Page 1
Table of Contents Part Number Index
Parts Manual
30' 3-Section Folding Drill
3S-3000 & 3S-3000F
1996+
Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
15485
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2014 Printed 01/30/14 195-110P
Page 2
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................6
Using This Manual...............................................................6
Manual Replacement Information.......................................6
Manual Revisions................................................................6
Touch-up Paint....................................................................6
Hardware Legend................................................................7
Replacement Hardware......................................................7
Serial Numbers...................................................................7
Part Number Service Coding..............................................7
Tongue And Mainframe.................................................8
Hitch To Tongue...................................................................8
Transport Hook To Tongue.................................................10
Mainframe To Tongue........................................................12
Transport Axle.............................................................14
Transport Axle To Mainframe.............................................14
Transpor t Tires & Hub.......................................................16
Tool Bars......................................................................18
Toolbar To Mainframe........................................................18
Toolbar Pivots To Toolbars (S/N S1194-)...........................20
Toolbar Pivots To Box Frames...........................................22
Box and Box Frames...................................................24
Center Box And Center Frame To Mainframe...................24
Center Box And Center Frame To Mainframe Fertilizer.....26
Wing Box To Wing Frame..................................................28
Wing Box To Wing Frame Fertilizer...................................30
Lid To Box..........................................................................32
Lid To Box Fertilizer...........................................................34
Box Divider Fertilizer.........................................................36
Seed/Fertilizer Flap (195-177S)........................................38
Spill Flap Fertilizer (195-176S)..........................................40
Fertilizer Tray To Box.........................................................42
Fertilizer Tray.....................................................................44
Seed Level Indicator..........................................................46
Lights (S/N S2966-)...........................................................48
Lights LED (S/N S2067+)..................................................50
Weight Bracket (S/N S1869-)............................................52
Weight Bracket (S/N S1870+)...........................................54
Point Row Control Box With Cables..................................56
Walkboard, Step And Parking Stand To Box Frame (S/N
S2030-).......................................................................58
Walkboard, Step And Parking Stand To Box Frame (S/N
S2031+)......................................................................60
Right Hand And Left Hand Subframes To Box Frames.....62
Center Subframe To Box Frame........................................64
Feeder Cup Channels.................................................66
Seed Rate Adjustment Handle..........................................66
6" Feeder Cup Spacing.....................................................68
7 1/2" Feeder Cup Spacing...............................................70
10" Feeder Cup Spacing...................................................72
Vansco Shaft Monitor (Option)..........................................74
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel
116-283A)...................................................................76
Gauge Wheels..............................................................78
Single Gauge Wheel.........................................................78
Dual Gauge Wheel............................................................80
Drives...........................................................................83
Right Hand Drive (S/N S1021-).........................................84
Right Hand Drive (S/N S1022 - S/N S1562).....................86
Right Hand Drive (S/N S1563+)........................................88
Right Hand Fertilizer (S/N S1562-)...................................90
Right Hand Fertilizer (S/N S1563+)..................................92
Right Hand Drive Fertilizer (Continued)............................94
Right Hand Drive Point Row (Option) (S/N S1562-)..........96
Right Hand Drive Point Row (Option) (S/N S1563+).........98
Center Drive....................................................................100
Center Drive (Continued) (S/N S1021-)..........................102
Center Drive (Continued) (S/N S1022 - S/N S1562).......104
Center Drive (Continued) (S/N S1563+).........................106
Center Drive Fertilizer (S/N S1562-)...............................108
Center Drive Fertilizer (S/N S1563+)..............................110
Center Drive Point Row (Option) (S/N S1562-)...............112
Center Drive Point Row (Option) (S/N S1563+)..............114
Left Hand Drive (S/N S1562-).........................................116
Left Hand Drive (S/N S1563+)........................................118
Left Hand Drive Fertilizer (S/N S1562-)..........................120
Left Hand Drive Fertilizer (S/N S1563+)..........................122
Fertilizer Drive Subassy (195-184S)...............................124
Clutch Linkage................................................................126
Jaw Clutch S/N 51021-....................................................128
Jaw Clutch S/N 51022+ (Includes Fertilizer Drills)..........130
Right Hand Wing Clutch Fertilizer (195-186K)................132
Left Hand Wing Clutch Fertilizer (195-187K)...................134
Openers......................................................................136
00 Series Long Arm Opener...........................................136
00 Series Short Ar m Opener..........................................140
Fertilizer Hose.................................................................142
5" & 6" Seed-Lok (Option) (122-193K & 122-266K)........144
Press Wheels.............................................................146
1" x 12" Double "V" Press Wheel....................................146
2" x 13" Single Press Wheel............................................148
3" x 13" Single Press Wheel............................................150
3" x 14" Peaked Single Press Wheel...............................152
4" x 12" Double Ribbed Single Press Wheel...................154
Hydraulics..................................................................156
Fold Hydraulics................................................................156
Transport Axle And Transport Hook Lift Hydraulics (S/N
S1283-).....................................................................158
© Copyright 2014 All rights reserved Printed 01/30/14
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
195-110P - 2 - 01/30/14
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
Page 3
Table of Contents Part Number Index
Table of Contents (continued)
Transport Axle And Transport Hook Lift Hydraulics (S/N
S1283+)...............................................................160
Opener Down Pressure Hydraulics (Closed Center) (S/N
S1699-)................................................................162
Opener Down Pressure Hydraulics (Closed Center) (S/N
S1700+)...............................................................164
Opener Down Pressure Hydraulics With Point Row
(Option) (S/N S1699-)..........................................166
Opener Down Pressure Hydraulics With Point Row
(Option) (S/N S1700+).........................................168
Opener Down Pressure Hydraulics (Open Center) (S/N
S1699-)................................................................170
Opener Down Pressure Hydraulics (Open Center) (S/N
S1700+)...............................................................172
Double Selector Valve Mounting................................174
Hydraulic Cylinder 2 x 8 x 1.12 (810-299C)...............176
Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................178
T ransport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................180
Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................182
Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 1.5
(810-298C)...........................................................184
Transport Axle Midwa y Hydraulic Cylinder 3.5 x 12 x 1.25
(810-316C)...........................................................186
Pressure Reducing Valve (810-301C)........................188
Manifold Block (810-371C) (Option)...........................190
Decals....................................................................192
Decal Placement........................................................192
Markers..................................................................194
Flat Fold Marker.........................................................194
Marker Disk And Hub (113-563S)..............................198
Single Marker Hydraulics...........................................200
Dual Markers Hydraulics............................................202
Midway Hydraulic Cylinder 2.5 x 20 x 1.12
(810-118C)...........................................................204
Monarch Hydraulic Cylinder 2.5 x 20 x 1.12
(810-118C)...........................................................206
Cross Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C).208
Double Selector Valve (810-274C).............................210
Sequence Valve (810-197C)......................................212
Small Seeds...........................................................214
Small Seeds Box To Frame........................................214
Small Seeds Box Components...................................216
Small Seeds Drive......................................................218
Part Number Index................................................220
01/30/14 - 3 - 195-110P
Page 4
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
0
00 Series Long Arm Opener...........................................136
00 Series Short Ar m Opener..........................................140
1
1" x 12" Double "V" Press Wheel....................................146
10" Feeder Cup Spacing...................................................72
2
2" x 13" Single Press Wheel............................................148
3
3" x 13" Single Press Wheel............................................150
3" x 14" Peaked Single Press Wheel...............................152
4
4" x 12" Double Ribbed Single Press Wheel...................154
5
5" & 6" Seed-Lok (Option) (122-193K & 122-266K)........144
6
6" Feeder Cup Spacing.....................................................68
Fertilizer Hose.................................................................142
Fertilizer Tray.....................................................................44
Fertilizer Tray To Box.........................................................42
Flat Fold Marker..............................................................194
Fold Hydraulics................................................................156
H
Hitch To Tongue...................................................................8
Hydraulic Cylinder 2 x 8 x 1.12 (810-299C)....................176
J
Jaw Clutch S/N 51021-....................................................128
Jaw Clutch S/N 51022+ (Includes Fertilizer Drills)..........130
L
Left Hand Drive (S/N S1562-).........................................116
Left Hand Drive (S/N S1563+)........................................118
Left Hand Drive Fertilizer (S/N S1562-)..........................120
Left Hand Drive Fertilizer (S/N S1563+)..........................122
Left Hand Wing Clutch Fertilizer (195-187K)...................134
Lid To Box..........................................................................32
Lid To Box Fertilizer...........................................................34
Lights (S/N S2966-)...........................................................48
Lights LED (S/N S2067+)..................................................50
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel
116-283A)...................................................................76
7
7 1/2" Feeder Cup Spacing...............................................70
B
Box Divider Fertilizer.........................................................36
C
Center Box And Center Frame To Mainframe...................24
Center Box And Center Frame To Mainframe Fertilizer.....26
Center Drive....................................................................100
Center Drive (Continued) (S/N S1021-)..........................102
Center Drive (Continued) (S/N S1022 - S/N S1562).......104
Center Drive (Continued) (S/N S1563+).........................106
Center Drive Fertilizer (S/N S1562-)...............................108
Center Drive Fertilizer (S/N S1563+)..............................110
Center Drive Point Row (Option) (S/N S1562-)...............112
Center Drive Point Row (Option) (S/N S1563+)..............114
Center Subframe To Box Frame........................................64
Clutch Linkage................................................................126
Cross Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C).....208
D
Decal Placement.............................................................192
Double Selector Valve (810-274C)..................................210
Double Selector Valve Mounting.....................................174
Dual Gauge Wheel............................................................80
Dual Markers Hydraulics.................................................202
F
Fertilizer Drive Subassy (195-184S)...............................124
M
Mainframe To Tongue........................................................12
Manifold Block (810-371C) (Option)................................190
Marker Disk And Hub (113-563S)...................................198
Midway Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C)...204
Monarch Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C).206
O
Opener Down Pressure Hydraulics (Closed Center) (S/N
S1699-).....................................................................162
Opener Down Pressure Hydraulics (Closed Center) (S/N
S1700+)....................................................................164
Opener Down Pressure Hydraulics (Open Center) (S/N
S1699-).....................................................................170
Opener Down Pressure Hydraulics (Open Center) (S/N
S1700+)....................................................................172
Opener Down Pressure Hydraulics With Point Row (Option)
(S/N S1699-).............................................................166
Opener Down Pressure Hydraulics With Point Row (Option)
(S/N S1700+)............................................................168
P
Point Row Control Box With Cables..................................56
Pressure Reducing Valve (810-301C).............................188
R
Right Hand And Left Hand Subframes To Box Frames.....62
Right Hand Drive (S/N S1021-).........................................84
Right Hand Drive (S/N S1022 - S/N S1562).....................86
Right Hand Drive (S/N S1563+)........................................88
195-110P - 4 - 01/30/14
Page 5
Table of Contents Part Number Index
Alphabetized Table of Contents (continued)
Right Hand Drive Fertilizer (Continued).......................94
Right Hand Drive Point Row (Option) (S/N S1562-).....96
Right Hand Drive Point Ro w (Option) (S/N S1563+).....98
Right Hand Fertilizer (S/N S1562-)...............................90
Right Hand Fertilizer (S/N S1563+)..............................92
Right Hand Wing Clutch Fertilizer (195-186K)...........132
S
Seed Level Indicator.....................................................46
Seed Rate Adjustment Handle.....................................66
Seed/Fertilizer Flap (195-177S)...................................38
Sequence Valve (810-197C)......................................212
Single Gauge Wheel....................................................78
Single Marker Hydraulics...........................................200
Small Seeds Box Components...................................216
Small Seeds Box To Frame........................................214
Small Seeds Drive......................................................218
Spill Flap Fertilizer (195-176S).....................................40
T
Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 1.5
(810-298C)...........................................................184
Toolbar Pivots To Box Frames......................................22
Toolbar Pivots To Toolbars (S/N S1194-)......................20
Toolbar To Mainframe...................................................18
Transport Axle And Transport Hook Lift Hydraulics (S/N
S1283+)...............................................................160
Transport Axle And Transport Hook Lift Hydraulics (S/N
S1283-)................................................................158
Transport Axle Midwa y Hydraulic Cylinder 3.5 x 12 x 1.25
(810-316C)...........................................................186
Transport Axle To Mainframe........................................14
Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................182
Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................178
T ransport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)...........................................................180
Transport Hook To Tongue............................................10
Transpor t Tires & Hub..................................................16
V
Vansco Shaft Monitor (Option).....................................74
W
Walkboard, Step And Parking Stand To Box Frame (S/N
S2030-)..................................................................58
Walkboard, Step And Parking Stand To Box Frame (S/N
S2031+).................................................................60
Weight Bracket (S/N S1869-).......................................52
Weight Bracket (S/N S1870+)......................................54
Wing Box To Wing Frame.............................................28
Wing Box To Wing Frame Fertilizer..............................30
01/30/14 - 5 - 195-110P
Page 6
Table of Contents Part Number Index
195-110P - 6 - 01/30/14
Page 7
Table of Contents Part Number Index
01/30/14 - 7 - 195-110P
Page 8
Table of Contents Part Number Index
Hitch To Tongue
(Applies to 3S-3000, 3S-3000F only)
15437
195-110P - 8 - 01/30/14
Page 9
Table of Contents Part Number Index
Hitch To Tongue
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15437
30'-3S TONGUE194-104H1.
RPBY 196-207A890-545C2.
SAFETY CHAIN WASHER194-070D3.
HHCS 1 1/4-7X10 GR5 SPTHD802-543C4.
HHCS 1 1/4-7X9 GR5 SPTHD802-544C5.
SAFETY CHAIN 20000 LB890-183C6.
SINGLE HITCH STRAP-LARGE170-033H7.
NUT HEX 1/2-13 PLT803-020C8.
WASHER LOCK SPRING 1/2 PLT804-015C9.
WASHER FLAT 1/2 USS PLT804-017C10.
CLEVIS HITCH WELDMENT196-136H11.
SPRING HOSE LOOP HEAVY807-073C12.
HHCS 1/2-13X3 GR5802-039C13.
WASHER LOCK 1 1/4 SPRING PLT804-030C14.
NUT HEX 1 1/4-7 PLT803-034C15.
SINGLE HITCH STRAP-SMALL170-034H16.
RPBY 196-146D196-112D17.
WASHER LOCK SPRING 5/16 PLT804-009C18.
HHCS 5/16-18X1 1/4 GR5802-010C19.
1/4 MARKER HYD HOSE GUARD113-370D20.
Tongue And Mainframe
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 9 - 195-110P
Page 10
Table of Contents Part Number Index
Transport Hook To Tongue
(Applies to 3S-3000, 3S-3000F only)
15438
195-110P - 10 - 01/30/14
Page 11
Table of Contents Part Number Index
Transport Hook To Tongue
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15438
CYL 3.5X8X1.25 ROD (TIE) 1 PIN810-104C1.
WASHER FLAT 1/2 SAE PLT804-016C2.
HHCS 1/2-13X2 GR5802-128C3.
ROCKSHAFT HALF BAND CAP NOZERK185-014D4.
TRANSPORT HOOKS WELDMENT194-105H5.
GREASE ZERK STRAIGHT 1/4-28800-001C6.
NUT HEX 1/2-13 PLT803-020C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C9.
WASHER MACH 1 3/4 X 1 X 18 GA804-082C10.
CYLINDER LOCK WELDMENT194-106H11.
PIN COTTER3/16 X 1 1/2 PLT805-104C12.
NUT-HEX 1/4-20 PLT803-006C13.
FSHCS 1/4-20X1 PLT801-068C14.
RPBY 194-174A817-308C15.
Tongue And Mainframe
RevisionCommentsPart DescriptionPart No.Ref.
Refer to "Transport Hook Midway
Hydraulic Cylinder 3.5 x 8 x 1.25
(810-104C)", "Transport Hook
Monarch Hydraulic Cylinder 3.5 x 8
x 1.25 (810-104C)" & "Transport
Hook Cross Hydraulic Cylinder 3.5 x
8 x1.25 (810-104C)" for breakdown.
01/30/14 - 11 - 195-110P
Page 12
Table of Contents Part Number Index
Mainframe To Tongue
(Applies to 3S-3000, 3S-3000F only)
15439
195-110P - 12 - 01/30/14
Page 13
Table of Contents Part Number Index
Mainframe To Tongue
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15439
MAINFRAME WELDMENT194-108H1.
HHCS 1-8X2 3/4 GR. 5802-615C2.
WASHER FLAT 1 USS PLT804-028C3.
WASHER LOCK SPRING 1 PLT804-027C4.
NUT HEX 1-8 PLT803-031C5.
VALVE MOUNT BRACKET194-134H6.
HHCS 3/8-16X1 1/4 GR5802-079C7.
WASHER FLAT 3/8 USS PLT804-011C8.
WASHER LOCK SPRING 3/8 PLT804-013C9.
NUT HEX 3/8-16 PLT803-014C10.
RPBY 196-146D196-112D11.
WASHER LOCK SPRING 5/16 PLT804-009C12.
HHCS 5/16-18X2 1/4 GR5802-138C13.
1/4 MARKER HYD HOSE GUARD113-370D14.
Tongue And Mainframe
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 13 - 195-110P
Page 14
Table of Contents Part Number Index
Transport Axle To Mainframe
(Applies to 3S-3000, 3S-3000F only)
15440
195-110P - 14 - 01/30/14
Page 15
Table of Contents Part Number Index
Transport Axle To Mainframe
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15440
CYL 3.5X12X1.25 ROD (TIE ROD)810-316C1.
NUT-HEX 1/4-20 PLT803-006C2.
TRANSPORT AXLE CYL LOCK194-113H3.
FSHCS 1/4-20X1 PLT801-068C4.
PIN CLEVIS 1 X 3 11/16 GR5 PLT805-124C5.
WASHER MACH 1 3/4 X 1 X 18 GA804-082C6.
PIN COTTER3/16 X 1 1/2 PLT805-104C7.
TRANSPORT AXLE WELDMENT194-110H8.
3-BOLT PIVOT BUSH 4 1/2 ID TB148-402D9.
WASHER LOCK SPRING 3/4 PLT804-023C10.
NUT HEX 3/4-10 PLT803-027C11.
HHCS 3/4-10X2 1/2 GR5802-212C12.
GREASE ZERK STRAIGHT 1/4-28800-001C13.
RPBY 194-174A817-308C14.
PLASTIC CYL LOCK BUMPER194-402D15.
LOCK SPRING CLIP194-401D16.
HHCS 1/4-20X1/2 GR2802-283C17.
Transport Axle
RevisionCommentsPart DescriptionPart No.Ref.
Refer to "Transport Axle Midway
Hydraulic Cylinder 3.5 x 12 x 1.25
(810-316C)" forbreakdown.
01/30/14 - 15 - 195-110P
Page 16
Table of Contents Part Number Index
Transport Tires & Hub
(Applies to 3S-3000, 3S-3000F only)
15441
195-110P - 16 - 01/30/14
Page 17
Table of Contents Part Number Index
Transport Tires & Hub
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15441
BOLT WHEEL 1/2-20X1 90-DEG802-104C1.
VALVE STEM TR415X.625X1 1/4 LG816-035C3.
TIRE 11L-15SL 12 PLY TUBELESS814-031C4.
WHEEL 15 DIA X 10 WIDE X 6 BLT814-023C5.
DECAL CAUTION TIRE 52 PSI818-752C6.
HUB GREASE CAP200-001D7.
BEARING CONE LM-67048822-021C8.
BEARING CUP LM-67010822-020C9.
BRG CUP 2.89ODX.58WD #LM501310822-053C10.
BRG CONE 1.62IDX.78WD#LM501349822-048C12.
SEAL 1.875 ID X 3.00 OD QDS816-265C13.
7/8 SPINDLE WASHER, HARDENED181-064D14.
PIN COTTER3/16 X 1 1/4 PLT805-016C15.
NUT HEX SLOTTED 7/8-14 PLT803-029C16.
SPINDLE SGL 1.98X11.00815-089C17.
HFS 1/2-20X1 1/2 GR5802-399C19.
HHCS 5/8-11X3 3/4 GR5802-153C21.
NUT LOCK 5/8-11 PLT803-024C22.
VALVE STEM METAL TR-575 TUBLES814-210C24.
TIRE SKID ST 265/70B16.5 NHS814-207C25.
RIM 16.5X8.25, 6 BLT4.63 PILT814-209C26.
Transport Axle
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 3 through 5.TRANSPORT WHEEL & TIRE ASSY155-012K2.
Includes items 9 & 10.HUB 6 BOLT 4570# W/CUPS PAINTD815-094C11.
Includes items 7 through 17.HUB & SPINDLE 6 BOLT 4570 LB815-090C18.
Only on outside dual gauge wheels.WHEEL REINFORCING RING152-215D20.
Includes items 24 through 26.RH TIRE/RIM 265/70B16.5 SKID 6196-274K23.
Includes items 24 through 26.LH TIRE/RIM 265/70B16.5 SKID 6196-275K23.
01/30/14 - 17 - 195-110P
Page 18
Table of Contents Part Number Index
Toolbar To Mainframe
(Applies to 3S-3000, 3S-3000F only)
15442
195-110P - 18 - 01/30/14
Page 19
Table of Contents Part Number Index
Toolbar To Mainframe
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15442
HARDENED SPACER WASHER W/SLOTS194-525D1.
NUT NY-LOK 7/8-9 PLT803-028C2.
TOOLBAR VERTICAL PIVOTPIN194-268D3.
TOOLBAR SPACERWASHER194-270D4.
STEEL BUSHING 3 1/4X3IDX3LONG890-193C5.
PIN COTTER5/16 X 2 1/2805-085C9.
NUT HEX SLOTTED 1 1/4 - 7803-079C10.
WASHER FLAT 1 1/4 USS PLT804-035C11.
BOX HINGE PIVOTWASHER197-001D12.
HHCS 7/8-9X5 1/2 GR5802-178C13.
HOSE CLAMP BRACKET196-112D14.
WASHER LOCK SPRING 5/16 PLT804-009C15.
1/4 MARKER HYD HOSE GUARD113-370D17.
NUT HEX JAM 1 1/4-7 PLT803-032C19.
HHCS 1 1/4-7X4 1/2 GR5802-273C20.
WASHER LOCK 1 1/4 SPRING PLT804-030C21.
SPLIT SPACER WASHER,INNER LOCK194-526D23.
SPLIT SPACER WASHER,OUTER LOCK194-527D24.
RHSNB 3/8-16X1 1/4 GR5802-155C25.
RHSNB 3/8-16X1 3/4 GR5802-252C26.
NUT FLANGE LOCK 3/8-16 PLT803-209C27.
WASHER FLAT 3/8 USS PLT804-011C28.
AD PUSH 1/4 TUBE 1/8 FNPT800-449C29.
5 OUTLET GREASE BANK194-577D30.
GREASE ZERK STRAIGHT 1/8-27NPT800-130C31.
Tool Bars
RevisionCommentsPart DescriptionPart No.Ref.
(S/N S1194-)TOOLBAR LH OBSO REPLBY194-151H194-118H6.
(S/N S1194-)TOOLBAR RH OBSO REPLBY194-150H194-117H6.
JUL 2012+W/GBADAPT90 SWIVEL 1/4-28M X 1/4800-436C7.
Refer to page 11-19 for breakdown.CYL 3.5X20X1.5 ROD (TIE ROD)810-298C8.
JUL 2012+W/GBHHCS 5/16-18X5/8802-705C16.
Shown. (S/N S1195+)3S-3000 TOOLBARLH194-151H18.
(S/N S1195+)3S-3000 TOOLBARRH194-150H18.
JUL 2012+W/GBGREASE ADAPT 1/4-28M X 1/4 TB800-211C22.
JUL 2012+W/GBWASHER FLAT 5/16 SAE PLT804-036C32.
JUL 2012+W/GBTUBE NYLON 1/4OD X 062WL990-109R33.
01/30/14 - 19 - 195-110P
Page 20
Table of Contents Part Number Index
Toolbar Pivots To Toolbars (S/N S1194-)
(Applies to 3S-3000, 3S-3000F only)
15443
195-110P - 20 - 01/30/14
Page 21
Table of Contents Part Number Index
Toolbar Pivots To Toolbars (S/N S1194-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15443
NUT HEX JAM 1 1/4-7 PLT803-032C1.
HHCS 1 1/4-7X4 1/2 GR5802-273C2.
NUT HEX 1 1/4-7 NYLON INSERT803-081C3.
WASHER MACH 1.88 X 1.25 X 10GA804-062C4.
WASHER FLAT 1 1/4 SAE PLT804-039C5.
STEEL BUSHING 3 1/4X3IDX3LONG890-193C6.
NUT HEX FLANGE 3/4-10 GR5 PLT803-214C7.
WASHER FLAT 3/4 SAE PLT804-025C8.
GREASE ZERK STRAIGHT 1/4-28800-001C9.
TOOLBAR PIVOT WELDMENT LH194-115H10.
TOOLBAR PIVOT WELDMENT RH194-120H10.
HHCS 1 1/4-7X9 GR5 SPTHD802-544C11.
WASHER LOCK 1 1/4 SPRING PLT804-030C12.
WASHER MACH 1.88 X 1.26 X .048804-141C13.
Tool Bars
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 21 - 195-110P
Page 22
Table of Contents Part Number Index
Toolbar Pivots To Box Frames
(Applies to 3S-3000, 3S-3000F only)
15444
195-110P - 22 - 01/30/14
Page 23
Table of Contents Part Number Index
Toolbar Pivots To Box Frames
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15444
PIN COTTER5/16 X 2 1/2805-085C1.
NUT HEX SLOTTED 1 1/4 - 7803-079C2.
WASHER FLAT 1 1/4 USS PLT804-035C3.
TOOLBAR SPACERWASHER194-270D4.
TOOLBAR HORIZONTAL PIVOT PIN194-269D5.
BOX HINGE PIVOTWASHER197-001D6.
Tool Bars
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 23 - 195-110P
Page 24
Table of Contents Part Number Index
Center Box And Center Frame To Mainframe
(Applies to 3S-3000, 3S-3000F only)
15445
195-110P - 24 - 01/30/14
Page 25
Table of Contents Part Number Index
Center Box And Center Frame To Mainframe
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15445
3S BOX PARTITION195-100D1.
HFS 5/16-18X3/4 GR5802-387C2.
HHCS 3/8-16X1 1/4 GR5802-079C3.
WASHER FLAT 3/8 USS PLT804-011C4.
INTERIOR ENDPANEL COVER LH195-101D5.
HFSS 1/2-13X1 1/2 GR5802-203C6.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C7.
NUT HEX 3/8-16 PLT803-014C8.
WASHER LOCK SPRING 3/8 PLT804-013C9.
NUT HEX 1/2-13 PLT803-020C10.
WASHER LOCK SPRING 1/2 PLT804-015C11.
HHCS 1/2-13X1 1/4 GR5802-034C12.
WASHER FLAT 7/8 USS PLT804-134C13.
WASHER LOCK SPRING 7/8 PLT804-037C14.
NUT HEX 7/8-9 PLT803-049C15.
HHCS 7/8-9X2 3/4 GR5802-103C16.
(S/N S1022+)30'-3S CENTER BOX FRAME194-146H17.
30'-3S SEED BOX195-123H18.
INTERIOR ENDPANEL COVER RH195-102D19.
NUT HEX FLANGE 5/16-18 PLT803-199C20.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Rev. 2 is not interchangeable
w/rev. 1
1st rev.(S/N S1021-)30'-3S CENTER BOX FRAME194-101H17.
01/30/14 - 25 - 195-110P
Page 26
Table of Contents Part Number Index
Center Box And Center Frame To Mainframe Fertilizer
(Applies to 3S-3000, 3S-3000F only)
16414
195-110P - 26 - 01/30/14
Page 27
Table of Contents Part Number Index
Center Box And Center Frame To Mainframe Fertilizer
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16414
3S BOX PARTITION195-100D1.
HFS 5/16-18X3/4 GR5802-387C2.
HHCS 3/8-16X1 1/4 GR5802-079C3.
WASHER FLAT 3/8 USS PLT804-011C4.
INTERIOR ENDPANEL COVER LH195-101D5.
HFSS 1/2-13X1 1/2 GR5802-203C6.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C7.
NUT HEX 3/8-16 PLT803-014C8.
WASHER LOCK SPRING 3/8 PLT804-013C9.
NUT HEX 1/2-13 PLT803-020C10.
WASHER LOCK SPRING 1/2 PLT804-015C11.
HHCS 1/2-13X1 1/4 GR5802-034C12.
WASHER FLAT 7/8 USS PLT804-134C13.
WASHER LOCK SPRING 7/8 PLT804-037C14.
NUT HEX 7/8-9 PLT803-049C15.
HHCS 7/8-9X2 3/4 GR5802-103C16.
30'-3S CENTER BOX FRAME194-146H17.
30'-3S SEED BOX W/ FERTILIZER195-132H18.
INTERIOR ENDPANEL COVER RH195-102D19.
NUT HEX FLANGE 5/16-18 PLT803-199C20.
DIVIDER ANGLE BRACKET195-205D21.
HFSS 5/16-18X1 1/4802-442C22.
DIVIDER CLIP INNER195-206D23.
DIVIDER CLIP OUTER195-207D24.
803-184 FLG TP LK 5/16-18ZNYCR803-177C25.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 27 - 195-110P
Page 28
Table of Contents Part Number Index
Wing Box To Wing Frame
(Applies to 3S-3000, 3S-3000F only)
15446
195-110P - 28 - 01/30/14
Page 29
Table of Contents Part Number Index
Wing Box To Wing Frame
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15446
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C1.
HANDLE119-190D2.
HFSS 1/2-13X1 1/2 GR5802-203C3.
NUT HEX FLANGE 5/16-18 PLT803-199C4.
3S BOX PARTITION195-100D5.
HFS 5/16-18X3/4 GR5802-387C6.
HHCS 3/8-16X1 1/4 GR5802-079C7.
WASHER FLAT 3/8 USS PLT804-011C8.
INTERIOR ENDPANEL COVER LH195-101D9.
NUT HEX 3/8-16 PLT803-014C10.
WASHER LOCK SPRING 3/8 PLT804-013C11.
NUT HEX 1/2-13 PLT803-020C12.
WASHER LOCK SPRING 1/2 PLT804-015C13.
30'-3S SEED BOX195-123H15.
HHCS 1/2-13X1 1/4 GR5802-034C16.
INTERIOR ENDPANEL COVER RH195-102D17.
RPBY 196-146D196-112D18.
WASHER LOCK SPRING 5/16 PLT804-009C19.
HHCS 5/16-18X1 1/4 GR5802-010C20.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
S/N S1022+ (shown)30'-3S WING BOX FRAME RH194-145H14.
S/N S1022+30'-3S WING BOX FRAME LH194-147H14.
Rev. 2 is not interchangeable
w/rev. 1
1st rev.S/N S1021-30'-3S WING BOX FRAME RH194-102H14.
Rev. 2 is not interchangeable
w/rev. 1
1st rev.S/N S1021-30'-3S WING BOX FRAME LH194-100H14.
01/30/14 - 29 - 195-110P
Page 30
Table of Contents Part Number Index
Wing Box To Wing Frame Fertilizer
(Applies to 3S-3000, 3S-3000F only)
16416
195-110P - 30 - 01/30/14
Page 31
Table of Contents Part Number Index
Wing Box To Wing Frame Fertilizer
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16416
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C1.
HANDLE119-190D2.
HFSS 1/2-13X1 1/2 GR5802-203C3.
NUT HEX FLANGE 5/16-18 PLT803-199C4.
3S BOX PARTITION195-100D5.
HFS 5/16-18X3/4 GR5802-387C6.
HHCS 3/8-16X1 1/4 GR5802-079C7.
WASHER FLAT 3/8 USS PLT804-011C8.
INTERIOR ENDPANEL COVER LH195-101D9.
NUT HEX 3/8-16 PLT803-014C10.
WASHER LOCK SPRING 3/8 PLT804-013C11.
NUT HEX 1/2-13 PLT803-020C12.
WASHER LOCK SPRING 1/2 PLT804-015C13.
30'-3S WING BOX FRAME RH194-145H14.
30'-3S WING BOX FRAME LH194-147H14.
30'-3S SEED BOX W/ FERTILIZER195-132H15.
HHCS 1/2-13X1 1/4 GR5802-034C16.
INTERIOR ENDPANEL COVER RH195-102D17.
RPBY 196-146D196-112D18.
WASHER LOCK SPRING 5/16 PLT804-009C19.
HHCS 5/16-18X1 1/4 GR5802-010C20.
DIVIDER ANGLE BRACKET195-205D21.
HFSS 5/16-18X1 1/4802-442C22.
DIVIDER CLIP INNER195-206D23.
DIVIDER CLIP OUTER195-207D24.
803-184 FLG TP LK 5/16-18ZNYCR803-177C25.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 31 - 195-110P
Page 32
Table of Contents Part Number Index
Lid To Box
(Applies to 3S-3000, 3S-3000F only)
22523
195-110P - 32 - 01/30/14
Page 33
Table of Contents Part Number Index
Lid To Box
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg22523
NUT FLANGE LOCK 3/8-16 PLT803-209C2.
LID HINGE PIVOT313-186D3.
LID HINGE BASE PLATE313-176D4.
RHSNB 3/8-16X2 GR5802-411C5.
RHSNB 3/8-16X1 GR5802-015C6.
DECAL GP PLANTING COMPONENTS838-482C7.
NUT LOCK 5/16-18 PLT803-011C8.
BALL STUD 10MM X 5/16-18 X 1/2800-121C9.
LATCH CASTING MACHINED119-153D11.
SPRING .540 O.D.X 1 1/4 X.054W807-106C12.
LID HANDLE119-154D13.
WASHER FLAT 5/16 SAE PLT804-036C14.
HHCS 5/16-18X1 1/4 NYL802-425C15.
LID 104 SEED195-125H16.
HHCS 1/4-20X3/4 GR5802-004C17.
MINI END WHEEL PRESS WHEEL817-042C18.
NUT HEX FLNG T-LOCK 1/4-20 YLW803-293C19.
MANUAL PAK 1'" W/ GASKET817-516C20.
HFSS 1/2-13X1 1/2 GR5802-203C21.
MANUAL PAK MOUNTING PLATE248-251D22.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 2 through 513' EW LID HINGE ASSEMBLY175-180S1.
Includes two of item 912-20 X 90 LB GAS SPRING890-221C10.
01/30/14 - 33 - 195-110P
Page 34
Table of Contents Part Number Index
Lid To Box Fertilizer
(Applies to 3S-3000, 3S-3000F only)
16418
195-110P - 34 - 01/30/14
Page 35
Table of Contents Part Number Index
Lid To Box Fertilizer
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16418
NUT FLANGE LOCK 3/8-16 PLT803-209C2.
LID HINGE PIVOT313-186D3.
LID HINGE BASE PLATE313-176D4.
RHSNB 3/8-16X2 GR5802-411C5.
HHCS 3/8-16X1 GR5802-017C6.
WASHER FLAT 3/8 USS PLT804-011C7.
NUT LOCK 5/16-18 PLT803-011C8.
BALL STUD 10MM X 5/16-18 X 1/2800-121C9.
LATCH CASTING MACHINED119-153D11.
SPRING .540 O.D.X 1 1/4 X.054W807-106C12.
LID HANDLE119-154D13.
WASHER FLAT 5/16 SAE PLT804-036C14.
HHCS 5/16-18X1 1/4 NYL802-425C15.
LID 104 SEED195-125H16.
NUT HEX LOCK 1/4-20 FLG803-088C17.
SEED/FERT FLAP SUBASSY195-177S18.
HFSS 1/4-20X1 GR5802-375C19.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 2-5LID HINGE ASSEMBLYPS25120313-076S1.
Includes two of item 99 1/4-15 X 70LB GAS SPRING890-308C10.
Refer to "Seed / Fertilizer Flap
(195-177S)" forbreakdown.
End stripHINGE CLAMP STRIP ENDS195-198D20.
Center stripHINGE CLAMP STRIP CTR195-197D20.
01/30/14 - 35 - 195-110P
Page 36
Table of Contents Part Number Index
Box Divider Fertilizer
(Applies to 3S-3000, 3S-3000F only)
34110
195-110P - 36 - 01/30/14
Page 37
Table of Contents Part Number Index
Box Divider Fertilizer
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg34110
HHCS 3/8-16X1 GR5802-017C1.
DIVIDER INSERT33 X 4.5 OFFSET817-322C2.
KNOB 1/4-20 FEMALE THD817-324C3.
NUT FLANGE LOCK 3/8-16 PLT803-209C4.
HHCS 1/4-20X1 GR5802-005C5.
NUT LOCK 1/4-20 PLT803-007C6.
RETAINER CLIP195-208D7.
DIVIDER BOTTOM BRACKETLH195-182H8.
DIVIDER BOTTOM BRACKETCTR195-181H9.
DIVIDER BOTTOM BRACKETRH195-183H10.
NUT HEX FLANGE 5/16-18 PLT803-199C11.
DIVIDER CLIP, END MOUNTED195-194D12.
HFS 5/16-18X3/4 GR5802-387C13.
TOP BAR END BRACE195-193D14.
DIVIDER INSERT33 X NO OFFSET817-321C15.
SPILL FLAP SUBASSY195-176S16.
HFSS 1/4-20X1 GR5802-375C17.
NUT HEX LOCK 1/4-20 FLG803-088C18.
3000 FERTILIZERCAP PLATE195-336D19.
HFSS 1/4-20X5/8 GR5802-196C20.
NUT HEX LOCK 1/4-20 FLG803-088C21.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 37 - 195-110P
Page 38
Table of Contents Part Number Index
Seed/Fertilizer Flap (195-177S)
(Applies to 3S-3000, 3S-3000F only)
16462
195-110P - 38 - 01/30/14
Page 39
Table of Contents Part Number Index
Seed/Fertilizer Flap (195-177S)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16462
SEED/FERTILIZER SELECT FLAP195-196D1.
HINGE CLAMP STRIP CTR195-197D2.
HINGE CLAMP STRIP ENDS195-198D3.
NUT-LOCK 1/4-20 PLT803-007C4.
HHCS 1/4-20X5/8 GR5802-078C5.
RUBBER BELTING HINGE816-277C6.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 1-6SEED/FERT FLAP SUBASSY195-177S7.
01/30/14 - 39 - 195-110P
Page 40
Table of Contents Part Number Index
Spill Flap Fertilizer (195-176S)
(Applies to 3S-3000, 3S-3000F only)
16461
195-110P - 40 - 01/30/14
Page 41
Table of Contents Part Number Index
Spill Flap Fertilizer (195-176S)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16461
SPILL FLAP195-195D1.
HINGE CLAMP STRIP CTR195-197D2.
HINGE CLAMP STRIP ENDS195-198D3.
HHCS 1/4-20X5/8 GR5802-078C4.
NUT HEX LOCK 1/4-20 FLG803-088C5.
RUBBER BELTING HINGE816-277C6.
RUBBER BELTING SEAL STRIP816-278C7.
HFSS 1/4-20X1 GR5802-375C8.
RIVET SS 1/8 DIA800-012C9.
DIVIDER CLAMP ANGLE195-191D10.
TOP BAR PARTITION BRACE195-192D11.
WASHER FLAT 1/4 SAE PLT804-007C12.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 1-12SPILL FLAP SUBASSY195-176S13.
01/30/14 - 41 - 195-110P
Page 42
Table of Contents Part Number Index
Fertilizer Tray To Box
(Applies to 3S-3000, 3S-3000F only)
16463
195-110P - 42 - 01/30/14
Page 43
Table of Contents Part Number Index
Fertilizer Tray To Box
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16463
FERT TRAY ASSEMBLY 6195-178S1.
FERT TRAY ASSEMBLY 7 1/2195-179S1.
FERT TRAY ASSEMBLY 10195-180S1.
HFSS 1/4-20X5/8 GR5802-196C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
HFSS 1/4-20X1 GR5802-375C4.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Refer to "Fertilizer Tray" for
breakdown.
Refer to "Fertilizer Tray" for
breakdown.
Refer to "Fertilizer Tray" for
breakdown.
01/30/14 - 43 - 195-110P
Page 44
Table of Contents Part Number Index
Fertilizer Tray
(Applies to 3S-3000, 3S-3000F only)
16464
195-110P - 44 - 01/30/14
Page 45
Table of Contents Part Number Index
Fertilizer Tray
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16464
TRAY BEARING SPACER141-084D1.
13' EW FERT BEARING RETAINER175-102H2.
MF FERT.75 HEX BORE BUSHING191-001D3.
MF FERTHEX BORE PLASTIC BUSH191-002D4.
MF FERTSTARRETAINER SIDE PLT191-018D5.
FERT TRAY WELDMENT 7 1/2195-146H6.
FERT TRAY WELDMENT 6195-147H6.
FERT TRAY WELDMENT 10195-148H6.
FERT TRAY ADAPTER PANEL195-199D7.
SHAFT 3/4 HEX 109 PLT195-204D8.
LATCH STRIKE800-032C9.
RIVET SS 1/8 DIA800-012C10.
SCREW SET 1/4-28 SH X 1/2 LG801-009C11.
HHCS 3/8-16X1 1/4 GR5802-079C12.
RHSNB 5/16-18X3/4 GR5802-092C13.
HFSS 1/4-20X1/2 GR5802-148C14.
RHSNB 3/8-16X1 3/4 GR5802-252C15.
RHSNB 1/4-20X5/8 PLT802-633C16.
NUT-HEX 1/4-20 PLT803-006C17.
NUT HEX 5/16-18 PLT803-008C18.
NUT HEX 3/8-16 PLT803-014C19.
NUT HEX LOCK 1/4-20 FLG803-088C20.
WASHER LOCK SPRING 1/4 PLT804-006C21.
WASHER LOCK SPRING 5/16 PLT804-009C22.
WASHER LOCK SPRING 3/8 PLT804-013C23.
SPKT 40B30 X 3/4 HEXBORE W/ SS808-086C24.
VINYL FERTILIZERDEW SHIELD816-279C25.
6 POINT FERT METERING WHEEL817-053C26.
NYLON RATCHET (TREE RIVET)817-323C27.
BRG FLG 1.25ID 3BOLT822-083C28.
FELT SEAL890-026C29.
WASHER MACH 2 1/2X1 3/4X.075804-048C30.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 45 - 195-110P
Page 46
Table of Contents Part Number Index
Seed Level Indicator
(Applies to 3S-3000, 3S-3000F only)
15448
195-110P - 46 - 01/30/14
Page 47
Table of Contents Part Number Index
Seed Level Indicator
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15448
SEED LEVEL CHAIN BRACKET197-091D1.
RIVET POP 1/8X.265LG FLG800-101C2.
PIN COTTER1/8 X 3/4805-067C3.
CABLE 3/64 X 11 5/8 W/ EYELETS890-305C4.
3S SEED LEVEL ROD195-124H5.
SEED LEVEL ARM MOUNT817-202C6.
WASHER LOCK #10804-054C7.
NUT HEX 10-24 PLT803-001C8.
SEED LEVEL BUSHING817-086C9.
SCREW SET 1/4-28X1/4 KNL CUP801-045C10.
DECAL LETTER E818-295C12.
DECAL SEED LEVEL, NOTCHED818-392C13.
DECAL LETTER F818-296C14.
HFS 10-24 X 1 1/8 PLTD801-096C15.
FOAM FLOAT197-089D16.
FOAM FLOAT WASHER197-096D17.
WASHER FLAT 1/4 USS PLT804-075C18.
.00 HEX SS 1/4-20 NYLOCK803-003C19.
SCR HEX HD SHT MET #8 X 1/2801-154C20.
DECAL SEED LEVEL LH838-237C21.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
2nd rev.Use with item 20.SEED LEVEL INDICATOR817-350C11.
Use existingstock; 1st rev.Use with item 10.INDICATOR OB RPLCD BY 817-350C197-023H11.
No longer available. Order part no.
838-237C.
No longer available. Order part no.
838-237C.
No longer available. Order part no.
838-237C..
01/30/14 - 47 - 195-110P
Page 48
Table of Contents Part Number Index
Lights (S/N S2966-)
(Applies to 3S-3000, 3S-3000F only)
15449
195-110P - 48 - 01/30/14
Page 49
Table of Contents Part Number Index
Lights (S/N S2966-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15449
DUAL AG LIGHTS RH890-312C1.
SCR HEX SELF TAP 1/4-20X1TYPEF801-151C2.
HFSS 1/2-13X1 1/2 GR5802-203C3.
LIGHT HARNESS, 20' WISHBONE890-430C4.
CABLE TIE .19X7.25 1.75D 50LB800-112C5.
HOSE CLIP 13/16 ID800-064C6.
AG LIGHT WIRING HARNESS-28'890-313C7.
PLATE, AGLIGHT LH195-165D8.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C9.
WASHER LOCK SPRING 3/8 PLT804-013C10.
NUT HEX 3/8-16 PLT803-014C11.
CABLE TIE MOUNT800-148C12.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
ShownDUAL AG LIGHTS LH890-311C1.
ShownPLATE, AGLIGHT RH195-112D8.
01/30/14 - 49 - 195-110P
Page 50
Table of Contents Part Number Index
Lights LED (S/N S2067+)
(Applies to 3S-3000, 3S-3000F only)
36171
195-110P - 50 - 01/30/14
Page 51
Table of Contents Part Number Index
Lights LED (S/N S2067+)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg36171
LIGHT HARNESS 20' WISHBONE LED833-685C1.
AG LGHT WIRING HARNESS-28' LED833-679C2.
LIGHT, AMBER LAMP LED833-697C3.
LIGHT, RED LAMP - LED833-696C4.
PLATE, AGLIGHT RH195-112D5.
SCREW HEX SELF TAP 1/4-20X3/4801-081C6.
HHCS 1-8X5 1/2 GR5802-205C7.
NUT HEX FLG LOCK 1/2-13 PLT803-169C8.
LIGHT HRNSS ENHANCE MODULE LED833-694C9.
CABLE TIE MOUNT800-148C10.
CABLE TIE .19X7.25 1.75D 50LB800-112C11.
HOSE CLIP 13/16 ID800-064C12.
WASHER LOCK SPRING 3/8 PLT804-013C13.
NUT HEX 3/8-16 PLT803-014C14.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
ShownPLATE, AGLIGHT LH195-165D5.
01/30/14 - 51 - 195-110P
Page 52
Table of Contents Part Number Index
Weight Bracket (S/N S1869-)
(Applies to 3S-3000, 3S-3000F only)
24414
195-110P - 52 - 01/30/14
Page 53
Table of Contents Part Number Index
Weight Bracket (S/N S1869-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg24414
HHCS 5/8-11X2 GR5802-055C1.
WEIGHT BRACKETWELDMENT-LH171-101H2.
WEIGHT BRACKETWELDMENT-RH171-102H2.
WEIGHT BRACKETADJ LEG171-043D3.
WASHER FLAT 5/8 USS PLT804-019C4.
WASHER LOCK SPRING 5/8 PLT804-022C5.
NUT HEX 5/8-11 PLT803-021C6.
NUT HEX 3/4-10 PLT803-027C7.
WASHER LOCK SPRING 3/4 PLT804-023C8.
U-BOLT 3/4-10 6 1/32 X 7 3/4806-093C9.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 53 - 195-110P
Page 54
Table of Contents Part Number Index
Weight Bracket (S/N S1870+)
(Applies to 3S-3000, 3S-3000F only)
25317
195-110P - 54 - 01/30/14
Page 55
Table of Contents Part Number Index
Weight Bracket (S/N S1870+)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg25317
HHCS 3/8-16X1 1/2 GR5802-022C1.
END CAP - TUBE194-058D2.
WING WEIGHT 3000TT/4000TT589-046D3.
WASHER LOCK SPRING 3/8 PLT804-013C4.
NUT HEX 3/8-16 PLT803-014C5.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 55 - 195-110P
Page 56
Table of Contents Part Number Index
Point Row Control Box With Cables
(Applies to 3S-3000, 3S-3000F only)
22972
195-110P - 56 - 01/30/14
Page 57
Table of Contents Part Number Index
Point Row Control Box With Cables
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg22972
POINT ROW CONTROL BOX823-185C1.
POINT ROW CABLE W/ POWER LEAD823-190C2.
3 SECT POINT ROW WIRE HARNESS823-175C3.
BYPASS CARTRIDGEAND SOLENOID810-408C4.
HYDRAULIC BYPASS VALVE810-432C5.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 57 - 195-110P
Page 58
Table of Contents Part Number Index
Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)
(Applies to 3S-3000, 3S-3000F only)
15450
195-110P - 58 - 01/30/14
Page 59
Table of Contents Part Number Index
Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)
(Applies to 3S-3000, 3S-3000F only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg15450
30'-3S WALKBOARD195-114H1.
NUT HEX 1/2-13 PLT803-020C2.
WASHER LOCK SPRING 1/2 PLT804-015C3.
ShownSTEP LH195-121D4.
STEP RH195-122D4.
HHCS 1/2-13X1 3/4 GR5802-082C5.
PARKING STAND LEG194-135H6.
PIN HAIR COTTER .148 WIRE805-032C7.
PIN BENT SHANK LOCK 5/8 OD805-197C8.
HHCS 1/2-13X1 1/4 GR5802-034C9.
Box and Box Frames
01/30/14 - 59 - 195-110P
Page 60
Table of Contents Part Number Index
Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)
(Applies to 3S-3000, 3S-3000F only)
31230
195-110P - 60 - 01/30/14
Page 61
Table of Contents Part Number Index
Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)
(Applies to 3S-3000, 3S-3000F only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg31230
PARKING STAND LEG194-135H1.
LADDER WELDMENT 3-STEP NARROW195-062H2.
30'-3S WALKBOARD195-114H3.
HHCS 1/2-13X1 1/4 GR5802-034C4.
RHSNB 7/16-14X1 3/4 GR5802-030C5.
NUT HEX 1/2-13 PLT803-020C6.
WASHER LOCK SPRING 1/2 PLT804-015C7.
PIN HAIR COTTER .148 WIRE805-032C8.
PIN BENT SHANK LOCK 5/8 OD805-197C9.
HHCS 3/8-16X1 1/4 GR5802-079C10.
WASHER FLAT 1/2 SAE PLT804-016C11.
NUT FLANGE LOCK 3/8-16 PLT803-209C12.
ShownLADDER MOUNT TOP WELDMENT RH195-064H13.
LADDER MOUNT TOP WELDMENT LH195-063H13.
HHCS 3/8-16X1 GR5802-017C14.
LADDER MOUNT BOTTOM PLATE195-340D15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
NUT HEX FLANGE 3/8-16 PLT803-068C17.
NUT HEX 7/16-14 PLT803-015C18.
WASHER LOCK 7/16 PLT804-014C19.
LH Used with Small Seeds OnlyWALKBOARDEXTENSION LH195-310H20.
RH Used with Small Seeds OnlyWALKBOARDEXTENSION RH195-311H21.
Box and Box Frames
01/30/14 - 61 - 195-110P
Page 62
Table of Contents Part Number Index
Right Hand And Left Hand Subframes To Box Frames
(Applies to 3S-3000, 3S-3000F only)
15451
195-110P - 62 - 01/30/14
Page 63
Table of Contents Part Number Index
Right Hand And Left Hand Subframes To Box Frames
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15451
NUT HEX 1-8 PLT803-031C1.
WASHER LOCK SPRING 1 PLT804-027C2.
6 1/8 EYE BOLT194-129H3.
(S/N S1402+) Shown3S-3000 OPENER SUBFRAME RH194-204H4.
(S/N S1402+)3S-3000 OPENER SUBFRAME LH194-205H4.
(S/N S1401-)SUBFRAME END RIGHT194-126H4.
(S/N S1401-)SUBFRAME END LEFT194-127H4.
(S/N S1398-)HHCS 3/4-10X5 1/2 GR5802-594C5.
(S/N S1398-)NUT LOCK 3/4-10 PLT803-026C6.
(S/N S1398-) Order with 802-441C.TRUNNION CASTING MACHINED194-100D7.
(S/N S1398-)PIN ROLL 5/16 X 1 LG805-156C8.
(S/N S1398-)SUBFRAME PIVOT ARM OUTSIDE194-124H9.
PIN COTTER3/16 X 1 1/2 PLT805-104C10.
(S/N S1398-)PIVOTARM WASHER194-101D11.
(S/N S1022 - S1398)HHCS1 1/8-7X2 1/2 GR5802-441C12.
PIN CLEVIS 1 X 3 7/8 USBLE PLT805-236C13.
CYL 2X8X1.12 ROD (TIE ROD)810-299C14.
3S BEARING ASSEMBLY194-123K15.
HHCS 3/4-10X3 3/4 GR5802-204C16.
GREASE ZERK 1/4-28 X 45-DEG800-058C17.
WASHER FLAT 3/4 SAE PLT804-025C18.
WASHER LOCK SPRING 3/4 PLT804-023C19.
NUT HEX 3/4-10 PLT803-027C20.
GREASE ZERK STRAIGHT 1/4-28800-001C22.
NUT HEX 1/2-13 PLT803-020C23.
WASHER LOCK SPRING 1/2 PLT804-015C24.
3 BOLT PIVOT CAST W/ BOLT H0LE120-247D25.
HHCS 1/2-13X1 3/4 GR5802-082C26.
Referto Hydraulic Cylinder(810-299C
2X8X1.12 ROD) for breakdown
Includes items 17 through 23 (discard
2 of 4 flatwashers upon installation).
(S/N S1398-)SUBFRAME PIVOT ARM INSIDE194-128H21.
(S/N S1046+)HHCS 3/4-10X7 GR5802-095C27.
(S/N S1045+)SUBFRAME ARM RETAINER195-188H28.
(S/N S1399+)SUBFRAME FLEX ARM, INNER194-156H29.
(S/N S1399+)SUBFRAME FLEX ARM, OUTER194-155H30.
(S/N S1399+)SUBFRAME FLEX ARM SPACER,SHORT194-516D31.
(S/N S1399+)HHCS 7/8-9X8 1/2 GR5802-662C32.
(S/N S1399+)NUT NY-LOK 7/8-9 PLT803-028C33.
(S/N S1399+)NUT LOCK 3/4-10 PLT803-026C34.
(S/N S1402+)SUBFRAME FLEX ARM SPACER, LONG194-515D35.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Revision2 is notinterchangeable
with revision1.
1st Revision.(S/N S1021-)HHCS 1 1/8-7X2 GR5 FTHD802-586C12.
01/30/14 - 63 - 195-110P
Page 64
Table of Contents Part Number Index
Center Subframe To Box Frame
(Applies to 3S-3000, 3S-3000F only)
15452
195-110P - 64 - 01/30/14
Page 65
Table of Contents Part Number Index
Center Subframe To Box Frame
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15452
NUT HEX 1-8 PLT803-031C1.
WASHER LOCK SPRING 1 PLT804-027C2.
6 1/8 EYE BOLT194-129H3.
HHCS 1/2-13X1 3/4 GR5802-082C4.
3 BOLT PIVOT CAST W/ BOLT H0LE120-247D5.
PIN COTTER3/16 X 1 1/2 PLT805-104C12.
PIVOTARM WASHER194-101D13.
GREASE ZERK STRAIGHT 1/4-28800-001C15.
PIN CLEVIS 1 X 3 7/8 USBLE PLT805-236C16.
CYL 2X8X1.12 ROD (TIE ROD)810-299C17.
WASHER LOCK SPRING 1/2 PLT804-015C18.
NUT HEX 1/2-13 PLT803-020C19.
(S/N S1399+)3S-3000 OPENER SUBFRAME CENTER194-203H6.
(S/N S1398-); Not shownSUBFRAME CENTER194-125H6.
(S/N S1398-)NUT LOCK 3/4-10 PLT803-026C7.
(S/N S1398-)HHCS 3/4-10X6 GR5802-070C8.
(S/N S1398-); Order with 802-441CTRUNNION CASTING MACHINED194-100D9.
(S/N S1398-)PIN ROLL 5/16 X 1 LG805-156C10.
(S/N S1398-)SUBFRAME PIVOT ARM INSIDE194-128H11.
(S/N S1022 - S1398)HHCS1 1/8-7X2 1/2 GR5802-441C14.
Referto Hydraulic Cylinder(810-299C
2X8X1.12 ROD) for breakdown
(S/N S1046+)SUBFRAME ARM RETAINER195-188H20.
(S/N S1046+)HHCS 3/4-10X7 GR5802-095C21.
(S/N S1046+)WASHER FLAT 3/4 SAE PLT804-025C22.
(S/N S1399+)NUT NY-LOK 7/8-9 PLT803-028C23.
(S/N S1399+)HHCS 7/8-9X7 GR5802-139C24.
(S/N S1399+)SUBFRAME FLEX ARM SPACER,SHORT194-516D25.
(S/N S1399+)SUBFRAME FLEX ARM, INNER194-156H26.
Box and Box Frames
RevisionCommentsPart DescriptionPart No.Ref.
Rev. 2 is not interchangeable
w/rev. 1
1st rev.(S/N S1021-)HHCS 1 1/8-7X2 GR5 FTHD802-586C14.
01/30/14 - 65 - 195-110P
Page 66
Table of Contents Part Number Index
Seed Rate Adjustment Handle
(Applies to 3S-3000, 3S-3000F only)
15453
195-110P - 66 - 01/30/14
Page 67
Table of Contents Part Number Index
Seed Rate Adjustment Handle
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15453
NUT HEX 5/16-18 PLT803-008C1.
WASHER LOCK SPRING 5/16 PLT804-009C2.
WASHER FLAT 5/16 SAE PLT804-036C3.
HHCS 3/8-16X3/4 GR5802-014C4.
WASHER LOCK SPRING 3/8 PLT804-013C5.
WASHER FLAT 3/8 SAE PLT804-012C6.
HHCS 5/16-18X3/4 GR5802-007C7.
SNAP RING EXT 17 MM800-003C8.
BRG BALL 17IDX40OD 6203822-008C9.
WASHER ADJ HANDLE BRG804-001C10.
SEED RATE ADJ HANDLE WLDMNT118-443H11.
WASHER FLAT 5/8 SAE PLT804-021C12.
WASHER MACH 1.19 X .63 X 18GA804-040C13.
ADJUSTMENT HANDLE PIVOT109-069D14.
PIN COTTER3/16 X 1 1/4 PLT805-016C15.
NUT WING 1/2-13 PLT803-016C16.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H17.
SCREW RD HD 8-32 X 3/8 BRASS801-001C18.
WASHER FLAT #8 BRASS804-003C19.
NAME PLATE ADJ. GUIDE LONG819-001C20.
SEED RATE ADJ WLDMNT118-444H21.
WASHER INTERNAL STAR #8 BRASS804-002C22.
NUT HEX 8-32 BRASS803-035C23.
NUT HEX LOCK 1/4-20 FLG803-088C24.
HFSS 1/4-20X5/8 GR5802-196C25.
1 3/4 WIDE FEEDER CUP PLUG817-087C26.
Feeder Cup Channels
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 67 - 195-110P
Page 68
Table of Contents Part Number Index
6" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
15454
195-110P - 68 - 01/30/14
Page 69
Table of Contents Part Number Index
6" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15454
3 BOX DIVIDER FOR 4 7/8 ROW118-431D1.
BOX DVDR 4.00 X 60DEG118-433D2.
BOX DVDR 5.13 X 60DEG118-437D3.
6 5/8 BOX DVDER FOR 8 1/2 ROW118-432D4.
HHCS 1/4-20X3/4 GR5802-004C5.
2SNT SEED BOX DIVIDER CLIP118-341D6.
30'-6 20RWFEEDERCUP TRAY195-105D7.
NUT HEX WHIZ 1/4-20 PLT803-194C8.
WASHER RETAINING804-031C9.
2.454 FEEDER CUP SPACER152-044D10.
SPACER TUBE X 1.454118-434D11.
5/8 SHAFT LOCKING COLLAR890-350C12.
SCREW SET 5/16-18 SKT KP X 3/8801-035C13.
FEEDER CUP BEARING HOUSING118-336D16.
BRG 30IDX55OD MM822-103C17.
SNAP RING EXT BASIC 1 3/16800-004C18.
SNAP RING INTERNAL 2.165800-107C19.
MACHINED ADJUSTMENT SPOOL109-091D20.
5/8SQ. 107 7/32 FEEDRCUP SHFT195-106D21.
PM SEED CUP SPROCKET890-190C22.
RPBY 890-190C817-072C22.
SEED CUP SLEEVE817-074C23.
SEED CUP ADJUSTMENT HANDLE817-071C24.
SEED CUP RIGHT HALF817-069C25.
SEED CUP DOOR817-070C26.
SEED CUP LEFT HALF817-068C27.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C28.
NYLON WASHER-SPLIT817-004C29.
SEED CUP WASHER RETAINER817-073C30.
HHCS 3/8-16X3/4 GR5802-014C32.
WASHER LOCK SPRING 3/8 PLT804-013C33.
SPACER TUBE X 1.207118-443D34.
Feeder Cup Channels
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 15 through 19.FEEDER CUP BEARING ASSEMBLY118-226S14.
2nd Revision.BEARING HUB 40A15118-508D15.
Use existingstock; 1st Revision.RPBY 118-508D118-227E15.
Includes items 24 through 30.SEED CUP ASSEMBLY817-075C31.
01/30/14 - 69 - 195-110P
Page 70
Table of Contents Part Number Index
7 1/2" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
15455
195-110P - 70 - 01/30/14
Page 71
Table of Contents Part Number Index
7 1/2" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15455
BOX DVDR 4.00 X 60DEG118-433D1.
5 5/8 BOX DVDR FOR 7 1/2 ROW118-340D2.
BOX DVDR 5.13 X 60DEG118-437D3.
4 5/8 BOX DVDR FOR 8 ROW118-370D4.
4 13/16 BOX DVDR FOR 7 1/2 ROW118-339D5.
BOX DIVIDER FOR 10 ROW118-356D6.
HHCS 1/4-20X3/4 GR5802-004C7.
2SNT SEED BOX DIVIDER CLIP118-341D8.
30'-7 1/2 16RW FEEDERCUP TRAY195-103D9.
5/8 SHAFT LOCKING COLLAR890-350C10.
SCREW SET 5/16-18 SKT KP X 3/8801-035C11.
NUT HEX WHIZ 1/4-20 PLT803-194C12.
WASHER RETAINING804-031C13.
SPACER TUBE X 3.078118-376D14.
SNAP RING EXT BASIC 1 3/16800-004C16.
SNAP RING INTERNAL 2.165800-107C17.
BRG 30IDX55OD MM822-103C18.
FEEDER CUP BEARING HOUSING118-336D19.
SPACER TUBE X 3.266118-347D21.
SPACER TUBE X 3.579118-438D22.
2.454 FEEDER CUP SPACER152-044D23.
MACHINED ADJUSTMENT SPOOL109-091D24.
SPACER TUBE X 1.707118-439D25.
5/8SQ. 107 7/32 FEEDRCUP SHFT195-106D26.
SEED CUP ADJUSTMENT HANDLE817-071C27.
SEED CUP RIGHT HALF817-069C28.
SEED CUP DOOR817-070C29.
SEED CUP LEFT HALF817-068C30.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C31.
NYLON WASHER-SPLIT817-004C32.
SEED CUP WASHER RETAINER817-073C33.
RPBY 890-190C817-072C35.
SEED CUP SLEEVE817-074C36.
WASHER LOCK SPRING 3/8 PLT804-013C37.
HHCS 3/8-16X3/4 GR5802-014C38.
Feeder Cup Channels
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 16 through 20FEEDER CUP BEARING ASSEMBLY118-226S15.
2nd rev.BEARING HUB 40A15118-508D20.
Use existingstock; 1st rev.RPBY 118-508D118-227E20.
Includes items 27 through 33SEED CUP ASSEMBLY817-075C34.
01/30/14 - 71 - 195-110P
Page 72
Table of Contents Part Number Index
10" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
15456
195-110P - 72 - 01/30/14
Page 73
Table of Contents Part Number Index
10" Feeder Cup Spacing
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15456
6 5/8 BOX DVDER FOR 8 1/2 ROW118-432D1.
BOX DIVIDER FOR 10 ROW118-356D2.
HHCS 1/4-20X3/4 GR5802-004C3.
2SNT SEED BOX DIVIDER CLIP118-341D4.
30'-10 12RWFEEDERCUP TRAY195-104D5.
5/8 SHAFT LOCKING COLLAR890-350C6.
SCREW SET 5/16-18 SKT KP X 3/8801-035C7.
NUT HEX WHIZ 1/4-20 PLT803-194C8.
WASHER RETAINING804-031C9.
SPACER TUBE X 5.079118-440D10.
SNAP RING EXT BASIC 1 3/16800-004C12.
SNAP RING INTERNAL 2.165800-107C13.
BRG 30IDX55OD MM822-103C14.
FEEDER CUP BEARING HOUSING118-336D15.
185C058TUBE X 6.578118-353D17.
MACHINED ADJUSTMENT SPOOL109-091D18.
SPACER TUBE X 4.207118-442D19.
5/8SQ. 107 7/32 FEEDRCUP SHFT195-106D20.
SEED CUP ADJUSTMENT HANDLE817-071C21.
SEED CUP RIGHT HALF817-069C22.
SEED CUP DOOR817-070C23.
SEED CUP LEFT HALF817-068C24.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C25.
NYLON WASHER-SPLIT817-004C26.
SEED CUP WASHER RETAINER817-073C27.
SEED CUP SLEEVE817-074C29.
PM SEED CUP SPROCKET890-190C30.
RPBY 890-190C817-072C30.
WASHER LOCK SPRING 3/8 PLT804-013C31.
NUT HEX 3/8-16 PLT803-014C32.
Feeder Cup Channels
RevisionCommentsPart DescriptionPart No.Ref.
Includes items 12 through 16.FEEDER CUP BEARING ASSEMBLY118-226S11.
2nd Revision.BEARING HUB 40A15118-508D16.
Use existingstock; 1st Revision.RPBY 118-508D118-227E16.
Includes items 21 through 27.SEED CUP ASSEMBLY817-075C28.
01/30/14 - 73 - 195-110P
Page 74
Table of Contents Part Number Index
Vansco Shaft Monitor (Option)
(Applies to 3S-3000, 3S-3000F only)
27009
195-110P - 74 - 01/30/14
Page 75
Table of Contents Part Number Index
Vansco Shaft Monitor (Option)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg27009
VANSCO2 CHANNEL SHAFT MONITOR823-059C1.
VANSCO3 CHANNEL SHAFT MONITOR823-060C1.
VANSCO2 CHNL SHAFT MNTR-2SNT823-076C1.
VANSCOCONTROL BOX ASSY 2 CH2530012.
VANSCOCONTROL BOX ASSY 3 CH2530002.
VANSCOHARNESS 2 CH 40FT2537013.
VANSCOHARNESS 3 CH 60FT2537003.
REED SWITCH PICK-UPVA-0800024.
WASHER FLAT #8 SAE PLT804-088C5.
WASHER LOCK #8804-043C6.
NUT HEX 8-32803-064C7.
VANSCOSWITCH BRACKET116-181D8.
SCREW RD HD 8-32 X 1 1/2LG PLT801-067C9.
SCREW RD HD 8-32 X 1/2 LG PLT801-016C10.
VANSCOMAGNET & CABLE TIE ASSY116-132K11.
VANSCOMAGNET890-321C12.
CABLE TIE .19X7.25 1.75D 50LB800-112C13.
MOUNTING BRACKETVA-VMM25350114.
VANSCOMOUNTING KNOB KITVA-25330715.
BRYLITE CONSOLE ENDVA-JX-B7716.
BRYLITE HARNESS ENDVA-JX-B7617.
Feeder Cup Channels
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 75 - 195-110P
Page 76
Table of Contents Part Number Index
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)
(Applies to 3S-3000, 3S-3000F only)
34220
195-110P - 76 - 01/30/14
Page 77
Table of Contents Part Number Index
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)
(Applies to 3S-3000, 3S-3000F only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg34220
HFSS 1/4-20X3/4 GR5802-257C1.
HOSE CLIP 5/8 I.D.800-052C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
CABLE TIE, NYLON7700264.
MAGNET, ADHESIVE BACKED, LARGE5400175.
NUT HEX JAM, PLASTIC M16 X 27104256.
SHAFT SENSOR MOUNT116-019D7.
SCR SELF TAP #10 X 3/4801-199C8.
LOUP SHAFT SENSOR 2&3 CHANNEL2531009.
SMALL CUP SENSOR MOUNT116-020D10.
LOUP 3 CHANNEL SHAFT MONITOR25301711.
LOUP 2 CHANNEL SHAFT MONITOR25301612.
SHAFT MONITOREXT. 30' 6P WP833-595C13.
HARNESS 3 SHAFT MONITOR LOUP31895114.
LOUP 3 CHANNEL SHAFT MONITOR25301715.
SHAFT MONITOREXT. 25' 4P WP833-596C16.
HARNESS 2 SHAFT MONITOR LOUP31891717.
Feeder Cup Channels
01/30/14 - 77 - 195-110P
Page 78
Table of Contents Part Number Index
Single Gauge Wheel
(Applies to 3S-3000, 3S-3000F only)
15457
195-110P - 78 - 01/30/14
Page 79
Table of Contents Part Number Index
Single Gauge Wheel
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15457
HHCS 1/2-13X3 GR5802-039C1.
NUT HEX JAM 1/2-13 PLT803-036C3.
WASHER FLAT 1/2 USS HARD PLT804-113C4.
WASHER LOCK SPRING 1/2 PLT804-015C5.
3S TORSIONSPRING HANDLE LH194-273D7.
SUBFRAME LOCK HOOK195-159D8.
HHCS 5/16-18X2 1/4 GR5802-138C9.
GAUGE WHEEL LOCK PIN195-160D10.
NUT LOCK 5/16-18 PLT803-011C11.
NUT BRG LOCK, TN-10803-208C12.
WASHER BRG LOCK, TW110804-098C13.
AXLE SPACER TUBE120-198D15.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C16.
BRG CONE 2.00ID TIM33889822-117C17.
BRG CUP 3.75OD TIM33821822-118C18.
SEAL 3.375 X 2.0 X.438 CR20125816-012C21.
BOLT WHEEL 1/2-20X1 90-DEG802-104C26.
RPBY 814-011C814-026C27.
VALVE STEM TR415X.625X1 1/4 LG816-035C28.
WHEEL 8 X 15 X 6 BOLT814-008C29.
RUBBER HANDLE GRIP.207IDX3 1/2816-241C31.
CHAIN RL #50 X 162 PITCHES136-175D36.
VALVE STEM METAL TR-575 TUBLES814-210C42.
TIRE SKID ST 265/70B16.5 NHS814-207C43.
RIM 16.5X8.25, 6 BLT4.63 PILT814-209C44.
Gauge Wheels
RevisionCommentsPart DescriptionPart No.Ref.
S/N S1399+NO. 50 12T IDLER SPKT817-423C2.
S/N S1398-NO. 40 12T IDLER SPKT.817-025C2.
S/N S1399+CHAIN RL #50 X 161 PITCHES136-173D6.
S/N S1398-RPBY 136-128D809-172C6.
Shown.3S TORSION SPRING HANDLE RH194-274D7.
S/N S1182+SPNDLE 2'"W/5/8 CROSS HOLE SNGL195-230D14.
S/N S1181-SPNDLE 2 X 19 W/ 1.95-18 THD195-143D14.
S/N S1399+SPKT 50B19C2B W/5/16 HOLE808-287C19.
S/N S1398-SPKT 40B19X2B W/5/16 HOLE808-097C19.
S/N S1399+PIN ROLL 5/16 X 3 PLT805-030C20.
S/N S1181-HUB;HVY 6 BLT 2 BR 4.62 PILOT195-107D22.
S/N S1181-WASHER FLAT 1/2 SAE PLT804-016C23.
S/N S1181-NUT HEX FLG. LOCK 1/2-13 PLT.803-169C24.
S/N S1182-HHCS 1/2-13 X 4 3/16 GR8 SP194-297D25.
S/N S1181-HFS 1/2-13X4 GR8 SPTHD802-548C25.
Includes items 27, 28, & 29.6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K30.
S/N S1182+6-BOLT HEAVY DRIVE HUB 2 BORE152-390D32.
S/N S1182+NUT HEX FLANGE LOCK 5/8-11 PLT803-263C33.
S/N S1182+WASHER FLAT 5/8 HARD ASTMF436804-095C34.
S/N S1182+HHCS 5/8-11X4 SPTHD GR8802-687C35.
S/N S1505+SPNDL 2 X 19.20 W/ 1.5-12 THD195-266D37.
S/N S1505+WASHER HARD 1 1/2 MILCARB GR8804-182C38.
S/N S1505+NUT HEX SLOTTED 1 1/2-12 PLT803-239C39.
S/N S1505+PIN COTTER3/8 X 3 PLT805-148C40.
Includes items 42 through 44.RH TIRE/RIM 265/70B16.5 SKID 6196-274K41.
Includes items 42 through 44.LH TIRE/RIM 265/70B16.5 SKID 6196-275K41.
01/30/14 - 79 - 195-110P
Page 80
Table of Contents Part Number Index
Dual Gauge Wheel
(Applies to 3S-3000, 3S-3000F only)
15458
195-110P - 80 - 01/30/14
Page 81
Table of Contents Part Number Index
Dual Gauge Wheel
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15458
HHCS 1/2-13X3 GR5802-039C1.
NUT HEX JAM 1/2-13 PLT803-036C3.
WASHER FLAT 1/2 USS HARD PLT804-113C4.
WASHER LOCK SPRING 1/2 PLT804-015C5.
3S TORSIONSPRING HANDLE LH194-273D7.
SUBFRAME LOCK HOOK195-159D8.
HHCS 5/16-18X2 1/4 GR5802-138C9.
GAUGE WHEEL LOCK PIN195-160D10.
NUT LOCK 5/16-18 PLT803-011C11.
NUT BEARING LOCK, TN-10803-208C12.
WASHER BEARING LOCK, TW110804-098C13.
SPNDLE 2"W/5/8 CROSS HOLE DUAL195-229D14.
SPNDLE 2X24 1/2 W/1.95-18 THD195-142D14.
AXLE SPACER TUBE120-198D15.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C16.
BEARING CONE 2 TIM33889822-117C17.
BEARING CUP 2 TIM33821822-118C18.
SEAL 3.375 X 2.0 X.438 CR20125816-012C21.
BOLT WHEEL 1/2-20X1 90-DEG802-104C25.
VALVE STEM TR415X.625X1 1/4 LG816-035C27.
WHEEL 8 X 15 X 6 BOLT814-008C28.
RUBBER HANDLE GRIP.207IDX3 1/2816-241C31.
CHAIN RL #50 162 PITCHES136-175D36.
WASHER FLAT 2 ID X 2 5/8 X 10G195-234D41.
S/N S1399+NO. 50 12T IDLER SPKT817-423C2.
S/N S1398-NO. 40 12T IDLER SPKT.817-025C2.
S/N S1399+CHAIN RL #50 161 PITCHES136-173D6.
S/N S1398-CHAIN RL #40 X 190 PITCH W/CON809-172C6.
(SHOWN)3STORSION SPRING HANDLE RH194-274D7.
(S/N S1182 - S/N S1503) Use with
items 32-35.
30.
S/N S1399+SPKT 50B19C2B W/5/16 HOLE808-287C19.
S/N S1398-SPKT 40B19X2B W/5/16 HOLE808-097C19.
S/N S1399+PIN ROLL 5/16 X 3 PLT805-030C20.
S/N S1181-HUB;HVY 6 BLT 2 BR 4.62 PILOT195-107D22.
S/N S1181-WASHER FLAT 1/2 SAE PLT804-016C23.
S/N S1181-NUT HEX FLG. LOCK 1/2-13 PLT803-169C24.
Formerly 814-026CTIRE 9.5 L X 15 8 PLY814-011C26.
Includes items: 26, 27, & 28.6 BOLT WHL&TIRE 6 PLY TUBELES161-046K29.
S/N S1182+HHCS 1/2-13 X 4 3/16 GR8 SP194-297D30.
S/N S1181-HFS 1/2-13X4 GR8 SPTHD802-548C30.
S/N S1182+6-BOLT HEAVY DRIVE HUB 2 BORE152-390D32.
S/N S1182+NUT HEX FLANGE LOCK 5/8-11 PLT803-263C33.
S/N S1182+WASHER FLAT 5/8 HARD ASTMF436804-095C34.
S/N S1182+HHCS 5/8-11X4 SPTHD GR8802-687C35.
S/N S1505 - S/N S2189SPNDL 2 X 24.70 W/ 1.5-12 THD195-265D37.
S/N S2190+SPNDL 2 X 24.7 1.5-12THD NOHLE195-351D37.
S/N S1505+WASHER HARD 1 1/2 MILCARB GR8804-182C38.
S/N S1505+NUT HEX SLOTTED 1 1/2-12803-239C39.
S/N S1505+PIN COTTER3/8 X 3 PLT805-148C40.
S/N S2190+SPKT 50B19 2.88 KEYLESS BORE808-413C42.
S/N S2190+HUB KEYLESS 2.0 BORE X 2.88 OD891-137C43.
S/N S2190+WRENCH OPEN END 2 1/2195-352D44.
S/N S2190+WRENCH SPANNER 6 BOLT HUB195-355D45.
(OPTION) Includes items: 47-48RH TIRE/RIM 265/70B16.5 SKID 6196-274K46.
(OPTION) Includes items: 47-48LH TIRE/RIM 265/70B16.5 SKID 6196-275K46.
Gauge Wheels
RevisionCommentsPart DescriptionPart No.Ref.
3rd Revision.(S/N S1504+) Use with items 32-35.SPNDL 2 X 24.70 W/ 1.5-12 THD195-265D14.
Revision2 is notinterchangeable
with revision1.
1st Revision.(S/N S1181-) Use with items 22-24 &
01/30/14 - 81 - 195-110P
Page 82
Table of Contents Part Number Index
Dual Gauge Wheel (continued)
(Applies to 3S-3000, 3S-3000F only)
PIN ROLL 3/8 X 2 PLT805-249C50.
DRIVE SPROCKET TORQUING NUT195-398H51.
RevisionCommentsPart DescriptionPart No.Ref.
(OPTION)TIRESKID ST 265/70B16.5 NHS814-207C47.
(OPTION)RIM16.5X8.25, 6 BLT 4.63 PILT814-209C48.
(OPTION)VALVE STEM METAL TR-575 TUBLES814-210C49.
195-110P - 82 - 01/30/14
Page 83
Table of Contents Part Number Index
Dual Gauge Wheel (continued)
(Applies to 3S-3000, 3S-3000F only)
This Page Intentionally Left Blank
Gauge Wheels
01/30/14 - 83 - 195-110P
Page 84
Table of Contents Part Number Index
Right Hand Drive (S/N S1021-)
(Applies to 3S-3000, 3S-3000F only)
15459
195-110P - 84 - 01/30/14
Page 85
Table of Contents Part Number Index
Right Hand Drive (S/N S1021-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg15459
PIN LINCH 3/16 X 1 9/16 LONG805-240C1.
RPBY 808-259C195-137H2.
SPKT 40B23T WITH 7/8 HEX HUB195-134H3.
SPKT 40B34T WITH 7/8 HEX HUB195-135H4.
RPBY 808-258C195-136H5.
FLANGETTE 52 MST822-032C6.
BRG 7/8HEXX2.05OD SPH822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
CHAIN RL #40 X 68 PITCH W/CON809-149C11.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
POWER SHAFT 7/8 HEX RH195-149D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/4 GR5802-099C20.
RPBY 136-122D809-164C21.
HSHCS 1/4-20X3/4801-070C22.
WASHER LOCK SPRING 1/4 PLT804-006C23.
RPBY 808-240C152-283D24.
GREASE ZERK 1/4-28 X 45-DEG800-058C25.
SPKT 40B12 7/8 HEX BORE W/SS808-143C28.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
Revised part. order w/#28, 808-143C
1st time only(see detail inillustration)
Order only if using original shaftRPBY 808-260C195-138H12.
Refer to "Jaw Clutch" for breakdown.JAWCLUTCH CW 7/8 HEX SHORT176-044S26.
S/N S1399+SPKT 50A57 WITH 7/8 HEX HUB195-264H27.
S/N S1398-SPKT 40B57T WITH 7/8 HEX HUB195-139H27.
Order only ifusing revised shaft (orient
as shown in detail)
01/30/14 - 85 - 195-110P
Page 86
Table of Contents Part Number Index
Right Hand Drive (S/N S1022 - S/N S1562)
(Applies to 3S-3000, 3S-3000F only)
16066
195-110P - 86 - 01/30/14
Page 87
Table of Contents Part Number Index
Right Hand Drive (S/N S1022 - S/N S1562)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16066
PIN LINCH 3/16 X 1 9/16 LONG805-240C1.
RPBY 808-259C195-137H2.
SPKT 40B23T WITH 7/8 HEX HUB195-134H3.
SPKT 40B34T WITH 7/8 HEX HUB195-135H4.
RPBY 808-258C195-136H5.
FLANGETTE 52 MST822-032C6.
BRG 7/8HEXX2.05OD SPH822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
CHAIN RL #40 X 68 PITCH W/CON809-149C11.
SPKT 40B12 7/8 HEX BORE W/SS808-143C12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
POWER SHAFT 7/8 HEX RH OUTPUT195-187D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/4 GR5802-099C20.
HHCS 1/4-20X2 1/4 GR5802-551C22.
WASHER LOCK SPRING 1/4 PLT804-006C23.
GREASE ZERK 1/4-28 X 45-DEG800-058C25.
Refer to "Jaw Clutch" for breakdown.JAWCLUTCH CW EXT 7/8 HEX176-042S26.
SPKT 50A57 WITH 7/8 HEX HUB195-264H27.
SPKT 40B57T WITH 7/8 HEX HUB195-139H27.
POWER SHAFT 7/8 HEX RH INPUT195-186D28.
CLUTCH ADAPTOR 7/8 HEX BORE195-170D29.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
2nd rev.CHAIN RL #40 129 PITCHES136-122D21.
Use existingstock; 1st rev.RPBY 136-122D809-164C21.
2nd rev.SPKT 40A23X1.813-1.818 BR/6HOL808-240C24.
Use existingstock; 1st rev.RPBY 808-240C152-283D24.
01/30/14 - 87 - 195-110P
Page 88
Table of Contents Part Number Index
Right Hand Drive (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
21631
195-110P - 88 - 01/30/14
Page 89
Table of Contents Part Number Index
Right Hand Drive (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg21631
PIN LYNCH 3/16 X 1 9/16 LONG805-240C1.
SPKT 40B14 X 7/8 HEX BORE808-259C2.
SPKT 40C23 X 7/8 HEX BORE808-256C3.
SPKT 40B34 X 7/8 HEX BORE808-257C4.
SPKT 40B72 X 7/8 HEX BORE808-258C5.
FLANGETTE 52 MST822-032C6.
BRG.7/8HEX BR 52MM SPHRICAL OD822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
SPKT 40B12 7/8 HEX BORE W/SS808-143C12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
POWER SHAFT 7/8 HEX RH OUTPUT195-187D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/2 GR5802-041C20.
CHAIN RL #40 129 PITCHES136-122D21.
HHCS 1/4-20X2 1/4 GR5802-551C22.
WASHER LOCK SPRING 1/4 PLT804-006C23.
SPKT 40A23X1.813-1.818 BR/6HOL808-240C24.
GREASE ZERK 1/4-28 X 45-DEG800-058C25.
CLUTCH ADAPTOR 7/8 HEX BORE195-170D29.
HHCS 1/2-13X4 1/2 GR5802-413C30.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C31.
CLUTCH, SIDE PLATE TAPPED402-050D35.
SPKT 50A57 SPECIAL BORE808-449C36.
POLYURETHANE ROD SPRING 5/16 L402-376D37.
HUB RATCHET SPKT #50890-954C38.
KEY RATCHET CLUTCH #50 SPKT403-751D39.
CLUTCH, SIDE PLATE C/BORED402-051D40.
HSHCS 1/4-20X7/8802-418C41.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
(S/N S1402+)CHAIN RL #40 69 PITCHES136-052D11.
(S/N S1401-)CHAIN RL #40 X 68 P809-149C11.
Refer to Jaw Clutch for breakdownJAWCLUTCH CW EXT 7/8 HEX176-042S26.
(S/N S2717-)SPKT 50A57 WITH 7/8 HEX HUB195-264H27.
(S/N S2718+) Includes items: 35-41SPKT 50C57 RATCHET DRIVE195-320S27.
(S/N S2717-)POWER SHAFT 7/8 HEX RH INPUT195-186D28.
(S/N S2718+)POWER SHAFT 7/8 HEX LH195-381D28.
(S/N S2718+)RHSNB 5/16-18X3/4 GR5802-092C32.
(S/N S2718+)WASHER MACH 1.50 X 1.00 X 18GA804-061C33.
(S/N S2718+)7/8 HEX WASHER X .21195-376D34.
01/30/14 - 89 - 195-110P
Page 90
Table of Contents Part Number Index
Right Hand Fertilizer (S/N S1562-)
(Applies to 3S-3000, 3S-3000F only)
16421
195-110P - 90 - 01/30/14
Page 91
Table of Contents Part Number Index
Right Hand Fertilizer (S/N S1562-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16421
PIN LINCH 3/16 X 1 9/16 LONG805-240C1.
RPBY 808-259C195-137H2.
SPKT 40B23T WITH 7/8 HEX HUB195-134H3.
SPKT 40B34T WITH 7/8 HEX HUB195-135H4.
RPBY 808-258C195-136H5.
FLANGETTE 52 MST822-032C6.
BRG 7/8HEXX2.05OD SPH822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
CHAIN RL #40 X 68 PITCH W/CON809-149C11.
SPKT 40B12 7/8 HEX BORE W/SS808-143C12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
POWER SHAFT 7/8 HEX RH OUTPUT195-187D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/4 GR5802-099C20.
RPBY 136-122D809-164C21.
SPKT 40B57T WITH 7/8 HEX HUB195-139H22.
POWER SHAFT 7/8 HEX RH INPUT195-186D23.
3S-3000F RH WING CLUTCH ASSY195-186K24.
HEX SHAFT 7/8, AUXILIARY POWER195-211D25.
RPBY 136-064D809-071C26.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
S/N S1399+SPKT 50A57 WITH 7/8 HEX HUB195-264H22.
Refer to "Right Hand Wing Clutch
Fertilizer (195-186K)" forbreakdown.
01/30/14 - 91 - 195-110P
Page 92
Table of Contents Part Number Index
Right Hand Fertilizer (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
21632
195-110P - 92 - 01/30/14
Page 93
Table of Contents Part Number Index
Right Hand Fertilizer (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg21632
PIN LINCH 3/16 X 1 9/16 LONG805-240C1.
SPKT 40B14 X 7/8 HEX BORE808-259C2.
SPKT 40C23 X 7/8 HEX BORE808-256C3.
SPKT 40B34 X 7/8 HEX BORE808-257C4.
SPKT 40B72 X 7/8 HEX BORE808-258C5.
FLANGETTE 52 MST822-032C6.
BRG.7/8HEX BR 52MM SPHRICAL OD822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED/FERTILIZER SELECT FLAP195-196D10.
SPKT 40B12 7/8 HEX BORE W/SS808-143C12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
POWER SHAFT 7/8 HEX RH OUTPUT195-187D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/2 GR5802-041C20.
CHAIN RL #40 129 PITCHES136-122D21.
3S-3000F RH WING CLUTCH ASSY195-186K24.
HEX SHAFT 7/8, AUXILIARY POWER195-211D25.
CHAIN RL #40 51 PITCHES136-064D26.
HHCS 1/2-13X4 1/2 GR5802-413C27.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C28.
CLUTCH, SIDE PLATE TAPPED402-050D32.
SPKT 50A57 SPECIAL BORE808-449C33.
POLYURETHANE ROD SPRING 5/16 L402-376D34.
HUB RATCHET SPKT #50890-954C35.
KEY RATCHET CLUTCH #50 SPKT403-751D36.
CLUTCH, SIDE PLATE C/BORED402-051D37.
HSHCS 1/4-20X7/8802-418C38.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
(S/N S1402+)CHAIN RL #40 69 PITCHES136-052D11.
(S/N S1401-)CHAIN RL #40 X 68 P809-149C11.
(S/N S2717-)SPKT 50A57 WITH 7/8 HEX HUB195-264H22.
(S/N S2718+) Includes items 32-38SPKT 50C57 RATCHET DRIVE195-320S22.
(S/N S2717-)POWER SHAFT 7/8 HEX RH INPUT195-186D23.
(S/N S2718+)POWER SHAFT 7/8 HEX LH195-381D23.
Refer to Right Hand Wing Clutch
Fertilizer (195-186K) for breakdown
(S/N S2718+)RHSNB 5/16-18X3/4 GR5802-092C29.
(S/N S2718+)WASHER MACH 1.50 X 1.00 X 18GA804-061C30.
(S/N S2718+)7/8 HEX WASHER X .21195-376D31.
01/30/14 - 93 - 195-110P
Page 94
Table of Contents Part Number Index
Right Hand Drive Fertilizer (Continued)
(Applies to 3S-3000, 3S-3000F only)
16426
195-110P - 94 - 01/30/14
Page 95
Table of Contents Part Number Index
Right Hand Drive Fertilizer (Continued)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg16426
U-BOLT 1/2-13 X 6 1/32 X 7 1/4806-060C1.
NUT LOCK 1/2-13 PLT803-019C2.
FERTILIZER DRIVE SUBASSY LH195-184S3.
SPKT 40B12 7/8 HEX BORE W/SS808-143C6.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
Refer to "Fertilizer Drive Subassy
(195-184S)" forbreakdown.
(S/N S1401-) Used with 136-118D.CHAIN RL #40 X 16 PITCHES809-146C4.
3rd Revision.CHAIN RL #40 59 PITCHES136-151D5.
2nd Revision.CHAIN RL #40 43 PITCHES136-118D5.
1st Revision.RPBY 136-118D809-160C5.
3rd Revision.CHAIN RL #40 109 PITCHES W/CON136-207D7.
2nd Revision.CHAIN RL #40 109 PITCHES136-044D7.
1st Revision.RPBY 136-044D809-045C7.
01/30/14 - 95 - 195-110P
Page 96
Table of Contents Part Number Index
Right Hand Drive Point Row (Option) (S/N S1562-)
(Applies to 3S-3000, 3S-3000F only)
17023
195-110P - 96 - 01/30/14
Page 97
Table of Contents Part Number Index
Right Hand Drive Point Row (Option) (S/N S1562-)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg17023
PIN LINCH 3/16 X 1 9/16 LONG805-240C1.
RPBY 808-259C195-137H2.
SPKT 40B23T WITH 7/8 HEX HUB195-134H3.
SPKT 40B34T WITH 7/8 HEX HUB195-135H4.
RPBY 808-258C195-136H5.
FLANGETTE 52 MST822-032C6.
BRG 7/8HEXX2.05OD SPH822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
CHAIN RL #40 X 68 PITCH W/CON809-149C11.
3S-3000F LH WING CLUTCH ASSY195-187K12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
SHAFT 7/8 HEX, POINT ROW-RH195-232D14.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/4 GR5802-099C20.
CHAIN RL #40 129 PITCHES136-122D21.
SPKT 40B12 7/8 HEX BORE W/SS808-143C23.
Refer to "Left Hand Wing Clutch
Fertilizer (195-187K)" for breakdown
S/N S1399+SPKT 50A57 WITH 7/8 HEX HUB195-264H22.
S/N S1398-SPKT 40B57T WITH 7/8 HEX HUB195-139H22.
Drives
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 97 - 195-110P
Page 98
Table of Contents Part Number Index
Right Hand Drive Point Row (Option) (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
21633
195-110P - 98 - 01/30/14
Page 99
Table of Contents Part Number Index
Right Hand Drive Point Row (Option) (S/N S1563+)
(Applies to 3S-3000, 3S-3000F only)
Image No.dwg21633
PIN LYNCH 3/16 X 1 9/16 LONG805-240C1.
SPKT 40B14 X 7/8 HEX BORE808-259C2.
SPKT 40C23 X 7/8 HEX BORE808-256C3.
SPKT 40B34 X 7/8 HEX BORE808-257C4.
SPKT 40B72 X 7/8 HEX BORE808-258C5.
FLANGETTE 52 MST822-032C6.
BRG.7/8HEX BR 52MM SPHRICAL OD822-119C7.
WASHER LOCK SPRING 5/16 PLT804-009C8.
NUT HEX 5/16-18 PLT803-008C9.
SEED JACK SHAFT 7/8 HEX WING195-169D10.
CHAIN RL #40 69 PITCHES136-052D11.
CHAIN RL #40 X 68 P809-149C11.
3S-3000F LH WING CLUTCH ASSY195-187K12.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C13.
RHSNB 5/16-18X1 GR5802-282C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
WASHER FLAT 1/2 USS HARD PLT804-113C17.
NUT HEX JAM 1/2-13 PLT803-036C18.
NO. 40 12T IDLER SPKT.817-025C19.
HHCS 1/2-13X3 1/2 GR5802-041C20.
CHAIN RL #40 129 PITCHES136-122D21.
SPKT 50C57 RATCHET DRIVE195-320S22.
SPKT 40B12 7/8 HEX BORE W/SS808-143C23.
HHCS 1/2-13X4 1/2 GR5802-413C24.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C25.
CLUTCH, SIDE PLATE TAPPED402-050D26.
SPKT 50A57 SPECIAL BORE808-449C27.
POLYURETHANE ROD SPRING 5/16 L402-376D28.
HUB RATCHET SPKT #50890-954C29.
KEY RATCHET CLUTCH #50 SPKT403-751D30.
CLUTCH, SIDE PLATE C/BORED402-051D31.
HSHCS 1/4-20X7/8802-418C32.
Refer to Left Hand Wing Clutch
Fertilizer (195-187K) for breakdown
(S/N S2717-) Used with 195-264HSHAFT 7/8 HEX, POINT ROW-RH195-232D14.
(S/N S2718+) Used with 195-320S7/8 HEX SHAFT POINT ROW-RH195-459D14.
(S/N S2717-)SPKT 50A57 WITH 7/8 HEX HUB195-264H22.
Shown (S/N S2718+) Includes items
26-32
Drives
RevisionCommentsPart DescriptionPart No.Ref.
01/30/14 - 99 - 195-110P
Page 100
Table of Contents Part Number Index
Center Drive
(Applies to 3S-3000, 3S-3000F only)
15460
195-110P - 100 - 01/30/14
Loading...