GReddy BRS-610 GDB User Manual

Important

ImportantImportant

Important

ＢＲＳ－６１０

ＢＲＳ－６１０ＧＤＢ

ＢＲＳ－６１０ＢＲＳ－６１０

ＧＤＢ

ＧＤＢＧＤＢ

Instruction Manual

Instruction ManualInstruction Manual

Please read the manual carefully before installing and using this

Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this

This product is for off road use only.

This product is for off road use only.This product is for off road use only.

MAKE MODEL CHASSIS ENGINE YEAR

ＳＵＢＡＲＵＩＭＰＲＥＺＡＷＲＸＧＤＢＥＪ２０／ＥＦ２５２００２ — ２００５

APPPLICATION

APPPLICATION ：：：：

APPPLICATIONAPPPLICATION

Recirculation Type

※ Parts necessary for recirculation are included.

This kit is designed for the vehicle specified above. Please do not attempt to install this kit on other application.

product.

product.product.

＊＊＊＊ＵＳＤＭ

－1－

Caution

CautionCaution

Caution

SAFETY INFORMATION

SAFETY INFORMATIONSAFETY INFORMATION

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

○ This Manual will explain the proper installation procedure of this product.

Please read this manual carefully. ○ This manual was created considering the vehicle to be completely factory spec. ○ While using this product, please keep this manual to use as a reference. ○ The notation shown below is used through out this manual.

This notation will indicate the important procedures and instructions to prevent accidents and injury.

Warning

WarningWarning

♦ If sub injectors are used make sure to mount he injectors after the blow off valve between the

blow off valve and the throttle body.

♦ On some applications, there are possibilities of engine stall if the air is released out to the

atmosphere. It is recommended to re-circulate the sir back in to intake system before the turbo in-let

Caution

CautionCaution

This notation will indicate the important procedures and instructions to prevent life treating accidents and injury.

DO NOT disassemble or mishandle this product. This will cause the product failure and may damage the engine.

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

１．

１．This product is for off road use only.

This product is for off road use only.

１．１．

This product is for off road use only. This product is for off road use only.

● This product is legal for sale or use in CA only on vehicles, which may never be driven

on a public highway. Check your state and local laws regarding the use of any performance products.

２．

２．Installation of this product should be performed by an experienced

Installation of this product should be performed by an experienced

２．２．

Installation of this product should be performed by an experienced Installation of this product should be performed by an experienced

● Special tools and modification skills are necessary for the installation of this product.

３．

３．Inspect the vehicle before the installation of this product.

Inspect the vehicle before the installation of this product.

３．３．

Inspect the vehicle before the installation of this product.Inspect the vehicle before the installation of this product.

● Inspect the vehicle and make sure that there are no problems with the vehicle before

installation.

４．

４．Do not use this product for purpose

Do not use this product for purpose other what is intended for.

４．４．

Do not use this product for purpose Do not use this product for purpose

● Damage due to modifications or misuse of this product will void any warranty.

other what is intended for.

other what is intended for.other what is intended for.

mechanic.

mechanic. mechanic.

－2－

Caution

CautionCaution

Caution

CautionCaution

Caution

CautionCaution

Caution

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

１．

１． Disconnect the negative terminal of the battery before installation

Disconnect the negative terminal of the battery before installation

１．１．

Disconnect the negative terminal of the battery before installationDisconnect the negative terminal of the battery before installation

２．

２． Make sure the engine room has cooled down before installation.

Make sure the engine room has cooled down before installation.

２．２．

Make sure the engine room has cooled down before installation.Make sure the engine room has cooled down before installation.

３．

３． Removal and d

Removal and disassemble caution

３．３．

Removal and dRemoval and d

● Make sure to clean the parts that are reused and replace any parts that are damaged.

４．

４． Installation and reassembly caution

４．４．

● Clean the parts thoroughly before installing the parts.

● Make sure to replace gaskets with new part.

● Please refer to the torque spec chart for the proper torque specs for the bolts and nuts.

Jacking and lifting precautions

Jacking and lifting precautionsJacking and lifting precautions

Please follow the basic manufacturer’s recommendation

Please follow the basic manufacturer’s recommendation Please follow the basic manufacturer’s recommendation

Installation and reassembly caution

Installation and reassembly cautionInstallation and reassembly caution

isassemble caution

isassemble cautionisassemble caution

・ When Jacking up the front or real of the vehicle, please make sure to lift

the vehicle up at the proper jack points and use safety stands and Wheel chocks.

・ When Lifting the vehicle, ensure that the front and rear of the vehicle

are well balanced at the proper lift points.

Ｉｍ

Ｉｍｐｏｒｔａｎｔ

ｐｏｒｔａｎｔ

ＩｍＩｍ

Although we have taken all the possible measures to provide the highest quality products, we

Although we have taken all the possible measures to provide the highest quality products, we Although we have taken all the possible measures to provide the highest quality products, we will not be responsible for any damage,

will not be responsible for any damage, or accidents caused by improper use, incorrect

will not be responsible for any damage,will not be responsible for any damage, installation.

installation.

installation.installation.

ｐｏｒｔａｎｔｐｏｒｔａｎｔ

Warning

WarningWarning

Make sure to check the installation before operating the vehicle.

Before starting the engine, make sure that there are no flammable items around the exhaust system and in the engine room.

Start the engine in a well-ventilated area.

or accidents caused by improper use, incorrect

or accidents caused by improper use, incorrect or accidents caused by improper use, incorrect

GReddy Performance Products, Inc.

GReddy Performance Products, Inc.GReddy Performance Products, Inc.

－3－

+ 5 hidden pages