Great Plains 6328 User Manual
Table of Contents Part Number Index
Parts Manual
Field Cultivator, Floating Hitch
Series VII 6113, 6116, 6318,
6320, 6323, 6325 & 6328
Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
00324
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2009 Printed 01/16/09 560-204P
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................4
Using This Manual...............................................................4
Manual Replacement Information.......................................4
Manual Revisions................................................................4
Touch-up Paint....................................................................4
Hardware Legend................................................................5
Replacement Hardware......................................................5
Serial Numbers...................................................................5
Part Number Service Coding..............................................5
Section 2: Frames..........................................................6
Center Frame Assembly......................................................6
Floating Hitch Level Bar Assembly......................................8
Caster Wheel Linkage And Hitch Assembly......................10
6113-6116 Bolt On Wing Assembly..................................12
6318-6328 Wing Assembly...............................................14
Lights.................................................................................16
Section 3: Transport....................................................18
Center Walking Beam Assembly.......................................18
6318 & 6320 Wing Transpor t Assembly............................20
Wing Walking Beam Assembly..........................................22
6-Bolt Hub & Spindle Assembly........................................24
Caster Wheel Assembly....................................................26
Section 4: Hydraulics..................................................28
Hydraulic Depth Control Assembly (S/N 1225CC-)...........28
Hydraulic Depth Control Assembly (S/N 1226CC+)..........30
Hydraulic Layout, Floating Hitch (S/N 1211CC-)...............32
Hydraulic Layout, Floating Hitch (S/N 1212CC+)..............36
Hydraulic Details, Floating Hitch.......................................38
Midway Hydraulic Cylinder (810-138C).............................40
Midway Hydraulic Cylinder (810-477C).............................42
Midway Hydraulic Cylinder (810-478C).............................44
Midway Hydraulic Cylinder (810-479C).............................46
Midway Hydraulic Cylinder (810-480C).............................48
Midway Hydraulic Cylinder (810-483C).............................50
Midway Hydraulic Cylinder (810-484C).............................52
Midway Hydraulic Cylinder (810-485C).............................54
Section 5: Shanks........................................................56
Regular Magnum Shank Assembly (S/N 1129CC-)..........56
Heavy-Duty Magnum Shank Assembly (S/N 1130CC+)....58
Regular K-Flex Shank Assembly.......................................60
Heavy K-Flex Shank Assembly.........................................62
Section 6: Decals.........................................................64
Decals...............................................................................64
Section 7: Attachments...............................................66
S3T, S4T & S5T Spike Drag Assembly.............................66
Reel Following S3T Spike Assembly.................................68
S4T Spike Drag High Residue Assembly..........................70
CH3A & CH4A Coil Tine Assembly...................................72
Reel Following CH3A Coil Tine Assembly.........................74
CH3B & CH4B Coil Tine Assembly...................................76
EZ Hitch............................................................................78
Extended EZ Hitch............................................................80
EZ Hitch 80 Wide Extended..............................................82
EZ Hitch Special Extended...............................................84
Rear Hitch Accessory Mount Kit.......................................86
Part Number Index.......................................................88
© Copyright 2009 All rights reserved Printed 01/16/09
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
560-204P - 2 - 01/16/09
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
6
6-Bolt Hub & Spindle Assembly...................................24
6113-6116 Bolt On Wing Assembly.............................12
6318 & 6320 Wing Transpor t Assembly.......................20
6318-6328 Wing Assembly..........................................14
C
Caster Wheel Assembly...............................................26
Caster Wheel Linkage And Hitch Assembly.................10
Center Frame Assembly.................................................6
Center Walking Beam Assembly..................................18
CH3A & CH4A Coil Tine Assembly..............................72
CH3B & CH4B Coil Tine Assembly..............................76
D
Decals..........................................................................64
E
Extended EZ Hitch.......................................................80
EZ Hitch.......................................................................78
EZ Hitch 80 Wide Extended.........................................82
EZ Hitch Special Extended..........................................84
F
Floating Hitch Level Bar Assembly.................................8
Regular Magnum Shank Assembly (S/N 1129CC-).....56
S
S3T, S4T & S5T Spike Drag Assembly........................66
S4T Spike Drag High Residue Assembly.....................70
W
Wing Walking Beam Assembly.....................................22
H
Heavy K-Flex Shank Assembly....................................62
Heavy-Duty Magnum Shank Assembly (S/N
1130CC+)..............................................................58
Hydraulic Depth Control Assembly (S/N 1225CC-)......28
Hydraulic Depth Control Assembly (S/N 1226CC+).....30
Hydraulic Details, Floating Hitch..................................38
Hydraulic Layout, Floating Hitch (S/N 1211CC-)..........32
Hydraulic Layout, Floating Hitch (S/N 1212CC+).........36
L
Lights............................................................................16
M
Midway Hydraulic Cylinder (810-138C)........................40
Midway Hydraulic Cylinder (810-477C)........................42
Midway Hydraulic Cylinder (810-478C)........................44
Midway Hydraulic Cylinder (810-479C)........................46
Midway Hydraulic Cylinder (810-480C)........................48
Midway Hydraulic Cylinder (810-483C)........................50
Midway Hydraulic Cylinder (810-484C)........................52
Midway Hydraulic Cylinder (810-485C)........................54
R
Rear Hitch Accessory Mount Kit..................................86
Reel Following CH3A Coil Tine Assembly....................74
Reel Following S3T Spike Assembly............................68
Regular K-Flex Shank Assembly..................................60
01/16/09 - 3 - 560-204P
Table of Contents Part Number Index
560-204P - 4 - 01/16/09
Table of Contents Part Number Index
01/16/09 - 5 - 560-204P
Table of Contents Part Number Index
Center Frame Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00325
560-204P - 6 - 01/16/09
Table of Contents Part Number Index
Section 2: Frames
Center Frame Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00325
CENTER FRAME560-025H1.
Rev. 1TORQUE TUBE 6113FC-6328FC VII560-211H2.
CENTER BRACE BAR560-026H3.
Models 6318 - 6328CENTER FOLD BRACKET560-014H4.
Models 6318 - 6328CENTER WING STOP560-038H5.
Models 6318 - 6328CYLINDER REST PAD 3560-001H6.
PIN HINGE 1 1/4X6 HRDN PLT805-378C7.
PIN HINGE 1 1/4X7 HRDN PLT805-349C8.
Rev. 2HHCS 3/8-16X2 1/4 GR8 SP THD802-623C9.
Rev. 1Changed to 802-623CHHCS 3/8-16X2 1/2 GR5802-114C9.
Rev. 2NUT HEX TOP LOCK 3/8-16 PLT803-123C10.
Rev. 1Changed to 803-123CNUT LOCK 3/8-16 NYLON INSERT803-078C10.
HHCS 3/4-10X2 1/2 GR5802-212C11.
WASHER LOCK SPRING 3/4 PLT804-023C12.
NUT HEX 3/4-10 PLT803-027C13.
HHCS 3/4-10X2 GR5802-064C14.
U-BOLT 1/2-13X3 1/32X5806-189C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
4 X 4 K-FLEX STUB560-023H18.
HHCS 1/2-13X5 1/2 GR5802-046C19.
Models 6318 - 6328PIN HITCH 1/2X4 1/2 W/KEEPER805-379C20.
PLASTIC END CAP - 4X3X1/4 TUBE817-585C21.
1 1/4 X 1 X 3/4 HDR BUSHING890-143C22.
PART - SMV MOUNTING BRACKET550-071D23.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C24.
WASHER LOCK SPRING 5/8 PLT804-022C25.
NUT HEX 5/8-11 PLT803-021C26.
SMV SIGN POLE BRKT W/BOLTS890-823C27.
WASHER FLAT 7/16 USS PLT804-204C28.
WASHER LOCK SPRING 5/16 PLT804-009C29.
SMV SIGN POLE W/SLIDE890-822C30.
DECAL SLOW MOVING-GALV. BACKED818-055C31.
SCREW PAN HD 1/4-20 X 3/4801-005C32.
WASHER LOCK SPRING 1/4 PLT804-006C33.
NUT-HEX 1/4-20 PLT803-006C34.
01/16/09 - 7 - 560-204P
Table of Contents Part Number Index
Floating Hitch Level Bar Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00326
560-204P - 8 - 01/16/09
Table of Contents Part Number Index
Section 2: Frames
Floating Hitch Level Bar Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00326
LEVEL BAR 6300FC FLT HTCH575-563H1.
LEVEL-BAR H-BRACKET550-003H2.
CYLINDER MOUNT BRACKET575-565H3.
LEVELING LINK MOUNTING TUBE RH575-551H4.
LEVELING LINK MOUNTING TUBE LH575-552H5.
LEVEL BAR FLTING HITCH OPTION575-553H6.
LEVELING LINK575-557H7.
Includes items 9 thru 13TURNBUCKLE ASSEMBLY575-541S8.
TURNBUCKLE TUBE575-530H9.
TURNBUCKLE CLEVIS575-564H10.
NUT HEX JAM 1 1/2-6 PLT803-063C11.
Rev. 2TURNBUCKLE CLEVIS END (RH THD)575-528V12.
Rev. 1Replaced by 575-528VRPBY 575-528V575-528H12.
NUT HEX JAM 1 1/2-6 PLT803-063C13.
HHCS 1-8X9 GR8 PLT802-783C14.
NUT HEX LOCK 1-8 PLT803-316C15.
PIN 1 X 4 1/2 USEABLE805-360C16.
WASHER MACH 1.5X1.00X.075804-192C17.
PIN COTTER 3/16 X 2805-058C18.
PIN CLEVIS 1 X 3 3/8 USABLE805-351C19.
Rev. 2HHCS 1-8X6 GR8 PLT SPCL THREAD802-715C20.
Rev. 1Replaced by 802-715CREP BY 802-715C575-163D20.
NUT HEX 1-8 NYLON INSERTPLT803-038C21.
HHCS 3/4-10X6 GR5802-070C22.
NUT LOCK 3/4-10 PLT803-026C23.
HHCS 3/4-10X2 GR5802-064C24.
WASHER LOCK SPRING 3/4 PLT804-023C25.
NUT HEX 3/4-10 PLT803-027C26.
U-BOLT 5/8-11X4 1/32X4 1/4806-179C27.
WASHER LOCK SPRING 5/8 PLT804-022C28.
NUT HEX 5/8-11 PLT803-021C29.
REBOUND VALVE SHORT MOUNT BRKT575-041D30.
REBOUND VALVE MOUNT PLATE560-035D31.
HHCS 1/2-13X4 1/2 GR5802-413C32.
WASHER LOCK SPRING 1/2 PLT804-015C33.
NUT HEX 1/2-13 PLT803-020C34.
PIN HITCH 3/4 X 3805-364C35.
WASHER FLAT 1 USS PLT804-028C36.
BUSHING 1 1/4X1X1/2 HRD ST SLT890-836C37.
BUSHING 1 1/4X1X3/4 HRD ST SLT890-835C38.
01/16/09 - 9 - 560-204P
Table of Contents Part Number Index
Caster Wheel Linkage And Hitch Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00327
560-204P - 10 - 01/16/09
Table of Contents Part Number Index
Section 2: Frames
Caster Wheel Linkage And Hitch Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00327
CENTER FRAME TRUSS575-550H1.
GAUGE WHEEL ARM MOUNT575-558H2.
GAUGE WHEEL ARM RH (BOTTOM)575-555H3.
GAUGE WHEEL ARM LH (BOTTOM)575-556H4.
GAUGE WHEEL ARM (TOP)575-554H5.
Rev. 1HITCH POLE FLOATING 6300FC VII575-531H6.
HITCH CLEVIS/TONGUE550-028H7.
HITCH BOLT 11550-037H8.
Use as neededWASHER MACH 2.25 X 1.50 X 10GA804-063C9.
NUT HEX SLOTTED 1 1/2-6 PLT803-301C10.
PIN COTTER 1/4 X 3 PLT805-115C11.
HOSE SUPPORT550-001H12.
PIN COTTER 1/8 X 1 1/2805-225C13.
Rev. 2SCREW JACK 30' DRILLS890-007C14.
Rev. 1REPL BY 890-007C890-780C14.
Rev. 2HHCS 1 1/4-7X7 GR8 PLT802-795C15.
Rev. 1Changed to 802-795CHHCS 1 1/4-7X6 1/2 GR8 PLT802-784C15.
NUT HEX TOP LOCK 1 1/4-7 PLT803-314C16.
1 x 5 1/2" SP GREASABLE BOLT575-035D17.
NUT HEX 1-8 NYLON INSERTPLT803-038C18.
Rev. 2Required with wider clevisPIN CLEVIS 1 X 3 3/8 USABLE805-351C19.
Rev. 1Changed to 805-351CPIN CLEV 1X2 3/8 USE MUSHRM HD805-352C19.
PIN COTTER 3/16 X 2805-058C20.
WASHER MACH 1.5X1.00X.075804-192C21.
U-BOLT 3/4-10X3 1/32X5 3/8806-200C22.
WASHER LOCK SPRING 3/4 PLT804-023C23.
NUT HEX 3/4-10 PLT803-027C24.
HHCS 3/4-10X2 GR5802-064C25.
HHCS 5/8-11X1 1/2 GR5802-051C26.
WASHER LOCK SPRING 5/8 PLT804-022C27.
NUT HEX 5/8-11 PLT803-021C28.
MANUAL PAK TUBE817-609C29.
CLAMP WORM DRIVE (3"-5")800-231C30.
1 1/4 X 1 X 3/4 HDR BUSHING890-143C31.
SAFETY CHAIN 16100 LB890-824C32.
SAFETY CHAIN SPACER576-048D33.
WASHER FLAT 1 1/2 SAE PLT804-071C34.
01/16/09 - 11 - 560-204P
Table of Contents Part Number Index
6113-6116 Bolt On Wing Assembly
(Applies to 6113FC F H, 6116FC F H only)
00328
560-204P - 12 - 01/16/09
Table of Contents Part Number Index
6113-6116 Bolt On Wing Assembly
(Applies to 6113FC F H, 6116FC F H only)
Image No.dwg00328
18" WING RIGHT HAND560-041H1.
18" WING BRACE560-071H2.
HHCS 1-8X6 GR5802-357C5.
NUT HEX 1-8 NYLON INSERTPLT803-038C6.
HHCS 3/4-10X2 GR5802-064C7.
HHCS 3/4-10X3 GR5802-383C8.
WASHER LOCK SPRING 3/4 PLT804-023C9.
U-BOLT 5/8-11 X 3 1/32 X 5 1/2806-079C10.
WASHER LOCK SPRING 5/8 PLT804-022C11.
NUT HEX 5/8-11 PLT803-021C12.
HHCS 5/8-11X1 1/2 GR5802-051C13.
Section 2: Frames
RevisionCommentsPart DescriptionPart No.Ref.
(shown)18" WING LEFT HAND560-042H2.
Model 611611" BOLT ON STUB560-020H3.
Model 61165" BOLT-ON STUB560-019H4.
01/16/09 - 13 - 560-204P
Table of Contents Part Number Index
6318-6328 Wing Assembly
(Applies to 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00329
560-204P - 14 - 01/16/09
Table of Contents Part Number Index
6318-6328 Wing Assembly
(Applies to 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
Image No.dwg00329
Model 6318 & 63204' WING RIGHT HAND560-039H1.
Model 6318 & 63204' WING LEFT HAND560-040H1.
Model 6323 & 63256 1/2' WING RIGHT HAND560-029H1.
Model 6323 & 63256 1/2' WING LEFT HAND560-030H1.
Model 63289' WING RIGHT HAND560-027H1.
Model 6328 (shown)9' WING LEFT HAND560-028H1.
Model 6318 & 63204' WING BRACE560-033H2.
Model 6323 & 63256 1/2' WING BRACE560-031H2.
Model 6328 (shown)9' WING BRACE560-032H2.
WHEEL BRACKET RH575-687H3.
(shown)WHEEL BRACKET LH575-688H3.
ROCKER BRACKET560-011H4.
Model 6328 onlyCONNECTING LINK (68 3/8)560-004H5.
Model 6328 onlyCONNECTING LINK BRACKET560-003H6.
7" OFFSET STUB560-044H7.
PIN HINGE 1 1/4X6 HRDN PLT805-378C8.
HHCS 1-8X6 GR5802-357C11.
NUT HEX 1-8 NYLON INSERTPLT803-038C12.
PIN CLEVIS 1 X 3 3/8 USABLE805-351C14.
WASHER MACH 1.5X1.00X.075804-192C15.
PIN COTTER 3/16 X 2805-058C16.
HHCS 1-8X3 GR5802-368C17.
NUT HEX LOCK 1-8 PLT803-316C18.
HHCS 3/4-10X3 GR5802-383C19.
WASHER LOCK SPRING 3/4 PLT804-023C20.
NUT HEX 3/4-10 PLT803-027C21.
HHCS 3/4-10X2 GR5802-064C22.
U-BOLT 5/8-11 X 4 1/32 X 4806-106C23.
WASHER LOCK SPRING 5/8 PLT804-022C24.
NUT HEX 5/8-11 PLT803-021C25.
U-BOLT 1/2-13X3 1/32X5806-189C26.
WASHER LOCK SPRING 1/2 PLT804-015C27.
NUT HEX 1/2-13 PLT803-020C28.
Model 6320 & 632511" BOLT ON STUB560-020H29.
Model 6320 & 63255" BOLT-ON STUB560-019H30.
HHCS 5/8-11X1 1/2 GR5802-051C31.
GREASE ZERK STRAIGHT 1/4-28800-001C32.
BUSHING CYL 1 1/4 X 1 X 1890-005C33.
Section 2: Frames
RevisionCommentsPart DescriptionPart No.Ref.
Rev. 2HHCS 3/8-16X2 1/4 GR8 SP THD802-623C9.
Rev. 1Changed to 802-623CHHCS 3/8-16X2 1/2 GR5802-114C9.
Rev. 2NUT HEX TOP LOCK 3/8-16 PLT803-123C10.
Rev. 1Changed to 803-123CNUT LOCK 3/8-16 NYLON INSERT803-078C10.
Rev. 2ROCKER 5 3/4" CENTER TO CENTER560-176D13.
Rev. 1Changed to 560-176DROCKER, 6" CENTER TO CENTER560-177D13.
01/16/09 - 15 - 560-204P
Table of Contents Part Number Index
Lights
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
01261
560-204P - 16 - 01/16/09
Table of Contents Part Number Index
Section 2: Frames
Lights
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg01261
Models 6113 & 6116AG LIGHT WIRING HARNESS-25'890-317C1.
Models 6113 & 6116LIGHT HARNESS, 10' WISHBONE890-390C2.
Models 6113 & 6116DUAL AG LIGHTS RH890-312C3.
Models 6113 & 6116DUAL AG LIGHTS LH890-311C4.
Models 6113 & 6116MAGNET ROUND W/SCREW (4 EA)890-827C5.
Includes items 1 thru 5LIGHT KIT890-821C6.
Models 6318-6328LEAD HARNESS W/TRAC HKUP 25FT890-831C7.
Models 6318-6328WISHBONE WIRING HARNESS(SHORT)890-830C8.
Models 6318-6328LIGHT ONE-WAY RED890-828C9.
Models 6318-6328LIGHT TWO-WAY AMBER890-829C10.
Includes Items 7 thru 10SAFETY LIGHT KIT (LONG LEAD)890-826C11.
Models 6318-6328LIGHT MOUNT BRKT-WING STOP LH560-152H12.
Models 6318-6328LIGHT MOUNT BRKT-WING STOP RH560-065H13.
Models 6318-6328SCREW SET SQ HD 1/2-13X1 GR5801-054C14.
Models 6318-6328PART - LIGHT KIT550-124D15.
Models 6318-6328U-BOLT 5/8-11X4 1/32X4 1/4806-179C16.
Models 6318-6328NUT HEX 5/8-11 PLT803-021C17.
Models 6318-6328WASHER LOCK SPRING 5/8 PLT804-022C18.
01/16/09 - 17 - 560-204P
Table of Contents Part Number Index
Center Walking Beam Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00280
560-204P - 18 - 01/16/09
Table of Contents Part Number Index
Section 3:Transport
Center Walking Beam Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00280
Pivot Spindle, 2 x 8 1/16550-015D1.
Seal, (CR16286)816-398C2.
Inner Cone, (JL69349)822-198C3.
Inner Cup, (JL69310)822-197C4.
Heavy Beam560-035H5.
Rev. 2Grease Zerk, 1/4-28 Thread Forming800-080C6.
Rev. 1Changed to 800-080CGrease Zerk, 1/4 Straight800-001C6.
Outer Cup, (LM67010)822-020C7.
Outer Cone, (LM67048)822-021C8.
Washer, Spindle 7/8804-055C9.
Cotter Pin, 5/32 x 1 1/2805-089C10.
Slotted Hex Nut, 7/8-14803-029C11.
Dust Cap890-781C12.
Rev. 2Purchased CompleteHub 6-Bolt Spindle 2X15.5 888815-217C13.
Rev. 1See Hub & Spindle AssemblyReplaced by 815-217C560-135S13.
Clevis Pin, 5/16 x 3 w/cotter805-324C14.
Cotter Pin, 1/8 x 1805-363C15.
Includes items 1 thru 15Walking Beam Assembly560-136L16.
Rim, 15 x 6, 6-Bolt814-220C17.
Tire, 9.5L x 15, 8 ply814-011C18.
Includes items 17 & 18Tire/Wheel Assembly, 9.5L x 15, 8 ply814-230C19.
Lug Bolt, 1/2-20 x 1 1/4, Gr.5802-632C20.
01/16/09 - 19 - 560-204P
Table of Contents Part Number Index
6318 & 6320 Wing Transport Assembly
(Applies to 6318FC F H, 6320FC F H only)
00281
560-204P - 20 - 01/16/09
Table of Contents Part Number Index
6318 & 6320 Wing Transport Assembly
(Applies to 6318FC F H, 6320FC F H only)
Image No.dwg00281
AXLE SPINDLE 2X14 (Q888)570-058D1.
SEAL (CR16286)816-398C2.
SEAL SLEEVE (CR081071)816-396C3.
INNER CONE, JL69349822-198C4.
INNER CUP JL69310822-197C5.
HUB 888 W/CUPS 6"-BOLTS 6 BC815-142C7.
BEARING CUP LM-67010822-020C8.
BEARING CONE LM-67048822-021C9.
WASHER SPINDLE - 7/8804-055C10.
PIN COTTER 5/32 X 1 1/2 LONG805-089C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
GREASE CAP 2.448X1.12X.25890-781C13.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C14.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C16.
PIN COTTER 1/8 X 1805-363C17.
WHEEL 15X6 6 BOLT WHITE814-220C18.
TIRE 9.5 L X 15 8 PLY814-011C19.
Section 3:Transport
RevisionCommentsPart DescriptionPart No.Ref.
Rev. 2REP BY 800-130C800-221C6.
Rev. 1Changed to 800-221CGREASE ZERK STRAIGHT 1/4-28800-001C6.
Rev. 2Purchased CompleteHUB 6-BOLT SPINDLE 2X14LH 888815-215C15.
Rev. 1Includes items 1 thru 14RPBY 815-215C570-214S15.
Includes items 18 & 19TIRE/WHEEL 9.5LX15 8 PLY WHITE814-230C20.
01/16/09 - 21 - 560-204P
Table of Contents Part Number Index
Wing Walking Beam Assembly
(Applies to 6323FC F H, 6325FC F H, 6328FC F H only)
00282
560-204P - 22 - 01/16/09
Table of Contents Part Number Index
Wing Walking Beam Assembly
(Applies to 6323FC F H, 6325FC F H, 6328FC F H only)
Image No.dwg00282
PIVOTSPINDLE 2X8 1/16550-015D1.
SEAL (CR16286)816-398C2.
SEAL SLEEVE (CR081071)816-396C3.
INNER CONE, JL69349822-198C4.
INNER CUP JL69310822-197C5.
WALKING BEAM560-035H6.
BEARING CUP LM-67010822-020C8.
BEARING CONE LM-67048822-021C9.
WASHER SPINDLE - 7/8804-055C10.
PIN COTTER 5/32 X 1 1/2 LONG805-089C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
GREASE CAP 2.448X1.12X.25890-781C13.
RPBY 815-216C550-005S14.
RPBY 815-214C550-007S15.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C16.
PIN COTTER 1/8 X 1805-363C17.
WHEEL 15X6 6 BOLT WHITE814-220C19.
TIRE 9.5 L X 15 8 PLY814-011C20.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C22.
Section 3:Transport
RevisionCommentsPart DescriptionPart No.Ref.
Rev. 2GREASE ZERK 1/4-28 THD FORMING800-080C7.
Rev. 1Changed to 800-080CGREASE ZERK STRAIGHT 1/4-28800-001C7.
Rev. 2Purchased CompleteHUB 6-BOLT SPINDLE 2X14HH 888815-216C14.
Rev. 1Front Side of Tandem.See Hub &
Spindle Assembly
Rev. 2Purchased CompleteHUB 6-BOLT SPINDLE 2X13HH 888815-214C15.
Rev. 1Back Side of Tandem. See Hub &
Spindle Assembly
Includes items 1 thru 17WALKING BEAM HUB ASSEMBLY560-137L18.
Includes items 19 & 20TIRE/WHEEL 9.5LX15 8 PLY WHITE814-230C21.
01/16/09 - 23 - 560-204P
Table of Contents Part Number Index
6-Bolt Hub & Spindle Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00024
560-204P - 24 - 01/16/09
Table of Contents Part Number Index
Section 3:Transport
6-Bolt Hub & Spindle Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00024
Center Walking TandemAXLE SPINDLE 2X15 1/2 (Q888)550-019D1.
6323 - 6328 Wing TandemAXLE SPINDLE 2X14 (Q888)550-014D1.
6323 - 6328 Wing TandemAXLE SPINDLE 2X13 (Q888)550-017D1.
SEAL (CR16286)816-398C2.
SEAL SLEEVE (CR081071)816-396C3.
INNER CONE, JL69349822-198C4.
INNER CUP JL69310822-197C5.
Rev. 2REP BY 800-130C800-221C6.
Rev. 1Changed to 800-221CGREASE ZERK STRAIGHT 1/4-28800-001C6.
HUB 888 W/CUPS 6-BOLTS 6 BC"815-142C7.
BEARING CUP LM-67010822-020C8.
BEARING CONE LM-67048822-021C9.
WASHER SPINDLE - 7/8804-055C10.
PIN COTTER 5/32 X 1 1/2 LONG805-089C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
GREASE CAP 2.448X1.12X.25890-781C13.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C14.
Rev. 2Includes items 1 thru 14HUB 6-BOLT SPINDLE 2X15.5 888815-217C15.
Rev. 1RPBY 815-217C560-135S15.
Rev. 2(6323 - 6328) items 1 thru14HUB 6-BOLT SPINDLE 2X14HH 888815-216C15.
Rev. 1RPBY 815-216C550-005S15.
Rev. 2(6323 - 6328) items 1 thru14HUB 6-BOLT SPINDLE 2X13HH 888815-214C15.
Rev. 1RPBY 815-214C550-007S15.
01/16/09 - 25 - 560-204P
Table of Contents Part Number Index
Caster Wheel Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00012
560-204P - 26 - 01/16/09
Table of Contents Part Number Index
Section 3:Transport
Caster Wheel Assembly
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg00012
GAUGE WHEEL PIVOT MOUNT575-535H1.
1 x 5 1/2" SP GREASABLE BOLT575-035D2.
NUT HEX 1-8 NYLON INSERTPLT803-038C3.
Rev. 2GAUGE WHEEL ARM LH575-534H4.
Rev. 1GAUGE WHEEL ARM RH575-533H4.
CASTER GAGE WHEEL TOP COLLAR575-539H5.
SPRNG COM 1 13/16ODX3/8WX2 3/4807-226C6.
CASTER GAGE WHEEL SPRING COVER575-540H7.
WASHER FLAT 1 USS PLT804-028C8.
NUT HEX 1-8 PLT803-031C9.
NUT HEX JAM 1-8 PLT803-030C10.
PIN CLEVIS 5/16X2 13/16 USABLE805-324C11.
PIN COTTER 1/8 X 1805-363C12.
90LE SPINDLE 2X12 (Q888)560-178D13.
SEAL (CR16286)816-398C14.
SEAL SLEEVE (CR081071)816-396C15.
INNER CONE, JL69349822-198C16.
INNER CUP JL69310822-197C17.
Rev. 2REP BY 800-130C800-221C18.
Rev. 1Changed to 800-221CGREASE ZERK STRAIGHT 1/4-28800-001C18.
HUB 888 W/CUPS 6-BOLTS 6" BC815-142C19.
BEARING CUP LM-67010822-020C20.
BEARING CONE LM-67048822-021C21.
WASHER SPINDLE - 7/8804-055C22.
PIN COTTER 5/32 X 1 1/2 LONG805-089C23.
NUT HEX SLOTTED 7/8-14 PLT803-029C24.
GREASE CAP 2.448X1.12X.25890-781C25.
WHEEL BOLT 1/2-20X1 1/4 GR5802-632C26.
Rev. 2Purchased CompleteHUB 6-BOLT SPINDLE 2X12 888815-212C27.
Rev. 1Includes items 12 thru 25RPBY 815-212C560-080S27.
WHEEL 15X8 6 BOLT WHITE814-221C28.
TIRE 11L-15 X 8 PLY814-038C29.
Includes items 27 & 28TIRE/WHL 11LX15 8PLY 6BLT WHT814-232C30.
Rev. 2GREASE ZERK 1/4-28 THD FORMING800-080C31.
Rev. 1Changed to 800-080CGREASE ZERK STRAIGHT 1/4-28800-001C31.
Included in 575-535HBUSHING 1 1/4X1X1/2 HRD ST SLT890-836C32.
01/16/09 - 27 - 560-204P
Table of Contents Part Number Index
Hydraulic Depth Control Assembly (S/N 1225CC-)
(Applies to 6113FC F H, 6116FC F H, 6318FC F H, 6320FC F H, 6323FC F H, 6325FC F H, 6328FC F H only)
00330
560-204P - 28 - 01/16/09
Loading...