GreenBrook LEDDLTC3000PC, LEDDLTC4000W, LEDDLTC3000W, LEDDLTC4000SC, LEDDLTC3000SC Installation Instructions
...
Installation Instructions for:-
Vela Compact’ Range
‘
LED 30, 60 & 90 Mins
Fire Rated Mains Voltage
Dimmable Downlights
Part numbers:
Fixed:- LEDDLC3000W & LEDDLC4000W
Tilt:- LEDDLTC3000W, LEDDLTC4000W
LEDDLTC3000SC, LEDDLTC4000SC
EDDLTC3000PC, LEDDLTC4000PC
L
MPORTANT INFORMATION
I
It is recommended that luminaires are installed and fitted
by a qualified electrician ensuring the installation complies
to the current IET wiring regulation.
If simply replacing existing fitting, please ensure you follow
these instructions and the appropriate wiring regulations.
This product is designed for connection to a 230V AC
Mains supply.
Always switch off mains supply before servicing a fitting.
Special attention should be paid to any installations with
low ceiling voids.
This fitting is compatible with most leading and trailing
edge dimmers for best results use a dimmer designed for
LED drivers.
Please note that many dimmers have a minimum load
requirement which may mean multiple units have to be
connected for the dimmer to function correctly.
Please see our website at www.greenbrook.co.uk for
details of compatible dimmers.
INSTALLATION INSTRUCTIONS
We recommend that a sample hole is cut in some scrap
material to familiarise yourself with the installation.
Once you are completely satisfied, locate the areas
suitable to install these luminaires. Cut a suitable round
hole in the ceiling (see cut out size in table overleaf) and
ensure there is sufficient space in the ceiling void without
infringing on joist, water pipes or electrical cables.
Fit this product as illustrated in Dia 1 & 2. Connect this
product to a mains 230V supply only.
Driver is class 2 and does NOT require an earth
connection.
The nearest illuminated sur face must be at least 0.5m
distance away from the front of the fitting.
Do not install this product into new plaster or damp areas.
Stage 1 -
Read instructions and check you have all the tools and
accessories to complete installation correctly.
Dia.1
Stage 2 -
These luminaires are suitable for a 30, 60 or 90 minute fire
rated ceiling only.
Cut a suitable hole (sizes shown in the technical
information table overleaf).
Dia.2
Stage 3 -
Press springs back and push luminaire body into aperture.
Connect the luminaire to the supplied driver.
Dia.3
Dia.4
dditional Bezels:-
A
ixed
F
EDDLCBEZSC Satin Chrome
L
LEDDLBCEZPC Polished Chrome
ilt
T
Bezels on tilt fittings are not inter changeable
TECHNICAL INFORMATION
Rated Voltage: 230V～50Hz
ircuit Wattage: 7W
C
Ballast Type: LED driver
lass: II
C
urrent: 350mA
C
CRI: >80
IP Rating: IP65
Life Span: 30,000 hours
Conforms to: Part B, C, E & L
LEDDLC3000W
Cut Out: 60mm
Colour Temp: 3,000K
Luminaire Lumens Output: 600 lm
Beam Angle: 55º
LEDDLC4000W
Cut Out: 60mm
Colour Temp: 4,000K
Luminaire Lumens Output: 620 lm
Beam Angle: 55º
LEDDLTC3000W/LEDDLT3000SC/LEDDLTC3000PC
Cut Out: 76mm
Colour Temp: 3,000K
Luminaire Lumens Output: 600 lm
Beam Angle: 40º
LEDDLTC4000W/LEDDLTC4000SC/LEDDLTC4000PC
Cut Out: 76mm
Colour Temp: 4,000K
Luminaire Lumens Output: 620 lm
Beam Angle: 40º
(FIXED)
IP44
(TILT)
Your GreenBrook LED Fire Rated Downlight
is guaranteed for 3 years from the
This is in addition to your statutory rights.
GUARANTEE
date of purchase.
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
info@greenbrook.co.uk
www.greenbrook.co.uk
Issue no: 705128
EMC
Loading...