Green Bike Electric Motion Big Dog Off Road HF 201-48N Instruction Manual

Customer Service: Green Bike – Electric Motion LLC
Main Office: 7057 Reseda Blvd ,Reseda CA 91335
Phone: (818) 578-3665
Email: office@GreenBikeElectric.com
Website: GreenBikeElectric.com
Folding(Electric(Bicycles(MODEL HF 201– 48N
$
Instruc4on$Manual
Green Bike – Electric Motion Congratulations on you're newly purchased!
Joining Greenbike’s Go Green revolution will open your doors to a whole new world of freedom!
Green Bike – Electric Motion greatly values the quality of our products, giving you value for your
money, friendly and professional service, and safety for the rider above all else.
Please uphold the product-customer-importer relationship to ensure a quality experience over time. In this manual, you will find all the details required to maintain product care.
To ensure safety during riding and to maintain long-term usage experience, please read all instructions carefully before using the bike, and follow the specified maintenance and usage instructions.
Thank you for choosing Green Bike – Electric Motion !
- For your safety obey traffic and signage instructions!
- Do not allow an additional rider on the bike. This bike is designed to carry one person only.
Any damage to the bicycle resulting from an additional rider is not covered under warranty!
- The height of the seat and handlebars should be adjusted for maximum comfort and control
- The seat post and handlebars have a safety strip. Be sure it is not visible when adjusting. If the strip is not set correctly, excess pressure will be created and damage the cables.!
!
- Be sure that the locking hinges of the seat and handlebars are locked before starting the trip.
- Check the condition of the brakes frequently and adjust when necessary. Braking range on a dry road is 13 feet and on a wet road can reach 50 feet. Keep more distance on a wet road.
- The chain is properly adjusted and should not be altered. The chain must be lubricated to prevent accelerated weathering.
- At night, the headlight and backlight must be switched on by a switch on the control display.
- Be sure to wear appropriate clothing and do not carry objects or bags in a way that they can be caught in the wheels or chain. To keep the rider safe - do not bring your legs together (too close to the chain) more than necessary.
- Do not ride in weather that does not allow safe riding such as rain, puddles, strong winds, snow, etc.
- When stopping, use both brakes. Do not be content with one brake. Use both brakes together in order to maintain stability and achieve greater control.
- Do not ride under the influence of alcohol, drugs or substances that affect the rider's alertness.
- When riding, you must hold both handles, do not perform stunts and reckless turns without examining the area from all sides before proceeding.
- Please follow local and state regulations.
- Do not drop the bike on the ground (due to the sensitivity of the battery, motor and controller). The bike should be placed on the kickstand carefully.
- Do not jump or climb sidewalks on the road.
Folding the Bike!
- The bike can be folded for storage at home or in the trunk of the car.!
- The folding time is only 10 seconds. You can get a demonstration at the point of purchase or watch a tutorial video on our site www.
GreenBikeElectric.com
Before You Start to Ride!
Raise the seat as shown in figure 3 and insert the battery into place and lock it.
!
Picture 3 Picture 4
LCD-S900 E-bike Intelligent Display Manual
1. Overview$of$S900$
1) UART protocol:
Equipped with independent press buttons
2) Speed
Real-time SPEEDMAX SPEED Average SPEED
3) Kmh/mile
Kmh/MPH according to habit
4) Battery level
Indicates the battery level in real time
5) Head light control
Press button to power on/off
6) Back light adjustment
3-level adjustment
7) Assist level
From 0 to 5, press button to change assist level, 0-no assist, 5-default value
8) Distance
ODO/Trip/Driving duration
9) Error code
Please refer to appendix table 1 for definition
10)6km mode
In this mode, it will display “WALK” on the screen
11)Parameter setting
Set parameters, such as: wheel size, speed limit etc.
2. Presentation of screen
!
1)Speed: Average SPEED/MAX SPEED/Real-time SPEED
2)Speed unit: Kmh/MPH
3)Battery level: 5 levels, voltage interval could be customized
4)Head light icon indicates when head light and back light are on
5)Error code “ERROR” and code when there is error
6)Assist level actual assist level 0~5, 0 –no assist, 1- ECO, 2,3-STD4,5-POWER)
7)Distance Trip/ODO
8)6km mode
3. Press button definition
LCD-S900 uses independent press button, in total three buttons:
! “UP”! “MODE”! “DOWN”
4. Operation instructions
1) Power ON/OFF
When the power is off, Long press ! MODE during 3 seconds screen will display all
contents and start to normal working mode, and controller will be turned on
When the power is on, Long press ! MODE during 3 seconds screen will be powered offhand controller will be turned offIf no any operation both on bike and display
during 10 minutes (time could be set), the display will turn off automatically, in this case, no power consumption for both display and controller
!
Figure 1
2) ODO/TRIP
Short press ! to switch ODO/TRIP Trip (Single trip distance) ODO (Accumulated distance)
!
Figure 2 Figure 3
3) Assist level
Short press ! or ! to change assist level default value is level
!
4) Different Speed display:
Long press ! and ! to switch different speed information, real time speed
(SPEED Max speed (MAX SPEEDAverage speed (AVGSPEEDDriving Time
!
5) Head light control
Long press ! turn on/off the head light
!
6) 6km mode
When the bike is stopped, long press ! , will enter 6km/h mode, the speed will be
4.5~7.5km/h according to different road conditions, “WALK” will show up on screen, long
press again ! or short press ! ,will quit 6km/h mode. Long press or short press could be customized by clients.
!
Loading...
+ 16 hidden pages