Great Plains Seed-Lok User Manual

Great Plains Mfg., Inc.

Installation Instructions

Row Unit 1999

Seed-Lok Option

Used with:

RU99

•

SRU99

•

General Information

When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and

!

!

the lives of others depend on it!

These instructions explain how to install the Seed-Lok. The
Seed-Lok wheels mount on the row-unit bodies and firm seeds
into the seedbed for more ev en plant emergence .

These instructions apply to:

404-093K Seed Lok 99 Row Unit

Manual Update

Refer to the drill operator’ s manual for detailed information on
safely operating, adjusting, troubleshooting and maintaining the
Seed-Lok. Refer to the parts manual for part identification.

Assembly Instructions

To install Seed-Lok on one row unit:

1. Remove side-depth wheels from row unit
by loosening and removing pivot bolt on
wheel arm (1).

2. Remove one disk (2) from the row unit.

NOTE: Notice how many shim washers are
used on the disk. You must replace the disk
with the same number of shim washer.

3. Remove bolts (3) holding disk scrapers
on row-unit body.

• PT1230 Operator’s Manual . . . . . . . . . . . . . . . .401-069M-B

• PT6030 and PT8030 Operator’s Manual . . . . . .401-032M-B

• 60303P and 80303P Operator’s Manual . . . . . .401-008M-A

• RU1999 and SRU1999 Parts Manual. . . . . . . . . . .404-086P

Before You Start

Page 4 is a detailed listing of parts included in the Seed-Lok
package. Use this list to inv entory parts received.

3

1

2

© Copyright 1999 Printed 6/22/99

404-090M

18100

1

Assembly

4. Place spring (1) over recessed end of
lock rod (2).

Great Plains Mfg., Inc.

1

2

18101

5. Install lock rod through hole in top of row­unit body , with spring at top. Assemb le le­ver (1) onto top of rod with cotter pin (2).

1

2

18102

Row Unit 1999 Seed-Lok Option 404-090M 4/8/04

2