GReddy 300ZX User Manual

1. Parts List

1. Intercooler (Type 15) 1

2. Intake Pipe I-1 (50∅ Aluminum) 1

3. " I-2 (50∅ Aluminum) 1

4. " I-3 (50∅ Aluminum) 1

5. " I-4 (50∅ Aluminum) 1

6. Suction Pipe (Aluminum Elbow) 1

7. Rubber Hose 50∅ x 70mm Straight 4

8. " 50∅ - 60∅ (Reducer) 4

9. Hose Band 50∅ Tridon #32 12

10. " 60∅ Tridon #36 4

11. " 80∅ Tridon #46 2

12. Intercooler Bracket A 1 set

13. Intercooler Bracket B 1 set

14. Aluminum Spacer t=8mm 2

15. Airinx AY-S 2

16. Airinx Adapter S80 2

17. Zip Ties 150mm 5

18. 6mm X 15mm P=1.0 Stainless B S/W F/W - 4

19. 6mm X 15mm P=1.0 Stainless B S/W F/W N 4

20. 6mm X 25mm P=1.0 Stainless Stud B S/W F/W N 4

21. 8mm X 15mm P=1.25 Stainless B S/W F/W - 2

1 2 3

4 5 6

7 8 9 - 11 12

13 14 15 16

17 18 - 21

2. Stock Parts Removal

Please refer to the factory service manual for the proper
stock parts removal.

2-1 Disconnect the negative terminal of the battery.
2-2 Remove the under engine cover and the inner fender protector.
2-3 Remove the front bumper and the front finisher.
2-4 Disconnect the Airflow meter connector and remove the air filter assembly.
2-5 Remove the airflow meter from the air filter assembly.
2-6 Remove the bumper reinforcement and the condenser air duct.
2-7 Remove the Fog lamps off from the bumper reinforcement.
2-8 Remove the left and the right side horn.
2-9 Remove the factory intercooler and the intercooler hoses.