Green Lighting Corp GLC-SL32-3565, GLC-SL52-7065, GLC-SL62-14565, GLC-SL82-20065 User Manual

High Power LED Street Light

User Manual

www.mygreenlightingcorp.com

1

Product Information

1. With our unique and innovative modular design, our street lights can be easily configured

for different power and brightness. Every module is an independent light source and can

be interchanged. In the unlikely event of a partial failure it will not affect the normal

operation of the whole lamp. This allows for easy maintenance resulting in substantial cost

savings.

2.High quality secondary optics, eliminate visual fatigue caused by adverse glare of most

normal high-power LED Street light, thereby improving driving safety and minimising traffic

accidents.

3.The use of Direct current (DC) eliminates visual fatigue caused by stroboscopic effects of

traditional street light.

4.Good impact resistance with a strong housing, built to withstand adverse weather

conditions.

5.High CRI, No UV and IR radiation.

6.Significant energy savings.

7.High brightness utilizing a high-power LED light source with a high efficiency power supply

8.Unique lens design using high quality PMMA: 80% PC refractive index 1.594, 20% PMMA

refractive index 1.4932 providing good light coverage.

9.Green and eco-friendly. Our LED Street light are environmentally safe and do not contain

any toxic elements such as lead or mercury.

10.Long Life Span with stable luminous output and excellent heat dissipation.

2

11.Designed to IP67 to ensure the Street Light is Waterproof and Dustproof.

12.Reliable driver circuit design with constant current (power efficiency of >80%).

13.Automatic control: Brightness can be adjusted according to time and external

environment, thereby contributing to energy savings.

Product Specifications:

GLC-SL32-3565

GLC-SL52-7065

GLC-SL62-14565 GLC-SL82-20065

3

Datasheet:

T
y

Number Model GLC-SL32-3565 GLC-SL52-7065 GLC-SL62-14565 GLC-SL82-20065

p
e

1 Input voltage AC 90～264V

2 Frequency range 47～63Hz

3 Power Factor 0.95

Power Efficiency

4

Electrical characteristic

5 Cert. CE

6 Circuit Protection

7 Current Range operating current range<±5% at the rated input voltage

8 LED heat sink 63℃（Ta=25℃）

9

10 LED power

(testingat rated
voltage, load and
room temprature)

short-circuit protection, overcurrent protection, undervoltage protection<76V, overvoltage
protection (280-300V) self-recovery, anti surge, lightning protection and over-temperature
protection

Single LED module

input current

88% 89% 90% 90%

340mA -360mA

28W±10％ 56W±10％ 112W±10％ 168W±10％

11 Total power

12 Dimming function brightness automatically adjust to 70% after 6-hour lighting

1 Lens PC+PMMA hybrid materials

2 LED light angle 120°

3 Color Temperature 4500K-5000K / 2900K-3100K

4 Lumens 82 lm/w

5 CRI ＞70

6 Average illumination

Optics

7

8 Light source LED chip 50mil

9

10

11 Beam angle 120°: horizontal axis 120°, vertical axis 60°

1 Lamp body Aluminum alloy A360 and ADC12, surface treatment: spray gray or blue powder

Structure

2 Dimension 328×223×172mm 515×295×87mm

3 N.W 3.0Kg 7.15Kg

4 Degree of protection IP67

5

6 Storage Temperature -40℃～85℃

7 Operating Humidity 10%～95%R.H.

Effective illuminated
area

Light distribution curve
/ spot

Maximum Light
Intensity Angle

Operating

Temperature

35W±10％ 70W±10％ 145W±10％ 200W±10％

(H=5m)≥22 lux
(H=6m)≥15 lux

(H=5m：16×6m
(H=6m：20×8m

(H=6m)≥30 lux
(H=8m)≥15 lux

（H=6m）：20×8m
(H=8m)：26×10m

asymmetric(bat wing shape)/rectangular light spot

120°: horizontal axis 110°, vertical axis 45°

(H=8m)≥30lux

(H=10m)≥20 lux

(H=8m):26×10m

(H=10m):33×13m

675×295×87mm 835×295×87mm

10.4Kg 14.4Kg

-30℃～40℃

(H=12m)≥20 lux

(H=12m)：40×16m

4

Warnings:

·Please strictly follow the installation instructions . Improper installation may cause electric

shock or Death.

·Warranty will be void in case of damage due improper installation.

·Power should not exceed stated range (rated voltage 90-264V, frequency 47-63Hz),

(Power AC220V must be switched off when wiring, make sure wires are connected

properly. To avoid damage, please do not install lamps right above objects such as stoves,

gas and exhaust channels or any hot objects.

·Ensure only qualified personnel install ,operate and maintain the Streetlamp.

Maintenance

1.change the power supply module, if the whole lamp does not work.

2.change the light source module(needs to be done by a qualified person), if a single LED

does not work.

3.Do not clean the lamps with volatile chemicals such as thinners (acetone) or gasoline,

doing so will damage the lamps and affect the lifespan.

Possible failures and solutions:

Failure Reasons Solutions

Power input terminals are

not connected properly

All the LEDs do not light up

LED flicker Power supply failed Change power supply

Power fuse failed Change fuse

Power output socket is

not connected properly

Re-connect to the power

input terminals

Re-connect to the output socket

a set of LED is dim Power supply failed

Few LED do not light LED damaged Change LED Module

Change power supply or

LED module

5

3

Installation Instruction:

Notice: Please ensure the power is switched off prior to installation.

1. Open the wiring cover , fix the waterproof Socket strip cable to the correct length as ⑤①

shown(Diagram 1&2&3).

2. Fix cable to the lamp body: insert cable into the lamp body and fix the cable to the body by ③

the waterprooof lock nut.

3. Wire connection: connect the power cable as per diagram 6 and connection diagram.

4. Screw the wiring cover in position(Diagram 5).

5. Connect the street lamp with the pole , with 8X M8 screws (Diagram2)⑦②，diameter range of

the light poles: ø40- ø60mm

Diagram 1

.

2

1

Diagram 2

6

Diagram 3

4

L:RED WIRE
N:BLUE WIRE

Diagram 4

Diagram 6

Diagram 5

7

① waterproof Socket M8 screws ② cable③ （input）

④Cable holder cable(lamp) ⑥ pole⑦

Packing:

As per GLC-SL62-14565

Packing

material

Finished

street light

Carton 462*220*142mm 586*375*157mm 746*375*157mm 906*375*157mm

Foam box(top) 445*204*63mm 570*359*46mm 730*359*46mm 890*359*46mm

Foam

box(bottom)

Bubble bag 420*300mm 580*500mm 740*500mm 900*500mm

N.W. 3.0Kg 7.15Kg 10.4Kg 14.4Kg

G.W. 3.5Kg 8.4Kg 11.9Kg 15.9Kg

Accessory: 8pcs X M8 stainless steel screw

GLC-SL32-3565 GLC-SL52-7065 GLC-SL62-14565 GLC-SL82-20065

445*204*63mm 570*359*95mm 730*359*95mm 890*359*95mm

Packing specifications

8