GreeenTek Whole House HS 3.0 Installation, Maintenance And Operation Manual
INSTALLATION / MAINTENANCE / OPERATION
GUIDE
WHOLE HOUSE HEPA FILTRATION SYSTEMS
MODEL HS 3.0
Table of contents
PAGE
2
1.1 Unpacking and inspection 2
1.2 Technical data 3
2.1 Planning the installation 4
2.2 Type of installation: Return to Return 4
2.3 Type of installation: Stand-Alone 5
2.4 Installing the unit 6
3.1 General Operating Information 9
4.1 Changing filters 10
4.2 Cleaning unit 10
INFORMATION FOR INSTALLERS PAGE
2.Installation Guide
INFORMATION FOR THE HOMEOWNER PAGE
3.Owner’s Operation Guide
GENERAL MAINTENANCE INFORMATION PAGE
4. Maintenance Guide
1.1.Unpacking and inspection
Box Content
Includes:
• Whole House HS 3.0
• Power cord, 5 FT
• Plenum seal, 7.5 FT
• Screws, (16) 8 x 32 x 1/2”
• Template
GENERAL INFORMATION PAGE
1.Getting Started
About Us
Imperial Air Technologies Inc. is the only manufacturer that offers you a complete range of products
designed to improve indoor air quality, and that
provides a wide selection of accessories to facilitate
installation.
Our vision – To offer a complete range of Greentek
TM
products that satisfy environmental concerns.
Whether your needs involve ventilation, purification,
humidification or filtration, GreentekTMhas the
customized solution for you, with its range of quality
products backed by the best warranty in the industry.
Greentek
TM
Peace of Mind
Limited
WARRANTY
All GreentekTMproducts are backed by the best
limited warranty in the industry, for your peace
of mind.
You benefit from a 10 year warranty (5 years + 5
years prorated) on our motorized impeller and a
5 year warranty on other components including:
unit’s casing, motor bracket and collars.
So you can breathe easy.
1.2. Technical Data
PAGE
3
Dimensions and Clearance
installation
Back View
Front View Side View - Clearance
Side View
Front View
Side View - Clearance
Return Air Plenum and Stand Alone Installations
*
With Collar Mount Kit
IMPORTANT INFORMATION
Imperial Air Technologies, Inc.reserves the right to modify a product, without
prior notice, whether in design, color or specifications, in order to offer at all
times a quality product that is highly competitive. • Please consult local
authorities to find out whether the installation of electrical products requires
the services of a certified technician or electrician.
22” (559 mm)
13”
(330mm)
17”
(432 mm)
17”
(432mm)
17”
(432 mm)
12”
(305 mm)
11.587”
(294.5 mm)
Return Air Plenum Installation
12”
(305 mm)
11.587”
(294.5 mm)
22” (559 mm)
* Installation requires kit No.100608
Stage 1
Stage 3
Stage 2
Stage 1
Stage 3
Stage 2
Specifications
Model HP500
Filtration Stage 1 Prefilter (100511)
Filtration Stage 2 Carbon Filter (100512)
Filtration Stage 3 HEPA filter (100510)
Weight 28 lbs (12.7 kg)
Plenum Mount Port Openings 16” x 3.5” (406mm x89mm)
Collar Mount Port Openings 8” (203mm) Round*
Installation type Plenum,Wall* or Floor*Mounted
Electrical Supply 120 VAC @ 60 Hz
Power Consumption 134 W
Certification
C
CSA
US
Air flow data 220-300 CF.M.
Return
Air Plenum
Forced Air Heating/Cooling System
Forced Air Heating/Cooling System
To living
space
PAGE
4
Special
Consideration
For integrated system installation
•Verify clearance on the ductwork to
mount the unit using the Forced Air
heating/cooling system
• Minimum clearance requirements for
maintenance and service
• Electrical power requirements
• Interaction between the HEPA filter unit
and other mechanical devices.
Ducting Flair
System
installation
The Whole House HEPA Filtration system is
designed to install directly onto the return
air plenum of the forced air heating/cooling
system. Choosing this type of installation
eliminates the need to externally duct the
HEPA filter unit to the plenum system. If you
choose this type of installation, it is
recommended that you run the fan on your
forced air system continuously to maximize
its cleaning ability.
TIPS
to installer
The Whole House HEPA Filtration system
does not replace the filter from the forced
air heating/cooling system. Regular
maintenance of this filter is necessary to
permit the good operation of the forced air
heating/cooling system.
Optional collar
system
installation
Using kit no. 100608 the Whole House HEPA
Filtration system can be converted to use 8
inch round collars for application requiring
ducting. The kit includes two, 8 inch round
collars, two mounting brackets for wall or
floor mounting, installation guide and fasteners.
2.2
Type of Installation:
Return to Return Integrated System
2.1 Planning the Installation
The Whole House HEPA unit is a versatile appliance with multiple installations
configuration. It is recommended to take your time in planning the installation.
Several Installations are illustrated herein’ for Whole House filtration applications:
•Return to return integrated with the forced air
heating/cooling system.
• Central draw points using dedicated duct system
•Consult the manufacturer for other special applications.
Ducting Flair System
(Hepa Mounted on Duct)
INSTALLATION SHOULD BE PERFORMED BY A CERTIFIED PROFESSIONAL.
Consult your HVAC product manufacturer if the usage of this product will affect the performance of
your forced air heating / cooling system.
Optional Collar System
(Hepa Mounted on Wall)
Return
Air Plenum
To living
space
Installation GUIDE
2. Information for the Installer
Loading...