
Hydraulic Hoses ....................................................................................................... 17
Oil Supply ................................................................ ................................ ................. 18
Table: Regular Maintenance .................................................................................... 19
Bolts and Bushings ................................................................................................... 19
Storage ..................................................................................................................... 20
Troubleshooting ......................................................................................................... 21
Noise Measurement ................................................................................................... 21
Supplier Details and CE Marking .............................................................................. 22
Bans - Cautions - Regulations .................................................................................. 22
Dismantling ................................................................................................................ 22
GreenTec Warranty Provisions................................................................................. 23
Spare Parts ................................................................ ................................ ................. 24
Overview - Main Parts .............................................................................................. 24
Overview - Main Parts .............................................................................................. 25
Ram .......................................................................................................................... 26
Two-way Valve ......................................................................................................... 27
Cutting knifes, complete ........................................................................................... 28
Stickers .................................................................................................................... 29
GreenTec
Hedge Cutter HX 230
5
Introduction
Dear Customer!
Your new GreenTec hedge cutter was designed based on more than 20 years of experience with tractor
mounted equipment for the maintenance of green spaces. The hedge cutter was produced using the
newest technology and in accordance with recognized safety provisions, standards and regulations.
Our goal is to provide a product that will not give cause damage, injury or misunderstandings during use,
transport or maintenance.
This User Manual contains information and instructions that are important and useful in order to
preserving the operational reliability and value of your GreenTec hedge cutter. Consequently, you
should carefully read this Manual as it will give you knowledge of its fitting, use, care and maintenance.
Please pay extra attention to the safety instructions.
We invite you to take a look at our website at www.greentec.eu – where you will have access to the
latest instructions and spare parts books updates concerning our entire product portfolio via the vendor
login. The vendor login password is: PUBLISHER
We hope that you will enjoy your new GreenTec machine.
Kind regards,
John Christensen
Sales Director, GreenTec A/S
At GreenTec, our vision is to develop and sell quality machines for the maintenance of green
spaces, at farms, plants, airports, local government locations etc. Using innovative product
development, we aim to become leading within our field.
We use a simple and functional design for all our machines and work closely with vendors and endusers. It is our goal to cover all market segment needs, preferably providing them with two different
solutions. Using in-depth demand analysis and serious guidance, we strive to provide our customers
with the best possible solution that fulfills all individual needs by means of a modular product portfolio.
Furthermore, we aim to offer the best possible after sales service as well as expedient and efficient
spare parts deliveries.
GreenTec
Hedge Cutter HX 230
6
Useful Information
In connection with the first use of the machine, the seller must ensure that the buyer
receives this User Manual and that they fully understand its contents before they are is
allowed to proceed. If the machine is resold, this User Manual MUST be handed over
to the new owner.
Please insert the following data. Then you will have the necessary information at hand
when you order spare parts or otherwise contact us.
Serial no.
Date of delivery
Vendor
Tel / fax
GreenTec A/S
Merkurvej 25
DK-6000 Kolding
Denmark
Tel: +45 75553644
Fax: +45 75554243
Email: info@greentec.eu
http: www.greentec.eu
Opening Hours: Mon thru Fri 8:00 am to 4:00 pm
GreenTec
Hedge Cutter HX 230
7
EC Declaration of Conformity
adapted EEC Directive
89/392/EEC, 91/368/CEE
The Undesigned, GreenTec A/S, Merkurvej 25, DK-6000
Kolding,
do hereby declare that
Product
Model
Serial no. & Date
Type
that was manufactured by the above-mentioned company
conforms to the relevant guidelines of Directives 89/392/EEC,
98/37/EC and AMD 91/368/EEC, AMD 93/44/EEC, AMD
93/68/EEC and corresponds to European standard BSEN
292, part 1: 1991 Safety of machinery - Terminology,
methodology; part 2: 1991 Safety of machinery -Technical
specifications and other national standards that are
associated with its design and construction as mentioned in
the technical documentation.
On behalf of GreenTec A/S
Signed..................................................................
Title............................................. Date .....................
GreenTec
170 - 230
GreenTec
Hedge Cutter HX 230
8
Safety
Caution
Liquids under pressure.
Please refer to the
Technical Manual for
information about service
procedures.
Caution
Flying objects. Keep
a safe distance from
the machine when in
use.
Caution
Keep a safe distance
from the cutter
knives when the
machine is in use.
Never remove safety
guards / guarded
Caution
Stay outside the swivel
range of the tools.
Caution
Turn off the engine and
remove the key before
performing any
maintenance or repair work
on the machine.
Caution
Check that all bolts and
nuts are tightened every 8
hours.
Caution
Read the User Manual prior
to operating the machine.
Follow all instructions and
safety provisions when using
the machine.
GreenTec
Hedge Cutter HX 230
9
This User Manual contains basic references to construction, operation and
maintenance. Thus, this User Manual should be studied by and made available to the
staff prior to start-up.
Never allow the HX 170 - 230 to be operated or maintained by individuals that are not
familiar with this User Manual or the associated risks. The driver is responsible for and
must monitor the staff. Should the staff not be sufficiently trained, such training must
be provided. Furthermore, the driver must ensure that the staff knows and fully
understands the contents of this User Manual.
Maintenance tasks that are not mentioned in this User Manual must be performed by
authorized technicians only.
Failure to observe the safety signs may result in the following risks:
Danger to people near non-secured work areas
Failure of vital machine functions
Failure of designated methods of maintenance or repair
Danger to people in case of mechanical or chemical impact.
Environmental hazards due to hydraulic oil spills
Never work in the vicinity of the machine unless it is completely stopped. The
procedure mentioned in this User Manual to completely halt the machine must be
followed.
Maintenance work with a raised tool is allowed only when appropriate support
elements have been applied. Use appropriate tools and work gloves when replacing
spare parts.
Oil and grease must be discarded properly and responsibly.
Loading...