Green Gorilla ProLine PowerPack X Owner's Manual

1
ProLine™ PowerPack X
Owner’s Guide
Warning and Cautionary Statements
Warning: Follow all instructions for your ProLine tank as well as any chemicals being used.
Warning: Inspect the charger cable and connector for wear or other signs of damage. A badly worn charger cable or damaged connector may interfere with charging. Contact your authorized distributor for information about charger replacement.
Warning: Never charge the PowerPack in temperatures below 32° F or above 110° F. This can result in battery damage and/or re.
Warning: It is imperative that the original charger for the Green Gorilla system is used as dierent chargers may not have the built in protection necessary to ensure a safe charging condition.
Caution: Do not store outdoors or leave PowerPack in the rain. PowerPack is water resistant but not water proof.
Warning: Do not charge the PowerPack in the rain or damp location. Charge in warm, dry location only.
!
!
!
!
!
!
!
Rest the bottom of the PowerPack on the bottom of the tank’s PowerPack mount­ing recess (as shown above in gure 1) and tilt upwards into the pocket and engage the quick connect tting (as shown below in gure 2), until a positive click is heard. PowerPack is now ready for use.
g. 1 g. 2
PowerPack Attachment
PowerPack Removal
The PowerPack MUST be removed correctly or damage may occur. To remove the PowerPack from the tank, rotate the release knob in the COUNTERCLOCKWISE direc­tion until the knob indicator is in-line with the arrow on the housing (gure 3). Pull the PowerPack away from the tank to fully remove (gure 4).
DO NOT attempt to pull the PowerPack o without rst rotating the knob.
Note: the knob is spring loaded, and will automatically reset when released.
30°
g. 3
g. 4
PowerPack Charging
g. 6
g. 5
This unit is equipped with the latest in lithium ion power technology. Ensure that you are only using the Green Gorilla 110Vac charger that came with this unit. The charger has been matched to the solid state electronics within the PowerPack itself to ensure safe and reliable charging.
IMPORTANT! A safety interlock system incorporated into this system will not allow the PowerPack to operate when the charger plug is engaged.
The wall charger is equipped with an indicator light that indicates when your system is fully charged. The indicator light (as shown in Figure 5) is red during charging periods and turns green when the lithium ion cells are fully charged. The following steps should be used when charging your PowerPack.
Note: It may take up to 1 minute for the charge indicator light to change to the correct color.
Indicator
Light
Loading...
+ 2 hidden pages