GReddy AIR INTAKE SYSTEMS Honda Accord V6 2013-14 User Manual

Instruction Manual P/N: 12559004
Make: Honda Model: Accord Year: 2013-2014 Engine: V6-3.5L
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100.
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
• Retain factory parts for future use.
Label Qty. Description Part Number
A 1 Air Filter (Pro DRY S) 61-90131 (Grey Media)
B 1 Tube (Polished) 05-T1021P1
C 1 Tube (Wrinkle-Black) 05-T1021B1
D 1 Housing 05-T1021B2
E 1 Coupling Silicone 05-01196
F 1 Trim 1/16” (7 Inches) 05-00149
G 1 Trim 1/16” (9.5 Inches) 05-00149
H 1 Hose 5/8” (15 Inches) 05-00069
I 1 Hose 5/16” (20 Inches) 05-00112
J 1 Isolation Mount M6 03-50022
K 2 Clamp, 044 03-50019
L 1 Spacer 03-50120
M 1 Screw, Hex Head M6 03-50032
N 2 Nut, Hex 03-50059
O 3 Washer, Flat 03-50070
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public streets or highways is strictly prohibited in California and others states that have adopted California emission regulations.
Page 2
D
B
C
E
K
F
G
H I
M
J
GReddy.com
A
Page 3
L
O
N
1
4
3
REMOVAL
5
2
6
5
Figure A
Refer to Figure A for steps 1-6
Note: Make sure car is cool before starting this installation to avoid coolant burns.
Step 1: Pop off engine cover from grommets and remove engine cover 1 .
Step 2: Disconnet the MAF sensor, and then remove the wire harness from the OE air box 2 .
Step 3: Disconnect the crank case line from the OE tube 3 .
Step 4: Loosen the clamp connecting the OE tube to the throttle body 4 .
Step 5: Remove the two bolts holding the OE air box 5 .
Step 6: Pull out the OE air intake system out of the engine bay 6 .
Page 4
Loading...
+ 8 hidden pages