Green Air Products Bio-Genesis Liquid Sand MSDS User Manual

Green Air Products, Inc.

Liquid Sand™

Material Safety Data Sheet

SECTION 1 - IDENTIFICATION OF PREPARATION

Product name: Liquid Sand

Application: Plant mineral supplement

Manufacturer Identification:

Green Air Products, Inc. PO Box 1318 Gresham, OR 97030

SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS

Chemical composition: Chemical Information:

Potassium Silicate - 13.5-14.5% by volume CAS No.: 1312-76-1 , EINECS: 215-199-1

OSHA-PEL: none established ACGIH-TLV: none established NIOSHA-REL: none established

SECTION 3 - HAZARD IDENTIFICATION/HEALTH EFFECTS

Do not get in eye. Material will induce burning pain of the eyes, redness and tearing. Material may cause burning or itching in nose and throat if inhaled. Material may induce slight itching or buring on skin.

SWALLOWED: EYE: SKIN: INHALED: CARCINOGENICITY:

May irritate esophagus and stomach is swallowed Causes eye irritation Potential skin irritant May cause irritation to upper respiratory track if inhaled This material is not listed (IARC, NTP, OSHA) as a cancer causing agent.

SECTION 4 - FIRST AID MEASURES

SWALLOWED: If swallowed, DO NOT induce vomiting. Get medical

attention immediately. If victim is conscious, give a plenty of water to drink. Never

EYE: If in eyes, immediately flush eyes with plenty of water for at

least 15 minutes. Get medical attention immediately if irritation

ersists.

SKIN: In on skin, flush with plenty of water. Remove contaminated

clothings. Get medical attention if irritation persists.

INHALED: If inhaled, remove victim to fresh air. If not breathing, give

artificial respiration. Get medical attention if any irritation and

of the throat developes.

NOTE TO PHYSICIAN:

burnin Treat symptomatically as indicated for exposure to alkaline substances. Asthma, lung diseases and skin conditions may be aggravated by exposure

ive anything by mouth to an unconscios

SECTION 5 - FIRE FIGHTING MEASURES

FLAMMABILITY: EXTINGUISHING MEDIA:

HAZARDOUS DECOMPOSITION MATERIALS:

Non-flammable. Not a fire hazard. Use media suitable to extinguish source of fire.

Hydrogen gas

SECTION 6 - ACCIDENTAL RELEASE MEASURES

In case of accidental spill or release:

Spilled material will be slippery. Use sand, clay or earth (dirt) to contain spilled material; then sweep up and dispose of solid waste in accordance with State and local requirements. Do not allow spilled material to run off and contaminate storm sewers, ditches or natural waterways.

SECTION 7 - HANDLING AND STORAGE

HANDLING:

STORAGE:

Avoid contact with eyes, skin and clothing. Avoid breathing spray mist. Keep container closed. Were eye protection when using this product. Keep container closed. Store only in original container and away from acids, reactive metals and ammonium salts. Storage out of direct sunlight and at temperatures above freezing. Storage temperature: 30-200ºF (0-95ºC).

SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION

ENGINEERING CONTROLS: PERSONAL PROTECTION:

Ensure adequate ventilation when using this product. Wear eye protection. Gloves recommended.

SECTION 9 - PHYSICAL/CHEMICAL PROPERTIES

APPEARANCE and ODOR AUTOIGNITION TEMPERATURE: BOILING POINT: EXPLOSION LIMITS: FLASH POINT: FREEZING POINT MELTING POINT:

H: SOLUBILITY IN WATER: SPECIFIC GRAVITY:

APOR DENSITY: VAPOR PRESSURE:

Clear to hazy white liquid, with little to no odor. none >212ºF (100ºC) n/a n/a 32ºF (0ºC) n/a

11.5 Complete

1.065 not established not established

SECTION 10 - STABILITY AND REACTIVITY

STABILITY: REACTIVITY:

Stable Generate heat with mixed with acids. May react with ammonium salts resulting in ammonia gas. Flammable hydrogen gas may be generated upon contact with aluminum, tin, lead and zinc.

+ 1 hidden pages