GReddy BRS-501 User Manual

Important

ImportantImportant

Important

ＢＲＳ－５０１

ＢＲＳ－５０１ ＦＣ３Ｓ

ＢＲＳ－５０１ＢＲＳ－５０１

Instruction Manual

Instruction Manual

Instruction ManualInstruction Manual

Please read the manual carefully before installing and using this

Please read the manual carefully before installing and using this

Please read the manual carefully before installing and using this Please read the manual carefully before installing and using this

ＦＣ３Ｓ

ＦＣ３ＳＦＣ３Ｓ

product.

product.

product.product.

This product is for off road use only.

This product is for off road use only.

This product is for off road use only.This product is for off road use only.

MAKE MODEL CHASSIS ENGINE YEAR

MAZDA ＲＸ－７ ＦＣ３Ｓ／ＦＣ３Ｃ １３ＢＴ ８７ − ９２

APPPLICATION

APPPLICATION ：：：：

APPPLICATIONAPPPLICATION

Vented out to atmosphere type
※ Piping to recirculate back to intake is not included.

This kit is designed for the vehicle specified above. Please
do not attempt to install this kit on other application.

＊＊＊＊ＵＳＤＭ

－1－

SAFETY INFORMATION

SAFETY INFORMATION

SAFETY INFORMATIONSAFETY INFORMATION

Ｉｍｐｏｒｔａｎ

Ｉｍｐｏｒｔａｎ tttt

ＩｍｐｏｒｔａｎＩｍｐｏｒｔａｎ

○ This Manual will explain the proper installation procedure of this product.

Please read this manual carefully.
○ This manual was created considering the vehicle to be completely factory spec.
○ While using this product, please keep this manual to use as a reference.
○ The notation shown below is used through out this manual.

Caution

Caution

CautionCaution

Warning

Warning

WarningWarning

♦ If sub injectors are used make sure to mount he injectors after the blow off valve between the

blow off valve and the throttle body.

♦ On some applications, there are possibilities of engine stall if the air is released out to the

atmosphere.
It is recommended to re-circulate the sir back in to intake system before the turbo in-let
To re-circulate the air, replacement of the discharge funnel with optional re-circulation hose
adapter is required.

※ Please prepare necessary part for installation.

Please prepare necessary part for installation.

Please prepare necessary part for installation.Please prepare necessary part for installation.

Product Name Description Code

Re-circulation Adapter

Caution

Caution

CautionCaution

This notation will indicate the important procedures and
instructions to prevent accidents and injury.

This notation will indicate the important procedures and
instructions to prevent life treating accidents and injury.

１９φ １１９００４９２
２９φ １１９００４９３
３２φ １１９００４９４
３４φ １１９００４９５

DO NOT disassemble or mishandle this product.
This will cause the product failure and may damage the engine.

－2－

Ｉｍｐｏｒｔａｎｔ

Caution

CautionCaution

Caution

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

１．

１．This product is for off road use only.

This product is for off road use only.

１．１．

This product is for off road use only. This product is for off road use only.

● This product is legal for sale or use in CA only on vehicles, which may never be driven

on a public highway. Check your state and local laws regarding the use of any
performance products.

２．

２．Installation of this product should be performed by an experienced mechanic.

Installation of this product should be performed by an experienced mechanic.

２．２．

Installation of this product should be performed by an experienced mechanic. Installation of this product should be performed by an experienced mechanic.

● Special tools and modification skills are necessary for the installation of this product.

３．

３．Inspect the vehicle before the installation of this product.

Inspect the vehicle before the installation of this product.

３．３．

Inspect the vehicle before the installation of this product.Inspect the vehicle before the installation of this product.

● Inspect the vehicle and make sure that there are no problems with the vehicle before

installation.

４．

４．Do not use this product for p

Do not use this product for purpose other what is intended for.

４．４．

Do not use this product for pDo not use this product for p

● Damage due to modifications or misuse of this product will void any warranty.

Ｉｍｐｏｒｔａｎｔ

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

１．

１． Disconnect the negative terminal of the battery before installation

Disconnect the negative terminal of the battery before installation

１．１．

Disconnect the negative terminal of the battery before installationDisconnect the negative terminal of the battery before installation

２．

２． Make sure the engine room has cooled down before installation.

Make sure the engine room has cooled down before installation.

２．２．

Make sure the engine room has cooled down before installation.Make sure the engine room has cooled down before installation.

３．

３． Removal

Removal and disassemble caution

３．３．

RemovalRemoval

Please foll

Please follow the basic manufacturer’s recommended procedure

Please follPlease foll

● Make sure to clean the parts that are reused and replace any parts that are damaged.

４．

４． Installation and reassembly caution

Installation and reassembly caution

４．４．

Installation and reassembly cautionInstallation and reassembly caution

● Clean the parts thoroughly before installing the parts.

● Make sure to replace gaskets with new part.

● Please refer to the torque spec chart for the proper torque specs for the bolts and nuts.

Jacking and lifting precautions

Jacking and lifting precautions

Jacking and lifting precautionsJacking and lifting precautions

Ｉｍｐｏｒｔａｎｔ

Ｉｍｐｏｒｔａｎｔ

ＩｍｐｏｒｔａｎｔＩｍｐｏｒｔａｎｔ

Although we have taken all the possible measures to provide the highest quality products, we

Although we have taken all the possible measures to provide the highest quality products, we

Although we have taken all the possible measures to provide the highest quality products, we Although we have taken all the possible measures to provide the highest quality products, we
will not be responsible for any damage, o

will not be responsible for any damage, or accidents caused by improper use, incorrect

will not be responsible for any damage, owill not be responsible for any damage, o
installation.

installation.

installation.installation.

and disassemble caution

and disassemble caution and disassemble caution

ow the basic manufacturer’s recommended procedure.

ow the basic manufacturer’s recommended procedureow the basic manufacturer’s recommended procedure

・ When Jacking up the front or real of the vehicle, please make sure to lift

the vehicle up at the proper jack points and use safety stands and
Wheel chocks.

・ When Lifting the vehicle, ensure that the front and rear of the vehicle

are well balanced at the proper lift points.

Caution

Caution

CautionCaution

Caution

Caution

CautionCaution

Warning

Warning

WarningWarning

Make sure to check the installation before operating the vehicle.

Before starting the engine, make sure that there are no flammable
items around the exhaust system and in the engine room.

Start the engine in a well-ventilated area.

urpose other what is intended for.

urpose other what is intended for.urpose other what is intended for.

r accidents caused by improper use, incorrect

r accidents caused by improper use, incorrect r accidents caused by improper use, incorrect

GReddy Performance Products, Inc.

GReddy Performance Products, Inc.

GReddy Performance Products, Inc.GReddy Performance Products, Inc.

－3－