GreenBrook DR10, GR10 User Manual

perating Instructions
O
for 10M Rod Kits
DR10 & GR10 (Luminescent)
SAFETY
PLEASE NOTE -
Fibreglass is a mild irritant to those
ith sensitive skin. Wearing gloves is
w recommended when using the rods. If you have a reaction (redness or
ild itching) wash your hands
m throughly. If the reaction persists for longer than 48 hours consult a doctor.
INSTRUCTIONS
To maintain the integrity and flexibility of this product it is essential to keep the threaded parts fully mated. Failure to do so may cause the threads to snap and invalidate the warranty.
Keep threads free of dust and debris. Regularly clean them with a stiff brush.
Do not lubricate the threads as this will attract debris and/or allow rods to easily unscrew.
If the rods get caught on an obstruction do not force them. Gently ease the rods back and forth. If the rods meet an obstruction e.g. a joist, try ‘flicking’ them to make the end ‘jump’ over.
REPAIRS
Cleanly cut off damaged part of rod.
If necessary carefully drill/ream out any fibreglass and/or residual glue from the metal end.
Glue the metal end onto the rod with a good quality super glue.
All Rod measurements are nominal.
We reserve the right to change the design and specification to improve quality and enhance performance.
RECOMMENDED MINIMUM
BEND RADIUS OF JOINED RODS
If joined rods are bent beyond the following recommended rates of bend, the rod and/or brass fitting may be damaged as a result of bending.
)
m
m
0
2
adius
R
(2
SHORT RODS
Shorter rods will flex to the same bend radius as above but greater care must be taken because of the increased stiffness caused by metal end fittings.
WARNING -
DAMAGE CAN BE CAUSED BY OVER
BENDING RODS
TIPS AND TRICKS
When drilling a hole through to a restricted cavity, angle the hole in the direction you want the rods to go. It will reduce the bending load and minimise the chance of the rod end catching.
Always rotate connected rods clockwise to avoid them unscrewing in use.
Use the most appropriate cable handling accessory.
A flexi lead should be employed to help ease rods round corners.
The way in which you use your rods is limited only by your imagination!
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
GUARANTEE
Your Norslo Draw Rod Kit
is guaranteed for 1 year from
This is in addition to your statutory rights.
the date of purchase.
WEST ROAD . HARLOW ESSEX . CM20 2BG . UK
info@greenbrook.co.uk
www.greenbrook.co.uk
Issue no: 705305
Loading...