Active - 30mA
Safety RCD Single Socket Operating Instructions
R
YOU
FOR
–
T
AN
T
OR
P
M
I
OTECTION.
R
P
tric
Elec
CD
R
an
titute f
ubs
a s
aution
rec
p
un
s
Alway
bef
ly
p
up
s
air to eq
or rep
ot allow c
n
with elec
dev
This
t liv
s
again
leakage
rotec
ot p
n
dan
is
ity
t n
mus
or n
meas
ary
lug f
p
ore an
hildren
al dev
tric
e will p
ic
e an
to earth, it will
aults
f
t again
gerous
ot be us
ormal
ures
rom main
s
in
y
men
uip
to tamp
es
ic
rote
eutral
d n
t ele
s
p
t.
.
c
an
ed as
.
ec
D
t
tric
c
tion
shock due to contact with both
conductors, short circuits
d
between live and neutral, or a
fault in the wiring supplying this
device.
TO FIT THIS POWERBREAKER
SAFETY RCD SOCKET –
s
Switch off the power supply at
the mains. Fit metal back box
o
then simply connect using the
er
easy to follow wiring diagram.
Blue or
Black (N)
M
ains
Supply
Brown 0r
R
ed (L)
G
reen/Yellow (E)
If earth conductors are bare,
they must be sleeved with
appropriate green/yellow
sleeving.
If you are in any doubt about
connecting this product
consult a qualified electrician
Wiring insulation tests should
be completed before setting the
PowerBreaker RCD Socket to
avoid misleading instrument
readings and possible
internal damage to the unit.
PLEASE CARRY OUT THIS
SIMPLE TEST PROCEDURE
PRIOR TO EACH USE.
1. Press Blue ON button.
2. Clear window indicator
around Blue button will turn
Red and illuminate*.
3. Press Grey Test button (T).
4. Red window indicator and
illumination will disappear*.
This means the RCD has
tripped successfully.
5. To reset – press Blue ON
button and use as a normal
socket.
* If indicator fails to work, do
not use and return to
place of purchase.
NOTE 1:
If the red window indicator
disappears once the socket has
been reset and appliance is
firmly plugged in the socket,
this may mean that the
appliance or the cable lead is
faulty, and should be checked
by a qualified electrician.
NOTE 2:
Remove this RCD from
circuit before performing any
high voltage insulation tests.
Note: This is an active device and will need resetting in the event of power loss.
To reset - Press the Blue ON button.
Loading...