Great Plains 8560 FCF Operator Manual
Table of Contents Index
8539, 8544, 8548, 8551, 8556 & 8560
Field Cultivator, Constant Level
Operator Manual
8323, 8328, 8332, 8336,
Manufacturing, Inc.
www.greatplainsmfg.com
Read the operator’s manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
41725
Illustrations may show optional equipment not supplied with standard unit.
ORIGINAL INSTRUCTIONS
© Copyright 2013 Printed 2013-11-12 560-483M
Table of Contents Index
EN
Table of Contents Index
Table of Contents Index
Great Plains Manufacturing, Inc. iii
Table of Contents
Important Safety Information ...................................... 1
Safety Decals ................................................................. 5
Introduction ...............................................................10
Models Covered ........................................................... 10
Description of Unit ........................................................10
Document Family......................................................10
Using This Manual........................................................10
Definitions................................................................. 10
Owner Assistance ........................................................11
Preparation and Setup ...............................................12
Prior to Going to the Field Checklist.............................12
Hitching Tractor to Field Cultivator ...............................13
Hydraulic Hose Hookup............................................ 14
Hose Handles...........................................................14
First Time Field Adjustments........................................14
Front to Rear Leveling..............................................14
Operating Instructions...............................................16
Pre-Start Checklist .......................................................16
Transporting ................................................................. 17
Check Tractor Capacity and Configuration .............. 17
Transport Checklist .................................................. 17
General Operation and In-Field Adjustments............... 17
Gauge Wheel Adjustment ........................................ 18
Rear Attachment Settings ............................................ 19
Spike Drag Settings ................................................. 19
Coil Tine Settings ..................................................... 19
Heavy Reel Adjustment............................................ 20
Maintenance and Lubrication ................................... 21
Maintenance ................................................................ 21
Lubrication ................................................................... 21
Appendix..................................................................... 23
FC Specifications and Capacities ................................ 23
Tire Inflation Chart ....................................................... 24
Tires Chart ................................................................... 24
Hydraulic Connectors and Torque ............................... 25
Torque Values Chart.................................................... 26
Warranty ...................................................................... 27
Index............................................................................ 29
© Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
11/12/2013 560-483M
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
iv 8323-8560FCC Great Plains Manufacturing, Inc.
560-483M 11/12/2013
Great Plains Manufacturing, Inc. 1
Important Safety Information
Look for Safety Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Be Aware of Signal Words
Signal words designate a degree or level of hazard seriousness.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme situations,
typically for machine components that, for functional purposes, cannot be guarded.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury, and includes hazards that are exposed when
guards are removed. It may also be used to alert against
unsafe practices.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe practices.
Prepare for Emergencies
▲ Be prepared if a fire starts
▲ Keep a first aid kit and fire extinguisher handy.
▲ Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Be Familiar with Safety Decals
▲ Read and understand “Safety Decals” on page 5, thor-
oughly.
▲ Read all instructions noted on the decals.
▲ Keep decals clean. Replace damaged, faded and illegible
decals.
11/12/2013 560-483M
2 8323-8560FCC Great Plains Manufacturing, Inc.
Wear Protective Equipment
▲ Wear protective clothing and equipment.
▲ Wear clothing and equipment appropriate for the job. Avoid
loose-fitting clothing.
▲ Because prolonged exposure to loud noise can cause hear-
ing impairment or hearing loss, wear suitable hearing protection such as earmuffs or earplugs.
▲ Because operating equipment safely requires your full
attention, avoid wearing entertainment headphones while
operating machinery.
Handle Chemicals Properly
Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property.
▲ Read and follow chemical manufacturer’s instructions.
▲ Wear protective clothing.
▲ Handle all chemicals with care.
▲ Avoid inhaling smoke from any type of chemical fire.
▲ Store or dispose of unused chemicals as specified by chemi-
cal manufacturer.
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the skin,
causing serious injury.
▲ Avoid the hazard by relieving pressure before disconnecting
hydraulic lines.
▲ Use a piece of paper or cardboard, NOT BODY PARTS, to
check for suspected leaks.
▲ Wear protective gloves and safety glasses or goggles when
working with hydraulic systems.
▲ If an accident occurs, seek immediate medical assistance
from a physician familiar with this type of injury.
Use Safety Lights and Devices
Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.
▲ Use flashing warning lights and turn signals whenever driv-
ing on public roads.
Use lights and devices provided with implement
560-483M 11/12/2013
Great Plains Manufacturing, Inc. Important Safety Information 3
Keep Riders Off Machinery
Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.
▲ Never allow children to operate equipment.
▲ Keep all bystanders away from machine during operation.
Transport Machinery Safely
Maximum transport speed for implement is 20 mph (32
kph), 13 mph (22 kph) in turns. Some rough terrains
require a slower speed. Sudden braking can cause a
towed load to swerve and upset.
▲ Do not exceed 20 mph. Never travel at a speed which does
not allow adequate control of steering and stopping. Reduce
speed if towed load is not equipped with brakes.
▲ Comply with state and local laws.
▲ Do not tow an implement that, when fully loaded, weighs
more than 1.5 times the weight of towing vehicle.
▲ Carry reflectors or flags to mark Field Cultivator in case of
breakdown on the road.
▲ Keep clear of overhead power lines and other obstructions
when transporting. Refer to transport dimensions under
“FC Specifications and Capacities” on page 23.
▲ Do not fold or unfold the Field Cultivator while the tractor
is moving
Shutdown and Storage
▲ Lower Field Cultivator, put tractor in park, turn off engine,
and remove the key.
▲ Secure Field Cultivator using blocks and supports provided.
▲ Detach and store machine in an area where children nor-
mally do not play.
Tire Safety
Tire changing can be dangerous and should be performed by trained personnel using correct tools and
equipment.
▲ When inflating tires, use a clip-on chuck and extension hose
long enough for you to stand to one side–not in front of or
over tire assembly. Use a safety cage if available.
▲ When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.
11/12/2013 560-483M
4 8323-8560FCC Great Plains Manufacturing, Inc.
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.
▲ Work in a clean, dry area.
▲ Lower the machine, put tractor in park, turn off engine,
and remove key before performing maintenance.
▲ Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on machine.
▲ Inspect all parts. Make sure parts are in good condition
and installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from machine before
operation.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
▲ Be familiar with all machine functions.
▲ Operate machinery from the driver’s seat only.
▲ Do not leave Field Cultivator unattended with tractor
engine running.
▲ Do not stand between the tractor and machine during hitch-
ing.
▲ Keep hands, feet and clothing away from power-driven
parts.
▲ Wear snug-fitting clothing to avoid entanglement with mov-
ing parts.
▲ Watch out for wires, trees, etc., when folding and raising
machine. Make sure all persons are clear of working area.
560-483M 11/12/2013
Great Plains Manufacturing, Inc. Important Safety Information 5
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On the back of the center wing stop.;
1 total
838-615C
Amber Reflectors
Two on light bracket and two on center brace bar. Two on
center frame.Two on rear of finishing attachment (not
shown), visible from side while folded for transport;
8 total
417189
41722
11/12/2013 560-483M
6 8323-8560FCC Great Plains Manufacturing, Inc.
41718
838-614C
Red Reflectors
On rear of light brackets (top);.
2 total
838-603C
Orange Reflectors
On rear of light brackets (bottom);
2 total
41718
838-598C Caution: Read Operator’s Manual
On front of hitch;
1 total
560-483M 11/12/2013
41720
Great Plains Manufacturing, Inc. Important Safety Information 7
838-599C Danger: Electrocution Hazard
Front side of center wing brace (left side);
1 total
41721
838-600C Danger: Crushing Hazard
On front (middle) of hitch;
1 total
838-602C Warning: Overhead Wing Hazard
On outside center of center and wing frames (both
sides);
4 total 8323, 8328, 8332 & 8336
6 total 5539, 8544, 8548, 8551, 8556 & 8560
41720
41722
11/12/2013 560-483M
Loading...