Greenheck Latch Release Tool User Manual

Document Number 459019

®

1. Insert tool as shown, near the end of the blade.
Push the tool against the blade and rotate.

Latch Release Tool Instructions

for Fire Dampers

2. To disengage the blade from the blade latch, pull
the tool until the blade is out of the latch.

3. While holding the released end of the blade out of
the blade latch. Repeat the process on the other end
of the blade until its released.

Our Commitment

As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in
the Library under Warranties.

®

Phone: [phone] • Fax: [phone] • E-mail: [e-mail] • Website: www.greenheck.com

459019• Latch Releae Tool Rev. 1, June 2013 Copyright 2013 © Greenheck Fan Corporation