Gree RIO09HP115V1A, RIO12HP115V1A, RIO12HP230V1A, RIO09HP230V1A, RIO18HP230V1A Technical Product Manual

RIO

Ductless Mini-Split Heat Pump 9,000– 24,000 BtuH

Technical Product Guide

Compact & Quiet Solution

Table of Contents

1.0 PRODUCT OVERVIEW 3

2.0 FEATURES AND BENEFITS 3

3.0 PRODUCT NOMENCLATURE 6

4.0 AHRI CERTIFICATION 6

5.0 SYSTEM FEATURES 7

6.0 USER CONTROL FUNCTIONS 8

7.0 SYSTEM PERFORMANCE 9

8.0 SOUND DATA 12

9.0 ELECTRICAL DATA 13

10.0 MAJOR COMPONETS & WEIGHTS 14

11.0 DIMENSIONAL SPECIFICATIONS 15

12.0 CLEARANCE SPECIFICATIONS 21

13.0 EXTENDED PERFORMANCE RATINGS 22

14.0 ELECTRICAL WIRING 28

15.0 CONDENSATE REMOVAL 29

16.0 PRODUCT LIMITED WARRANTY 30

2

PRODUCT OVERVIEW

Compact, quiet and provides unmatched comfort in any room.

The Gree Rio High-Efficiency Duct-free Mini-Split Heat Pump system is compact, quiet & provides unmatched comfort in any room. This system includes an indoor cabinet, outdoor compressor, wireless remote and remote cradle. Without needi ng duct work, installation is simple, fast & cost effective. In addition The Gree Rio provides quiet comfort & improved efficiency by eliminating heat loss inefficiencies of conventional central air conditioning systems.

FEATURES AND BENEFITS

HIGH EFFICIENCY G-10 INVERTER - The G10 Inverter uses a broad range of variable frequencies to drive the compressor, marking the highest level of inverter control technology available today. Unlike conventional technology that generally regulates room temperature by running at maximum capacity and then shutting off completely, G10 Inverter technology eliminates these harsh starts/stops. This cutting edge functionality results in quicker arrival at desired temperatures and superior maintenance of consistent comfort levels. Hi gher efficiency and significant energy sav ings? Yes, it yields those too.

HEAT PUMP ADVANTAGE – Gree heat pumps, powered by the G10 Inverter, provide the same heating capacity as electric heat, while using as little as 1/3 the electricity.

WHISPER QUIET - Not only is the Rio systems energy efficient, it’s quiet too. Wall mounted units operate with sound levels starting as low as 32 dB(A).

INTELLIGENT DEFROST - The Intelligent Defrost function increases room comfort and saves energy by eliminating unnecessary defrost cycles. In heating mode, the control system monitors the outdoor coil for frost buildup, and the system switches to defrost mode only when frost buildup is actually detected. This avoids unnecessary and wasteful defrosts.

LOW VOLTAGE START UP – Having stable electrical power is not always an option. The Gree system will operate from 170v to 253v (230v model) and 104v to 127v (115v models) which is suitable for unstable power supply areas.

SUBTLE APPEARANCE -Designed for a comfortable fit in virtually any living space. This slim compact cabinet sits inconspicuously on the wall, and blends into most interior designs

3

FEATURES AND BENEFITS (Cont.)

UNIT DISPLAY – Rio wall mounted units have a lar ge easy-to-read display and indicator lights giving instead feedback on room setpoint, operating mode and much more. The display can also be turned off based on your personal preference.

MULTI-SPEED FAN – The indoor fan can run at up to four different speeds (Low, Medium, High or Turbo) for either COOLING or HEATING mode for maximum comfort an d quiet operation.

TIME GUARD - Among the system’s many safeti es is a Time Guard function to prevent rapid cycling of the compressor. A protective five-minute time delay restricts compressor restarts after shutoff.

POWER FAILURE MODE - Power interruptions are no problem. User selections and system parameters are stored in non-volatile memory. These parameters are retained during a power failure. When power is returned, the system will automatically return to the last operating mode.

INTELLIGENT PRE-HEATING - The system guards against the an noying COLD BLOW in heating mode, and constantly monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed up to prevent blowing uncomfortable cool air into the room.

WIRELESS IR REMOTE CONTROLLER - The Gree multi-functional infrared hand held wireless controller is sleek, ergonomically designed, easy to use and has a large backlit LCD display.

MODE BUTTON - The units can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.

Note: AUTO MODE has fixed setpoints of 68° F heating and 78° F cooling, which are not changeable. The system will automatically select heating or cooling to maintain room temperature within this temperature band.

TIMER MODE – The unit can be programmed to turned ON or OFF after a specific amount time. The time period is adjustable between one half and 24 hours.

SWING LOUVER – The unit has adjustable swing louvers which can be controlled from the wired tether or wireless controllers. Vertical swing louver allows five different vertical (up & down) air discharge directions including Continuous Sweep. Maximize comfort by adjusting the direction of airflow in the room by moving the louvers up or down.

PRIVACY LOCK MODE – Both wired tether and wireless controllers have a Privacy Lock to avert unauthorized access and stop tampering wit h system settings.

SLEEP MODE –The unit will automatically adjust room temperature during sleep time. This slight change in temperature will not affect your comfort level due to the natural effects that sleeping has on the body, but it will save on energy consumption and will lower electric bills.

4

FEATURES AND BENEFITS (Cont.)

FAHRENHEIT ° F / CELSIUS ° C - The wired tether and wireless controllers can be set to display in either °F or °C.

POLYMERIC AIR FILTERS –Two-piece removable polymeric air filters easi ly slide in and out from the front of the indoor unit and are interchangeable. The front panel does not need to be removed to access or change the filters. The filters are washabl e and permanent.

SELF-DIAGNOSIS –With an on-board computer using real-time diagnostics, the Gree system helps to prolong its own life. The automatic diagnosis feature continuously scans for unacceptable o perating conditions or malfunctions. If such conditions occur, the system takes corrective action or stops. Fault codes are shown on the unit display to facilitate easy troubleshooting and repair.

AGENCY LISTINGS - All systems are listed with AHRI (Air conditioning, Heating, and Refrigeration Institute) and are ETL Certified per UL Standards.

5/7 YEAR LIMITED WARRANTY - Enjoy one of the most comprehensive war ranties in the industry. Seven (7) years on compressor and Five (5) years on all parts.

5

NOMENCLATURE

MODEL NUMBER

BRAND

AHRI CERTIFICATION

RIO09HP115V1A

GREE

7077793

GREE

7084752

GREE

7077585

GREE

7077586

GREE

7077587

GREE

7077588

AHRI CERTIFICATION

RIO12HP115V1A RIO09HP230V1A RIO12HP230V1A RIO18HP230V1A RIO24HP230V1A

6

SYSTEM FEATURES

Nominal Cooling Capacity (Btu/H

208/230

V

Heat

Pump

Heat

Pump

Heat

Pump

Heat

Pump

Heat

Pump

Heat

Pump

SYSTEM FEATURES

Auxiliary Electrical Heater

Basepan With Electric Heater

NO

Compressor With Electric Heater

Corrosion Protection

Blue Fin

Inverter Type

G10

Intelligent Defrosting

YES

Intelligent Preheating

YES

LED Display Indoor Unit

Low Ambient Cooling

NO

YES

Low Ambient Heating

YES

NO

Low Voltage Startup

YES

Memory/Power Failure Recovery

Multi Fan Speeds

4 Speeds

Self-Diagnosis

YES

PhotoCatalytic Filter

NO

Ventilation (Outdoor Air)

Ambient Cooling Operating Range

64～113 F

5～109 F

Ambient Heating Operating Range

5ºF～75ºF

19～75 F

RIO09HP115V1A

Model

9,000 12,000 9,000 12,000 18,000 24,000

Operating Voltage 115V 115V 208/230V 208/230V 208/230V

System Type

NO NO NO NO NO NO

NO NO

NO NO YES YES NO NO

RIO12HP115V1A

RIO09HP230V1A

RIO12HP230V1A

RIO18HP230V1A

RIO24HP230V1A

YES YES YES YES YES YES

NO NO NO NO NO NO

7

USER CONTROL FUNCTIONS

Nominal Cooling Capacity (Btu/H

9,000

12,000

9,000

12,000

18,000

24,000

Operating Voltage

115V

208/230V

REMOTE CONTROLLER FUNCTIONS

Auto Mode

YES

Auto Fan

NO

Auto Swing (Horizontal Auto Swing)

NO

Auto Swing (Vertical Auto Swing)

YES

Clock on Remote Controller

NO

Dry Mode

YES

Dry Anti-Mildew (X-Fan) Mode

YES

Energy Saving Mode

NO

Dirty Filter Alert

NO

I Feel Function

NO

Wired Controller Interface

NO

Lock on Remote Controller

YES

Room Temperature Display

YES

Sleep Mode

YES

Multi Sleep Modes Options

NO

Timer Mode

YES

Turbo Mode

YES

Model

RIO09HP115V1A

RIO12HP115V1A

RIO09HP230V1A

RIO12HP230V1A

RIO18HP230V1A

RIO24HP230V1A

8

SYSTEM PERFORMANCE

Outdoor

Operating Range

Rated

(BtuH)

Range

(BtuH)

RIO09HP115V1A

16

12.0

9,000

(3,500-11,000)

64 °F

113 °F

RIO12HP115V1A

16

9.4

11,800

(3,300-12,500)

64 °F

113 °F

RIO09HP230V1A

16

10.2

9,000

(3,800-11,500)

5 °F

109 °F

RIO12HP230V1A

16

9.8

12,000

(3,300-12,500)

5 °F

109 °F

RIO18HP230V1A

16

11.1

18,000

(4,500-21,000)

5 °F

109 °F

RIO24HP230V1A

16

10.0

22,000

(6,400-24,000)

5 °F

109 °F

Outdoor Temperature

Operating Range

RIO09HP115V1A

8.6

3.5

9,800

(2,500-11,000)

5 °F

75 °F

RIO12HP115V1A

8.6

2.9

13,000

(3,400-13,500)

5 °F

75 °F

RIO09HP230V1A

8.5

3.4

9,000

(3,300-11,500)

5 °F

75 °F

RIO12HP230V1A

8.5

3.4

12,000

(3,400-12,500)

5 °F

75 °F

RIO18HP230V1A

2.8

19,200

(4,000-23,000)

5 °F

75 °F

RIO24HP230V1A

3.0

24,200

(4,100-26,600)

19 °F

75 °F

Model Numbers SEER EER

Model Numbers HSPF COP

Cooling Capacity

Heating Capacity

Rated

(BtuH)

Range (BtuH) Min Max

Dehumid-

ification

./Hr.)

(Pts

1.7

2.9

1.7

2.9

3.8

4.2

Temperature

Min Max

8.0

8.5

NOTES:

1. Ratings are based on: Cooling Standard: 80 F (26.7 C) db, 67 F (19.4 C) wb air entering indoor unit and 95 F (35 C) db air entering outdoor unit. Heating Standard: 70 F (21.1 C) db air entering indoor unit and 47 F (8.3 C) db, 43 F (6.1 C) wb air entering outdoor u ni t.

2. Ratings are based on 25 ft. (7.62 m) of interconnecting refrigerant lines.

3. All system ratings are based on fan coil units operating at high fan speed. Consult Physical Data tables for air flows at selected fan speeds.

Legend

EER - Energy Efficiency Ratio HSPF - Heating Seasonal Performance Ratio SEER - Seasonal Energy Efficiency Ratio COP - Coefficient of Performance

9

AIR FLOW PERFORMANCE

Indoor Unit

Cooling (CFM)

Fan

RIO09HP115V1AH

188

223

276

329

188

223

276

329

RIO12HP115V1AH

200

235

288

341

200

235

288

341

RIO09HP230V1AH

141

194

282

330

141

194

282

330

RIO12HP230V1AH

153

206

294

341

153

206

294

341

RIO18HP230V1AH

271

330

400

471

271

330

400

471

RIO24HP230V1AH

206

306

441

589

206

306

441

589

Outdoor Unit

RIO09HP115V1AO

1057

RIO12HP115V1AO

1057

RIO09HP230V1AO

942

RIO12HP230V1AO

942

RIO18HP230V1AO

1882

RIO24HP230V1AO

1883

Approximate Air Throw (ft.)

Low

Medium

High

Turbo

RIO09HP115V1AH

NA

26

33

RIO12HP115V1AH

NA

26

33

RIO09HP230V1AH

NA

26

33

RIO12HP230V1AH

NA

26

33

RIO18HP230V1AH

NA

21

24

RIO24HP230V1AH

NA

21

31

Model Numbers

Model Numbers Air Flow (CFM)

Low

Medium

High

Turbo

Low

Fan

Heating (CFM)

Medium

Fan

High

Fan

Turbo

Fan

Indoor Air Throw

Model Numbers

10

REFRIGERATION& PIPING SPECIFICATIONS

REFRIGERANT CHARGE

Model Number

Type

Charge (oz.)

Max Total Pipe

Refrigerant (ft.)

Additional

(oz./ft.)

RIO09HP115V1AO

R-410A

37.5

25

0.2

RIO12HP115V1AO

R-410A

41.1

25

0.2

RIO09HP230V1AO

R-410A

26.1

25

0.2

RIO12HP230V1AO

R-410A

35.3

25

0.2

RIO18HP230V1AO

R-410A

45.9

25

0.2

RIO24HP230V1AO

R-410A

54.7

25

0.2

REFRIGERANT PIPING LENGTHS

Model Number

for System (ft.)

System (ft.)

Outdoor & Indoor Units (ft.)

RIO09HP115V1AO

10

66

33

RIO12HP115V1AO

10

66

33

RIO09HP230V1AO

10

50

33

RIO12HP230V1AO

10

50

33

RIO18HP230V1AO

10

82

33

RIO24HP230V1AO

10

82

33

Refrigerant

Factory System

Length Without Adding

Charge Level

Min. Pipe Length

Max Pipe Length for

Max Elevation between

11

SOUND DATA

Indoor High Wall Units

Low Fan

Medium Fan

High Fan

Turbo Fan

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

Sound

(dBA)

RIO09HP115V1AH

42

32

45

35

47

37

50

40

RIO12HP115V1AH

42

32

45

35

47

37

50

40

RIO09HP230V1AH

36

26

42

32

48

38

53

43

RIO12HP230V1AH

38

28

43

33

49

39

54

44

RIO18HP230V1AH

44

34

48

38

53

43

58

48

RIO24HP230V1AH

44

34

49

39

53

43

59

49

Outdoor Unit

Sound Power

(dBA)

Sound Pressure

(dBA)

RIO09HP115V1AO

63

53

RIO12HP115V1AO

65

55

RIO09HP230V1AO

59

49

RIO12HP230V1AO

62

52

RIO18HP230V1AO

66

56

RIO24HP230V1AO

63

53

Model Numbers

Note:

1. Sound pressure ratings are estimated sound pressure measurements, 3 feet from unit.

2. Sound power ratings are per AHRI 270 and AHRI 350

Power

Pressure

Power

Pressure

Power

Pressure

Power

Pressure

12

ELECTRICAL DATA

Rated Power Supply

Cooling

Heating

RIO09HP115V1AO

115v-1ph-60hz

104-127

750

830

RIO12HP115V1AO

115v-1ph-60hz

104-127

1260

1320

RIO09HP230V1AO

208/230v-1ph-60hz

187-253

880

770

RIO12HP230V1AO

208/230v-1ph-60hz

187-253

1620

1050

RIO18HP230V1AO

208/230v-1ph-60hz

187-253

1620

2400

RIO24HP230V1AO

208/230v-1ph-60hz

187-253

2200

2800

Cooling

Heating

RIO09HP115V1AO

9.0

9.5

13

20

RIO12HP115V1AO

15.0

15.5

15

25

RIO09HP230V1AO

3.9

3.4

10

15

RIO12HP230V1AO

5.4

4.7

10

15

RIO18HP230V1AO

7.9

11.8

15

25

RIO24HP230V1AO

11.5

13.0

25

Compressor

Outdoor Fan

Indoor Fan

Input Power

RLA

Input Power

RIO09HP115V1AO

9.8

25.0

0.2

30

0.4

10

RIO12HP115V1AO

11.2

25.0

0.3

30

0.4

10

RIO09HP230V1AO

7.3

16.5

0.3

21

0.2

15

RIO12HP230V1AO

7.3

16.5

0.3

21

0.2

15

RIO18HP230V1AO

10.9

27.0

0.6

60

0.3

20

RIO24HP230V1AO

12.4

41.0

0.6

60

0.4

35

Outdoor Unit

Model Numbers

Outdoor Unit

Model Numbers

(volt-phase-hz)

Rated Input Current (amps)

Voltage Range

(volts)

Rated Input Power (watts)

Min. Circuit

Amp. (MCA)

Max Fuse

Size (Amps)

17

odel Numbers

M

RLA

(amps)

LRA

(amps)

RLA

(amps)

(Watts)

(amps)

Legend:

RLA – Rated Load AmpsFLA – Full Load AmpsLRA – Locked Rotor AmpsMCA – Min. Circuit Amps

(Watts)

13

INDOOR UNIT MAJOR COMPONETS

RIO09HP115V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO12HP115V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO09HP230V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO12HP230V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO18HP230V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO24HP230V1AH

Polymeric Mesh

AC Sync

Cross flow

RIO09HP115VA1O

Rotary

EXV

G10

RIO12HP115VA1O

Rotary

EXV

G10

RIO09HP230VA1O

Rotary

EXV

G10

RIO12HP230VA1O

Rotary

EXV

G10

RIO18HP230VA1O

Rotary

EXV

G10

RIO24HP230VA1O

Rotary

EXV

G10

Outdoor Unit

Indoor Unit

(lbs.)

RIO09HP115V1A

75

84

19

26

RIO12HP115V1A

75

84

19

26

RIO09HP230V1A

64

73

19

25

RIO12HP230V1A

68

77

20

27

RIO18HP230V1A

106

117

27

35

RIO24HP230V1A

115

126

33

44

Model Numbers Air Filter Fan Motor Fan Type

OUTDOOR UNIT MAJOR COMPONETS

Model Numbers Compressor

PRODUCT WEIGHT

Model Numbers

Net Operating

Metering

Device

Gross Shipping

Inverter

Net Operating

Gross Shipping

14

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Model No: RIO09HP115V1A 9,000 BtuH 115V

15

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Model No: RIO12HP115V1A 12,000 BtuH 115V

16

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Model No: RIO09HP230V1A 9,000 BtuH 230V

17

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

3/8-in OD Flared

Model No: RIO12HP230V1A 12,000 BtuH 230V

18

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

1/2-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

1/2-in OD Flared

Model No: RIO18HP230V1A 18,000 BtuH 230V

19

DIMENSIONAL SPECIFICATIONS

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

1/2-in OD Flared

Drain Connector

5/8-in OD

Liquid Line Valve

1/4-in OD Flared

Gas Line Valve

1/2-in OD Flared

Model No: RIO24HP230V1A 24,000 BtuH 230V

20

CLEARANCE SPECIFICATIONS

Unit

A

20 in

508 mm

B

20in

508 mm

C

78 in

1,981 mm

D

12 in

305 mm

E

12in

305 mm

Indoor Minimum Clearance*

Inch (mm)

Outdoor Unit Minimum Clearance*

Outdoor

Minimum Distance

*All Models

21

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45 F

NA

65F

9,569

7,434

10,520

7,985

11,165

8,152

95F

8,370

6,688

9,000

7,191

9,846

7,394

115F

7,458

6,166

7,911

6,423

8,450

6,629

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

8,926

8,239

8,231

25F

9,439

9,631

9,559

45F

12,357

12,243

12,943

12,386

Model No: RIO09HP115V1A 9,000 BtuH 115V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25 F NA NA NA NA NA NA 35 F NA NA NA NA NA NA

55 F NA NA NA NA NA NA

75F 9,179 7,176 9,910 7,614 10,642 7,859 85F 8,810 7,013 9,445 7,289 10,266 7,666

105F 7,912 6,436 8,532 6,809 9,274 7,115

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 8,239 8,239 7,881 7,881 7,629 7,629

35F 10,911 10,911 11,392 11,392 10,889 10,889

55F 13,368 13,368 13,116 13,116 12,596 12,596 65F 13,350 13,350 13,203 13,203 12,856 12,856

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

Capacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB

Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

22

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45F

NA

65F

12,754

9,920

14,043

10,641

14,890

10,887

95F

11,162

8,916

12,005

9,581

13,125

9,855

115F

9,957

8,204

10,556

8,563

11,289

8,822

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

11,598

10,968

10,619

25F

11,845

11,683

11,476

45F

14,195

13,989

13,546

Model No: RIO12HP115V1A 12,000 BtuH 115V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25F NA NA NA NA NA NA 35F NA NA NA NA NA NA

55F NA NA NA NA NA NA

75F 12,262 9,571 13,210 10,141 14,187 10,487 85F 11,764 9,347 12,602 9,737 13,650 10,259

105F 10,556 8,571 11,370 9,079 12,361 9,496

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 9,221 9,221 8,663 8,663 8,436 8,436

35F 12,876 12,876 12,642 12,642 12,535 12,535

55F 14,513 14,513 14,245 14,245 14,128 14,128 65F 14,459 14,459 14,375 14,375 14,274 14,274

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

Capacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB

Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

23

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45F

10,286

7,900

11,000

8,162

11,786

8,544

65F

9,565

7,432

10,525

7,988

11,160

8,158

95F

8,370

6,688

9,000

7,191

9,846

7,394

115F

7,469

6,155

7,919

6,415

8,459

6,624

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

7,947

7,250

7,206

25F

8,432

8,003

7,548

45F

9,368

9,050

8,502

Model No: RIO09HP230V1A 9,000 BtuH 230V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25F 11,073 8,222 11,968 8,665 12,794 9,211 35F 10,821 8,212 11,524 8,412 12,083 8,736

55F 9,903 7,665 10,560 7,920 11,320 8,264

75F 9,189 7,186 9,900 7,613 10,648 7,858 85F 8,820 7,003 9,450 7,295 10,260 7,664

105F 7,920 6,431 8,530 6,807 9,270 7,119

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 7,435 7,435 7,017 7,017 6,845 6,845

35F 8,903 8,903 8,240 8,240 7,894 7,894

55F 9,380 9,380 9,109 9,109 8,710 8,710 65F 9,336 9,336 9,199 9,199 8,916 8,916

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

Capacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB

Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

24

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45F

13,715

10,533

14,666

10,883

15,714

11,393

65F

12,754

9,910

14,033

10,651

14,880

10,877

95F

11,160

8,917

12,000

9,588

13,128

9,859

115F

9,959

8,206

10,559

8,553

11,279

8,832

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

10,590

9,661

9,603

25F

11,236

10,665

10,058

45F

12,483

12,060

11,329

Model No: RIO12HP230V1A 12,000 BtuH 230V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25F 14,764 10,962 15,958 11,553 17,058 12,282 35F 14,428 10,949 15,365 11,216 16,111 11,648

55F 13,204 10,219 14,080 10,560 15,094 11,018

75F 12,252 9,581 13,200 10,151 14,197 10,477 85F 11,760 9,337 12,600 9,727 13,680 10,219

105F 10,560 8,575 11,374 9,076 12,360 9,492

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 9,907 9,907 9,350 9,350 9,121 9,121

35F 11,864 11,864 10,981 10,981 10,520 10,520

55F 12,500 12,500 12,139 12,139 11,608 11,608 65F 12,441 12,441 12,259 12,259 11,881 11,881

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

Capacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB

Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

25

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45F

20,572

15,799

22,000

16,324

23,571

17,089

65F

19,130

14,864

21,049

15,977

22,320

16,316

95F

16,740

13,375

18,000

14,382

19,692

14,789

115F

14,939

12,309

15,839

12,829

16,919

13,248

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

17,079

15,581

15,488

25F

18,121

17,200

16,221

45F

20,133

19,450

18,272

Model No: RIO18HP230V1A 18,000 BtuH 230V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25F 22,145 16,443 23,936 17,330 25,587 18,422 35F 21,641 16,423 23,047 16,825 24,167 17,473

55F 19,805 15,329 21,119 15,839 22,640 16,528

75F 18,378 14,371 19,800 15,226 21,296 15,716 85F 17,640 14,006 18,900 14,591 20,520 15,329

105F 15,840 12,862 17,060 13,614 18,540 14,239

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 15,978 15,978 15,080 15,080 14,710 14,710

35F 19,133 19,133 17,709 17,709 16,966 16,966

55F 20,160 20,160 19,577 19,577 18,720 18,720 65F 20,064 20,064 19,771 19,771 19,162 19,162

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

Capacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB

Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

26

EXTENDED PERFORMANCE RATINGS

62 F

67 F

72 F

TC

SHC

TC

SHC

TC

SHC

45F

25,144

19,310

26,889

19,951

28,809

20,886

65F

23,381

18,167

25,727

19,527

27,280

19,942

95F

20,460

16,347

22,000

17,578

24,068

18,075

115F

18,259

15,045

19,359

15,680

20,678

16,191

Indoor Entering Air Temperatures (DB)

TC

SHC

TC

SHC

TC

SHC

15F

21,383

19,508

19,390

25F

22,688

21,534

20,309

45F

25,206

24,351

22,876

Model No: RIO24HP230V1A 24,000 BtuH 230V

COOLING PERFORMANCE

Indoor Entering Air Temperatures (DB) 50% RH

Outdoor Ambient

Temperature (DB)

25F 27,066 20,097 29,255 21,181 31,273 22,516 35F 26,450 20,073 28,169 20,564 29,537 21,356

55F 24,206 18,736 25,812 19,359 27,671 20,201

75F 22,462 17,565 24,200 18,610 26,028 19,209 85F 21,560 17,119 23,100 17,833 25,080 18,735

105F 19,360 15,720 20,851 16,640 22,660 17,403

HEATING PERFORMANCE

Outdoor Ambient

Temperature (DB)

(80% RH)

5F 20,004 20,004 18,880 18,880 18,417 18,417

35F 23,954 23,954 22,172 22,172 21,242 21,242

55F 25,240 25,240 24,510 24,510 23,437 23,437 65F 25,120 25,120 24,753 24,753 23,990 23,990

TC- Total Capacity (BtuH) SHC- Sensible Capacity (BtuH)

C

apacity data is based on the following conditions:

Cooling Nominal Test Conditions Heating Normal Test Conditions

Indoor: 80°F DB/67°F WB Indoor: 70°F DB/60°F WB Outdoor: 95°F DB/75°F WB Outdoor: 47°F DB/43°F W

65 F 70 F 75 F

27

ELECTRICAL WIRING

The main power is supplied to the outdoor unit. System must be on a single dedicated circuit. Use appropriate wire size and circuit breaker (or fuse) size for proper system overcurrent protection. Follow all local building codes and NEC (National Electrical Code) regulations.

Interconnecting Cable Wiring Diagram

The indoor unit is powered by the outdoor unit. The interconnecting cable between the outdoor and indoor unit must be a 14/4 AWG stranded copper conductors THHN 600V unshielded wire. The interconnecting cable should not be buried underground and must be recognized by UL or ETL and CSA certified.

Note: Use shield cable if installation is in close proximity of RF and EMI transmitting devices.

28

Local codes may require a disconnect switch within sight of the indoor unit. For these installations, use a DFS Disconnect Switch Accessory Kit (Part No: DFS-SWITCH-A) to break wires going to the N(1), 2, 3 terminals on the indoor unit, as shown in the wiring diagram below:

CONDENSATE REMOVAL

Install condensate drain to safely and effectiv el y route condensate water to a safe location. Use a flexible condensate drain hose to fit over the factory 5/8-inch (16mm) drainage port. The high wall indoor units have an internal condensate trap. Adding an ext ernal trap is not required.

All condensate drains must meet local codes and reg ulations. If adequate gravity drainage cannot be provided, a field-installed condensate pump m ust be used. Refer to manufacturer’s installation instructions, specifications and operating details supplied with condensate pump.

Typical Condensate Pump Wiring Diagram

29

LIMITED WARRANTY STATEMENT

Effective on new GREE Ductless purchases on or after March 1, 2013

Ductless Heat Pump Mini-Split Systems

RIO09HP115V1A RIO12HP115V1A RIO09HP230V1A RIO12HP230V1A RIO18HP230V1A RIO24HP230V1A

GREE distributor (hereinafter “Company”) warrants this product against failure due to defect in materials or workmanship under normal use and maintenance as follows. All warranty periods begin on the date of original installation. If the date cannot be verified, the warranty period begins one hundred twenty (120) days from date of manufacture. If a part fails due to defect during the applicable warranty period Company will provide a new or remanufactu r ed part, at Company’s option, to replace the failed defective part at no charge for the part. This limited warranty is subject to all provisions, conditions, limitations and exclusions listed below.

• A warranty period of Seven (7) years on compressor to the original registered end-user.

• A warranty period of Five (5) years on all parts to the original registered end u ser .

• A warranty period of One (1) year on the remote control provided with the original unit.

• Limited warranty applies only to systems that are properly installed by a state certified or licensed

HVAC contractor, under applicable local and state law in accordance with all applicable building codes and permits; GREE installation and operation instructions and good trade practices.

• Warranty applies only to products remaining in their original installation location.

• Defective parts must be returned to the distributor through a registered servicing dealer for credit.

30

LIMITATIONS OF WARRANTIES: ALL IMPLIED WARRANTIES AND/OR CONDITIONS

(INCLUDING IMPLIED WARRANTIES OR CONDITIONS OF MERCHANT AB ILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE) ARE L IM IT ED TO THE DURATION OF THIS LIMITED WARRANTY, SOME STATES OR PROVINCES DO NOT AL LOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. THE EXPRESS WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DIS TR IB UTOR, DEALER, OR OTHER PERSON , WH ATSOEVER.

THIS WARRANTY DOES NOT COVER

:

1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing or handling of either defective parts, or replacement parts, or new units.

2. Product cleaning required prior to warranty service and repair.

3. Normal maintenance as outlined in the installation and servicing instructions or Owner’s Manual, including filter cleaning and/or replacement and lubrication.

4. Failure, damage or repairs due to faulty installation, misapplication, abuse, improper servicing, unauthorized alteration or improper operation.

5. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages due to the inadequacy or interruption of electrical ser vice.

6. Failure or damage due to floods, winds, fires, lightning, accidents, corrosive environments (rust, etc.) or other conditions beyond the control of the Company.

7. Failure or damage of coils or piping due to corrosion on installations within one (1) miles of sea coast or corrosive body.

8. Parts not supplied or designated by Company, or damages resulting from their use.

9. Products installed outside continental USA and Canada.

10. Electricity or fuel costs, or increases in electricity or fuel co sts from any reason whatsoever, including additional or unusual use of supplemental electric heat.

11. Any cost to replace, r ef ill or dispose of refrigerant, including the cost of refrigerant.

12. Shipping damage or damage as a result of transporting the unit.

13. Accessories such as condensate pumps, line sets and so fort h are not covered.

14. Any special, indirect or consequential property or commercial damage of any nature whatsoever. Some states or provinces do not allow the exclusion of incidental or consequential damages, so the above limitation may not apply to you.

FOR WARRANTY SERVICE OR REPAIR:

Contact your installing contractor. You may find the installer’s name on the equipment or in your Owner’s packet.

Complete product registration below and send back by e-mail at service@twclimate.com

This warranty gives you specific legal rights, and you may also have other rights which vary from state t o state or province to province.

WSO021513-DLSWARR-HP – Rev. 3-8-13

31

Specifications in this booklet are subject to change without notice. Manufacturer reserves the right to discontinue or modify specifications or designs without notice or without incurring obligations. All rights reserved.

Cat No. RIO-2TPG

Version: V2.0

32

Gree RIO09HP115V1A, RIO12HP115V1A, RIO12HP230V1A, RIO09HP230V1A, RIO18HP230V1A Technical Product Manual

Specifications and Main Features

Frequently Asked Questions

User Manual