Application
T-249 electrical transformer is used to supply low voltage
power to operate control equipment. This transformer
converts primary voltage of 480V/277V, 240V/208V, to
secondary voltage of 120V. T-249 is shipped loose and
is provided with a plate on the primary side for mounting
on a standard 4 in. outlet box. For hookup to 3 phase
primary source, connect common (white) and one other
wire (same voltage as 3 phase source) to any 2 legs of the
3 phase source for 1 phase 120 volt secondary output. This
transformer is NEMA 1 for indoor use only.
Note: Transformers are shipped loose.
T-249 Transformer
Capacity
(VA)
50 50/60 480/277,
Frequency
(Hz)
Primary
Voltage
240/208
Secondary
Voltage
120V -30° to 140°F
Operating
Temperature
Copyright © 2007 Greenheck Fan Corporation
T-249 Transformer rev. 1 May 2007