Greenheck EES-401 User Manual

Horizontal Screen

Inverted Blade

Application and Design

EES-401 is 4 in. deep equipment screen designed to inhibit vision from grade or lower elevations while also serving as a protective barrier. Design incorporates extruded aluminum inverted horizontal blades attached to vertical support members. The EES-401 can be supplied with either mitered or boxed corners and man-doors in order to meet aesthetic and service specifications.

Standard Construction

Material . . . . . . .6063-T5 extruded aluminum

Screen depth . .4 in.

Blades . . . . . . . . Inverted horizontal, 6063-T5 extruded

aluminum, 0.081 in. nominal thickness spaced on 5 in. centers

Reinforcing . . . . Rear vertical Z-supports shall be designed to

meet 25 psf windload. Consult Greenheck for higher windload capabilities.

Construction . . .Mechanically fastened

Finish . . . . . . . . . Mill

Maximum Single Section Size . . . 72 in. W or 144 in. H or 144 in. W or 72 in. H

EES-401

Options (at additional cost)

• Welded construction

• Jamb closure

• Jamb frames

• Mitered or boxed corners

• Man-doors

• A variety of architectural finishes including: Clear anodize Integral color anodize Baked enamel paint Kynar paint

Performance (4 ft.x 4 ft.)

Free Area . . . . . . 8.23 sq. ft. (51.4%)

EES-401PRODUCT DETAILS

Horizontal Screen

Inverted Blade

FINISHES

Finish Type Description/Application Color Selection

2-coat 70% KYNAR 500®/HYLAR 5000® AAMA 2605 –

Dry ﬁ lm thickness 1.2 mil. (AKA: Duranar®, Fluoropon®, Trinar®, Flouropolymer, Polyvinylidene Fluoride, PVDF2)

2-coat 50% KYNAR 500®/HYLAR 5000® AAMA 2604 – Dry ﬁ lm thickness 1.2 mil. (AKA: Acroﬂ ur®, Acrynar®)

Baked Enamel AAMA 2603 – Dry ﬁ lm thickness 0.8 mil. (AKA: Acrabond Plus®, Duracron®)

Integral Color Anodize AA-M10C22A42 (>0.7 mil)

Clear Anodize 215 R-1 AA-M10C22A41 (>0.7 mil)

Clear Anodize 204 R-1 AA-M10C22A31 (0.4-0.7 mil)

Industrial coatings

Mill

“Best.” The premier ﬁ nish for extruded aluminum. Tough, long-lasting coating has superior color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering.

“Better.” Tough, long-lasting coating has excellent color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering.

“Good.” Provides good adhesion and resistance to weathering, corrosion and chemical stain.

“Two-step” anodizing is produced by following the normal anodizing step with a second, colorfast process.

Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack.

Greenheck offers a number of industrial coatings such as Hi-Pro Polyester, Epoxy, and Permatector®. Consult a Greenheck Product Specialist for complete color and application information.

Materials may be supplied in natural aluminum ﬁ nish when normal weathering is acceptable and there is no concern for color or color change.

Finishes meet or exceed AAMA 2605, AAMA 2604, and AAMA 2603 requirements. Please consult www.greenheck.com for complete information on standard and extended paint warranties. Paint ﬁ nish warranties are not applicable to steel products.

Standard Colors: Any of the 24 standard colors shown can be furnished in 70% or 50% KYNAR 500®/HYLAR 5000® or Baked Enamel.

2-Coat Mica:

Greenheck offers 9 standard 2-coat Mica colors. Other colors are available. Consult Greenheck for possible extra cost when selecting non-standard colors or special ﬁ nishes.

Light, Medium or Dark Bronze; Champagne; Black

Clear 5 years

Clear 1 Year

Standard Warranty

(Aluminum)

10 Years (Consult Greenheck for availability of extended

warranty)

5 Years

1 Year

5 years

Consult Greenheck

n/a

EES-401

May 2010 Rev. 1

Greenheck Fan Corporation reserves the right

to make product changes without notice.