GReddy AIR INTAKE SYSTEMS Scion FR-S Subaru BRZ 2013 User Manual
Instruction Manual P/N: 12519101
Make: Scion/Subaru/Toyota Model: FR-S/BRZ/86 Year: 2013 Engine: H4-2.0L
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 949-588-8300.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Label Qty. Description Part Number
A 1 Pro Dry S Air Filter 61-90129
B 1 Tube 05-T2013B1
C 1 Housing 05-T2013B2
D 1 Coupling 3”ID x 2”L 05-01106
E 2 Clamp, 048 03-50007
F 1 Grommet 03-50033
G 1 Coupling 1-1/2”ID x 2”L 05-01198
H 1 Clamp, 096 03-50003
I 2 Screw, M4 x .7 x 8 03-50034
J 2 Mini Clamp, 024 03-50093
Installation will require the following tools:
Phillips screw driver, 8mm nut driver, ratchet, extension, 10mm socket & pliers
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public
streets or highways is strictly prohibited in California and others states that have adopted California
emission regulations.
Page 2
D
I
E
F
A
H
G
J
B
C
Page 3
GReddy.com
4
3
REMOVAL
2
1
1
4
2
1
5
5
5
Figure A
Refer to Figure A for step 1-5
Step 1: Remove the three 10mm bolts on the OE housing 1 .
Step 2: Unplug the MAF sensor and unclip the wire harness from the OE intake tube 2 .
Step 3: Remove the crank case hose from the OE tube 3 .
Step 4: Loosen the clamp off the throttle body and cabin sound chamber tube, then remove the OE
intake system out of the vehicle 4 .
Step 5: Remove the five 10mm bolts and two push clips on the front bumper rail 5 .
5
Page 4
Loading...