Greenheck Temperature Limited Override TOR User Manual

TOR - Exploded View

Document number 471837

Installation Instructions

for TOR (Temperature Limited

Steps to install an TOR in a Fire Smoke Damper:

1) Drill/saw a 3 (Detail 2).

2) Attach indicator bracket to blade. For an airfoil blade dampers, use existing holes in blade (Detail 1-A). For a 3V blade damper, drill two 0.166 in. (4mm) holes (Detail 1-B). Fasten bracket to bladewith #10 x ½ in. (13mm) TEK screws (or equilavent).

3) Fit indicator link into blade bracket (Detail 1-C).

⁄8

in. (92mm) diameter hole in sleeve

5) Place 4 in. x 4 in. J-box over the ﬂange of the TOR unit and align holes.

6) Mount control box to sleeve/sideplate with #10-16 x3/4 in. (19mm) TEK screw or equilavent (Detail 1-D).

7) Place one pushnut on the switch wire. Place indicator link on switch wire and secure with a second pushnut (Detail 1-D).

8) Complete wiring and install J-box cover.

4) Insert TOR unit through hoel in sleeve (round end inside).

Detail 1

Override)

on FSD, SEFSD,

SSFSD series

#10-16 x 3/4 in. SIHWH Screw 2 Req’d

Upturned Leg Faces

Away From Blade End

#10 x 1/2 in. Tek Screw

or Equivelant

Part No. 415555

2 Req’d

Airfoil Blade

Indicator Link

Note: Indicator Link Part Nos. For Standard Sleeve (short): 457808 For Extended Sleeve (long): 457801

Indicator Bracket Part No. 658594 1 Req’d

Indicator Bracket

Upturned Leg

Faces Away From

Blade End

#10 x 1/2 in. Tek

Part No. 415555

Screw

or Equivelant

2 Req’d

0.166 in. dia. 2 Places

3-V Blade

Indicator Bracket Part No. 658594 1 Req’d

1.625

1.750

Gasket 1 Req’d

Push Nuts 2 Req’d

Indicator Link (short or long; see C) 1 Req’d

TOR 1 Req’d

J-Box 1 Req’d

J-Box Cover 1 Req’d

Nominal

Section

Height (in.)

6-7 2.625 2.625

8 3.125 3.125

9 3.625 3.625

10-11* 2.625 3.625

12-13* 2.625 4.125

14-15* 3.125 4.625

16* 3.625 5.125

17* 4.125 5.625

18 13.125 13.125

19 14.125 14.125

20 14.625 14.625

21 15.625 15.625

22 16.625 16.625

23 17.125 17.125

24 18.125 18.125

25 19.625 19.625

26 20.625 20.625

27, 39-41 21.625 21.625

28, 42 22.125 22.125

29, 43. 57 23.125 23.125

30, 44, 58 24.125 24.125

31, 45, 55-56,

32 26.625 26.625

33, 47 27.625 27.625

34, 46 28.625 28.625

35, 49 29.125 29.125

36, 48 30.625 30.625

37, 51 31.125 31.125

38, 50, 52 32.125 32.125

53 23.625 23.625

54 24.625 24.625

60 4.125 4.125

Style

Steel Airfoil

Style

(D)

25.125 25.125

(D)

Detail 2

INSIDE

SURF ACE

Wiring Diagram

8.375

3.563

Ø3.625

All dimensions shown in inches.

< 11" NOM HEIGHT

>11" NOM HEIGHT

* Note: Operator mounted upside down

on steel airfoil units from 10 in. to 17 in. (254mm to 432mm)

TOR Rev 4 March 2015