ETAC2 With Universal Heater - 7,000 to 15,000 Cooling & Heat Pump w/ Backup Electric Heating Models (Power Cord Required)
Job Name Location Date
ETAC2-07HP230VA-A 1.69
13.0
3.6/3.6 86% 312/282 8703491
ETAC2-09HP230VA-A 2.11
12.1
3.5/3.5 85% 329/294 8703492
ETAC2-12HP230VA-A 2.75
11.6
3.4/3.4 75% 341/306 8703493
ETAC2-15HP230VA-A 3.17
10.4
3.1/3.1 67% 341/306 8703494
ETAC2-07HP265VA-A 1.69
13.0
3.6 86% 312/282 8703495
ETAC2-09HP265VA-A 2.11
12.1
3.5 85% 329/294 8703496
ETAC2-12HP265VA-A 2.75
11.6
3.4 75% 341/306 8703497
ETAC2-15HP265VA-A 3.17
10.4
3.1 67% 341/306 8703498
Reverse (Based on Power Cord
5.0 KW Cycle 2.45 KW 3.45 KW 5.0 KW Selection)
ETAC2-07HP230VA-A 208/230 - 2.9/2.7 2.6/2.4 9.7/10.7 13.6/15.0 - 15, 20
ETAC2-09HP230VA-A 208/230 - 3.9/3.7 3.4/3.2 9.7/10.7 13.6/15.0 - 15, 20
ETAC2-12HP230VA-A 208/230 4,089/5,000 5.1/4.9 4.7/4.2 9.7/10.7 13.6/15.0 19.7/21.8 15, 20, 30
ETAC2-15HP230VA-A 208/230 4,089/5,000 6.7/6.2 6.7/6.2 9.7/10.7 13.6/15.0 19.7/21.8 15, 20, 30
ETAC2-07HP265VA-A 265 - 2.4 2.2 9.3 13.1 - 15, 20
ETAC2-09HP265VA-A 265 - 3.3 3.1 9.3 13.1 - 15, 20
ETAC2-12HP265VA-A 265 5,000 4.2 3.7 9.3 13.1 18.9 15, 20, 30
ETAC2-15HP265VA-A 265 5,000 5.4 5.0 9.3 13.1 18.9 15, 20, 30
Performance Specification
Universal Electric Heating
Universal Electric Heating
Universal Electric Heating
Purchaser Engineer Phone
Submitted To For Reference Approval New Construction Revovation Project
Unit Designation Schedule No.
GENERAL FEATURES
- Industry Standard Size 42" x 16" - Designed to easily install in most standard wall sleeve (Contractor must verify)
- Electronic Touch Pad - IR Remote Control (Optional)
- Wired, Wireless Wall Thermostat & Energy Management System Interface
- LCDI Power Cord (208/230V Only)
- Condensate Slinger Ring Disposal
- Separate Multi-Speed Indoor & Outdoor Fan Motors
- Dry Mode
- Industry's Longest Standard Warranty, 5 Year Limited Warranty (See Product Catalog For Details)
Model Number
208/230 Volt
265 Volt
Model Number Voltage
Cooling
Cooling
10,600
Dehumi dification
(Pints/Hr)
Cooling
Energy
Efficiency Ratio
(EER)
Sensible Indoor Fan AHRI
COP Heat CFM Certification
Factor (Hi/Low) Number
Universal Power Cord Selection Receptacle Configuration
Please refer to ETAC2 product catalog for complete line of accessories
Dimensional Specifications
Wired Wall Thermostats 2 Fan Speed (Non-Programmable)
Wireless Wall Thermostats 2 Fan Speed (Non-Programmable)
Internal & External Condesate Drain Kits
Polymer Architectural Louvered Grille - Alpine Beige (matches wall sleeve) [Additional Colors Available]
Aluminum Architectural Louvered Grille - Clear [Additional Colors Available]
Non-Electrical Subbase [Electrical Components Available]
Standard Wall Sleeve Polymer Insulated (42"W x 14-3/4"D x 16"H)
Standard Wall Sleeve Polymer Non-Insulated (42"W x 13-3/4"D x 16"H)
Standard Sleeve Metal Insulated (42"W x 13-3/4"D x 16"H)
GRILLE-ALU-STAMP
Breaker SizeVoltageModel Number NEMA Number
Electric Minimum Receptacles
Heater KW Circuit Ampacity Type
208/203 15 2.45 14 Tandem 6-15P
208/203 20 3.45 19 Perpendicular 6-20P
208/203 30 5.0 28 Large Tandem 6-30P
265 15 2.45 12 265V 15 Amp 7-15P
265 20 3.45 17 265V 20 Amp 7-20P
265 30 5.0 24 265V 30 Amp 7-30P
Stamped Aluminum Grille - Clear
208/230V
Tandem
208/230V 15 Amp
NEMA6-15R
Perpendicular
208/230V 20 Amp
NEMA6-20R
Large Tandem
208/230V 30 Amp
NEMA6-30R
265V
265V 15 Amp
NEMA7-15R
265V 20 Amp
NEMA7-20R
265V 30 Amp
NEMA7-30R
GREE_ETAC2_HP_SUBMITTAL_07-15MBH_08_01_17
Specifications are subject to change. Manufacturer reserves the right to discontinue or modify specification or design without notice or without incurring obligation. All rights reserved.