Gree RIO12HP115V1A Specifications

HIGH-WALL DUCTLESS AIR CONDITIONING & HEATING SYSTEM

OWNER'S MANUAL

Models:

RIO09HP115V1A RIO12HP115V1A RIO09HP230V1 RIO12HP230V1 RIO18HP230V1A RIO24HP230V1A

B B

Thank you for choosing a

rio

High-Wall Ductless

Air Conditioning & Heating System!

You can feel confident in your selection because the same pride in craftsmanship and engineering knowledge that goes into millions of other Gree installed products worldwide has gone into your unit.

Please read this owner’s manual carefully before operation and retain it for future reference.

Contents

• Safety Precautions 2

• Part Names 4

• Operation of Wireless Remote Controller 5

• System Functions 16

• Cleaning and Caring for Your Unit 17

• Troubleshooting 19

• System Operations/Energy Saving Tips 21

• Warranty Back

1 2

SAFETY PRECAUTIONS

Please read the following before operation.

Recognize safety information. This is the safety-alert symbol. When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words: DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol.

DANGER identifies the most serious hazards which will result in severe personal injury or death.

WARNING signifies hazards which could result in personal injury or death.

CAUTION is used to identify unsafe practices which may result in minor personal

injury or product and property damage.

NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.

NOTE: Your actual air conditioning & heating system and related devices may differ from the images shown in this manual.

This appliance is not intended for use by children without responsible adult supervision.

Proper care should be taken to ensure safety.

WARNING

Heat pumps, air conditioners & heating equipment should be installed, started up, and serviced only by qualified installers and service technicians. Air conditioning, heat pumps and refrigeration systems are hazardous due to high voltage electrical components, high refrigerant pressures, and moving parts.

SAFETY PRECAUTIONS

Please read the following before operation.

WARNING

• Disconnect electrical power to the or cleaning.

• Do not attempt to repair the

electric shock or fire. Contact a qualified service technician for all service requirements.

• Do not splice the power cord or use an extension cord. Overheating can occur,

causing a fire hazard.

• Keep combustible materials away from the unit.

rio

system before performing any maintenance

rio

system yourself. Incorrect repairs may cause

CAUTION

• Do not put hands or any objects into the air inlets or outlets. This may cause personal injury or damage the unit.

• When cleaning, be careful not to splash water on the unit. Doing this may cause electric shock or damage to unit.

Icons Displayed

: COOL

: DRY

Front Panel Display

The front panel on the display.

NOTE: The indoor unit display panel can be turned ON or OFF via the LIGHT button on the remote controller. See "LIGHT" button description for more detail.

rio

indoor unit contains system status lights and an easy-to-read LED

: HEAT

: POWER

: SET TEMP

PART NAMES

Indoor unit

Part Name

1. Remote Controller

2. Front Panel

3. Air Filter

4. Horizontal Louver

5. Wall Hole Sleeve

6. Insulation

7. Refrigerant Pipes

8. Drain Hose

Outdoor unit

OPERATION OF WIRELESS REMOTE CONTROLLER

WARNING

CAUTION WARNING

REMOTE CONTROLLER OPERATIONS

The

rio

universal wireless remote controller is sleek, versatile and allows you to change room temperatures and functions on unit from the palm of your hand. The large LCD display and buttons make it easy-to-understand and easy-to-use.

The remote controller may be used for several of up to 25 ft. (7.6 m) as long as there are no obstructions. This is one-way communication only (from remote controller to indoor unit.)

The remote controller is set from factory to display temperatures in°F. If °C is desired, turn the remote OFF and then press “MODE“ and “

NOTE: Not every unit has each of the functions described below. If your unit does not come equipped with a certain function, the button will be inactive.

ON/OFF Button

•

Pressing this button will turn the unit on and off. Using the ON/OFF function will cancel TIMER and SLEEP functions, but preset times will not be affected.

MODE Button

• Pressing this button will present the AUTO, COOL, DRY, FAN and HEAT mode options which can then be selected. AUTO mode is the default mode. When the indoor unit

first powers on under this mode, the temperature will not be displayed.

FAN Button

• Pressing this button will present the AUTO, LOW, MEDIUM,

which can then be selected.

rio

units. It can operate the unit from a distance

–

” buttons on the remote simultaneously.

Icons Displayed

and HIGH speed options

• Low • Medium • High

: AUTO

: COOL

: DRY

FAN ONLY

: HEAT

NOTE: When the indoor unit first powers on, the AUTO fan speed is the default mode. In DRY MODE, the fan will automatically run at low speed.

CAUTION

• Do not drop or throw remote controller.

• Protect remote controller from water

• Keep remote controller away from direct sunlight or high heat.

5 6

OPERATION OF WIRELESS REMOTE CONTROLLER

Signal Transmitter

ON/OFF Button

FAN Button

MODE Button

OPERATION OF WIRELESS REMOTE CONTROLLER

REMOTE CONTROLLER FUNCTIONS

LIGHT Button

• Press the LIGHT button to turn On or Off the display on the indoor unit front panel. When the indoor unit first powers on, the front panel display will default to ON. The LIGHT icon will display when the front panel display is ON.

TURBO Button

• Press the TURBO button to reach the desired room temperature faster. After selecting the“HEAT”or“COOL” mode button, push the“TURBO” button. This will force the unit to run at ultra high speed. When TURBO mode is running, the TURBO icon is displayed on the remote controller.

X-FAN Button

• Press the X-FAN button to allow the indoor fan to run for 10 minutes after the unit is turned off (cooling or dry modes only) to ensure that additional moisture is removed from coil. X-FAN icon will be displayed on remote controller.

+ Button

• Press the + button to raise the room setpoint. Press once for slow adjustment and hold down for fast adjustment.

– Button

• Press the – button to lower the room setpoint. Press once for slow adjustment and hold down for fast adjustment.

7 8

+ 16 hidden pages