GReddy TF03-14G User Manual
GReddy Turbo Kit
SCION xB NCP31 (1NZ FE) TF035 HL 14GK
SCION xB NCP31 (1NZ FE) TF035 HL 14GK
Installation Manual
Please read the entire manual before installing this kit.
Application:
Make Model Chassis Year
SCION xB NCP31 02~05
• This
• GReddy Front mount intercooler kit
• Premium grade gasoline (91 octane or higher) is required with this Kit.
• Make sure that the vehicle is not equipped with any ECU upgrade chips.
• Use of GReddy Racing Spark Plugs ISO #7 or NGK plugs (colder than factory) is recommended with
• This installation should only be performed by a trained specialist who is very
• If installed by an untrained person, it may cause damage to the kit as well as
• GReddy Performance Products Inc. is not responsible for any damage to the
GReddy Turbo Kit
GReddy Turbo Kit
GReddy Turbo KitGReddy Turbo Kit
GReddy Front mount intercooler kit is recommended with this kit
GReddy Front mount intercooler kitGReddy Front mount intercooler kit
this kit.
familiar with the automobile’s mechanical, electrical and fuel management
system.
the vehicle.
vehicle’s electrical system caused by improper installation.
Is designed only for the vehicles specified above.
Important
1.
1. Parts List
Parts List
1.1.
Parts List Parts List
１．Turbocharger ＴＦ－０３５ＨＬ １４ＧＫ ６ｃｍ２ Ｐ３８０ １
２．Turbo Exhaust Manifold （Cast Iron） １
３．Down Pipe Adapter （Cast Iron-Steel ５０φ） １
４．Compression Pipe Ｃ－１
５． 〃 Ｃ－２
６．Suction Pipe （Aluminum ５０φ） １
７．Oil Pressure Hose SUS１２００㎜ １
８． 〃 Banjo Fitting male・female (Small) １set
９． 〃 Copper Washer １０φ （ｔ＝１．０） ２
１０． 〃 Union Fitting １/８ＰＴ－１/８ＰＴ １
１１． 〃 Union Fitting １/８ＰＴ－１/８ＰＦ １
１２． 〃 Three Way Fitting １
１３．Oil Return Flange tube １６φ （Turbo side） １
１４．Rubber Hose ８φ×８００㎜ １
１５． 〃 １６φ×４００㎜ １
１６．Silicone Hose ５０φ×７０㎜ ２
１７．Reducer Hose ５０φ－５４φ １
Ｃ－１ （Aluminum ５０φ） １
Ｃ－１Ｃ－１
Ｃ－２ （Aluminum ５０φ） １
Ｃ－２Ｃ－２
１８． 〃 ５０φ－６０φ １
１９．Hose elbow ５０φ １
２０．Hose band ８φ Tridon ＃４ ２
２１． 〃 １６φ Tridon ＃１０ ２
２２． 〃 ５０φ Tridon ＃３２ ８
２３． 〃 ６０φ Tridon ＃３６ ２
２４．Gasket Turbo in １
２５． 〃 Turbo out １
２６． 〃 Oil Return １
２７． 〃 Down pipe １
２８．Heat Shield №１ （Turbine） １
２９． 〃 №２ （Down pipe） １
３０． 〃 №３ （Body） １
３１．Thermo-cloth １００㎜×１０００㎜ ２
３２．Zip ties １５０㎜ １５
３３．Heat Shield bracket （Body） １
３４．ｅ－ｍａｎａｇｅ ＮＣＰ３１ （ＵＡ） １
３５． 〃 Harness １
３６．Oil pan Ａｓｓｙ （Oil Return tube） １
３７．Suction pipe bracket １
３８．Ｍ６×１５㎜ Ｐ１．０ Stainless B S/W － － （Oil Return） ２
３９．Ｍ６×１５㎜ Ｐ１．０ Stainless B S/W － N （Heat Shield №３、Suction pipe bracket） ２
４０．Ｍ６×１５㎜ Ｐ１．０ Stainless B S/W F/W － （Heat Shield №２） ２
４１．Ｍ８×１５㎜ Ｐ１．２５ Stainless B S/W F/W － (Heat Shield №１) ２
４２．Ｍ８×３８㎜ Ｐ１．２５ Stainless stud B S/W － N （Exhaust Manifold） ３
４３．Ｍ１０×３５㎜ Ｐ１．２５ Stainless B S/W － － （Turbine ＩＮ） １
４４．Ｍ１０×３５㎜ Ｐ１．２５ Stainless stud B S/W － N （Turbine ＩＮ、ＯＵＴ） ５
４５．Ｍ１０ Stainless － S/W － － (Turbine ＯＵＴ) １
４６．Ｍ１０×８０㎜ Ｐ１．２５ Stainless B － － － (Turbine ＯＵＴ) １
Part List
Part List
Part ListPart List
１ ２ ３ ４ ５
６ ７ ８ ９ １０，１１
１２ １３ １４，１５ １６ １７，１８
１９ ２０ ～ ２３ ２４ ２５
Loading...