GReddy AIR INTAKE SYSTEMS Infiniti G37 2008-11 User Manual
* Optional (12529002)
Instruction Manual P/N: 12529001
Make: Infiniti Model: G37 Year: 2008-2011 Engine: V6-3.7L
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 949-588-8300.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Label Qty. Description Part Number
A 1 Pro Dry S Air Filter 61-90126
B 1 Intake Tube 1 05-T3016P1 (Pol)
C 1 Intake Tube 2 05-T3016P2 (Pol)
D 1 Intake Tube 3 05-T3016P3 (Pol)
E 1 Intake Tube 4 05-T3016P4 (Pol)
F 2 Bracket 05-T3016B5
G 2 Reducer Coupling 05-01116
H 2 Straight Coupling 05-00417
I 4 Clamp, #44 03-50019
J 4 Clamp, #48 03-50007
K 2 2" Hose (5/8" ID) 05-00069
L 2 Split Lock Washer 03-50062
M 2 Isolation Mount 03-50022
N 5 Flat Washer 03-50043
O 7 Hex Nut 03-50059
P 2 Hex Head Screw (lrg) 03-50175
Q 4 Cheese Head Screw 03-50034
R 2 MAS Gasket 05-00631
S 1 Bracket 05-T3016B6
T 1 Hex Head Screw (sml) 03-50057
U 1 Splash Shield 12529002 (NOT INCLUDED)
Installation will require the following tools:
Flat head & Phillips screwdriver, Vice grip, Pliers, 8mm socket, 10mm socket, Ratchet & 5/16 nut driver.
Page 2
G G
D
B C
E
A
J
S
T
HH
J
I I
M
P P
K
O Q Q
L
R R
O
L
F
M
NN
K
F
U
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public
streets or highways is strictly prohibited in California and others states that have adopted California
emission regulations.
Page 3
GReddy.com
REMOVAL
2 2
5
1
1 1
1
1
5
44
3 3
Figure A
Refer to Figure A for steps 1-6
Step 1: Remove the engine cover fasteners 1 and remove the engine cover.
Step 2: Loosen the clamp securing the intake tube to the throttle body. 2
Step 3: Remove the airbox mounting bolt. 3
Step 4: Unplug the mass airflow sensor (MAF) sensor wiring harness. 4
Step 5: Disconnect the crankcase breather from the intake tube. 5
Step 6: Remove the intake tube and airbox as one piece. (Some force is required to release the airbox
from the mounting grommets).
Page 4
Loading...