Great World GW-6078TBT Operating Manual

VERSION: 23-FY17-V03

MODEL : GW-6078TBT

OPERATING MANUAL

CUSTOMER SERVICE NO

1-888-878-8820

IMPORTANT

OPERATING INSTRUCTIONS

When using this or any electrical device, precautions should always be
taken to reduce the risk of fire, electric shock, injury to persons, and/or
damage to property. Please study the following instructions carefully
PRIOR to using this device.

1. Read ALL instructions contained in this Operating Manual BEFORE
using this electric fireplace insert.

2. This electric fireplace insert is hot when in use. To avoid burns, never
allow bare skin to touch hot surfaces. Use handles (if provided) when
moving this electric fireplace insert. Keep all flammable / combustible
materials, including (but not limited to) furniture, pillows, bedding, papers,
clothes, and curtains a minimum of 3 feet (0.9m) from this electric fireplace
insert at all times.

3. Proper ventilation is required when operating this electric fireplace insert.
NEVER cover this device with anything which could restrict air circulation

to or from the unit.

4. To prevent a possible fire, DO NOT install or use this electric fireplace
insert directly on carpet, beds, or similar soft surfaces as this may block air
intakes, exhaust outlets or otherwise restrict air circulation beneath the
heater.

5. Extreme caution is necessary when this electric fireplace insert is used
by or near children or individuals with restricted mobility.

6. NEVER leave this electric fireplace insert unattended when in use.

7. Always unplug this electric fireplace insert when not in use. Turn off all
controls prior to removing the plug from the power source.

8. This electric fireplace insert is designed for indoor use only. NEVER use

this device outdoors.

9. Connect this electric fireplace insert only to properly grounded outlets.

10. Use caution and do not strike the glass on this electric fireplace insert.

11. NEVER use this device in bathrooms, laundry areas, or similar
locations where it may come into contact with water.

12. Avoid placing the power cord in high traffic areas where it could
become damaged or be a trip hazard.

13. DO NOT run the power cord under carpeting, furniture, or appliances.

14. NEVER cover the power cord with throw rugs, runners, or similar
coverings.

15. DO NOT operate this device with a damaged power cord or plug.

16. DO NOT operate this device if the cord becomes damaged,

Note: This fireplace can be controlled via Bluetooth using your Apple or
Android device. Visit the APP Store or Google Play and enter “S.W. Link”
in the search bar to download the APP.

Electric Heater

after the units malfunctions in any way, has been dropped, o r becomes
damaged in any manner. If this happens, discard the unit or return to an
authorized service facility to inspection and/or repair.

17. DO NOT insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock, fire, or damage to
this electric fireplace insert.

18. This electric fireplace insert utilizes sparks and arcing in its internal
operation. NEVER use this device in areas where gasoline, paint, or other
flammable liquids are used or stored.

19. Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).

20. NEVER burn wood or other materials of any kind in this electric
fireplace insert.

21. Always use a licensed electrician for any maintenance to this device.

22. Always use properly grounded, fused, and polarized outlets.

23. Always use ground fault protection where required by local electrical
code.

24. Always disconnect the device from its power source before moving the
device or performing any cleaning or maintenance.

25. To avoid damage when transporting or storing this electric fireplace
insert, always keep both the insert and its power cord in a dry place and
free from excessive vibration.

26. Use this electric fireplace insert ONLY as described in this Operating
Manual. Using this device in a manner other than recommended by the
manufacturer may cause fire, electric shock, injury to persons, and/or
damage to property.

27. To reduce the risk of fire, do not store or use gasoline or other
flammable vapors and liquids in the vicinity of the heater.

28. To disconnect heater, turn controls to off, and turn off power to heater
circuit at main disconnect panel.

29. To prevent a possible fire, do not block air intakes or exhaust in any
manner.

30. Warn that the heater must be properly installed before it is used.

31. If the product is not used for a long period of time, please unplug the
power cord from wall outlet to assure safety .

SAVE THESE INSTRUCTIONS

OPERATION DETAILS

Reminders

1. Please make sure to read through “IMPORTANT OPERATING
INSTRUCTIONS” above before operating this electric fireplace insert.

2. To avoid malfunction, please be certain that the input voltage of the
electric fireplace insert and the voltage of your outlet are identical
before plugging.

3. Check the unit for any damage that may exist (such as missing screw,
dents, etc) before using this device.

4. This product undergoes strict examination and testing before
packaging to insure that all parts are in good working condition.
Should any defect be noticed, call our customer service number at
1-888-878-8820.

Remote Control Battery Installation

Remote Control Function

Remote Control Control Panel

Reminder: There are 2 indicators at the right side of control panel, when
the heater has its initial use and heater function is set at the high level,
both L and H indicators will light up; when the heater is set at the low level,
only L indicator will light up. This model has thermostat function,when the
environment temperature reaches the desired temperature, heater will shut
down automatically; however, the indicator will still light up to let users
know the heater mode is still active, not the current heater working level.

-There are six(6) buttons on the remote control and six(6) corresponding
buttons on the control panel of the electric fireplace insert.

1. [POWER( or )] turns the electric fireplace insert either on or off.
When the heater is off, press this button once to turn the heater on;
press it again to turn the heater off.

2.[DIMMER( or )] controls the brightness of flame and lo g, there are 5
levels. When heater is turned on the first time, flame and log is at their
brightest level. Press the button and the brightness of the logs will begin
to change, from the brightest level to the weakest level. The
corresponding digital display will blink , , , , for a period of time.

If there is no other operation, digital display will go back to default

temperature setting and show environmental temperature.

3.[HEATER( or )] controls the heating element. Press once, the heat

Receiver

Low heat l evel Indicator

1. Pull out the battery holder from
the bottom of the remote control.

2. Place cell battery in the battery holder
with “+”(positive) mark face up to
correspond the “+” mark on the battery
holder, then push it into the remote
control.

3. Assembly complete.

UP

DOWN

Digital Display

is at the high level, H and L indicator will both light up; press
again, the heat is at the low level, L indicator will light up; then
press again, heat stops, and heating element is turned off,
both H and L indicator are off.

4. [TIMER( or )] is the timer setting button. Press once, the digital
display will blink which indicate the time can be entered, so touch [UP]
or [DOWN] button may increase or decrease the time in between 0-12
hours.

5. [UP( or )] increases the time and temperature. When the mode is at
timer setting, press once, the digital display will increase by 0.5(half)

hour. Long press this button, time will go up continuously. The options
are between 0-12 hours; when the mode is at temperature setting, press
once, temperature will increase by 1 ℉. Long press this button,
temperature will go up continuously. The options are between
60℉-97℉.

6. [DOWN( or )] decreases the time and temperature. When the mode

is at timer setting, press once, the digital display will decrease by

0.5(half) hour. Long press this button, time will go down continuously.

The options are between 12-0 hours; when the mode is at temperature
setting, press once, temperature will decrease by 1 ℉. Long press this
button, temperature will go down continuously. The options are between
97℉-60℉.

7. [ ] indicates the Bluetooth connection is successfully paired if the

indicator is on. Refer to the operation manual in the APP to continue.
Other Important Features

8. To protect the heater, the fan will continue turning for quite a few

seconds after heater is shut down.

9. When the [POWER] is firstly turned on, only the flame and log work; to

have the heat to blow out, you have to press [HEATER]. Other than
[POWER] button, all other operation button will function when the power
is turned on.

10. If the temperature inside of the electric fireplace insert becomes
abnormally high, the temperature protection mechanism will turn on
automatically and the heater will be shut down within a few seconds (fan
will be stopped in around 15 seconds of retardation). Any operation are
prohibited. Please remove the power cord from outlet and wait a few
minutes for heater to cool down or till temperature protection mechanism
reconnect, then plug in the power cord to resume the condition before
the abnormality of the electric heater.
Temperature setting and operation

DOWN

UP

High heat level Indicator
Bluetooth connection Indicator