Greenheck AX Pitch Protractor User Manual
Instructions:
• Follow Blade Pitch Adjustment Procedure as outlined in the AX High Performance
Axial Installation, Operating and Maintenance Manual (Part #464664).
• Align protractor template edges to corresponding axes shown on Pitch Protractor
(next page).
• Place leading edge of the blade on the protractor crosshair as shown. Identify
current pitch by locating degree line the trailing edge lies on. (Example has
22º pitch).
• Adjust blade to desired angle while maintaining leading edge on the crosshair. This
requires repositioning the pitch protractor.
• Use a marker to trace blade profile on Pitch Protractor or fan casing.
• Adjust remaining blades to the traced profile.
• Tighten blades as directed in the AX High Performance Axial Installation, Operating
and Maintenance Manual (Part #464664).
• Remove Pitch Protractor from fan casing.
Note: The blade outline is for a counter-clockwise AX fan.
Clockwise model blades have trailing edge of the blade
at the crosshair and leading edge on degree line.
Pitch Protractor for Model AX
Warning: Pitch Protractor for Model AX must be printed
at 100% on either 11x17 (Tabloid) or European Standard
A3 paper size.
®
ALIGN THIS EDGE TO FAN CASING AXIAL LINE
35º
30º
25º
22º
20º
15º
10º
5º
0º
ALIGN THIS EDGE PARALLEL TO FAN CASING EDGE
Pitch Protractor for Model AX
Fan Blade Casing Edge
Parallel
Axes
ALIGN THIS EDGE TO FAN CASING AXIAL LINE
Exploded View
Fan Axial Line
Parallel Axes
Blade Protractor
35º
30º
25º
20º
15º
10º
5º
ALIGN THIS EDGE PARALLEL TO FAN CASING EDGE
0º
Loading...