Great Plains NTA2000D User Manual
Table of Contents Part Number Index
Parts Manual
No-Till Air Drill
NTA 2000D
Read the Operator's manual entirely. When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
19765
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2012 Printed 08/30/12 148-632P
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................4
Using This Manual...............................................................4
Manual Replacement Information.......................................4
Manual Revisions................................................................4
Touch-up Paint....................................................................4
Hardware Legend................................................................5
Replacement Hardware......................................................5
Serial Numbers...................................................................5
Part Number Service Coding..............................................5
Frame..............................................................................6
Tongue To Frame.................................................................6
Rockshaft To Frame............................................................8
Frame To Frame................................................................10
Tire And Hub.....................................................................12
Upper Walkboard And Handrail.........................................14
Lower Walkboard And Handrail.........................................16
Opener Wing To Frame.....................................................18
Coulter Wing To Frame......................................................20
Weight Bracket..................................................................22
Coulter Toolbar..................................................................24
Opener Toolbar..................................................................26
Lights.................................................................................28
Box And Meter.............................................................30
Box To Frame....................................................................30
Box Lid..............................................................................32
Box Components...............................................................34
Meter Components (Part 1)...............................................36
Meter Components (Part 2)...............................................40
Meter Drive........................................................................42
Meter Box Manifold...........................................................44
Fan To Frame................................................................46
Fan To Frame....................................................................46
Tongue Hydraulic Cylinder (810-195C 3x8x1.25 Rod)......72
Coulter Wing Hydraulic Cylinder (810-434C 3.5x8x1.5
Rod)............................................................................74
Opener Wing Hydraulic Cylinder (810-438C 3.5x12x1.25
Rod)............................................................................76
Double Selector Valve (810-274C)....................................78
Monitor.........................................................................80
Monitor..............................................................................80
Agtron Sensor (Option).....................................................82
Decals...........................................................................84
Decals...............................................................................84
Markers.........................................................................86
Markers.............................................................................86
Marker Disk And Hub (113-563S).....................................90
Marker Hydraulics.............................................................92
Marker Hydraulic Cylinder (810-436C 2.5x34x1.25 Rod)..94
Sequence Valve (810-197C).............................................96
Harrows........................................................................98
Harrow...............................................................................98
Auger..........................................................................100
Auger Arm.......................................................................100
Auger...............................................................................102
Auger Drive.....................................................................104
Auger Hydraulics.............................................................106
Small Seeds...............................................................108
Small Seeds Box Mounting.............................................108
Small Seeds Box Components.......................................110
Small Seeds Drive...........................................................112
Part Number Index.....................................................115
Drive.............................................................................48
Drive..................................................................................48
Coulters........................................................................51
Coulters (S/N 1027GG-)....................................................52
Coulters (S/N 1028GG+)...................................................54
Openers........................................................................56
00 Series Short Opener....................................................56
00 Series Long Opener.....................................................58
5" & 6" Seed-Lok (Option).................................................60
Press Wheels...............................................................62
2" x 13" Single Press Wheel..............................................62
3" x 13" Single Press Wheel..............................................64
Hydraulics....................................................................66
Transpor t And Tongue Hydraulics.....................................66
Fan And Fold Hydraulics...................................................68
Opener Wing Hydraulic Cylinder (810-435C 4x12x1.5
Rod)............................................................................70
© Copyright 2012 All rights reserved Printed 08/30/12
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
148-632P - 2 - 08/30/12
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
0
00 Series Long Opener................................................58
00 Series Short Opener...............................................56
2
2" x 13" Single Press Wheel.........................................62
3
3" x 13" Single Press Wheel.........................................64
5
5" & 6" Seed-Lok (Option)............................................60
A
Agtron Sensor (Option)................................................82
Auger..........................................................................102
Auger Arm..................................................................100
Auger Drive................................................................104
Auger Hydraulics........................................................106
B
Box Components..........................................................34
Box Lid.........................................................................32
Box To Frame...............................................................30
C
Coulter Toolbar.............................................................24
Coulter Wing Hydraulic Cylinder (810-434C 3.5x8x1.5
Rod).......................................................................74
Coulter Wing To Frame.................................................20
Coulters (S/N 1027GG-)...............................................52
Coulters (S/N 1028GG+)..............................................54
D
Decals..........................................................................84
Double Selector Valve (810-274C)...............................78
Drive.............................................................................48
Marker Hydraulics........................................................92
Markers........................................................................86
Meter Box Manifold......................................................44
Meter Components (Part 1)..........................................36
Meter Components (Part 2)..........................................40
Meter Drive...................................................................42
Monitor.........................................................................80
O
Opener Toolbar.............................................................26
Opener Wing Hydraulic Cylinder (810-435C 4x12x1.5
Rod).......................................................................70
Opener Wing Hydraulic Cylinder (810-438C 3.5x12x1.25
Rod).......................................................................76
Opener Wing To Frame................................................18
R
Rockshaft To Frame........................................................8
S
Sequence Valve (810-197C)........................................96
Small Seeds Box Components...................................110
Small Seeds Box Mounting........................................108
Small Seeds Drive......................................................112
T
Tire And Hub................................................................12
Tongue Hydraulic Cylinder (810-195C 3x8x1.25 Rod)..72
Tongue To Frame............................................................6
Transpor t And Tongue Hydraulics................................66
U
Upper Walkboard And Handrail....................................14
W
Weight Bracket.............................................................22
F
Fan And Fold Hydraulics..............................................68
Fan To Frame...............................................................46
Frame To Frame...........................................................10
H
Harrow..........................................................................98
L
Lights............................................................................28
Lower Walkboard And Handrail....................................16
M
Marker Disk And Hub (113-563S)................................90
Marker Hydraulic Cylinder (810-436C 2.5x34x1.25
Rod).......................................................................94
08/30/12 - 3 - 148-632P
Table of Contents Part Number Index
148-632P - 4 - 08/30/12
Table of Contents Part Number Index
08/30/12 - 5 - 148-632P
Tongue To Frame
(Applies to NTA2000D only)
Table of Contents Part Number Index
19719
148-632P - 6 - 08/30/12
Table of Contents Part Number Index
Tongue To Frame
(Applies to NTA2000D only)
Image No.dwg19719
FRONT HITCH WELDMENT148-150H1.
FRONT HITCH INNER TUBE WLDMT148-163H2.
DEPTH INDICATOR PLATE148-296D3.
STROKE GAUGE POINTER 3000PSI148-387H5.
SAFETY CHAIN WASHER194-070D6.
HHCS 3/4-10X9 GR5802-164C7.
HHCS 1/2-13X1 GR5802-258C8.
HHCS 1-8X10 GR5 PLT802-429C9.
NUT HEX 3/4-10 PLT803-027C10.
NUT HEX 1-8 PLT803-031C11.
NUT HEX 1 1/4-7 PLT803-034C12.
NUT HEX NYLOCK 1/2-20 PLT803-298C13.
WASHER LOCK SPRING 1/2 PLT804-015C14.
WASHER FLAT 1/2 USS PLT804-017C15.
WASHER LOCK SPRING 3/4 PLT804-023C16.
WASHER FLAT 3/4 USS PLT804-024C17.
WASHER LOCK SPRING 1 PLT804-027C18.
WASHER FLAT 1 SAE804-029C19.
WASHER LOCK 1 1/4 SPRING PLT804-030C20.
PIN CLEVIS 1 X 2 3/4 USABLE LG805-004C21.
PIN COTTER 1/4 X 2 PLT805-021C22.
SPRING HOSE LOOP HEAVY807-073C23.
CYL 3X8X1.25 ROD (TIE) NO PINS810-195C24.
DECAL STROKE GAUGE818-181C25.
BUSHING CYL 1 1/4 X 1 X 1890-005C26.
SAFETY CHAIN 20000 LB890-183C27.
SCREW JACK 5000# 15-30 SD-WND890-246C28.
NTA2000 TONGUE REAR CROSS PIN148-881D29.
HHCS 5/8-11X3 1/2 GR5802-162C30.
NUT LOCK 5/8-11 PLT803-024C31.
NUT HEX 1-8 NYLON INSERT PLT803-038C32.
NTA2000 HYD TONGUE WLMT148-469H33.
NTA2000 MAIN FRAME EXTEN WLDMT148-465H34.
HHCS 1 1/4-7X4 GR5802-298C35.
HHCS 5/16-18X2 1/2 GR5802-172C36.
WASHER LOCK SPRING 5/16 PLT804-009C37.
1/4 MARKER HYD HOSE GUARD113-370D39.
BUSHING 2 1/4 OD X 2 ID X 2 LG890-051C42.
PIN COTTER 3/16 X 2805-058C44.
CYLINDER DEPTH CHANNEL ASSY148-133S47.
HHCS 1-8X2 3/4 GR. 5802-615C48.
WASHER FLAT 1/2 SAE PLT804-016C49.
NUT HEX NYLOCK 1/2-13803-147C50.
NTA2000 MAIN FRAME WELDMENT148-462H51.
NTA2000 FOLD STOP BUMPER248-178D52.
HHCS 1/2-13X8 1/2 GR5802-154C53.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
Formerly 148-297DWASHER - SAFETY CHAIN SA500-064D4.
Formerly 196-112D3-HOSE CLAMP BRACKET196-146D38.
Marker option onlyNTA2000 MKR FOLD SADDLE PLATE113-759D40.
Marker option onlyHHCS 1/2-13X1 1/2 GR5802-091C41.
Marker option onlyNUT HEX 1/2-13 PLT803-020C43.
Formerly 805-152CPIN 3/8 X 3 USABLE LW/PIN805-001C45.
Supplied with item 45PIN HAIR COTTER .094805-010C46.
08/30/12 - 7 - 148-632P
Rockshaft To Frame
(Applies to NTA2000D only)
Table of Contents Part Number Index
19720
148-632P - 8 - 08/30/12
Table of Contents Part Number Index
Rockshaft To Frame
(Applies to NTA2000D only)
Image No.dwg19720
NTA2000 GAUGE WHEEL WELDMT DOM148-607H2.
CYL 4X12X1.5 ROD (TIE ROD)810-435C4.
NTA2000 PIVOT LOCK PUSH ARM148-464H5.
NTA2000 PIVOT LOCK LUG148-777D6.
3-BOLT PIVOT BUSH 4 1/2 ID TB148-402D7.
WASHER FLAT 1 1/4 SAE PLT804-039C8.
PIN COTTER 3/16 X 2 1/4 PLT805-094C9.
WASHER MACH 1.75 X 1.00 X 18GA804-082C11.
NUT LOCK 3/4-10 PLT803-026C12.
HHCS 3/4-10X2 1/2 GR5802-212C13.
WASHER LOCK SPRING 3/4 PLT804-023C14.
NUT HEX 3/4-10 PLT803-027C15.
GREASE ZERK STRAIGHT 1/4-28800-001C17.
CYL LOCK CHANNEL WELDMENT148-123H18.
PIN HAIR COTTER .094805-010C20.
HHCS 1-8X5 1/2 GR5802-205C21.
WASHER FLAT 1 SAE804-029C22.
WASHER FLAT 1 SAE804-029C24.
WASHER LOCK SPRING 1 PLT804-027C25.
NUT HEX 1-8 PLT803-031C26.
MW STOP BUSH SET 1 1/2 SBS150810-443C27.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
Includes items: 17, & 21-26ROCKSHAFT BRG ASSY196-146K1.
(S/N 1044GG+)NTA2000 1 1/4 GA WHL FLEX LUG248-318D3.
(S/N 1043GG-)NTA2000 GAUGE WHL FLEX LUG248-050D3.
(S/N 1044GG+)PIN CLEVIS 1 X 2 29/64 USABLE805-134C10.
(S/N 1043GG-)PIN CLEVIS 1 X 2 1/4 GR5 PLT805-187C10.
(S/N 1044GG+)BUSH 1 1/2ODX1 1/4IDX1 1/4LONG890-309C16.
(S/N 1043GG-)BUSHING SPINDLE 1 1/2X1 1/4X1890-011C16.
Formerly 805-152CPIN 3/8 X 3 USABLE LW/PIN805-001C19.
Only available in assembly item 1ROCKSHAFT BRG SUB ASSY196-145V23.
(S/N 1044GG+)CYL PIN NR 1.25X3.09X2.63 W/GR196-409H28.
(S/N 1043GG-)PIN CLEVIS 1 1/4 X 3 3/8 GR5805-196C28.
08/30/12 - 9 - 148-632P
Frame To Frame
(Applies to NTA2000D only)
Table of Contents Part Number Index
19721
148-632P - 10 - 08/30/12
Table of Contents Part Number Index
Frame To Frame
(Applies to NTA2000D only)
Image No.dwg19721
NTA2000 PIVOT FRAME WELDMENT148-429H1.
NTA2000 PIVOT SHAFT WELDMENT148-618H2.
HHCS 3/4-10X2 1/2 GR5802-212C3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
NUT HEX 3/4-10 PLT803-027C5.
NTA2000 PIVOT BOLT WLMT148-553H6.
PIVOTTHRUST WASHER804-102C7.
BSHG 3.19IDX3.25ODX3.0L BRONZE822-056C8.
HHCS 5/8-11X3 GR5802-059C9.
WASHER FLAT 5/8 SAE PLT804-021C10.
U-BOLT 1/2-13 X 1 13/16 X3 3/4806-013C11.
NUT HEX JAM 5/8-11 PLT803-023C12.
NUT LOCK 5/8-11 PLT803-024C13.
ROLLER STOP148-023D14.
PIN ROLL 1/4X1 3/4805-041C15.
ROLLER STOP PIN148-022D16.
SPRING 6 LEAF 24 CENTERS807-195C17.
NUT HEX 1/2-13 PLT803-020C18.
WASHER LOCK SPRING 1/2 PLT804-015C19.
U-BOLT 3/8-16 X 1 7/8 X 7 GR 5806-014C20.
CYLINDER STABILIZER810-026C21.
STABILIZER CYL. BOOT816-039C22.
GREASE ZERK STRAIGHT 1/4-28800-001C23.
NUT HEX 1-8 NYLON INSERT PLT803-038C24.
NUT LOCK 3/8-16 PLT803-013C25.
RPBY 196-146D196-112D26.
WASHER LOCK SPRING 5/16 PLT804-009C27.
HHCS 5/16-18X1 1/4 GR5802-010C28.
1/4 MARKER HYD HOSE GUARD113-370D29.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
08/30/12 - 11 - 148-632P
Tire And Hub
(Applies to NTA2000D only)
Table of Contents Part Number Index
19722
148-632P - 12 - 08/30/12
Table of Contents Part Number Index
Tire And Hub
(Applies to NTA2000D only)
Image No.dwg19722
HHCS 3/4-10X5 GR5802-069C1.
NUT LOCK 3/4-10 PLT803-026C2.
SPINDLE SGL 2.73X15.97815-099C3.
8-BOLT HUB SEAL816-019C4.
BRG CONE 2.00IDX1.18WD #3780822-036C5.
BRG CUP 3.67ODX.93WD #3720822-037C6.
HUB STUD 5/8-18X2 1/2 GR5802-182C7.
8-BOLT WHEEL HUB MACH.200-006D8.
BRG CUP 3.00ODX.75WD #2720822-039C9.
BRG CONE 1.31IDX1.01WD #2790822-038C11.
7/8 SPINDLE WASHER, HARDENED181-064D12.
PIN COTTER 3/16 X 1 1/4 PLT805-016C13.
NUT HEX SLOTTED 7/8-14 PLT803-029C14.
REPLACED BY 890-032CP50200115.
TIRE SKID ST 395/55B16.5 NHS814-206C17.
RIM 16.5X12, 8 BLT 6 PILT 8 BC814-208C18.
VALVE STEM METAL TR-575 TUBLES814-210C19.
NUT LUG 5/8-18 X 90 DEG PLT803-219C20.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 6-9HUB 8 BOLT 5790# W/CUPS&STUDS815-101C10.
Includes items 3-15,20HUB & SPINDLE ASY 8 BOLT 5790#815-103C16.
Includes items 17,18,19RH TIRE/RIM 395/55B16.5 SKID 8196-272K21.
Includes items 17,18,19LH TIRE/RIM 395/55B16.5 SKID 8196-273K21.
08/30/12 - 13 - 148-632P
Table of Contents Part Number Index
Upper Walkboard And Handrail
(Applies to NTA2000D only)
19467
148-632P - 14 - 08/30/12
Table of Contents Part Number Index
Upper Walkboard And Handrail
(Applies to NTA2000D only)
Image No.dwg19467
HHCS 5/8-11X6 1/2 GR5802-335C1.
WASHER FLAT 5/8 HARD ASTMF436804-095C2.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C3.
NTA2000 2850L BIN REST WELDMT167-111H4.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C5.
NTA2000 UPPER PLATFORMSUPPORT148-560H6.
NUT FLANGE LOCK 3/8-16 PLT803-209C7.
NTA2000 UPPER PLATFORMWELDMT148-471H8.
NTA2000 PLATFORM HAND RAIL248-123D9.
NTA1300 STEP HAND RAIL148-805D10.
RHSNB 3/8-16X1 3/4 GR5802-252C11.
NUT LOCK 3/8-16 PLT803-013C12.
NTA2000 HANDRAIL BRC JOGD LONG248-075D13.
NTA2000 HANDRAIL BRC JOGD SHRT248-076D14.
HHCS 1/2-13X1 3/4 GR5802-082C15.
WASHER FLAT 1/2 USS PLT804-017C16.
NTA1300 STEP PIVOT TUBE148-812D17.
WASHER LOCK SPRING 1/2 PLT804-015C18.
NUT HEX 1/2-13 PLT803-020C19.
NTA1300 STEP WELDMENT148-470H20.
HHCS 3/8-16X2 GR5802-143C21.
HHCS 1/2-13X1 1/4 GR5802-034C22.
NTA2000 SEED HOSE GUIDE248-107D23.
FLEX GUARD HOSE.594 OD X.413ID817-044C24.
WASHER FLAT 3/8 USS PLT804-011C25.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
08/30/12 - 15 - 148-632P
Table of Contents Part Number Index
Lower Walkboard And Handrail
(Applies to NTA2000D only)
19471
148-632P - 16 - 08/30/12
Table of Contents Part Number Index
Lower Walkboard And Handrail
(Applies to NTA2000D only)
Image No.dwg19471
U-BOLT 1/2-13 X 2 X 4806-092C1.
WASHER LOCK SPRING 1/2 PLT804-015C2.
NUT HEX 1/2-13 PLT803-020C3.
NTA2000 LOWER PLATFORM WELDMT148-497H4.
HHCS 1/2-13X1 3/4 GR5802-082C5.
WASHER FLAT 1/2 USS PLT804-017C6.
NTA1300 STEP HAND RAIL148-805D7.
NTA1300 STEP PIVOT TUBE148-812D8.
NTA1300 STEP WELDMENT148-470H9.
U-BOLT 3/8-16X2X4806-001C10.
NUT HEX 3/8-16 PLT803-014C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
HHCS 3/8-16X2 GR5802-143C13.
NTA2000 WALKBOARD SUPPORT TUBE248-045D14.
NUT LOCK 3/8-16 PLT803-013C15.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
08/30/12 - 17 - 148-632P
Table of Contents Part Number Index
Opener Wing To Frame
(Applies to NTA2000D only)
19468
148-632P - 18 - 08/30/12
Table of Contents Part Number Index
Opener Wing To Frame
(Applies to NTA2000D only)
Image No.dwg19468
NTA2000 PIVOT FRAME WELDMENT148-429H1.
NTA2000 OPENR WING TOOL BAR LH148-442H2.
NTA2000 OPENR WING TOOL BAR RH148-443H3.
NTA2000 OPENR WING TRANS BRACE148-459H4.
NTA2000 OPENER TRANS LIFT ARM148-460H5.
CYL 3.5X12X1.25 ROD (TIE ROD)810-438C6.
PIN CLEVIS 1 X 4 11/16 GR 5805-174C7.
WASHER FLAT 1 SAE804-029C8.
PIN COTTER 3/16 X 2805-058C9.
HHCS 1/2-13X4 1/2 GR5802-413C10.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C11.
HHCS 3/8-16X3 1/2 GR5802-147C12.
NUT LOCK 3/8-16 PLT803-013C13.
GREASE ZERK STRAIGHT 1/4-28800-001C14.
6M TOOLBAR ROLLER248-049D15.
HHCS 3/4-10X5 GR5802-069C16.
NUT LOCK 3/4-10 PLT803-026C17.
NTA2000 OPENER WING HINGE PIN248-037D18.
NUT HEX JAM 1-8 PLT803-030C19.
HHCS 1-8X2 1/2 GR5802-096C20.
NTA2000 OPN WING LATCH WLDMNT148-551H21.
SPRING LEVER807-007C22.
NTA2000 OPN WING SPR ROD WLMT148-552H23.
NTA2000 OPN WING WING LOCK LUG248-044D24.
PIN ROLL 3/8 X 2 PLT805-249C25.
PIN ROLL 1/4 X 1 PLATED805-044C26.
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C27.
BUSHING 2 1/4 OD X 2 ID X 2 LG890-051C28.
BUSHING CYL 1 1/4 X 1 X 1890-005C29.
NTA2000 CENTER SEED HOSE BRKT248-118D30.
FLEX GUARD HOSE.594 OD X.413ID817-044C31.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C32.
RPBY 196-146D196-112D33.
WASHER LOCK SPRING 5/16 PLT804-009C34.
HHCS 5/16-18X1 1/4 GR5802-010C35.
1/4 MARKER HYD HOSE GUARD113-370D36.
NTA2000 WING SEED HOSE BRACKET248-105D37.
U-BOLT 1/2-13 X 6 1/32 X 7 1/4806-060C38.
WASHER LOCK SPRING 1/2 PLT804-015C39.
NUT HEX 1/2-13 PLT803-020C40.
NTA1300 SEED HOSE BRKT148-936D41.
CABLE TIE .19X7.25 1.75D 50LB800-112C42.
CABLE TIE .19X14.25 3DIA 50LB800-060C43.
NTA2000 INNER SEED HOSE BRKT248-106D44.
PIN HITCH 3/4 X 4 3/8805-081C45.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
08/30/12 - 19 - 148-632P
Table of Contents Part Number Index
Coulter Wing To Frame
(Applies to NTA2000D only)
19763
148-632P - 20 - 08/30/12
Table of Contents Part Number Index
Coulter Wing To Frame
(Applies to NTA2000D only)
Image No.dwg19763
NTA2000 CLT WING TOOL BAR WLMT148-468H1.
WASHER FLAT 1 1/4 SAE PLT804-039C2.
PIN ROLL 1/4 X 2 1/2 PLT805-117C3.
NTA2000 CLT WING HINGE PIN248-034D4.
WASHER FLAT 1 SAE804-029C5.
PIN ROLL 1/4 X 2 LG PL805-146C6.
NTA2000 CLT WG LINK PIN248-035D7.
NTA2000 CLT HINGE LINK OUTSIDE148-467H8.
BUSHING,1 1/2X1 1/4X3/4LG890-620C9.
CLT HINGE TOWER PIN148-857D10.
NTA2000 CLT WING FOLD TOWER148-472H11.
NTA2000 CLT MF LINK PIN248-036D12.
CYL 3.5X8X1.5 ROD (TIE ROD)810-434C13.
PIN LINCH 1/4 X 1 3/4 PLT805-126C14.
NTA2000 CLT HINGE GUIDE BOLTS248-051D15.
WASHER MACH 1.50 X 1.00 X 18GA804-061C16.
PIN HITCH 1 1/4 X 9 1/2 USBL805-313C17.
NUT HEX JAM 1 1/4-7 PLT803-032C18.
WASHER LOCK 1 1/4 SPRING PLT804-030C19.
NUT HEX 1 1/4-7 PLT803-034C20.
NTA2000 CLTR WING LOCK148-559H21.
NTA2000 CLT HINGE LINK INSIDE148-466H22.
NTA2000 MAIN FRAME WELDMENT148-462H23.
1 1/4 X 1 X 3/4 HDR BUSHING890-143C24.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
08/30/12 - 21 - 148-632P
Weight Bracket
(Applies to NTA2000D only)
Table of Contents Part Number Index
19786
148-632P - 22 - 08/30/12
Table of Contents Part Number Index
Weight Bracket
(Applies to NTA2000D only)
Image No.dwg19786
HHCS 5/8-11X2 GR5802-055C1.
WEIGHT REST BRACKET148-423D2.
WASHER FLAT 5/8 USS PLT804-019C3.
WASHER LOCK SPRING 5/8 PLT804-022C4.
NUT HEX 5/8-11 PLT803-021C5.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
S/N 1001GG -1023GGHHCS 5/8-11X2 1/2 GR5802-058C6.
S/N 1001GG -1023GGNTA2000 WEIGHT STOP BRACKET248-216D7.
08/30/12 - 23 - 148-632P
Coulter Toolbar
(Applies to NTA2000D only)
Table of Contents Part Number Index
19790
148-632P - 24 - 08/30/12
Table of Contents Part Number Index
Coulter Toolbar
(Applies to NTA2000D only)
Image No.dwg19790
4 X 4 1/4 END CAP817-155C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
NUT HEX 5/8-11 PLT803-021C3.
COULTER CLAMP BAR149-059D4.
NTA2000 CTR COULTER BAR CLAMP149-572D5.
WASHER FLAT 5/8 USS PLT804-019C6.
HHCS 5/8-11X6 1/2 GR5802-335C7.
COULTER BAR CHANNEL BRACE149-073D8.
HHCS 5/8-11X7 GR5802-262C9.
HHCS 5/8-11X8 GR5802-208C10.
U-BOLT 5/8-11 4 1/32 X 6806-105C11.
COULTER TUBE 4X4X.25 X 117.625149-566D12.
COULTER TOOL BAR TIE STRAP149-074D13.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
ShownNTA2000 WING COULTER BAR CLAMP149-571D5.
ShownCOULTER TUBE 4X4X.25 X 56149-567D12.
08/30/12 - 25 - 148-632P
Opener Toolbar
(Applies to NTA2000D only)
Table of Contents Part Number Index
19469
148-632P - 26 - 08/30/12
Table of Contents Part Number Index
Opener Toolbar
(Applies to NTA2000D only)
Image No.dwg19469
NTA2000 PIVOT FRAME WELDMENT148-429H1.
NTA2000 OPENR WING TOOL BAR LH148-442H2.
NTA2000 OPENR WING TOOL BAR RH148-443H3.
NTA2000 WING OPENR SUBFR 188MM148-564H4.
NTA2000 CTR OPENER SUBFR 188MM148-565H5.
WASHER LOCK SPRING 5/8 PLT804-022C6.
NUT HEX 5/8-11 PLT803-021C7.
U-BOLT 5/8-11 X 6 1/32 X 7 3/4806-039C8.
WASHER FLAT 5/8 USS PLT804-019C9.
HHCS 5/8-11X2 GR5802-055C10.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
SHOWNNTA2000 WING OPENR SUBFR 150MM148-475H4.
SHOWNNTA2000 CTR OPENER SUBFR 150MM148-476H5.
08/30/12 - 27 - 148-632P
Lights
(Applies to NTA2000D only)
Table of Contents Part Number Index
19475
148-632P - 28 - 08/30/12
Table of Contents Part Number Index
Lights
(Applies to NTA2000D only)
Image No.dwg19475
U-BOLT 3/8-16 X 1 17/32 X2 3/4806-047C1.
NUT HEX 3/8-16 PLT803-014C2.
WASHER LOCK SPRING 3/8 PLT804-013C3.
AG LIGHT WIRING HARNESS-25'890-317C4.
LIGHT HARNESS, 15' WISHBONE890-648C5.
NTA2000 LIGHT BAR WLMT RH148-563H6.
DUAL AG LIGHTS RH890-312C7.
SCREW HEX SELF TAP 1/4-20X3/4801-081C8.
Frame
RevisionCommentsPart DescriptionPart No.Ref.
Shown.NTA2000 LIGHT BAR WLMT LH148-562H6.
Shown.DUAL AG LIGHTS LH890-311C7.
Used only with Export light kit.EUROPEAN 7 PINS CONNECTOR MALE833-376C9.
08/30/12 - 29 - 148-632P
Box To Frame
(Applies to NTA2000D only)
Table of Contents Part Number Index
19713
148-632P - 30 - 08/30/12
Loading...