GReddy AERO KIT Installation Manual

ＧＲｅｄｄｙ

ＧＲｅｄｄｙ ＡＥＲＯ

ＧＲｅｄｄｙＧＲｅｄｄｙ

ＡＥＲＯ ＫＩＴ

ＡＥＲＯＡＥＲＯ

350Z GT Aero Front Bumper

Installation Manual

About this Instruction Manual

IMPORTANT

◎

◎ Please read these instructions before installation.

◎◎

◎

◎ This is for installation on a stock vehicle.

◎◎

◎

◎ Please keep this manual as long as you own the product.

◎◎

◎

◎ This document includes the following notes:

◎◎

Warning

Serious injury or life threatening situations can occur if the warning is

disregarded.

ＫＩＴ

ＫＩＴＫＩＴ

Note

Installation should be done by professionals.

Please follow the manufacturer’s instructions and guidelines for basic

After making modifications to factory metalwork, be sure to cover the areas with

After making modifications to factory metalwork, be sure to cover the areas withAfter making modifications to factory metalwork, be sure to cover the areas with

After making modifications to factory metalwork, be sure to cover the areas with

After painting the parts, attach the parts to the vehicle slowly as to not crack the

that had previous body damage may have more difficulty with correct

product out of direct sunlight before mounting, surface temps reaching 104

Before Mounting

Important

◎

◎ This product is for off-road use only.

◎◎

◎

◎ Installation and painting should be done by professional paint shops only.

◎◎

● Mounting painted products requires special tools and professional experience.

◎◎◎◎

During the mounting process, modifications may nee to be made to the vehicle body.

● During modifications, please exercise proper safety.

◎◎◎◎

Please do all vehicle inspections and maintenance before attempting installation.

● Please confirm below fitment of this product on your application.

● Vehicles

installation, depending on repairs.

◎

◎ Before installation, check the parts list to be sure all parts are received.

◎◎

◎

◎ This part is not meant to fit with other aero parts.

◎◎

◎

◎ Please keep the

◎◎

degrees F and above may cause warping.

◎◎◎◎

GReddy will not handle any warranty claims after it has been altered.

Please be sure to read.

Mounting Notes

Warning

Note

Note

NoteNote

●●●● Wear prote

●●●●

paint to prevent rust..

paint to prevent rust..

paint to prevent rust.. paint to prevent rust..

Note

paint.

maintenance.

Wear protective goggles and masks.

Wear proteWear prote

ctive goggles and masks.

ctive goggles and masks.ctive goggles and masks.

＜＜＜＜350Z Front Bumper Installation

350Z Front Bumper Installation＞＞＞＞

350Z Front Bumper Installation350Z Front Bumper Installation

This product is meant to fit Nissan 350Z only. Please check the parts before mounting.

■■■■ Parts List

Front Bumper Cover

■ Mounting Procedure

Mounting Procedure

Mounting ProcedureMounting Procedure

1)

1) Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.

Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.

1)1)

Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.Please follow the manufacturer’s repair manual for proper front bumper cover removal procedure.

（（（（※※※※Remove the side bracket from the OEM

Remove the side bracket from the OEM bumper.

Remove the side bracket from the OEM Remove the side bracket from the OEM

（（（（※※※※Remove the impact foam from the front of the bumper.

Remove the impact foam from the front of the bumper.））））

Remove the impact foam from the front of the bumper.Remove the impact foam from the front of the bumper.

2)

2) Install the side bracket onto the GT bumper by reversing the steps used to remove it.

Install the side bracket onto the GT bumper by reversing the steps used to remove it.

2)2)

Install the side bracket onto the GT bumper by reversing the steps used to remove it.Install the side bracket onto the GT bumper by reversing the steps used to remove it.

3)

3) Install the GT bumper using the factory clips and screws to the original locations.

Install the GT bumper using the factory clips and screws to the original locations.

3)3)

Install the GT bumper using the factory clips and screws to the original locations.Install the GT bumper using the factory clips and screws to the original locations.

This completes the

This completes the installation.

This completes the This completes the

Note 1 ： This job is re commende d for 2 people.

Note 2 ： Temporarily install th e bumpe r to ch eck fitment before painting.

installation.

installation.installation.

××××

1111

bumper.））））

bumper.bumper.

ＧＲｅｄｄｙ

ＧＲｅｄｄｙ ＡＥＲＯ

ＧＲｅｄｄｙＧＲｅｄｄｙ

ＡＥＲＯ ＫＩＴ

ＡＥＲＯＡＥＲＯ

350Z GT Wide Fender Kit

Installation Manual

About this Instruction Manual

IMPORTANT

◎

◎ Please read these instructions before installation.

◎◎

◎

◎ This is for installation on a stock vehicle.

◎◎

◎

◎ Please keep this manual as long as you own the product.

◎◎

◎

◎ This document includes the following notes:

◎◎

Warning

Serious injury or life threatening situations can occur if the warning is

disregarded.

ＫＩＴ

ＫＩＴＫＩＴ

Note

Installation should be done by professionals.