Great Plains CDA600 User Manual

Table of Contents Part Number Index

Parts Manual

Centurion Cultivator Drill

CDA600

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

34214

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2014 Printed 07/23/14 270-600P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................4

Using This Manual...............................................................4

Manual Replacement Information.......................................4

Manual Revisions................................................................4

Touch-up Paint....................................................................4

Hardware Legend................................................................5

Replacement Hardware......................................................5

Serial Numbers...................................................................5

Part Number Service Coding..............................................5

Coulters..........................................................................6

Leveling Board Assembly....................................................6

Toolbar Assembly Center Section (270-197V) &

(270-198V)....................................................................8

Toolbar Assembly LH (270-194V) & (270-195V)...............10

Toolbar Assembly RH (270-200V) & (270-201V)..............12

Track Eradicator Assembly................................................14

Dry Fertilizer................................................................16

Dry Fertilizer Delivery........................................................16

Dry Fertilizer Opener.........................................................18

Dry Fertilizer Tower Mounting............................................20

Hopper Door and Side Panels...........................................22

Screens and Box Divider...................................................24

Frame............................................................................26

Front Center Section Assembly.........................................26

Hitch to Frame...................................................................28

Hose Rail...........................................................................30

Left Wing Front Assembly.................................................32

Lights.................................................................................34

Rear Arm Assembly..........................................................36

Rear Center Section Assembly.........................................38

Rear Wing Assembly.........................................................40

Right Wing Front Assembly...............................................42

Side Board Mounting.........................................................44

Tower Mounting.................................................................46

Track Eradicator Mounting.................................................48

Wing Mounting..................................................................50

Hopper..........................................................................52

Front Side Panel Mounting................................................52

Hopper Mounting...............................................................54

Hopper Side Panels..........................................................56

Hopper Tarp Cover Assembly...........................................58

Hydraulics....................................................................60

Bout Marker Hydraulics.....................................................60

Coultivator Hydraulics.......................................................62

Fan Hydraulics..................................................................64

Fold Hydraulics..................................................................66

Gauge Hydraulics..............................................................68

Leveling Board Hydraulics.................................................70

Opener Hydraulics............................................................72

Pre-Emergence Marker Hydraulics...................................74

Track Eradicator Hydraulics...............................................76

Tractor and Tongue Hydraulics..........................................78

Transport Hydraulics.........................................................80

Valve Manifold with Fittings...............................................82

Markers.........................................................................84

Bout Markers.....................................................................84

Pre-Emergence Markers...................................................86

Metering.......................................................................88

Fan and Metering..............................................................88

Meterbox Assembly...........................................................90

Tower Assembly................................................................92

Monitor and Frame Control........................................94

Dickey John Blockage System..........................................94

Digi-Star Weight System...................................................96

Mueller Monitor.................................................................98

Openers......................................................................100

Keeton Seed Firmer........................................................100

Long Arm Opener...........................................................102

Short Arm Opener...........................................................104

Packing Wheels..........................................................106

Center Section Packing Tires..........................................106

Wing Packing Tires..........................................................108

Press Wheels.............................................................110

2" x 13" Single Press Wheel............................................110

2" x 13" Tine/Scraper Mounting.......................................112

3" x 13" Single Press Wheel............................................114

3" x 13" Tine/Scraper Mounting.......................................116

Transport Tires and Brakes......................................118

Transport Tires................................................................118

Part Number Index.....................................................120

© Copyright 2014 All rights reserved Printed 07/23/14

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

270-600P - 2 - 07/23/14

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

2

2" x 13" Single Press Wheel.......................................110

2" x 13" Tine/Scraper Mounting..................................112

3

3" x 13" Single Press Wheel.......................................114

3" x 13" Tine/Scraper Mounting..................................116

B

Bout Marker Hydraulics................................................60

Bout Markers................................................................84

C

Center Section Packing Tires.....................................106

Coultivator Hydraulics..................................................62

D

Dickey John Blockage System.....................................94

Digi-Star Weight System..............................................96

Dry Fertilizer Delivery...................................................16

Dry Fertilizer Opener....................................................18

Dry Fertilizer Tower Mounting.......................................20

F

Fan and Metering.........................................................88

Fan Hydraulics.............................................................64

Fold Hydraulics.............................................................66

Front Center Section Assembly....................................26

Front Side Panel Mounting...........................................52

O

Opener Hydraulics........................................................72

P

Pre-Emergence Marker Hydraulics..............................74

Pre-Emergence Markers..............................................86

R

Rear Arm Assembly.....................................................36

Rear Center Section Assembly....................................38

Rear Wing Assembly....................................................40

Right Wing Front Assembly..........................................42

S

Screens and Box Divider..............................................24

Short Arm Opener......................................................104

Side Board Mounting....................................................44

T

Toolbar Assembly Center Section (270-197V) &

(270-198V)...............................................................8

Toolbar Assembly LH (270-194V) & (270-195V)..........10

Toolbar Assembly RH (270-200V) & (270-201V).........12

Tower Assembly...........................................................92

Tower Mounting............................................................46

Track Eradicator Assembly...........................................14

Track Eradicator Hydraulics..........................................76

Track Eradicator Mounting............................................48

Tractor and Tongue Hydraulics.....................................78

Transport Hydraulics....................................................80

Transport Tires...........................................................118

G

Gauge Hydraulics.........................................................68

H

Hitch to Frame..............................................................28

Hopper Door and Side Panels......................................22

Hopper Mounting..........................................................54

Hopper Side Panels.....................................................56

Hopper Tarp Cover Assembly.......................................58

Hose Rail......................................................................30

K

Keeton Seed Firmer...................................................100

L

Left Wing Front Assembly............................................32

Leveling Board Assembly...............................................6

Leveling Board Hydraulics............................................70

Lights............................................................................34

Long Arm Opener.......................................................102

M

Meterbox Assembly......................................................90

Mueller Monitor............................................................98

V

Valve Manifold with Fittings..........................................82

W

Wing Mounting.............................................................50

Wing Packing Tires.....................................................108

07/23/14 - 3 - 270-600P

Table of Contents Part Number Index

270-600P - 4 - 07/23/14

Table of Contents Part Number Index

07/23/14 - 5 - 270-600P

Table of Contents Part Number Index

Leveling Board Assembly

(Applies to CDA600 only)

34188

270-600P - 6 - 07/23/14

Table of Contents Part Number Index

Leveling Board Assembly

(Applies to CDA600 only)

Image No.dwg34188

TOOLBAR LVL BRD 6M LFT WING270-042H2.
LEAF CLAMP 60X60 RHS820-464C3.
HHCS M12X1.75X110 GR8.8842-011C4.
NUT HEX LOCK M10X1.5803-408C5.
WEAR PLATE 80MM820-463C6.
RHSNB M10X1.5X35 GR8.8842-012C7.
SPRUNG LEAF 80X10807-315C8.

TOOLBAR LEVELING BOARD CENTER270-074H10.

TOOLBAR LEVELING BRD 6M WING R270-058H12.
NUT LOCK M12X1.75803-395C13.

Coulters

RevisionCommentsPart DescriptionPart No.Ref.

Includes Items 2-4, 6-8 & 13LEVELING BOARD ASSM LEFT 6M270-222K1.

Includes Items 3-8 & 10LEVELING BOARD ASSM CENTER270-223K9.

Includes Items 3-8 & 12LEVELING BOARD ASSM 6M RHT270-224K11.

07/23/14 - 7 - 270-600P

Table of Contents Part Number Index

Toolbar Assembly Center Section (270-197V) & (270-198V)

(Applies to CDA600 only)

34155

270-600P - 8 - 07/23/14

Table of Contents Part Number Index

Toolbar Assembly Center Section (270-197V) & (270-198V)

(Applies to CDA600 only)

Image No.dwg34155
NUT LOCK M12X1.75803-395C1.
CLAMP RUBELMENT 2.5270-149D2.
RUBBER ELEMENT 1.25 X 8.25816-732C3.
TOOLBAR CULT DISC FNT CENTER270-053H4.
DISC MOUNT ARM FRONT WLDMT270-043H5.
HHCS M12X1.75X50 GR10.9 FTHD802-978C6.

ShownDISC 18X1.9 CONC 1" NOTCH820-469C7.
DISC 16.5X1.59 CONC 2" NOTCH820-470C7.
DISC 18X1.9 CONC 2" NOTCH820-471C7.
AGRI HUB 98-4-117815-388C8.
NUT LOCK M22X1.5803-398C9.
WASHER FLAT M22 PLT804-248C10.
WASHER SPRING LOCK M12 PLT804-159C11.
HHCS M12X1.25X20 GR8.8802-976C12.
TOOLBAR CULT DISC REAR CENTER270-054H13.
DISC MOUNT ARM REAR WLDMT270-055H14.

Coulters

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 9 - 270-600P

Table of Contents Part Number Index

Toolbar Assembly LH (270-194V) & (270-195V)

(Applies to CDA600 only)

34154

270-600P - 10 - 07/23/14

Table of Contents Part Number Index

Toolbar Assembly LH (270-194V) & (270-195V)

(Applies to CDA600 only)

Image No.dwg34154
NUT LOCK M12X1.75803-395C1.
CLAMP RUBELMENT 2.5270-149D2.
RUBBER ELEMENT 1.25 X 8.25816-732C3.
TOOLBAR 6M WING LFT FRNT270-093H4.
DISC MOUNT ARM FRONT WLDMT270-043H5.
HHCS M12X1.75X50 GR10.9 FTHD802-978C6.
LOCK NUT M22X1.5803-398C7.
WASHER FLAT M22 PLT804-248C8.
AGRI HUB 98-4-117815-388C9.

ShownDISC 18X1.9 CONC 1" NOTCH820-469C10.
DISC 18X1.9 CONC 2" NOTCH820-471C10.
WASHER SPRING LOCK M12 PLT804-159C11.
HHCS M12X1.25X20 GR8.8802-976C12.
TOOLBAR 6M WING LFT REAR270-094H13.
DISC MOUNT ARM REAR WLDMT270-055H14.
DISC 16.5X1.59 CONC 2" NOTCH820-470C15.

Coulters

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 11 - 270-600P

Table of Contents Part Number Index

Toolbar Assembly RH (270-200V) & (270-201V)

(Applies to CDA600 only)

34186

270-600P - 12 - 07/23/14

Table of Contents Part Number Index

Toolbar Assembly RH (270-200V) & (270-201V)

(Applies to CDA600 only)

Image No.dwg34186
NUT LOCK M12X1.75803-395C1.
CLAMP RUBELMENT 2.5270-149D2.
RUBBER ELEMENT 1.25 X 8.25816-732C3.
TOOLBAR 6M WING RT FRNT270-075H4.
DISC MOUNT ARM FRONT WLDMT270-043H5.
HHCS M12X1.75X50 GR10.9 FTHD802-978C6.

ShownDISC 18X1.9 CONC 1" NOTCH820-469C7.
DISC 18X1.9 CONC 2" NOTCH820-471C7.
AGRI HUB 98-4-117815-388C8.
NUT LOCK M22X1.5803-398C9.
WASHER FLAT M22 PLT804-248C10.
WASHER SPRING LOCK M12 PLT804-159C11.
HHCS M12X1.25X20 GR8.8802-976C12.
TOOLBAR 6M WING RT REAR270-059H13.
DISC MOUNT ARM REAR WLDMT270-055H14.
DISC 16.5X1.59 CONC 2" NOTCH820-470C15.

Coulters

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 13 - 270-600P

Table of Contents Part Number Index

Track Eradicator Assembly

(Applies to CDA600 only)

34187

270-600P - 14 - 07/23/14

Table of Contents Part Number Index

Track Eradicator Assembly

(Applies to CDA600 only)

Image No.dwg34187
BRKT TRK ERADICTR WLDMT270-001H1.
HHCS M16X2.0X80 GR10.9802-948C2.
NUT HEX NYLOCK M16X2.00 GRB PT803-282C3.
ARM TRACKERADICATOR270-002D4.
SPRING EXT 2.75 X 12 X 0.5WIRE807-317C5.
TUBE PIVOT .875ODX.120WLX2.20L270-010D6.
RETAINER SPRING270-009D7.
BREAKAWAY WLDMT270-002H8.
SHANK TRACKERADICATOR270-008D9.
CIRCLE COTTER52X2.6800-430C10.
PIN ?16X73606-053D11.
NUT LOCK M12X1.75803-395C12.
ERADICATOR POINT820-490C13.
PLOW M12X1.75X60 GR12.9 SPTHD842-194C14.

Coulters

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 15 - 270-600P

Dry Fertilizer Delivery

(Applies to CDA600 only)

Table of Contents Part Number Index

36344

270-600P - 16 - 07/23/14

Table of Contents Part Number Index

Dry Fertilizer Delivery

(Applies to CDA600 only)

Image No.dwg36344
TOOLBOX ASM270-176K1.
NUT HEX NYLOCK M12X1.75 PLT803-281C2.
WASHER FLAT M12 PLT804-246C3.
HHCS M12X1.75X80 GR8.8 PLT802-486C4.
SILICON 35YR CLEAR 10 OZ890-179C5.
PLT HOSE SUPPORT270-536D6.
NUT HEX NYLOCK M10X1.5 PLT803-280C7.
YP FAN MOUNT WLDMNT401-203H8.
HHCS M10X1.5X30 GR8.8802-609C9.
SCREW HEX SELF TAP 1/4-20X3/4801-081C10.
FLEX GUARDHOSE.594 OD X.413ID817-044C11.

DECAL FAN BAFFLE INDEX RH848-248C13.
HHCS 1/4-20X5/8 GR5802-078C14.
WASHER FLAT 1/4 SAE PLT804-007C15.
CRARY FAN SHUTTER LH403-244H16.
HFS 10-24 X 3/4 PLT801-155C17.
CRARY FAN SHUTTER DISK411-030D18.
NUT HEX NYLOCK 10-24 PLT803-268C19.
SCREW HEX 5/16-12X3/4 THD FRM801-025C20.
6" AIR DIVIDER Y270-307H21.
TUBE 6" 40DEG Y AIRBOX LEG270-682D22.
6 FAN HOUSING LH SIDE2332023.
HH3/8R2 191 3/4FJIC841-274C24.
TEE 1/4MBSPP 1/4FBSPP 1/4MBSPP841-810C25.
NUT HEX NYLOCK 1/2-13803-147C26.
PARKER F-11 FAN MOTOR810-556C27.
CRARY FAN MOTOR B MOUNT PLATE2331728.
HUB/MOTORPLATE SEAL (2B)2390729.
WASHER FLAT 3/8 SAE PLT804-012C30.
HHCS 3/8-16X1 1/4 GR5802-079C31.
6 FAN HOUSING LH SIDE2332032.
13 FAN IMPELLER1708933.
6 FAN HOUSING RH SIDE2112134.
BUSHING, JAX 20 MM890-891C35.
BRKT FAN SENSOR MOUNT MUELLER270-458D36.
IND.SENSOR M12X60833-581C37.
HFSS 1/4-20X1 GR5802-375C38.
CLAMP WRM DRV #96SS (4.75-6.5)800-151C39.
HOSE 6.0 ID DUCTING X 3.3 FT816-409C40.
HHCS M10X1.5X45 GR8.8842-025C41.
WASHER FLAT M10 PLT804-162C42.
METER AD SINGLE ROLLER ASSY270-129S43.

WASHER SPRING LOCK M8 PLT804-157C45.
HHCS M8X1.25X18 GR8.8842-019C46.
OUTLET 4" FOR 6" RND AIRBOX837-029C47.
AIRBOX 6" ROUND WELDMENT270-288H48.
SCREW Ø6X25 PAN HEAD801-245C49.
INLET CONE 6" ROUND AIRBOX837-028C50.

Dry Fertilizer

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 10 & 23-37FAN6" ASM W/BSP270-174K12.

Refer to Meter Assembly for

breakdown

Includes items 47-50AIRBOX ROUND 6" INLET 4" OUT270-287L44.

07/23/14 - 17 - 270-600P

Dry Fertilizer Opener

(Applies to CDA600 only)

Table of Contents Part Number Index

36357

270-600P - 18 - 07/23/14

Table of Contents Part Number Index

Dry Fertilizer Opener

(Applies to CDA600 only)

Image No.dwg36357
NUT HEX NYLOCK M12X1.75 PLT803-281C1.
BRACKET L SPRING MOUNT270-681D2.
RHSNB M12X1.75X90 GR8.8802-991C3.
HHCS M12X1.75X40 GR8.8802-977C4.
SPRING SPIRAL TORSION 1.5X.375807-337C5.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C6.
WASHER MACH 1.19 X .63 X 18GA804-040C7.
DD BRG FLANGE DUST COVER107-111D8.
DD W/205 BRG-PLD FLNG-4MM107-138S9.
FERTILIZER OPENER ARM270-295H10.
RHSNB M10X1.5X25 GR 8.8842-061C11.
D.D. SLOTTED SCRAPER107-113D12.
WASHER FLAT M10 PLT804-162C13.
NUT HEX NYLOCK M10X1.5 PLT803-280C14.

Dry Fertilizer

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 19 - 270-600P

Table of Contents Part Number Index

Dry Fertilizer Tower Mounting

(Applies to CDA600 only)

36351

270-600P - 20 - 07/23/14

Table of Contents Part Number Index

Dry Fertilizer Tower Mounting

(Applies to CDA600 only)

Image No.dwg36351
HOSE CLAMP 4.53 - 4.84 T BOLT800-426C1.
PVC SEED HOSE 4 ID X 28 LONG270-671D2.
TOWER24 ROW MODULAR W/BLOCKAG270-191K3.

TOWER18 ROW MODULAR W/BLOCKAG270-205K3.

SCREW PIN ANCHOR SHACKLE890-178C4.
U-BOLT M12X1.75X102X140806-233C5.
PVC SEED HOSE 4 ID X 7 LONG270-672D6.

WASHER SPRING LOCK M12 PLT804-159C8.
NUT HEX M12X1.75 PLT803-446C9.
3 TOWER MOUNT270-292H10.
NUT HEX M16X2 PLT803-423C11.
WASHER FLAT M16 PLT804-247C12.
U-BOLT M16-2.00 X 102 X 140806-226C13.
PVC SEED HOSE 4 ID X 41 LONG270-673D14.
HHCS M10X1.5X35 PLT802-628C15.
STAUFF CLAMP-STACK BOLT M8841-666C16.
STAUFF CLAMP-TOP PLATE841-660C17.
STAUFF CLAMP-LOCK CLIP841-665C18.
STAUFF CLAMP-1/2" SINGLE841-677C19.
HHCS M16X2X45 GR8.8802-982C20.
NUT HEX NYLOCK M10X1.5 PLT803-280C21.
HHCS M10X1.5X60 GR8.8 FTHD842-188C22.
WASHER FLAT M10 PLT804-162C23.
NUT HEX M10X1.5 PLT803-279C24.
LINEAR ACTUATOR 12V 100MM833-587C25.
AIR-SEED DIVERTERY-PIPE270-291H26.
PVC SEED HOSE 4 ID X 4 LONG270-588D27.
HHCS M6X1X35 GR8.8802-952C28.
PLATE SLIDE 4" DIVERTER270-341D29.
VALVE 4" DIVERTER WELDMENT270-052H30.
PLATE PLASTIC 2-4" OUTLET270-340D31.
PLATE WELD CLAMP 4" DIVERTER270-050H32.
NUT HEX NYLOCK M6X1803-386C33.
QUIK RELEASE PIN W/LANYARD891-281C34.
HHCS M6X1X30 GR8.8802-954C35.

Dry Fertilizer

RevisionCommentsPart DescriptionPart No.Ref.

Refer to Tower Assembly for

breakdown

Refer to Tower Assembly for

breakdown

Includes item 28-35VALVE 4" DIVERTER CLAMP-ON270-123S7.

07/23/14 - 21 - 270-600P

Table of Contents Part Number Index

Hopper Door and Side Panels

(Applies to CDA600 only)

36335

270-600P - 22 - 07/23/14

Table of Contents Part Number Index

Hopper Door and Side Panels

(Applies to CDA600 only)

Image No.dwg36335
HSBHCS M8X1.25X35 SS802-969C1.
NUT HEX NYLOCK M8X1.25 PLT803-278C2.
PANEL SIDE REAR RIGHT817-918C3.
STRAP 1 1/4 WIDE X 59 LONG270-041D4.
SOLID AND SHTMETEL HOPPER ASY270-003H5.
HSBHCS M8X1.25X25 SS802-968C6.
PANEL REAR COVER817-919C7.
SIDE PANEL MOUNT BRACKET270-006H8.
PANEL SIDE REAR LEFT817-916C9.
PULL HANDLE 5 3/16 CENTER817-940C10.
PLATE SIDE PANEL MOUNT270-037D11.
DRAW LATCH, RUBBER 4 9/16816-738C12.
HHCS M5X.80X30 GR8.8802-972C13.
NUT HEX NYLOCK M5X.8803-390C14.
GASKET 65.365 LONG270-614D15.
WASHER FENDER M8 X 24804-243C16.
BRACKET LOWER SIDE PANEL270-543D17.
STRAP 1 X 5.50 LONG270-039D18.
BRACKET SIDE PANELMOUNT270-038D19.
GRIP HANDLE .75 ID X 5.18 LONG816-821C20.
WASHER FENDER M5 X 15804-245C21.
DOOR DUALPRODUCT HOPPER270-281H22.
HHCS M8X1.25X25 GR8.8 ZNYCR802-714C23.
HHCS M8X1.25X18 GR8.8842-019C24.
HINGE 5/16 PIN 2 HOLE MNT270-280H25.
PIN COTTER3/32 X 1/2805-307C26.
PIN HTCH .75X1.88 USBL805-006C27.

Dry Fertilizer

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 23 - 270-600P

Table of Contents Part Number Index

Screens and Box Divider

(Applies to CDA600 only)

36337

270-600P - 24 - 07/23/14

Table of Contents Part Number Index

Screens and Box Divider

(Applies to CDA600 only)

Image No.dwg36337
HHCS M10X1.5X25 GR8.8802-997C1.
NUT HEX NYLOCK M10X1.5 PLT803-280C2.
WALKBOARD24 X 30270-279H3.
HHCS M8X1.25X40 GR8.8842-206C4.
TUBE RND 16MM X 10MM X 19MM LG270-068D5.
NUT HEX NYLOCK 5/16-24803-270C6.
HOPPER SCREEN 38.5 X 43.5270-285H7.
HHCS M10X1.5X50 GR8.8802-937C8.
HANDLE HOPPER DIVIDER270-627D9.
HHCS M8X1.25X25 GR8.8 ZNYCR802-714C10.
BRACKET BENT HOPPER ADJ MOUNT270-623D11.
HANDLE GRAB 4 1/8WIDE1 1/2TALL817-936C12.
WASHER LOCK SPRING 1/4 PLT804-006C13.
HHCS 1/4-20X5/8 GR5802-078C14.
HHCS M6X1X16 GR8.8 PLT802-741C15.
PLATE 5' MAGNETIC WEAR270-364D16.
NUT HEX NYLOCK M6X1803-386C17.
STRAP 1X14 W/ 3 HOLES270-625D18.
STRAP 11LONG X 1 WIDE 3/16 THK270-622D19.
BRACKET L 2.5" W/SLOTS270-624D20.
STRAP .75 X 2 1 HOLE270-621D21.
HOPPER DIVIDER FLAP891-448C22.
HOPPER SCREEN 26.5 X 43.5270-286H23.

Dry Fertilizer

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 25 - 270-600P

Table of Contents Part Number Index

Front Center Section Assembly

(Applies to CDA600 only)

34149

270-600P - 26 - 07/23/14

Table of Contents Part Number Index

Front Center Section Assembly

(Applies to CDA600 only)

Image No.dwg34149
HHCS M12X1.75X60 GR8.8802-979C1.
WASHER FLAT M12 - OD36MM804-263C2.
PLATE BENT CULT SECTION DEPTH270-438D3.
HHCS M12X1.75X30 GR8.8802-458C4.
STANDOFF 1 OD X 1 X 5/8270-439D5.
NUT HEX NYLOCK M12X1.75 PLT803-281C6.
FRAME CENTER WLDMT270-117H7.
PIN 25MM X 53MM FIXED270-106H8.
ROLL PIN 8MM X 50MM PLT805-452C9.
LINK ARM WLDMT STRAIGHT270-091H10.
NUT HEX NYLOCK M12X1.75 PLT803-281C11.
CULT DISC ASM CENTER FRONT270-197V12.

CULT DISC ASM CENTER REAR270-198V13.

CYL REP 70MMX200MMX36MM MEMORY810-777C14.

PIN 25MM X 100MM NON-ROTATE270-153H15.
PIN 25MM X 65MM NON-ROTATE270-010H16.
CYL REP 60MM X 125MM X 32MM810-756C17.

PIN 25MM X 100MM NON-ROTATE270-153H18.
TOOLBAR LEVELING BOARD CENTER270-074H19.
HHCS M16X2.0X35 GR8.8802-966C20.
MOUNT TOOLBARWLDMT270-057H21.
HHCS M16X2X30 GR8.8802-981C22.
HHCS M16X1.5X50 GR8.8802-946C23.
MOUNT TOOLBARPLASTIC270-001D24.
RETAINER BRG WLDMT270-092H25.
SCRAPER TIRE270-240D26.
WALKBOARD270-047H27.
WASHER FLAT M12 PLT804-246C28.
HHCS M12X1.75X40 GR8.8802-977C29.
BRACKET TIRE SCRAPER RHT270-449D30.
MOUNT TIRE SCRAPER CENTER270-448D31.
BRACKET TIRE SCRAPER270-440D32.
U-BOLT M16-2.00 X 102 X 140806-226C33.
WASHER SPRING LOCK M16 PLT804-187C34.
NUT HEX NYLOCK M16X2.00 GRB PT803-282C35.
HHCS M16X2X25 GR8.8842-087C36.
WASHER 3/8BSPP BONDED841-793C37.
PLUG 3/8MBSPP HOLLOW HEX841-786C38.
AD 3/8MBSPP 3/8MBSPP841-801C39.
EL ADJ 3/8MBSPP 3/8MBSPP841-804C40.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Refer to Coulter Toolbar Assembly for

breakdown

Refer to Coulter Toolbar Assembly for

breakdown

Referto Hydraulic Cylinder(810-777C)

for breakdown

Referto Hydraulic Cylinder(810-756C)

for breadown

07/23/14 - 27 - 270-600P

Hitch to Frame

(Applies to CDA600 only)

Table of Contents Part Number Index

34136

270-600P - 28 - 07/23/14

Hitch to Frame

(Applies to CDA600 only)

Image No.dwg34136
HHCS M10X1.5X70 GR8.8802-975C1.
BUSH SPRUNG - Ø45XØ36X40827-129C2.
LINKAGE PIN GREASABLE603-511D3.
NUT HEX NYLOCK M10X1.5 PLT803-280C4.
LINKAGE ADAPTOR603-001H5.
WASHER FLAT M45 PLT804-268C6.
NUT SLOTTEDM45X3803-437C7.
PIN SPLIT Ø5X75805-467C8.
BALL CAT 3 LOWER ?37827-113C9.
LYNCH PIN CAT 3805-468C10.
HITCH CROSSBAR - CAT 3603-084H11.
PARK STAND 70SQIN270-051H12.
PIN Ø20X115270-539D13.
LYNCH PIN CAT 2805-460C14.
1/8" BSP GREASE NIPPLE 45?800-437C15.
HHCS M20X2.50X110 GR8.8802-965C16.
NUT HEX NYLOCK M20X2.5803-393C17.
BOLT M45X3X275603-145H18.
SWIVEL WLDMT270-097H19.
ROLL PIN 8MM X 50MM PLT805-452C20.
TOWERHYD HOSE HOLDER270-056H21.
HHCS M8X1.25X15 GR8.8802-974C22.
NUT HEX NYLOCK M8X1.25 PLT803-278C23.
HITCH 94"270-048H24.
STEP BOLT-ON270-096H25.
HHCS M16X2X50 GR8.8842-033C26.
NUT HEX NYLOCK M16X2.00 GRB PT803-282C27.
HHCS M20X2.50X190 GR12.9802-964C28.
FRAME CENTER WLDMT270-117H29.
HITCH CROSSBAR - CAT 4603-085H30.
BUSH Ø65XØ45X5603-530D31.
AD 1/4MBSPP BLKHD W/LN841-789C32.
AD 1/2MSBPP BLKHD W/LN841-787C33.

Table of Contents Part Number Index

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 29 - 270-600P

Hose Rail

(Applies to CDA600 only)

Table of Contents Part Number Index

34853

270-600P - 30 - 07/23/14

Hose Rail

(Applies to CDA600 only)

Image No.dwg34853
RAIL HOSE MOUNTING ASM LFT270-212H1.
RAIL HOSE MOUNTING ASM RHT270-213H2.
CROSSBAR270-535D3.
HHCS M16X2X45 GR8.8802-982C4.
NUT HEX NYLOCK M12X1.75 PLT803-281C5.
NUT HEX M16X2.00 NYLON INSERT803-282C6.
WASHER SPRING LOCK M16 PLT804-187C7.
HHCS M16X2X25 GR8.8842-087C8.
HHCS M12X1.25X25 GR8.8842-091C9.

Table of Contents Part Number Index

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 31 - 270-600P

Table of Contents Part Number Index

Left Wing Front Assembly

(Applies to CDA600 only)

34138

270-600P - 32 - 07/23/14

Table of Contents Part Number Index

Left Wing Front Assembly

(Applies to CDA600 only)

Image No.dwg34138
WING 6M LFT WLDMT270-104H1.
HHCS M16X2X45 GR8.8802-982C2.
NUT HEX M16X2.00 NYLON INSERT803-282C3.
TOOLBAR LVL BRD 6M LFT WING270-042H4.
MOUNT TOOLBARPLASTIC270-001D5.
RETAINER BRG WLDMT270-092H6.
MOUNT TOOLBARWLDMT270-057H7.
HHCS M16X2X30 GR8.8802-981C8.
BRKT TOOLBAR2.5 OFFSET WLDMT270-045H9.
CYL 50MM X 125MM X 30MM810-758C10.
ROLL PIN 8MM X 50MM PLT805-452C11.
PIN 25MM X 65MM NON-ROTATE270-010H12.
PIN 25MM X 53MM FIXED270-106H13.
CULT TLBR ASSM 6M LFT REAR270-195V14.

PIN 25MM X 90MM NON-ROTATE270-107H15.
ARM LINK WLEMT270-044H16.
CYL REP 50.8MM X 200MM X 30MM810-762C17.
CYL REP 60MM X 200MM X 32MM810-761C18.
PIN 25MM X 91MM SQ HEAD270-009H19.
CULT TLBR ASSM 6M LFT FRNT270-194V20.

HHCS M16X2X70 GR8.8802-983C21.
PLT DISC GANG MNT 2.5 OFFST IN270-046H22.
WASHER 3/8BSPP BONDED841-793C23.
AD 3/8MBSPP 3/8MBSPP841-801C24.
PLUG 3/8BSPP HOLLOW HEX841-786C25.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Refer to Coulter Toolbar Assembly for

breakdown

Refer to Coulter Toolbar Assembly for

breakdown

07/23/14 - 33 - 270-600P

Lights

(Applies to CDA600 only)

Table of Contents Part Number Index

34150

270-600P - 34 - 07/23/14

Lights

(Applies to CDA600 only)

Image No.dwg34150
MARKER TUBE WELDMENT RH270-116H1.
NUT HEX NYLOCK M6X1803-386C2.
HHCS M6X1X35 GR8.8802-952C3.
PIVOTSPACER270-362D4.
MARKER TUBE WELDMENT LH270-115H5.
NUT HEX NYLOCK M8X1.25 PLT803-278C6.
HHCS M8X1.25X20 GR8.8802-314C7.
LIGHT BOARD FR/RL833-569C8.
LIGHT UNIT FRONT C/W LEAD833-570C9.
WASHER LOCK M6 PLT804-226C10.
HHCS M6X1X30 GR8.8802-954C11.
NUT HEX M10X1.5 PLT803-279C12.
MOUNT SIGN B-OUT 1 1/2" TUBE270-524D13.
U-BOLT M10X1.5X66X35806-234C14.
U-BOLT M16-2.00 X 64 X 100806-230C15.
BEACON MOUNT PLATE270-465D16.
NUT HEX NYLOCK M16X2.00 GRB PT803-282C17.
LIGHT ASMP1555918.
FLASHING BECONP1556719.
REFLECTOR- REDP0579620.
DECAL MOUNT - SPEED102064421.
SIGN - SPEED LIMITP1683822.
MARKER BOARD MNT,REAR RH270-184H23.
MARKER BOARD MNT,REAR LH270-186H24.
NUT HEX NYLOCK M5X.8803-390C25.
HSHCS M5X.8X20 304 SS802-957C26.
PLATE 30MM AND 9MM HOLES270-579D27.
HHCS M8X1.25X70 GR 8.8802-730C28.
NUT HEX 8MM STD PITCH803-262C29.

Table of Contents Part Number Index

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 35 - 270-600P

Rear Arm Assembly

(Applies to CDA600 only)

Table of Contents Part Number Index

34911

270-600P - 36 - 07/23/14

Rear Arm Assembly

(Applies to CDA600 only)

Image No.dwg34911
U-BOLT M16-2.00 X 102 X 140806-226C1.
ARM REAR ACCESSORY WLDMNT270-014H2.
NUT HEX M16X2.00 NYLON INSERT803-282C3.
U-BOLT M16-2.00 X 64 X 100806-230C4.
CALIBRATION BAGMNT270-155H5.
TUBE 2.5SQ X .188WL X 98.43LG270-366D6.

Table of Contents Part Number Index

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 37 - 270-600P

Table of Contents Part Number Index

Rear Center Section Assembly

(Applies to CDA600 only)

34800

270-600P - 38 - 07/23/14

Table of Contents Part Number Index

Rear Center Section Assembly

(Applies to CDA600 only)

Image No.dwg34800
ARM ROW UNIT LIFT WLDMT270-035H1.
PIN 32MM X 51MM270-154H2.
PLT TRUNCYL MNT 32MM270-238D3.
PIN 32MM X 146MM W/ 11MM HOLE270-239D4.
KEEPER PIN270-425D5.
GREASE ZERK STRAIGHT 1/4BSP800-425C6.
HHCS M10X1.5X65 GR8.8802-950C7.
NUT HEX NYLOCK M10X1.5 PLT803-280C8.
NUT LOCK M12X1.75803-395C9.
NUT LOCK M22X2.5803-399C10.
WASHER FLAT M20 PLT804-244C11.
CYL 65X175X40 ROD TRUNNION810-869C12.
HHCS M22X2.5X130 GR10.9842-003C13.
HSFCHCS M12X1.75X25 GR10.9842-005C14.
BUSHING 40 X 32 X 25 CONNEX891-288C15.
ROCKSHAFT BRG SUB ASSY196-145V16.
ROCKSHAFT WLDMT270-031H17.
PIN 40MM X 70MM NON-ROTATE270-152H18.
STOP CYL 9" ASSM270-253V19.
PIN 40MM X 220MM270-418D20.
SPACER 2.50 OD X 1.63 ID X 2.0270-471D21.
HHCS M10X1.5X70 GR8.8802-975C22.
WASHER LOCK M24 PLT804-250C23.
ROLL PIN 8MM X 50MM PLT805-452C24.
CYL 100X300X50 ROD810-776C25.
HHCS M24X3X100 GR10.9842-004C26.
WASHER 1.875ODX1.505ID-078 PLT804-068C27.
HHCS M16X2X70 GR8.8802-983C28.
WASHER 1/2BSPP BONDED841-792C29.
AD 1/2MBSPP 1/2MBSPP841-800C30.
VLV BALL 1/2FBSP BLOCK810-812C31.
AD 1/2MBSPP 1/2FBSPP SWIVEL841-805C32.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 39 - 270-600P

Rear Wing Assembly

(Applies to CDA600 only)

Table of Contents Part Number Index

34144

270-600P - 40 - 07/23/14

Table of Contents Part Number Index

Rear Wing Assembly

(Applies to CDA600 only)

Image No.dwg34144

HHCS M20X2.5X60 GR10.9802-988C2.
NUT LOCK M20X2.5803-397C3.

SCRAPER TIRE270-240D5.
NUT HEX NYLOCK M12X1.75 PLT803-281C6.
WASHER FLAT M12 PLT804-246C7.
HHCS M12X1.75X40 GR8.8802-977C8.
HHCS M10X1.5X65 GR8.8802-950C9.
PIN 32MM X 95MM W/11MM HOLE270-255D10.
NUT HEX NYLOCK M10X1.5 PLT803-280C11.
HHCS M16X2.0X35 GR8.8802-966C12.
WASHER SPRING LOCK M16 PLT804-187C13.
HHCS M12X1.75X35 GR8.8802-613C14.
ARM ROW LIFT LFT WING 6M270-038H15.

ARM SEED HOSE SUPPORT RT270-122H16.
PIN 32MM X 146MM W/ 11MM HOLE270-239D17.
WASHER FLAT M22 PLT804-248C18.
HHCS M22X2.5X100 GR10.9802-990C19.
NUT LOCK M22X2.5803-399C20.
TOOLBAR CULT DRILL LFT WING270-080H21.
PLT TRUNCYL MNT 32MM270-238D22.
CYL 65X175X40 ROD TRUNNION810-869C23.

GREASE ZERK STRAGHT 1/8-28 BSP800-432C24.
BUSHING 2 X 32MM X 1.50 XHOLE270-043D25.
WASHER 1/2BSPP BONDED841-792C26.
AD 1/2MBSPP 1/2MBSPP841-800C27.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Shown LHWING 6M LFT WLDMT270-104H1.

RHWING 6M RHT WLDMT270-109H1.

Shown LHPACKER 6M LFT WING WLDMT270-105H4.

RHPACKER 6M RHT WING WLDMT270-108H4.

ShownARM SEED HOSE SUPPORT LFT270-147D16.

Referto Hydraulic Cylinder(810-869C)

for breackdown

07/23/14 - 41 - 270-600P

Table of Contents Part Number Index

Right Wing Front Assembly

(Applies to CDA600 only)

34396

270-600P - 42 - 07/23/14

Table of Contents Part Number Index

Right Wing Front Assembly

(Applies to CDA600 only)

Image No.dwg34396
WING 6M RHT WLDMT270-109H1.
HHCS M16X2X45 GR8.8802-982C2.
PLT POSITION INDICATOR270-266D3.
HHCS M12X1.25X20 GR8.8802-976C4.
CUL TLBR ASSM 6M RHT FRNT270-200V5.

HHCS M16X2X30 GR8.8802-981C6.
MOUNT TOOLBARWLDMT270-057H7.
NUT HEX M16X2.00 NYLON INSERT803-282C8.
RETAINER BRG WLDMT270-092H9.
TOOLBAR LEVELING BRD 6M WING R270-058H10.
MOUNT TOOLBARPLASTIC270-001D11.
NUT HEX NYLOCK M12X1.75 PLT803-281C12.
ARM INDICATOR270-265D13.
HHCS M12X1.75X35 GR8.8802-613C14.
PIN 25MM X 100MM NON-ROTATE270-153H15.
ROLL PIN 8MM X 50MM PLT805-452C16.
CYL 50MM X 125MM X 30MM810-758C17.
CULT TLBR ASSM 6M RHT REAR270-201V18.

BRKT TOOLBAR2.5 OFFSET WLDMT270-045H19.
BRACKET TOOLBAR END270-037H20.
CYL REP 60MM X 200MM X 32MM810-761C21.
PIN 25MM X 90MM NON-ROTATE270-107H22.
ARM LINK WLEMT270-044H23.
PIN 25MM X 91MM SQ HEAD270-009H24.
PIN 25MM X 53MM FIXED270-106H25.
CYL REP 50.8MM X 200MM X 30MM810-762C26.
ARM DEPTH INDICATOR270-268D27.
WASHER 3/8BSPP BONDED841-793C28.
AD 3/8MBSPP 3/8MBSPP841-801C29.
PLUG 3/8BSPP HOLLOW HEX841-786C30.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Refer to ToolbarAssembly RH

(270-200V) & (200-201V) for
breakdown

Refer to ToolbarAssembly RH

(270-200V) & (200-201V) for
breakdown

07/23/14 - 43 - 270-600P

Side Board Mounting

(Applies to CDA600 only)

Table of Contents Part Number Index

34145

270-600P - 44 - 07/23/14

Table of Contents Part Number Index

Side Board Mounting

(Applies to CDA600 only)

Image No.dwg34145
NUT HEX M16X2.00 NYLON INSERT803-282C1.
HHCS M16X2.0X40 GR8.8802-703C2.
NUT HEX M16X2.00X8MM THK PLT803-283C3.
SLEEVE .66ID X 1.50OD X 1.25270-578D4.
ARM SIDEBOARD FORMED LH270-573D5.
WASHER FLAT M16 - OD48MM804-264C6.
HHCS M16X2.0X65 GR8.8802-891C7.
NUT HEX NYLOCK M12X1.75 PLT803-281C8.
SIDE BOARD EXTENSION270-249D9.
SIDEBOARD 4 HOLE MOUNT270-577D10.
HHCS M12X1.75X30 GR8.8802-458C11.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 45 - 270-600P

Tower Mounting

(Applies to CDA600 only)

Table of Contents Part Number Index

34148

270-600P - 46 - 07/23/14

Tower Mounting

(Applies to CDA600 only)

Image No.dwg34148
FRAME CENTER WLDMT270-117H1.
NUT HEX M16X PLT803-423C2.
WASHER FLAT M16 PLT804-247C3.
HHCS M16X2X45 GR8.8802-982C4.
TOWERBRACKET270-041H5.
U-BOLT M12X1.75X102X140806-233C6.
TOWER24 ROW MODULAR W/BLOCKAG270-191K7.

TOWER18 ROW MODULAR W/BLOCKAG270-205K7.

WASHER SPRING LOCK M12 PLT804-159C8.
NUT HEX M12X1.75 PLT803-446C9.

U-BOLT M16-2.00 X 102 X 140806-226C11.
HHCS M6X1X35 GR8.8802-952C12.
HHCS M6X1X30 GR8.8802-954C13.
PLATE SLIDE 4" DIVERTER270-341D14.
QUIK RELEASE PIN W/LANYARD891-281C15.
VALVE 4" DIVERTER WELDMENT270-052H16.
PLATE PLASTIC 2-4" OUTLET270-340D17.
PLATE WELD CLAMP 4" DIVERTER270-050H18.
NUT HEX NYLOCK M6X1803-386C19.
STAUFF CLAMP-1/2" SINGLE841-677C20.
STAUFF CLAMP-STACK BOLT M8841-666C21.
STAUFF CLAMP-LOCK CLIP841-665C22.
STAUFF CLAMP-TOP PLATE841-660C23.
HOSE CLAMP 4.53 - 4.84 T BOLT800-426C24.
PVC SEED HOSE 4 ID X 4 LONG270-588D25.

Table of Contents Part Number Index

Refer to Tower Assembly for

breakdown

Refer to Tower Assembly for

breakdown

Includes items 12-19VALVE 4" DIVERTER CLAMP-ON270-123S10.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 47 - 270-600P

Table of Contents Part Number Index

Track Eradicator Mounting

(Applies to CDA600 only)

34387

270-600P - 48 - 07/23/14

Table of Contents Part Number Index

Track Eradicator Mounting

(Applies to CDA600 only)

Image No.dwg34387

U-BOLT M16-2.00 X 102 X 140806-226C2.
CYL LUG WLDMT270-007H3.
PIN 25MM X 91MM SQ HEAD270-009H4.
NUT HEX M16X2.00 NYLON INSERT803-282C5.
ARM TRCK ERAD TOOLBAR MNT270-047D6.
CYL 50MMX150MMX30MM810-759C7.
ROLL PIN 8MM X 50MM PLT805-452C8.
PIN 25MM X 65MM NON-ROTATE270-010H9.
BUSHING 40X32X15MM HARD SPLT891-270C10.
NUT HEX NYLOCK M10X1.5 PLT803-280C11.
PIN 32MM X 95MM270-051D12.
HHCS M10X1.5X65 GR8.8802-950C13.

HHCS M16X2X70 GR8.8802-983C15.
TRACK ERADICATORASM270-026K16.

U-BOLT M16-2.00 X 77 X 115806-225C17.
HHCS M16X2X45 GR8.8802-982C18.
WASHER 1/4BSPP BONDED841-794C19.
AD 1/4MBSPP 1/4MBSPP841-802C20.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Shown. LHWING 6M LFT WLDMT270-104H1.

RHWING 6M RHT WLDMT270-109H1.

Shown. LHTOOLBAR TRK ERADICATOR LFT WEL270-015H14.

RHTOOLBAR TRK ERADICATOR RHT270-008H14.

Refer to Track Eradicator (270-026K)

for breakdown

07/23/14 - 49 - 270-600P

Wing Mounting

(Applies to CDA600 only)

Table of Contents Part Number Index

34137

270-600P - 50 - 07/23/14

Wing Mounting

(Applies to CDA600 only)

Image No.dwg34137
FRAME CENTER WLDMT270-117H1.
GREASE ZERK STRAGHT 1/8-28 BSP800-432C2.
PIN 40 X 167 W/9MM CROSS HOLE270-247D3.
WASHER SPRING LOCK M10 PLT804-158C4.
NUT HEX MYLOCK M10X1.5 PLT803-280C5.
WING 6M LFT WLDMT270-104H6.
HHCS M10X1.5X70 GR8.8802-975C7.
PIN 40MM X 200MM LONG270-417D8.
PACKER 6M LFT WING WLDMT270-105H9.
CYL 100 X 50 X 851 STROKE810-774C10.

PACKER 6M RHT WING WLDMT270-108H11.
WING 6M RHT WLDMT270-109H12.
PIN 40MM X 210MM W/11MM HOLES270-422D13.
LOCK FOLD CYL WLDMT270-142H14.
HHCS M10X1.5X35 PLT802-628C15.
STRAP HOLDDOWN1 X 4.5 X .5270-446D16.
CLAMP270-447D17.
COLLAR LOCK 40MM270-441D18.
HHCS M20X2.5X70 GR8.8 FTHD802-999C19.
NUT HEX JAM M20X2.5803-401C20.

Table of Contents Part Number Index

Referto Hydraulic Cylinder(810-774C)

for breakdown

Frame

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 51 - 270-600P

Table of Contents Part Number Index

Front Side Panel Mounting

(Applies to CDA600 only)

34225

270-600P - 52 - 07/23/14

Table of Contents Part Number Index

Front Side Panel Mounting

(Applies to CDA600 only)

Image No.dwg34225
PANEL SIDE FRONT RIGHT817-917C1.
HSBHCS M6X1.00X25 SS802-970C2.
NUT HEX NYLOCK M6X1803-386C3.
HSBHCS M8X1.25X25 SS802-968C4.
NUT HEX NYLOCK M8X1.25 PLT803-278C5.

11.85 X 19.72 120 LB GAS SPRG891-283C6.

NUT HEX NYLOCK 5/16-18 PLT803-084C8.
HHCS M8X1.25X25 GR8.8 ZNYCR802-714C9.
MOUNT SIDE PANELS FRONT270-133H10.
SHIM SPACER 2 1/2 X 1 1/2270-488D11.
LADDER/HOPPER SUPORTWLDMT270-132H12.
WASHER FLAT M8 PLT804-161C13.
NUT LOCK M8X1.25803-394C14.
STOB 1OD X 7/16 SS270-534D15.
PIN HAIR COTTER .094805-010C16.
FRAME LEFT SIDE PANEL270-118H17.
PANEL SIDE COVER FRONT LEFT817-915C18.
FRAME RIGHT SIDE PANEL270-119H19.
MINI END WHEEL PRESS WHEEL817-042C20.
MANUAL PAK 1" W/ GASKET817-516C21.
WASHER FLAT M6 PLT804-160C22.
HHCS M6X1X25 GR8.8802-557C23.
HHCS M6X1X60 GR8.8842-082C24.
SPRING .540 O.D.X 1 1/4 X.054W807-106C25.
WASHER FLAT M6 PLT804-160C26.
WASHER FLAT M8 SS804-253C27.
CULT DRILL CALIBRATION BAG816-736C28.
DIGITAL SCALE 50 LB/23 KG891-209C29.
MAGNET, 3 3/16 OD X 57LB891-282C30.

Hopper

RevisionCommentsPart DescriptionPart No.Ref.

Included in item 6BALL STUD 10MM X 5/16-18 UNC800-121C7.

07/23/14 - 53 - 270-600P

Hopper Mounting

(Applies to CDA600 only)

Table of Contents Part Number Index

34146

270-600P - 54 - 07/23/14

Hopper Mounting

(Applies to CDA600 only)

Image No.dwg34146
HOPPER270-089A1.

HANDRAIL WLDMT270-134H2.
LADDER/HOPPER SUPORTWLDMT270-132H3.
HHCS M8X1.25X50 GR8.8802-963C4.
NUT LOCK M8X1.25803-394C5.
HHCS M16X2.0X35 GR8.8802-966C6.
WASHER SPRING LOCK M16 PLT804-187C7.
FRAME CENTER WLDMT270-117H8.
HHCS M20X2.5X100 GR8.8802-989C9.

NUT HEX NYLOCK M20X2.5803-393C11.

Table of Contents Part Number Index

Refer to Hopper Assembly for

breakdown

Used with Scale OptionLOAD CELL, 10,000 LB833-588C10.

Used without Scale OptionBAR RND 2 1/8 OD X 12 LONG270-489D12.

Hopper

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 55 - 270-600P

Hopper Side Panels

(Applies to CDA600 only)

Table of Contents Part Number Index

34147

270-600P - 56 - 07/23/14

Hopper Side Panels

(Applies to CDA600 only)

Image No.dwg34147
HSBHCS M8X1.25X35 SS802-969C1.
NUT HEX NYLOCK M8X1.25 PLT803-278C2.
PANEL SIDE REAR RIGHT817-918C3.
STRAP 1 1/4 WIDE X 59 LONG270-041D4.
SOLID AND SHTMETEL HOPPER ASY270-003H5.
HSBHCS M8X1.25X25 SS802-968C6.
PANEL REAR COVER817-919C7.
SIDE PANEL MOUNT BRACKET270-006H8.
PANEL SIDE REAR LEFT817-916C9.
PULL HANDLE 5 3/16 CENTER817-940C10.
PLATE SIDE PANEL MOUNT270-037D11.
DRAW LATCH, RUBBER 4 9/16816-738C12.
HHCS M5X.80X30 GR8.8802-972C13.
NUT HEX NYLOCK M5X.8803-390C14.
WINDOW, LEXAN 4100L817-935C15.
WASHER FENDER M8 X 24804-243C16.
BRACKET LOWER SIDE PANEL270-543D17.
STRAP 1 X 5.50 LONG270-039D18.
BRACKET SIDE PANELMOUNT270-038D19.
HSBHCS M6X1.00X25 SS802-970C20.
WASHER FENDER M5 X 15804-245C21.
NUT HEX NYLOCK M6X1803-386C22.
HHCS M8X1.25X25 GR8.8 ZNYCR802-714C23.

Table of Contents Part Number Index

Hopper

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 57 - 270-600P

Table of Contents Part Number Index

Hopper Tarp Cover Assembly

(Applies to CDA600 only)

34223

270-600P - 58 - 07/23/14

Table of Contents Part Number Index

Hopper Tarp Cover Assembly

(Applies to CDA600 only)

Image No.dwg34223
CULT DRILL TARP - 113X50891-284C1.
HANDLE BENT STAINLESS 5/8 RND270-472D2.
CRANK MNT 20 SPLINE834-262C3.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C4.

HHCS M6X1X15 GR8.8 PLT802-741C6.
STRAP - ROPE RETAINER891-286C7.
STOB - 5/8 OD 20 SPLINE270-180H8.
TUBE 1 1/8 OD X 110 1/2 LG270-473D9.
HHCS M6X1X50 GR8.8802-953C10.
PLASTIC U-CLAMP817-941C11.
PAN HD SELF DRILL M6.3X1.8X19801-239C12.
STOB 15/16 INSERT 7/16 HOLE270-036D13.
HHCS M6X1X35 GR8.8802-952C14.
HHCS M8X1.25X20 GR8.8802-314C15.
PLATE TARP ROD AND BUNGEE HOLD270-032D16.
NUT HEX NYLOCK M8X1.25 PLT803-278C17.
TUBE 1 1/8 X 13G WL X 107.75270-033D18.
CLAMP TARP HOLD DOWN270-031D19.
ROD SS M10 THD ENDS270-005H20.
HSBHCS M10X1.50X40 SS802-971C21.
ALUMINUM TARP LATCH PLATE270-034D22.
STRAP BENT HANDLE STOP270-035D23.
HSBHCS M8X1.25X25 SS802-968C24.
NUT HEX NYLOCK M6X1803-386C25.
HSBHCS M6X1.00X25 SS802-970C26.
WASHER SPRING LOCK M10 PLT804-158C27.

Hopper

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 2-4CRANK HANDLE - CULTDRILL TARP270-181L5.

07/23/14 - 59 - 270-600P

Table of Contents Part Number Index

Bout Marker Hydraulics

(Applies to CDA600 only)

34826

270-600P - 60 - 07/23/14

Table of Contents Part Number Index

Bout Marker Hydraulics

(Applies to CDA600 only)

Image No.dwg34826
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH1/4R2 119.5 1/4MQLH901/4FBSP841-739C2.
HH1/4R2 117.5 1/4MQLH901/4FBSP841-737C3.
HH1/4R2 149.5 1/4MQLH901/4FBSP841-741C4.
HH1/4R2 141.5 1/4MQLH901/4FBSP841-740C5.
HH1/4R2 134.5 1/4FBSP841-738C6.
AD 1/4MBSPP BLKHD W/LN841-789C7.
WASHER 3/8BSPP BONDED841-793C8.
AD 3/8MBSPP 3/8MBSPP841-801C9.
CYL 60X475X32 ROD810-775C10.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 61 - 270-600P

Coultivator Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34831

270-600P - 62 - 07/23/14

Table of Contents Part Number Index

Coultivator Hydraulics

(Applies to CDA600 only)

Image No.dwg34831
AD 3/8MBSPP 3/8MBSPP841-801C1.
WASHER 3/8BSPP BONDED841-793C2.
CYL REP 50.8X200X30 ROD810-762C3.
HH3/8R2 54.0 3/8FBSP 3/8FBSP90841-753C4.
HH3/8R2 106.0 3/8FBSP 3/8FBSP9841-750C5.
CYL REP 60X200X32 ROD810-761C6.
HH3/8R2 55.0 3/8FBSP 3/8FBSP90841-752C7.
HH3/8R2 66.0 3/8MQLH90 3/8FBSP841-746C8.
HH3/8R2 34.0 3/8FBSP 3/8FBSP90841-759C9.
HH3/8R2 8.0 3/8FBSP 3/8FBSP90841-758C10.
TEE 3/8MBSPP 3/8MBSPP 3/8MBSPP841-808C11.
CYL REP 70X200X36 ROD MEMORY810-777C12.
EL ADJ 3/8MBSPP 3/8MBSPP841-804C13.
HH3/8R2 96.5 3/8MQLH90 3/8FBSP841-751C14.
HH3/8R2 84.5 3/8FBSP 3/8MQLH90841-755C15.
HH3/8R2 60.5 3/8FBSP 3/8MQLH90841-761C16.
HH3/8R2 73.5 3/8MQLH90 3/8FBSP841-760C17.
HH3/8R2 74.5 3/8FBSP 3/8FBSP90841-748C18.
HH3/8R2 52.0 3/8FBSP 3/8FBSP90841-749C19.
AD 3/8MBSPP BLKHD W/LN841-788C20.
AD 3/8MBSPP BLKHD TEE W/LN841-790C21.
HH3/8R2 41.0 3/8FBSP 3/8FBSP90841-763C22.
HH3/8R2 72.5 3/8MQLH90 3/8FBSP841-754C23.
HH3/8R2 39.5 3/8MQLH90 3/8FBSP841-762C24.
HH3/8R2 52.5 3/8FBSP 3/8MQLH90841-747C25.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 63 - 270-600P

Fan Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34838

270-600P - 64 - 07/23/14

Fan Hydraulics

(Applies to CDA600 only)

Image No.dwg34838
HH1/4R2 84.0 1/4MBSPP1/4FBSP45841-772C1.
AD 1/4MBSPP BLKHD W/LN841-789C2.
HH1/4R2 172.0 1/4FBSP1/4FBSP90841-767C3.
VALVE MANIFOLD W/ FITTINGS270-249S4.
HH1/2R2 27.0 1/2MQLH90 1/2FBSP841-743C5.
HH3/8R2 20.5 1/4FBSP90 1/2FBSP841-756C6.
AD 1 1/16MORB 1/2MBSP841-673C7.
AD 9/16MORB 1/4MBSP841-674C8.
TEE 1/4MBSPP 1/4FBSPP 1/4MBSPP841-810C9.

Table of Contents Part Number Index

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 65 - 270-600P

Fold Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34401

270-600P - 66 - 07/23/14

Fold Hydraulics

(Applies to CDA600 only)

Image No.dwg34401
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH3/8R2 16.0 3/8MQLH90 3/8FBSP841-700C2.
HH3/8R2 23.5 3/8MQLH90 3/8FBSP841-698C3.
CYL 100 X 50 X 851 STROKE810-774C4.
TEE 3/8MBSPP 3/8MBSPP 3/8MBSPP841-808C5.
HH3/8R2 136.5 3/8FBSP841-701C6.
HH3/8R2 151.5 3/8FBSP 3/8BANJO841-699C7.
HH3/8R2 46.5 3/8FBSP 3/8FBSP90841-702C8.
WASHER 3/8BSPP BONDED841-793C9.
AD 3/8MBSPP 3/8MBSPP841-801C10.
AD 3/8MBSPP 3/8FBSPP SWIVEL841-806C11.
VALVE COUNTERBALANCE 4 PORT810-797C12.
HH3/8R2 31.0 3/8FBSP 3/8BANJO841-703C13.
HHCS M8X1.25X45 GR8.8802-683C14.
NUT HEX NYLOCK M8X1.25 PLT803-278C15.
STAUFF CLAMP-TOP PLATE841-660C16.
STAUFF CLAMP-3/8" PAIR841-661C17.
PLT HOSE SUPPORT270-536D18.

Table of Contents Part Number Index

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 67 - 270-600P

Gauge Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34834

270-600P - 68 - 07/23/14

Gauge Hydraulics

(Applies to CDA600 only)

Image No.dwg34834
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH1/4R2 34.5 1/4MQLH90 1/4FBSP841-765C2.
SWITCH, PUSH BTN W/SEAL CONTR833-586C3.
GAUGE - 2000PSI 2 1/2 GLYCFLD829-146C4.
AD 1/4MBSPP 1/4FBSPP841-811C5.
DOWN PRESR KNOB270-127H6.
DOWN PRESS LOCK PLATE270-358D7.
LOW-SPEEDU-JOINT 1/4826-748C8.
PIN ROLL 3MM X 14MM PLT805-458C9.
DOWN PRESR TIE ROD270-357D10.
SCREW SET SH 6-1X6801-241C11.
DOWN PRESR VALVE CLEVIS270-354D12.
DOWN PRESR VALVE KEEPER270-352D13.

Table of Contents Part Number Index

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 69 - 270-600P

Table of Contents Part Number Index

Leveling Board Hydraulics

(Applies to CDA600 only)

34823

270-600P - 70 - 07/23/14

Table of Contents Part Number Index

Leveling Board Hydraulics

(Applies to CDA600 only)

Image No.dwg34823
HH3/8R2 50.5 1/2MBSP 3/8FBSP45841-720C1.
AD 3/8MBSPP BLKHD W/LN841-788C2.
HH3/8R2 250.0 3/8FBSP841-721C3.
HH3/8R2 259.5 3/8FBSP453/8FBSP841-726C4.
CYL REP 50.8X125X30 ROD810-758C5.
HH1/2R2 158.0 1/2FBSP1/2MQLH90841-766C6.
WASHER 3/8BSPP BONDED841-793C7.
AD 3/8MBSPP 3/8MBSPP841-801C8.
HH3/8R2 103.5 3/8FBSP3/8FBSP90841-724C9.
HH3/8R2 97.5 3/8FBSP 3/8FBSP90841-728C10.
HH3/8R2 44.5 3/8FBSP90 3/8FBSP841-727C11.
AD 3/8MBSPP BLKHD TEE W/LN841-790C12.
TEE 3/8MBSPP 3/8MBSPP 3/8MBSPP841-808C13.
HH3/8R2 95.5 3/8FBSP 3/8FBSP90841-722C14.
HH3/8R2 44.5 3/8FBSP 3/8FBSP90841-725C15.
HH3/8R2 36.0 3/8FBSP 3/8FBSP90841-723C16.
CYL REP 60X125X32 ROD810-756C17.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 71 - 270-600P

Opener Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34407

270-600P - 72 - 07/23/14

Opener Hydraulics

(Applies to CDA600 only)

Image No.dwg34407
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH1/2R2 140.5 1/2MQLH901/2FBSP841-716C2.
HH1/2R2 126.0 1/2MQLH901/2FBSP841-710C3.
HH1/2R2 142.0 1/2FBSP 1/2BANJO841-712C4.
AD 1/2MBSPP BLKHD W/LN841-787C5.
HH1/2R2 16.5 1/2FBSP45 1/2FBS841-711C6.
HH1/2R2 19.0 1/2FBSP45 1/2FBSP841-717C7.
HH1/2R2 24.5 1/2FBSP90 1/2FBSP841-715C8.
HH1/2R2 26.0 1/2FBSP90 1/2FBSP841-719C9.
AD 1/2MBSPP 1/2MBSPP841-800C10.
WASHER 1/2BSPP BONDED841-792C11.
EL ADJ 1/2MBSP 1/2MBSPP841-803C12.
JUNCTION BLOCK 1/2BSPP 4PORT810-798C13.
HH1/2R2 81.5 1/2FBSP841-713C14.
HH3/4R4 70 1 1/16FJIC841-087C15.
HH1/2R2 42.0 1/2FBSP 1/2BANJO841-714C16.
HH1/2R2 51.5 1/2FBSP 1/2BANJO841-718C17.
CYL 75MM X 200MM TRUNION810-760C18.
STAUFF CLAMP-1/2" SINGLE841-677C19.
STAUFF CLAMP-STACK BOLT M8841-666C20.
STAUFF CLAMP-LOCK CLIP841-665C21.
STAUFF CLAMP-TOP PLATE841-660C22.
HHCS M8X1.25X85 GR8.8842-018C23.
NUT HEX NYLOCK M8X1.25 PLT803-278C24.

Table of Contents Part Number Index

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 73 - 270-600P

Table of Contents Part Number Index

Pre-Emergence Marker Hydraulics

(Applies to CDA600 only)

34825

270-600P - 74 - 07/23/14

Table of Contents Part Number Index

Pre-Emergence Marker Hydraulics

(Applies to CDA600 only)

Image No.dwg34825
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH1/4R2 291.5 1/4MQLH901/4FBSP841-742C2.
AD 3/8MBSPP 3/8MBSPP841-801C3.
WASHER 3/8BSPP BONDED841-793C4.
CYL 32X100X20 ROD810-779C5.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 75 - 270-600P

Table of Contents Part Number Index

Track Eradicator Hydraulics

(Applies to CDA600 only)

34824

270-600P - 76 - 07/23/14

Table of Contents Part Number Index

Track Eradicator Hydraulics

(Applies to CDA600 only)

Image No.dwg34824
HH1/4R2 54.5 1/4MQLH90 1/4FBSP841-729C1.
HH1/4R2 52.0 1/4MQLH90 1/4FBSP841-733C2.
TEE 1/4MBSPP 1/4FBSPP 1/4MBSPP841-810C3.
AD 3/8MBSPP BLKHD W/LN841-788C4.
HH1/4R2 40.5 1/4FBSP 1/4FBSP90841-735C5.
HH1/4R2 38.0 1/4FBSP 1/4FBSP90841-731C6.
HH1/4R2 71.0 1/4FBSP 1/4FBSP90841-730C7.
HH1/4R2 76.5 1/4FBSP 1/4FBSP90841-734C8.
HH1/4R2 75.5 1/4FBSP 1/4FBSP90841-736C9.
HH1/4R2 66.5 1/4FBSP 1/4FBSP90841-732C10.
AD 1/4MBSPP 1/4MBSPP841-802C11.
WASHER 1/4BSPP BONDED841-794C12.
CYL 50X150X30 ROD810-759C13.
VALVE MANIFOLD W/ FITTINGS270-249S14.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 77 - 270-600P

Table of Contents Part Number Index

Tractor and Tongue Hydraulics

(Applies to CDA600 only)

34836

270-600P - 78 - 07/23/14

Table of Contents Part Number Index

Tractor and Tongue Hydraulics

(Applies to CDA600 only)

Image No.dwg34836
HH1/2R2 84.0 1/2MBSPP1/2FBSP45841-771C1.
AD 1/2MBSPP BLKHD W/LN841-787C2.
AD 1/4MBSPP BLKHD W/LN841-789C3.
HH1/4R2 84.0 1/4MBSPP1/4FBSP45841-772C4.
VALVE MANIFOLD W/ FITTINGS270-249S5.
HH1/4R2 178.0 1/4FBSP1/4MQLH90841-768C6.
HH1/4R2 185.0 1/4FBSP1/4MQLH90841-769C7.
HH1/2R2 158.0 1/2FBSP1/2MQLH90841-766C8.
HH1/2R2 156.0 1/2FBSP 1/2MQLH841-770C9.
HH1/4R2 172.0 1/4FBSP1/4FBSP90841-767C10.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 79 - 270-600P

Transport Hydraulics

(Applies to CDA600 only)

Table of Contents Part Number Index

34402

270-600P - 80 - 07/23/14

Table of Contents Part Number Index

Transport Hydraulics

(Applies to CDA600 only)

Image No.dwg34402
VALVE MANIFOLD W/ FITTINGS270-249S1.
HH1/2R2 94.5 1/2MQLH90 1/2FBSP841-707C2.
HH1/2R2 96.0 1/2MQLH90 1/2FBSP841-704C3.
TEE 1/2MBSPP 1/2MBSPP 1/2MBSPP841-807C4.
HH1/2R2 25.5 1/2FBSP 1/2BANJO841-706C5.
HH1/2R2 35.5 1/2FBSP 1/2MBSP841-709C6.
HH1/2R2 60.5 1/2FBSP 1/2BANJO841-705C7.
HH1/2R2 69.5 1/2FBSP 1/2MBSP841-708C8.
CYL 100MM X 300MM810-776C9.
AD 1/2MBSPP 1/2MBSPP841-800C10.
WASHER 1/2BSPP BONDED841-792C11.
VLV BALL 1/2FBSP BLOCK810-812C12.
AD 1/2MBSPP 1/2FBSPP SWIVEL841-805C13.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 81 - 270-600P

Table of Contents Part Number Index

Valve Manifold with Fittings

(Applies to CDA600 only)

34854

270-600P - 82 - 07/23/14

Table of Contents Part Number Index

Valve Manifold with Fittings

(Applies to CDA600 only)

Image No.dwg34854
MANIFOLD MULTIFUCTION CONT BSP810-778C1.
WASHER 1/4BSPP BONDED841-794C2.
PLUG 1/4 BSPP HOLLOW HEX841-843C3.
AD QUICK LOK 04FQLH-04MBSPP841-989C4.
AD QUICK LOK 06FQLH-06MBSPP841-990C5.
AD QUICK LOK 08FQLH-08MBSPP841-991C6.

Hydraulics

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 83 - 270-600P

Bout Markers

(Applies to CDA600 only)

Table of Contents Part Number Index

34207

270-600P - 84 - 07/23/14

Bout Markers

(Applies to CDA600 only)

Image No.dwg34207
NUT HEX NYLOCK M10X1.5 PLT803-280C1.
HHCS M10X1.5X70 GR8.8802-975C2.
PIN 40MM OD X 250MM W/ HOLE270-415D3.
BUSHING 50 X 40 X 25 CONNEX891-272C4.
GREASE ZERK STRAGHT 1/8-28 BSP800-432C5.

HHCS M10X1.5X110 GR8.8842-187C7.
WASHER FLAT M10 PLT804-162C8.
NUT HEX NYLOCK M10X1.5 PLT803-280C9.
HHCS M10X1.5X55 GR8.8802-610C10.
PIN 32MM X 125MM W/HOLE270-522D11.

6M MARKER ARM WELDMENT270-019H13.
CYLINDER PIN270-416D14.
CYL 60MMX475MM810-775C15.
U-BOLT M10X1.5X39X70806-228C16.
HHCS M12X1.75X70 GR8.8802-980C17.
MARKER EXTENSION TUBE WELDMENT270-012H18.
WASHER FLAT M12 PLT804-246C19.
NUT HEX NYLOCK M12X1.75 PLT803-281C20.
1 SPINDLE MARKER WELDMENT113-562H21.
TINE GAUGE WHEEL HUB SEAL816-014C22.
BRG CONE 1.00ID L44643822-030C23.
NEILSON STUD 1/2-20UNFX1 13/16BO-4724.
BRG CUP 1.980D L44610822-080C25.
RELIABLE HUB 4 BOLT1-100-02-0026.
GREASE CAP #1505890-614C27.
NUT LUG 1/2-20X60DEG PLT(.75AF803-159C28.

WASHER FLAT 3/4 SAE PLT804-025C30.
NUT HEX SLOTTED 3/4-16803-053C31.
PIN COTTER5/32 X 1 PLT805-019C32.
16 4-BOLT NOTCHED MARKER DISK820-094C33.
DEPTH BAND 10 4-BOLT4B.C.113-369H34.
MARKER DISC SAFETY STRAP113-858D35.

Table of Contents Part Number Index

Shown LHMARKER PIVOT WELDMENT270-020H6.

RHRIGHT MARKER PIVOT WELDMENT270-017H6.

Shown LHPIVOTARM WELDMENT270-021H12.

RHRIGHT PIVOT ARM WELDMENT270-018H12.

Includes items 22-28TINE GW HUB815-001C29.

Includes items 21-35MARKER DISC & HUB ASSEMBLY113-563S36.

Markers

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 85 - 270-600P

Table of Contents Part Number Index

Pre-Emergence Markers

(Applies to CDA600 only)

34209

270-600P - 86 - 07/23/14

Table of Contents Part Number Index

Pre-Emergence Markers

(Applies to CDA600 only)

Image No.dwg34209
NUT LOCK M12X1.75803-395C1.
CLAMP RUBBERMOUNT270-164D2.
RUBBER ELEMENT 1.25 X 4.13816-733C3.
HHCS M16X2X100 GR8.8802-984C4.
RHSNB M12X1.75X90 GR8.8802-991C5.
HHCS M12X1.75X50 GR10.9 FTHD802-978C6.
BRKT PRE-EMERG RUBBER ELEM270-049H7.
NUT HEX NYLOCK M16X2.00 GRB PT803-282C8.
CYL 32MMX100MMX20MM810-779C9.
HHCS M16X2X50 GR8.8 SPTHD842-009C10.
PARALLEL ARM PIVOT BUSHING817-084C11.
TUBE PIVOT .75 X .51 X 2.47270-367D12.
BUSHING .75 X .50 X .41270-368D13.
HHCS M12X1.75X40 GR8.8802-977C14.
CIRCLE COTTER52X2.6800-430C15.
PIN Ø16X73606-053D16.
PREEMERGE ARM WELDMENT270-011H17.
U-BOLT M16-2.00 X 64 X 100806-230C18.
STOP PRE-EMERG ARM270-013H19.
NUT HEX M16X2.00 NYLON INSERT803-282C20.
NUT LOCK M20X1.5803-404C21.
SPACER 20MM TAPERED270-514D22.
TINE GAUGE WHEEL HUB SEAL816-014C23.
BRG CONE 1.00ID L44643822-030C24.
BRG CUP 1.980D L44610822-080C25.
NEILSON STUD 1/2-20UNFX1 13/16BO-4726.
RELIABLE HUB 4 BOLT1-100-02-0027.
GREASE CAP #1505890-614C28.
NUT LUG 1/2-20X60DEG PLT(.75AF803-159C29.

SPINDLE MARKER DISC 20MM THD270-513D31.
WASHER FLAT M20 PLT804-244C32.
NUT HEX SLOTTED M20X1.5803-405C33.
PIN COTTER5/32 X 1 PLT805-019C34.
16 4-BOLT NOTCHED MARKER DISK820-094C35.

MARKER DISK SAFETY STRAP113-858D37.

Markers

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 23-29TINE GW HUB815-001C30.

Includes Items 30-35 & 37PREEMERGE MARKER DISK ASSM270-204S36.

07/23/14 - 87 - 270-600P

Fan and Metering

(Applies to CDA600 only)

Table of Contents Part Number Index

34151

270-600P - 88 - 07/23/14

Fan and Metering

(Applies to CDA600 only)

Image No.dwg34151
NUT HEX NYLOCK M10X1.5 PLT803-280C1.
YP FAN MOUNT WLDMNT401-203H2.
HHCS M10X1.5X30 GR8.8802-609C3.
IND.SENSOR M12X60833-581C4.

FLEX GUARDHOSE.594 OD X.413ID817-044C6.
METER AD SINGLE ROLLER ASSY270-129S7.

HOSE 6.0 ID DUCTING X 2.5 FT816-653C8.
AIR BOX NARROW270-196H9.
HHCS M8X1.25X18 GR8.8842-019C10.
HHCS M6X1X10 GR8.8802-606C11.
WASHER FENDER 1/4 X 1804-131C12.
NUT HEX NYLOCK M6X1803-386C13.
DOOR CLEANOUT DUAL OUT AIRBOX270-199H14.

NUT HEX NYLOCK 1/2-13803-147C16.
PARKER F-11 FAN MOTOR810-556C17.
SCREW HEX SELF TAP 1/4-20X3/4801-081C18.
CRARY FAN MOTOR B MOUNT PLATE2331719.
HUB/MOTORPLATE SEAL (2B)2390720.
WASHER FLAT 3/8 SAE PLT804-012C21.
HHCS 3/8-16X1 1/4 GR5802-079C22.
6 FAN HOUSING LH SIDE2332023.
NUT HEX FLANGE 1/4-20 PLT803-230C24.
13 FAN IMPELLER1708925.
6 FAN HOUSING RH SIDE2112126.
HFSS 1/4-20X1 GR5802-375C27.
BUSHING, JAX 20 MM890-891C28.
BRKT FAN SENSOR MOUNT MUELLER270-458D29.
WASHER SPRING LOCK M8 PLT804-157C30.
NUT HEX NYLOCK M8X1.25 PLT803-278C31.
HHCS M10X1.5X150 GR8.8802-998C32.
WASHER FLAT M10 PLT804-162C33.
HHCS 5/16-18X4 GR5802-279C34.
HHCS M10X1.5X35 PLT802-628C35.
LINEAR ACTUATOR 12V 100MM833-587C36.
SCREEN HOPPER 4100L270-004H37.
TUBE RND 16MM X 10MM X 19MM LG270-068D38.
HHCS M8X1.25X35 GR8.8802-967C39.
SILICON 35YR CLEAR 10 OZ890-179C40.
PLT HOSE SUPPORT270-536D41.
HHCS M12X1.75X80 GR8.8 PLT802-486C42.
WASHER FLAT M12 PLT804-246C43.
NUT HEX NYLOCK M12X1.75 PLT803-281C44.
TOOLBOX ASM270-176K45.
TEE 1/4MBSPP 1/4FBSPP 1/4MBSPP841-810C46.
AD 9/16MORB 1/4MBSP841-674C47.
AD 1 1/16MORB 1/2MBSP841-673C48.

Table of Contents Part Number Index

Includes item 15FAN6" ASM W/BSP270-174K5.

Refer to Meter Assembly for

breakdown

Includes items 4, 12 & 16-296 HYD FAN W/CASE DRAIN MOTOR891-131C15.

Metering

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 89 - 270-600P

Meterbox Assembly

(Applies to CDA600 only)

Table of Contents Part Number Index

34152

270-600P - 90 - 07/23/14

Meterbox Assembly

(Applies to CDA600 only)

Image No.dwg34152
ROBE LANYARD LOOP ENDS 12 SS891-294C1.
HANDLE GRAB 4 1/8WIDE1 1/2TALL817-936C2.
END PANEL, DRUM AIR METER270-403D3.
HSHCS 1/4-20X7/8802-418C4.
HSHCS M8X1.25X30 GR8.8 PLT802-775C5.
SCREW SPAX #8X3/4 PAN HEAD801-187C6.
SNAP RING EXT 5/8800-045C7.
SHAFT METER DRUM DRIVE V1270-345D8.
ROLL PIN 8MMX50MM SS805-457C9.
ROLL PIN 5MM X 50MM 304 SS805-453C10.
SHAFT AGITATOR270-342D11.
HSHCS M5X.8X6 304 SS802-956C12.
PLUNGER SPRING 1/4" 4-9LB800-422C13.
SLIDE GATE AIR METER WLDMT270-126H14.
DRUM SEED WHEAT 6 ROWS270-520D15.
METER AIR DRILL SINGLE ROLLER270-347D16.
RUBBER 1 1/4 WIDE 6 LG 1/4THK816-734C17.
STRIP STAINLESS RUBBER BACKER270-351D18.
SCREEN 6 3/4X2 ROUND HOLE270-517D19.
PLASTIC TIMING PULLEY817-938C20.
RUBBER BELT .38 X15.80816-735C21.
COUPLER 1/2 TO 14MM270-348D22.
SCREW SET SH 6-1X6801-241C23.
HSHCS M5X.8X20 304 SS802-957C24.
HHCS M8X1.25X18 GR8.8842-019C25.
MOUNT MOTOR TO METER270-125H26.
MOTOR12V 150RPM 5 LB-FT833-575C27.
DRUM SEED BEANS CHEVRON FLUTES270-518D28.
DRUM SEED OSR/SMALL 4 ROWS270-519D29.
DIGITAL SCALE 50 LB/23 KG891-209C30.
CULT DRILL CALIBRATION BAG816-736C31.
DRUM SEED CEREALS 4 ROWS270-594D32.
DRUM SEED SUNFLOWERS 4 ROW270-598D33.

Table of Contents Part Number Index

Metering

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 91 - 270-600P

Tower Assembly

(Applies to CDA600 only)

Table of Contents Part Number Index

34153

270-600P - 92 - 07/23/14

Tower Assembly

(Applies to CDA600 only)

Image No.dwg34153
HANDLE T M8X1.25 THD STUD270-190H1.

KNOB 6MX1817-947C3.
CONE TOWER817-946C4.
SFCHMS M6X1X25802-994C5.

BLOCKAGE SENSOR 32MM MODULAR833-591C7.
ELBOW 1 1/2" INLET SS INSERT816-689C8.
CLAMP HOSE 1 1/2 NO. 24800-008C9.
TOWER4" W/ HUB270-188H10.
NUT HEX NYLOCK M6X1803-386C11.
CLIP E 4 ID X 3/16 WIRE800-428C12.

HOSE CLAMP 4.53 - 4.84 T BOLT800-426C14.
PVC SEED HOSE 4 ID990-273R15.

Table of Contents Part Number Index

Shown. Used with 48 RowPLATE FORMED TOWER TOP 24 ROW270-487D2.

Used with 36 RowPLATE FORMED TOWER TOP 18 ROW270-516D2.

Shown. Used with 48 RowTOWER BASE 24 ROW270-189H6.

Used with 36 RowTOWER BASE 18 ROW270-203H6.

Shown. Used with 48 RowCOVER, 4 TOWER ELECTRONICS24R817-945C13.

Used with 36 RowCOVER 4" TOWER ELECTRONICS 18R817-949C13.

Metering

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 93 - 270-600P

Table of Contents Part Number Index

Dickey John Blockage System

(Applies to CDA600 only)

34235

270-600P - 94 - 07/23/14

Table of Contents Part Number Index

Dickey John Blockage System

(Applies to CDA600 only)

Image No.dwg34235
ECU INTER CABLE MULLER TO D-J833-625C1.
PRIMARY BLOCKAGE HARNESS 20ROW833-633C2.

NUT HEX NYLOCK M5X.8803-390C4.
NUT HEX M5X.8803-391C5.
MODULE 40 ROW INPUT467985510S16.
ROD THD M5 X .8 X 94 LONG270-363D7.
CAN TERMINATOR 9 PIN RND833-624C8.

Monitor and Frame Control

RevisionCommentsPart DescriptionPart No.Ref.

Only used on 48 RowSECONDARY BLOCKAGE HARNES 4ROW833-634C3.

07/23/14 - 95 - 270-600P

Table of Contents Part Number Index

Digi-Star Weight System

(Applies to CDA600 only)

36025

270-600P - 96 - 07/23/14

Table of Contents Part Number Index

Digi-Star Weight System

(Applies to CDA600 only)

Image No.dwg36025
HHCS M4-0.7X12 GR8.8802-829C1.
NUT HEX NYLOCK M4X.7803-409C2.
LOAD CELL, 10,000 LB833-588C3.
DIGISTAR SL110 SCALE ECU833-589C4.

Monitor and Frame Control

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 97 - 270-600P

Mueller Monitor

(Applies to CDA600 only)

Table of Contents Part Number Index

34234

270-600P - 98 - 07/23/14

Mueller Monitor

(Applies to CDA600 only)

Image No.dwg34234
ISOBUS CABLE W/ 6PIN DEUTSCH833-578C1.
HHCS M6X1X20 GR8.8842-021C2.
ECU833-579C3.
NUT HEX NYLOCK M6X1803-386C4.
HARNESS WIRING CULTIVATE DRILL833-599C5.
SWITCH, PUSH BTN W/SEAL CONTR833-586C6.
IN-CAB KIT833-577C7.
BASIC TERMINAL833-590C8.
COMFORT TERMINAL833-576C9.
CAPACITIVE SNSR FIL LVL M18X46833-583C10.
LINEAR ACTUATOR 12V 100MM833-587C11.
IND.SENSOR M18X46833-582C12.
SWITCH, PUSH BUTTON W/DEUTSCH833-585C13.
RADAR SENSOR W/AMP PLUG833-580C14.
HHCS M6X1X10 GR8.8802-606C15.

Table of Contents Part Number Index

AccessoryCAMERA MULLER TILTZOOM 11M M12833-593C16.

Monitor and Frame Control

RevisionCommentsPart DescriptionPart No.Ref.

07/23/14 - 99 - 270-600P

Keeton Seed Firmer

(Applies to CDA600 only)

Table of Contents Part Number Index

34772

270-600P - 100 - 07/23/14