GReddy INTERCOOLERS Mitsubishi Evolution 2001-07 User Manual

GReddy Intercooler Kit
02-07 MITSUBISHI LANCER EVOLUTION Ⅷ,Ⅸ
Front mount Type 32
1
If installed by an untrained person, it may cause damage to the kit as well
GReddy Performance Products Inc. is not responsible for any damage to
GReddy Authorized dealer or GReddy Performance Products if
02-07 MITSUBISHI LANCER EVOLUTION Ⅷ,Ⅸ
Front mount Type 32
Installation ManualInstallation Manual
Please read the entire manual before installing this kit.
Please read the entire manual before installing this kit.
Please read the entire manual before installing this kit.Please read the entire manual before installing this kit.
Application:
Make
Make Model
Make Make
MITSUBISHI LANCER EVOLUTION Ⅷ,Ⅸ CT9A 2002-2007
This GReddy Intercooler Kit
BATTERY REPLACEMENT IS NECESSARY TO INSTALL.
BATTERY REPLACEMENT IS NECESSARY TO INSTALL. USE BATT SIZE 5
BATTERY REPLACEMENT IS NECESSARY TO INSTALL. BATTERY REPLACEMENT IS NECESSARY TO INSTALL.
Premium grade gasoline (91 octane or higher) is required with this Kit.
Model
Model Model
GReddy Intercooler Kit is designed for the GReddy
GReddy Intercooler KitGReddy Intercooler Kit
Chassis
GReddy TD06 &T67 TURBO
GReddy GReddy
Chassis Year
ChassisChassis
TD06 &T67 TURBO Kit
TD06 &T67 TURBO TD06 &T67 TURBO
USE BATT SIZE 51R OR SMALLER.
USE BATT SIZE 5USE BATT SIZE 5
Year
Year Year
Kit installed.
KitKit
1R OR SMALLER.
1R OR SMALLER.1R OR SMALLER.
1. This installation should only be performed by a trained specialist who is very familiar with the automobile’s mechanical, and electrical system.
2. as the vehicle.
3.
the vehicle’s electrical system caused by improper installation.
Call your
4.
there are any problems or questions regarding this product.
Important
2
1111....
Parts List
1.Intercooler (TYPE32) 1 2.Intercooler Pipe I-1(70φAluminum)
3. 〃 I-2(80φ
4. 〃 I-3(80φAluminum) 1 5. 〃 I-4(80φAluminum elbow INX01067)
6.Silicon Hose 80φ×80㎜ Straight
7. 〃 60φ-70φ Reducer 8. 〃 70φ-80φ Reducer
9.Hose Band 10φ Tridon #5 3 10. 〃 70φ Tridon #44 3 11. 〃 80φ Tridon #48 8 12.Steel Bracket 1 13.P/S Cooler 1 14.P/S Cooler bracket 1 15.P/S Cooler clamp 2 16.10φ Aluminum tube 1 17.Aluminum spacer t=20 2 18.Rubber hose9φ 2100㎜
Aluminum)
19.Zip Tie 150㎜ 5 20.6㎜×15㎜ P=1.0 Stainless B S/W F/W N 3 21.8㎜×15㎜ P=1.25 Stainless B S/W F/W 3 22.8㎜×20㎜ P=1.25 Stainless B S/W F/W N 1 23.8㎜×30㎜ P=1.25 Stainless B S/W F/W N
3
Loading...
+ 6 hidden pages