Page 1
ACCESSORY CATALOG
BROADEST LINE OF PTAC & ETAC ENHANCEMENT PRODUCTS
Page 2
WALL SLEEVES
Polymer Insulated Wall Sleeve
42” x 16” x 14”
Premium polymer wall sleeves are designed to withstand the toughest climate conditions with noncorrosive fiberglass-reinforced polyester compound and factory installed insulation for exceptional
strength, superior sound absorption, and minimal heat loss.
Steel Wall Sleeve
42” x 16” 14”
Heavy duty 18-gauge galvanized steel wall sleeve with a durable powder coat paint finish to provide
maximum corrosion protection. Each wall sleeve is insulated to create a solid thermal barrier and
increase noise reduction.
Polymer Non Insulated Wall Sleeve
42” x 16” x 14”
Durable polymer wall sleeve are built with fade-resistant color that blends well with most exteriors.
They offers outstanding strength, durability, color retention, water integrity and corrosion resistance.
POLYMER WALL SLEEVES
ORDERING NO. DESCRIPTION
SLEEVE-INSUL-1PK Insulated Polymer Wall Sleeve 21 42 14 3/4 16
PTAC-SLEEVE-SE-INS Steel Wall Sleeve 30 42 14 3/4 16
WALL-SLEEVE-1PK * Non-Insulated Polymer Wall Sleeve 20 42 14 3/4 16
* * Insulated Wall Sleeves should be considered for superior sound, absorption to reduce heat loss, and to prevent sleeve sweating, a condition that
can occur when the outdoor temperature is cold and the indoor temperature is warm and humid.
APPROX
SHIP WT
DIMENSIONS (in.)
W D H
Metal Extended Depth Wall Sleeve
Heavy duty metal extended depth wall sleeves are available in a variety of sizes for most deep wall
applications and difficult installations. All extended wall sleeves are 42-in wide and 16-in high. Choose
from 18-in, 24-in, 26-in and 28-in depth sizes. All extended wall sleeves come with factory installation
insulations to to minimize heat loss and reduce outdoor noise transmission.
STEEL WALL SLEEVES
ORDERING NO. DESCRIPTION
SLEEVE-EXT18-1PK
SLEEVE-EXT24-1PK
SLEEVE-EXT26-1PK
SLEEVE-EXT28-1PK
Extended Wall Sleeve For Deep Wall Applications
Extended Wall Sleeve For Deep Wall Applications
Extended Wall Sleeve For Deep Wall Applications
Extended Wall Sleeve For Deep Wall Applications
(18 in . Depth)
(24. in . Depth)
(26 in . Depth)
(28 in . Depth)
APPROX
SHIP WT
39 42 18 16
56 42 24 16
60 42 26 16
62 42 28 16
DIMENSIONS (in.)
W D H
www.greecomfort.com
|
2
Page 3
WALL SLEEVE ACCESSORIES
Universal Drain Kit
Condensate drain kit can be used to control condensate water from the packaged terminal unit. The
kits can be used for exterior or interior drain systems. The drain kit includes both a shor t right angle
tube and a 6” long straight drain tube to suit any application.
Friedrich Wall Sleeve Adapter
The Friedrich (and ZoneAire) wall sleeve adapter is constructed of metal and is designed to
increase the depth of an existing Friedrich T-series or ZoneAire wall sleeve to accommodate
industry standard PTAC units.
For a superior look and to hide any construction imperfections, use wall sleeve molding kit to
trim the wall sleeve to the wall. The molding kit is a perfect solution and can be used with any
This easy to field install insulation kit for 42” x 16” x 14” wall sleeves provides sound absorption,
WALL SLEEVES ACCESSORIES
ORDERING NO. DESCRIPTION
FR-SLEEVE-EXT
SLEEVE-MOLDING
DRAIN-KIT-1PK
INSULATION-KIT
Friedrich Wall Sleeve Extension, for Retrofit into Friedrich 11-1/2
in . deep Wall Sleeves (Friedrich T Series)
Wall Sleeve Molding Kit for Trimming 42 in x 16 in
Wall Sleeves to the Interior Wall .
Attaches to Wall Sleeve for Controlled Internal or
External Disposal of Condensate (1 pack)
Insulation Kit to Make a Standard Non-Insulated
Wall Sleeve Insulated
Wall Sleeve Molding Kit
42” x 16” wall sleeve (matches wall sleeve color).
Wall Sleeve Insulation Kit
reduces heat loss and prevents sleeve sweating.
APPROX
SHIP WT
10 42 3 16
2 42 N/A 16
1 NA NA NA
10 NA NA NA
DIMENSIONS (in.)
W D H
ACCESSORY CATALOG 2013
|
3
Page 4
GRILLES
Stamped Aluminum Exterior Rear Grille
42” x 16”
This cost--effective, one--piece standard grille is made from durable anodized aluminum. The grille
is lightweight, has a clear finish, and is easy to install from inside the room.
ORDERING NO. DESCRIPTION APPROX SHIP WT
GRILLE-ALU-STAMP Stamped Aluminum Exterior Grille, CLEAR FINISH 3
Polymer Architectural Rear Grille
42” x 16”
This value line of polymer architectural outdoor grilles will blend attractively with most building
exteriors. Mounted easily from inside the room, the one--piece, molded grille is designed for protection,
enhanced appearance, and superior weather-resistance. The grille is made of durable polymer and has
a colorfast, lightly textured finish that blends well with most exterior finishes.
ORDERING NO. DESCRIPTION APPROX SHIP WT
GRILLE-PLA-ALPIN Polymer Architectural Exterior Grille, ALPINE (Matches Wall Sleeve) 7
STAMPED ALUMINUM GRILLE
STAMPED ALUMINUM GRILLE
GRILLE-PLA-WHITE Polymer Architectural Exterior Grille, WHITE 7
GRILLE-PLA-BEIGE Polymer Architectural Exterior Grille, BEIGE 7
GRILLE-PLA-DBRNZ Polymer Architectural Exterior Grille, DARK BRONZE 7
Aluminum Architectural Rear Grille
42” x 16”
This premium line of decorative outdoor grilles will enhance the appearance of any building. The
grilles are made of strong, durable, extruded, anodized aluminum and are designed to be mounted
easily from inside the room. These elegant grilles, available in many standard colors, have baked
enamel finishes containing 50% Kynar® resin, for a superior finish that will withstand the most
extreme conditions.
STAMPED ALUMINUM GRILLE
ORDERING NO. DESCRIPTION APPROX SHIP WT
GRILLE-ALU-CLEAR Aluminum Architectural Exterior Grille, CLEAR FINISH 7
GRILLE-ALU-ALPIN Aluminum Architectural Exterior Grille, ALPINE (Matched Wall Sleeve) 7
GRILLE-ALU-WHITE Aluminum Architectural Exterior Grille, WHITE 7
GRILLE-ALU-BRONZ Aluminum Architectural Exterior Grille, BRONZE 7
GRILLE-ALU-MBRNZ Aluminum Architectural Exterior Grille, MED BRONZE 7
GRILLE-ALU-DBRNZ Aluminum Architectural Exterior Grille, DARK BRONZ 7
GRILLE-ALU-BEIGE Aluminum Architectural Exterior Grille, BEIGE 7
GRILLE-ALU-CUSTOM Custom colored grilles are available. 7
www.greecomfort.com
|
4
Page 5
Hurricane Grade Architectural Rear Grille
Extruded aluminum architectural grille that meets the Florida Building Code for hurricane wind
loads on buildings and structures including the Rigid Missile Hurricane Impact Test. These roughed
grilles are available with anodized aluminum finish and a baked-on paint finish for durability.
HURRICANE IMPACT ARCHITECTURAL GRILLES **
ORDERING NO. DESCRIPTION APPROX SHIP WT
GRILLE-HUR-CLEAR Aluminum Hurricane Grade Architectural Exterior Grille, CLEAR FINISH 7
GRILLE-HUR-ALPIN Aluminum Hurricane Grade Architectural Exterior Grille, ALPINE (Matches Wall Sleeve) 7
GRILLE-HUR-WHITE Aluminum Hurricane Grade Architectural Exterior Grille, WHITE 7
GRILLE-HUR-BEIGE Aluminum Hurricane Grade Architectural Exterior Grille, BEIGE 7
GRILLE-HUR-BRONZ Aluminum Hurricane Grade Architectural Exterior Grille, LIGHT BRONZE 7
GRILLE-HUR-MBRNZ Aluminum Hurricane Grade Architectural Exterior Grille, MEDIUM BRONZE 7
GRILLE-HUR-DBRNZ Aluminum Hurricane Grade Architectural Exterior Grille, DARK BRONZE 7
GRILLE-HUR-CUSTOM Aluminum Hurricane Grade Custom colored grilles are available. 7
**The Dade-Miami County/Florida Building Code requires exterior cladding components be designed to protect life and proper ty in
structures exposed to high velocity hurricane force winds.
ACCESSORY CATALOG 2013
|
5
Page 6
SUBBASES
Universal Subbase
The non-electrical subbase is made of heavy gauge steel to provide support for the wall
sleeve. The subbase is designed to mount directly to the wall sleeve and contains adjustable
legs from 3-1/4 in. to 5-1/2 in. (80 to 140 mm) for leveling, side filler panels and mounting
holes for an electrical modules. It will accepts circuit fuse, power disconnect switch and conduit
hardwire modules.
Leveling Legs
Leveling legs attach easily to the wall sleeve and offer accurate leveling and support for units
without a subbase. Leveling legs are adjustable from 3--1/4 to 5--1/2 inches (80 to 140 mm).
ORDERING NO. DESCRIPTION APPROX SHIP WT
PTAC-SUBBASE-A
LEVELING-LEGS Leveling legs for wall sleeve support and leveling when a subbase is not used 3
NON-ELECTRICAL SUBBASE
Universal Subbase with adjustable legs, side filler panels and mounting holes for electrical
subbase modules
7
Electrical Standard Subbase
Upgrade universal subbase to a fully electrical subbase by add an Electrical Subbase module. The
electrical subbase modules have an electrical junction box, receptacle outlet, and cover plate.
SUBBASE FIELD-INSTALLABLE MODULE
ORDERING NO. DESCRIPTION
PTAC-REC-230V15-A Field Installed Subbase Receptacle 208/230V, 15 amp 2
PTAC-REC-230V20-A Field Installed Subbase Receptacle 208/230V, 20 amp 2
PTAC-REC-230V30-A Field Installed Subbase Receptacle 208/230V, 30 amp 2
PTAC-REC-265V15-A Field Installed Subbase Receptacle 265V, 15 amp 3
PTAC-REC-265V20-A Field Installed Subbase Receptacle 265V, 20 amp 3
PTAC-REC-265V30-A Field Installed Subbase Receptacle 265V, 30 amp 3
Subbase Disconnect Switch
The subbase power disconnect switch modules provides an electrical disconnect for a PTAC unit
when required by local codes. The module contains a 230v/277v DPDT switch, electrical junction
box, and cover plate.
APPROX SHIP WT
SUBBASE POWER DISCONNECT SWITCH MODULE
ORDERING NO. DESCRIPTION APPROX SHIP WT
PTAC-SWITCH-A Field installable power disconnect switch for Universal Subbase 3
www.greecomfort.com
|
6
Page 7
Subbase Fuse Kit
The Subbase Fuse Module provides in-line over-current protection at the unit when required by NEC
(National Electric Code) or local codes. The module contains a cartridge-style fuse, electrical junction
box, and cover plate.
SUBBASE FUSES MODULE
ORDERING NO. DESCRIPTION APPROX SHIP WT
PTAC-FUSE-15A 15 amp Fuse Module for Universal Subbase. 3
PTAC-FUSE-20A 20 amp Fuse Module for Universal Subbase. 3
PTAC-FUSE-30A 30 amp Fuse Module for Universal Subbase. 3
Subbase Hardwire Module
The Subbase Hardwire Module integrates the hardwire power connection required by NEC (National
(SUBBASE NOT INCLUDED)
Electrical Code) to the universal subbase. The module includes 18” steel conduit with wires, junction
box, cover plate and all unit connections.
SUBBASE HARDWIRE MODULE
ORDERING NO. DESCRIPTION APPROX SHIP WT
PTAC-HW-230V 208/230v Hardwire Subbase Module with steel conduit whip and all unit mount connections. 3
PTAC-HW-265V 265v Hardwire Subbase Module with steel conduit whip and all unit mount connections. 3
ACCESSORY CATALOG 2013
|
7
Page 8
ELECTRICAL WIRING
Hardwire Kit
This accessory hardwire kit provides a permanent connection to the unit. Electrical hard wiring is
required when NEC (National Electrical Code) or local codes restrict the use of power cord and plug
connections. The hardwire kit mounts on the front right side of the unit and comes with 36 inches of
flexible steel conduit and a Molex connector for easy connect / disconnect.
HARDWIRE CONDUIT KITS
ORDERING NO. DESCRIPTION APPROX SHIP WT
HARDWIRE-KIT-230V
HARDWIRE-KIT-265V
Premanent Power Connection to the unit ( including 36-in of flexible steel conduit. For 208/230v
Premanent Power Connection to the unit ( including 36-in of flexible steel conduit. For 265v ETAC
ETAC applications
applications.
2
2
Conduit Interface Kit
The conduit interface accessory kit provides the wire connection between the unit and an
existing hardwire conduit power connection. Kit contains a molex connector for easy disconnect
and mounting hardware for a reliable installation.
HARDWIRE CONDUIT KITS
ORDERING NO. DESCRIPTION APPROX SHIP WT
CONDUIT-INTF-230V
CONDUIT-INTF-265V
Conduit interface kit to connect an ETAC unit to existing hardwire conduit. power connection For
Conduit interface kit to connect an ETAC unit to existing hardwire conduit power connection. For
208/230v ETAC applications
265v ETAC applications
2
2
www.greecomfort.com
|
8
Page 9
THERMOSTATS
Wireless Thermostats
This low voltage wireless wall thermostat provides easy installation and superior performance. The
T631W fits the décor in any room and finally correct comfor t problems without cutting holes and fishing
wires through walls. The wireless technology ensures dependable and reliable communication between
the thermostat and receiver module around the clock. Includes both wireless wall thermostat and
receiver module and features:
• Two speed fan control (High and Low Speed)
• Universal 2H/1C Heat Pump of 1H/1C Conventional
• Power Loss Memory
WIRELESS WALL THERMOSTATS
ORDERING NO. DESCRIPTION APPROX SHIP WT
T631W-2
Wireless Thermostat and Base Module with backlighting, F/C,
single stage compatible with Heat Pump or Heat/Cools models
• Heating and Cooling Set-point Limit
• Large Temperature and Set-point Display
• Large Blue Backlight Screen
2
Non-Programmable Thermostat
This low-voltage, easy-to-use non--programmable thermostat provides maximum guest comfort.
• Large Display with Bright Blue Backlight
• Adjustable Temperature Set Point Limits
• Non-Volatile Memory Retains User Settings
• Easy Access Front Battery Door
• Compressor Short Cycle Protection
WIRED NON-PROGRAMMABLE WALL THERMOSTATS
ORDERING NO. DESCRIPTION APPROX SHIP WT
T701
PTAC Non-Programmable Heat/Cool Thermostat with backlighting,
°F/°C, 1-Stage Heat/1-Stage Cool
• Separate Heating and Cooling Set Points
• ESD Guard™ Electronic Circuitry
• Display Degree F or C Switch
• Mount to Horizontal Box
• Adjustable Temperature Differential
2
Digital Programmable Thermostat
This low-voltage, easy-to-use programmable thermostat provides great guest comfort
and maximum energy savings. This micro computer controlled, 7-day programmable
single stage (1 Heat, 1 Cool) wall thermostat fits all decors. Its large 4 sq. inch display
with blue backlight and glow in the dark light button make it easy to see in the daytime
and night time. Easy menu driven programming with intuitive wake, leave, return, sleep
programming icons.
The programmable model includes the non-programmable features plus the following:
• 5-2 Day Separate Weekday / Weekend Programming
• Adaptive Recovery Mode (ARM™)
• Separate Heating and Cooling Set Point Program Times
WIRED PROGRAMMABLE WALL THERMOSTATS
ORDERING NO. DESCRIPTION APPROX SHIP WT
TT-P-411
PTAC 7-day Programmable Heat/Cool Thermostat with backlighting,
°F/°C, 1-Stage Heat/1-Stage Cool (For Heat/Cool Models)
• Temporary Program Override
• Programmable Extended Hold Mode
• Meets California Title 24 Guidelines
2
ACCESSORY CATALOG 2013
|
9
Page 10
MISCELLANEOUS
Lateral Duct Kit
The lateral duct kit allows one unit to heat or cool two rooms. The kit provides substantial savings for
apartments, hotels, and offices by eliminating the need for separate units in every room. The amount
of air that is diverted to an adjoining room is selectable.
The kit contains the following:
• Plenum with Transition
• 48-in Extension Duct
• Molding to Trim the Wall Opening
ORDERING NO. DESCRIPTION APPROX SHIP WT
LATERAL-DUCT The lateral duct kit allows one unit to heat or cool two rooms. 36
• Wall register
• Wall Sleeve Mounting Brackets
• Adjustable Air Diverter
LATERAL DUCT KIT
PTAC Air Knight
The PTAC Air Knight air purification system is designed to help eliminate unhealthy indoor environments
by reducing odors, air pollutants, VOC’s (chemical odors), smoke, mold, bacteria and viruses. The
Air Knight is easy to install inside the unit air discharge stream. The indoor fan delivers air treatment
quietly and affectively into the room . The Air Knight is never lost or misplaced since it stays attached
to the units.
PTAC AIR KNIGHT
ORDERING NO. DESCRIPTION APPROX SHIP WT
TP-AKPTAC PTAC Air Knight air purification system 4
10
SECURITY DOOR LOCK
This Locking Security Door Kit prevents unauthorized access to the heating and cooling controls This
field-installed accessory includes a control door with lock assembly and two matching keys.
SECURITY DOOR LOCK
ORDERING NO. DESCRIPTION APPROX SHIP WT
PTAC-LOCK-A Gree ETAC Locking Door with keys to prevent unauthorized access to controls. 3
PTAC-LOCK-B Gree PTAC GA series Locking Door with keys to prevent unauthorized access to controls. 3
www.greecomfort.com
|
Page 11
MISCELLANEOUS
ORDERING NO. DESCRIPTION APPROX SHIP WT
ETAC-REMOTE-A
PTAC-DEFLECTOR-A
PTAC-SOUND-A Sound Muzzler helps to absorb sound energy and blocks offensive noise from the compressor. 2
E9000 Remote Control for the
E-TAC series only.
Discharge air deflector for
GA-series and E-TAC series PTACs.
2
2
PTAC-CORD-15A
PTAC-CORD-20A
PTAC-CORD-30A
ETAC-AIRFILTER-2PK Gree ETAC Replacement Air Filters ( 2 per pack) 2
GA-AIRFILTER-2PK Gree GA series PTAC Replacement Air Filters (2 per pack) 2
BAFFLE-KIT-1PK
SLEEVE-MAINT-KIT
Accessory Baffle Kit is required for applications where a factory wall sleeve is used without a factory
Wall Sleeve Maintenace Kit, includes 120-inch foam insulation to seal between wall sleeve and unit, four
Extra Long 265v 15 amp power cord.
Cord is 58 inches long
Extra Long 265v 20 amp power cord.
Cord is 58 inches long
Extra Long Replacement 265v 30 amp power cord.
replacement J-Clips and four mounting screws.
Cord is 58 inches long
exterior grille, to prevent air re-circulation.
2
2
2
2
1
ACCESSORY CATALOG 2013
|
11
Page 12
Manufacturer reserves the right to discontinue, or change at
any time, specications or designs without notice or without
incurring obligations. ©2014. All rights reserved. WAT140508-v1
www.greecomfort.com
Loading...