GReddy INTERCOOLER KIT, SPEC-R HG 6x2 Installation Manual

INTERCOOL

INTERCOOLINTERCOOL

INTERCOOLER

ERER

ER KIT

KITKIT

KIT

NISSAN

NISSANNISSAN

NISSAN ＧＴ－Ｒ

ＧＴ－ＲＧＴ－Ｒ

ＧＴ－Ｒ ＲＲＲＲ３５

３５３５

３５

（ＶＲ

（ＶＲ（ＶＲ

（ＶＲ３８

３８３８

３８ＤＥＴＴ

ＤＥＴＴＤＥＴＴ

ＤＥＴＴ））））

ＳＰＥＣ－Ｒ

ＳＰＥＣ－ＲＳＰＥＣ－Ｒ

ＳＰＥＣ－Ｒ ＨＧ

ＨＧＨＧ

ＨＧ ＴＹＰＥ

ＴＹＰＥＴＹＰＥ

ＴＹＰＥ６６６６×

××

×２２２２

Please read the manual before installing this kit

Please read the manual before installing this kitPlease read the manual before installing this kit

Please read the manual before installing this kit

MODEL CHASSIS ENGINE YEAR

ＧＴ－Ｒ ＣＢＡ－Ｒ３５ ＶＲ３８ＤＥＴＴ 2007 - on

※

This GReddy Intercooler Kit

GReddy Intercooler KitGReddy Intercooler Kit

GReddy Intercooler Kit is designed for the original turbo.

※ This kit requires modification to the Intake Air duct.

GReddy Performance Products

GReddy Performance Products GReddy Performance Products

GReddy Performance Products Inc. is not responsible if

Inc. is not responsible if Inc. is not responsible if

Inc. is not responsible if NISSAN factory warranty is voided.

NISSAN factory warranty is voided.NISSAN factory warranty is voided.

NISSAN factory warranty is voided.

Installation Manual

Installation ManualInstallation Manual

Installation Manual

1.

1.1.

1. Parts

Parts Parts

Parts List

ListList

List

１．Intercooler (ＴＹＰＥ６） １ＳＥＴ

２．Air diversion plate １ＳＥＴ

３．Clip ４

４．Ｍ６×１２㎜ Ｐ＝１．０ HEX HEAD BOLT ２

５．Ｍ６×１５㎜ Ｐ＝１．０ HEX HEAD BOLT ４

６．Ｍ６ Ｐ＝１．０ LOCK NUT ６

７．Ｍ６ F/W (S) ４

８．Ｍ６ F/W (L) ２

９．Ｍ８×２５㎜ Ｐ＝１．２５ Stainless Ｂ Ｆ/Ｗ Ｓ/Ｗ １０

Parts List Picture

Parts List PictureParts List Picture

Parts List Picture

１ ２ ３

４．５ ６

７

８ ９

２２２２．．．．Stock Parts Removal

Stock Parts RemovalStock Parts Removal

Stock Parts Removal

２２２２－－－－１１１１ Remove front

Remove frontRemove front

Remove front bumper

bumper bumper

bumper

(1) Disconnect the negative terminal of the battery.

(2) Remove the front fender inner cover both sides.

(3) Remove the front side under carriage cover.

※ Remove plugs to see the bolts.

※ After removing all plugs and bolts, slide to the

front.

(4) Remove the radiator cover.

(5) Remove the screws from upper side bumper.

(6) Disconnect the turn signal connectors.

※Remove the 3 screws on each side. ( they are

inside of

the bumper.)