Greenheck Fan SSFSD, SEFSD User Manual

for RRL/OCI (Resettable/Reusable

Upturned Leg Faces

Away From Blade End

#10 x 1/2 in. Tek Screw

or Equivelant

Part No. 415555

2 Req’d

0.166 in. dia. 2 Places

Indicator Bracket Part No. 658594 1 Req’d

#10 x 1/2 in. Te k

Screw

or Equivelant

Part No. 415555

2 Req’d

Upturned Leg

Faces Away From

Blade End

Indicator Bracket Part No. 658594 1 Req’d

1.625

1.750

Indicator Link (short or long; see C) 1 Req’d

Push Nuts 2 Req’d

Gasket 1 Req’d

J-Box Cover 1 Req’d

#10-16 x 3/4 in. SIHWH Screw 2 Req’d

J-Box 1 Req’d

RRL/OCI 1 Req’d

Note: Indicator Link Part Nos. For Standard Sleeve (short): 457808 For Extended Sleeve (long): 457801

RRL/OCI - Exploded View

Airfoil Blade

3-V Blade

Indicator Bracket

Indicator Link

on FSD, SEFSD, SSFSD series

for RRL/OCI ﬁeld kit (part numbers

Steps to install an RRL/OCI in a Fire Smoke Damper:

1) Drill/saw a 3 5/8 in. (92mm) diameter hole in sleeve (Detail 2).

2) Attach indicator bracket to blade. For an airfoil blade dampers, use existing holes in blade (Detail 1-A). For a 3V blade damper, drill two 0.166 in. (4mm) holes (Detail 1-B). Fasten bracket to bladewith #10 x 1/2 in. (13mm) TEK screws (or equilavent).

3) Fit indicator link into blade bracket (Detail 1-C).

4) Insert RRL/OCI unit through hoel in sleeve (round end inside).

5) Place 4 in. x 4 in. J-box over the ﬂange of the RRL/OCI unit and align holes.

6) Mount control box to sleeve/sideplate with #10-16 x 3/4 in. (19mm) TEK screw or equilavent (Detail 1-D).

7) Place one pushnut on the switch wire. Place indicator link on switch wire and secure with a second pushnut (Detail 1-D).

8) Complete wiring and install J-box cover.

Part Number 471836

Installation Instructions

Link with Open/Close Indicator)

852291 & 822468)

Detail 1

Resettable Reusable Link/ Open-Closed Indicator

Note: The switch wires wrapped with a blue marker indicate the closed position of the damper.

Electrical Capacity = 10 AMP (max)

Orange

Black Black White

Yellow

P = Primary Temperature Sensor

Optional Momentary Contact Test Switch

Electric Damper Actuator or Pneu. Solenoid Valve

Damper Indicator LIghts

By Others

Note: Operator Mounted Upside-Down On Steel Airfoil Units From 10 in. to 17 in. (254mm to 432mm) High

Ø3.625

>11" NOM HEIGHT

< 11" NOM HEIGHT

8.375

3.563

SURF ACE

INSIDE

Nominal

Section Height

(in.)

6-7 2.625 2.625

8 3.125 3.125

9 3.625 3.625

10-11 2.625 3.625

12-13 2.625 4.125

14-15 3.125 4.625

16 3.625 5.125

17 4.125 5.625

18 13.125 13.125

19 14.125 14.125

20 14.625 14.625

21 15.625 15.625

22 16.625 16.625

23 17.125 17.125

24 18.125 18.125

25 19.625 19.625

26 20.625 20.625

27, 39-41 21.625 21.625

28, 42 22.125 22.125

29, 43. 57 23.125 23.125

30, 44, 58 24.125 24.125

31, 45, 55-56,

32 26.625 26.625

33, 47 27.625 27.625

34, 46 28.625 28.625

35, 49 29.125 29.125

36, 48 30.625 30.625

37, 51 31.125 31.125

38, 50, 52 32.125 32.125

53 23.625 23.625

54 24.625 24.625

60 4.125 4.125

Style

Steel Airfoil

Style

25.125 25.125

Detail 2

All dimensions shown in inches.

Wiring Diagram

RRL/OCI Rev 1 July 2008