Great Plains 3PYP User Manual

Table of Contents Part Number Index

Parts Manual

3 Point ®Yield-Pro Planter

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

25050

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2013 Printed 11/21/13 401-312P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

Frame..............................................................................8

Down Pressure Hydraulics to Frame...................................8

Fan To Frame (S/N A1008S-)............................................10

Fan To Frame (S/N A1009S+)...........................................12

Hopper Box To Frame.......................................................14

LED Lights and Harness (S/N A1057S+)..........................16

Lights and Harness (S/N A1056S-)...................................18

Mainframe (S/N A1001S-).................................................20

Mainframe (S/N A1002S) - (S/N A1024S).........................22

Mainframe (S/N A1025S) - (S/N A1052S).........................24

Mainframe (S/N A1053S+)................................................26

Mainframe To Rear Frame (S/N A1024S-)........................28

Mainframe To Rear Frame (S/N A1025S+).......................30

Seed Delivery....................................................................32

Air Box (S/N A1006S-)......................................................36

Air Box (S/N A1007S+).....................................................38

Walkboard.........................................................................40

Wing To Frame..................................................................42

Row-Pro and Tru-Count Compressor Mounts...................44

Transport......................................................................46

Hydraulic Steering (S/N A1055S-)....................................46

Hydraulic Steering (S/N A1056S+)...................................48

Transpor t Casters And Wheels (S/N A1055S-).................50

Transpor t Casters And Wheels (S/N A1056S+)................54

Drive.............................................................................56

Contact Drive....................................................................56

Contact Drive Gauge Wheel..............................................60

Hydraulic Drive..................................................................64

Hydraulic Drive Components............................................68

Non Drive Contact Gauge Wheel......................................70

Transmission Drive............................................................72

Tru-Count Clutch Assembly...............................................74

Meter.............................................................................77

12FP Corn Meter (890-856C) 12FP Sunflower Meter

(890-912C)..................................................................78

25 Series Corn Meter (6FP 403-169K) (12FP 403-158K) (12

FP Sunflower 403-203K)............................................80

25 Series Singulating Meter (403-156K)...........................82

6FP Corn Meter (890-857C).............................................86

Opener..........................................................................88

25 Series Opener Arms & Mounts....................................88

25 Series Opener Body.....................................................92

Hub Assembly (815-255C & 204-084S)............................96

Rigid 13" Row Cleaner......................................................98

Row Cleaner Unit Mount Assembly (S/N A1006S-)........100

Row Cleaner Unit Mount Assembly (S/N A1007S+).......102

Row Cleaner Extension Mount........................................104

Row-Pro..........................................................................106

Seed Lok.........................................................................110

25 Series Keeton Seed Firmer (Option)..........................112

Side Depth Wheel Assembly...........................................114

25 Series Side Depth Wheel Scraper Assembly.............116

Single Arm RC Assembly................................................118

Unit Mount Coulter..........................................................120

Press Wheels.............................................................122

Press Wheel Assembly (S/N A1024S-)...........................122

Press Wheel Assembly (S/N A1025S - A1055S)............124

Press Wheel Assembly (S/N A1056S - A1056S)............126

12-12D Cast Press Wheels (S/N A1057S+)....................128

Press Wheel Assembly 1X12 & 1.25X13.5 (S/N

A1057S+)..................................................................130

Press Wheel Assembly LH Short (S/N A1024S-)............132

Press Wheel Assembly LH Short (S/N A1025S -

A1055S)....................................................................134

Press Wheel Assembly LH Short (S/N A1056S -

A1056S)....................................................................136

Press Wheel Assembly RH Long (S/N A1024S-)............138

Press Wheel Assembly RH Long (S/N A1025S -

A1055S)....................................................................140

Press Wheel Assembly RH Long (S/N A1056S -

A1056S)....................................................................142

Press Wheel Assembly Front With Cast Wheels.............144

Press Wheel Assembly Rear With Cast Wheels.............146

Press Wheel Assembly With Spider Wheels (S/N

A1055S-)...................................................................148

Press Wheel Assembly With Spider Wheels (S/N A1056S -

A1056S)....................................................................150

Press Wheel Assembly With Spider Wheels (S/N

A1057S+)..................................................................152

Closing Wheel Drop mount.............................................154

Press Wheel Breakdown.................................................156

Hydraulics..................................................................158

Down Pressure And Lift Hydraulics (S/N A1006S-)........158

Down Pressure and Lift Hydraulics (S/N A1007S) - (S/N

A1024S)....................................................................160

Down Pressure and Lift Hydraulics (S/N A1025S+)........162

Fan Hydraulics (For planters w/o steering).....................164

Fan With Steering Hydraulics (S/N A1024S-).................166

© Copyright 2013 All rights reserved Printed 11/21/13

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

401-312P - 2 - 11/21/13

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

Table of Contents Part Number Index

Table of Contents (continued)

Fan With Steering Hydraulics (S/N A1025S) - (S/N

A1055S)...............................................................168

Fan With Steering Hydraulics (S/N A1056S+)............170

Hydraulic Hose Grips.................................................174

Fasse 3 Way Multiplier (810-527C)............................176

Fasse 3 Way Multiplier (810-636C)............................178

Hydraulic Cylinder (810-305C) 3 x 8 x 1.5 Rod..........180

Hydraulic Cylinder 810-592C (5 x 29.5 x 1.50)..........182

Hydraulic Cylinder 810-593C (3 x 13 x 1.25 Rod)......184

Hydraulic Cylinder 810-594C (3.25 x 13 x 1.25 Rod)..186

Hydraulic Cylinder 810-595C (3 x 24 x 1.5 Rod)........188

Hydraulic Cylinder 810-596 (3 x 8 x 1.25 Rod)..........190

Hydraulic Cylinder 810-597C (4 x 4 x 1.25 Rod)........192

Hydraulic Cylinder 810-628C (2 x 13 x 1.125 Rod).....194

Hydraulic Cylinder 810-633C (3 x 8 x 1.5 Rod)..........196

Hydraulic Cylinder 810-635C (3 x 8 x 1.5 Rod)..........198

Hydraulic Cylinder 810-699C (3 x 15 x 1.5 Rod)........200

Hydraulic Cylinder 810-700C (3 x 15 x 1.5 Rod)........202

Lift Hydraulics (For planters w/locked wings only) (S/N

A1006S-)..............................................................204

Lift Hydraulics (For planters w/locked wings only) (S/N

A1007S) - (S/N A1024S).....................................206

Lift Hydraulics (For planters w/locked wings only) (S/N

A1025S+).............................................................208

Lift With Flex Wing Hydraulics (S/N A1006S-)............210

Lift with Flex Wing Hydraulics (S/N A1007S) - (S/N

A1024S)...............................................................212

Lift with Flex Wing Hydraulics (S/N A1025S+)...........214

Pilot Operated Check Valve (810-086C).....................216

Pressure Reducing Valve (810-301C)........................218

Sequence Valve (810-422C)......................................220

Steering Control Valve (302-421) (S/N A1025S+)......222

Steering Control Valve (810-600C) (S/N A1024S-).....224

Wing Fold And Marker Hydraulics..............................226

Wing Fold Hydraulics (For planters w/o mark ers only).228

Decals....................................................................230

Decals........................................................................230

Monitor...................................................................232

Monitor.......................................................................232

Fertilizer.................................................................235

Fertilizer Contact Wheel Breakdown (S/N A1055S-)...236
Fertilizer Contact Wheel Breakdown (S/N A1056S+)..240

Fertilizer Contact Wheel Lock Up (S/N A1056Q+).....244

Fertilizer Plumbing.....................................................246

John-Blue Pump (831-068C).....................................248

Marker....................................................................250

Marker........................................................................250

Marker Disk And Hub (113-790S)..............................254

Options..................................................................256

Fasse Switch Box (S/N 1024S-).................................256

Fasse Switch Box (S/N 1025S+)................................258

Linear Steering Sensor (401-541S)...........................260

Steering Controls (S/N 1024S-).................................262

Steering Controls (S/N 1025S+).................................264

Part Number Index................................................266

11/21/13 - 3 - 401-312P

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

1

12-12D Cast Press Wheels (S/N A1057S+)....................128

12FP Corn Meter (890-856C) 12FP Sunflower Meter

(890-912C)..................................................................78

2

25 Series Corn Meter (6FP 403-169K) (12FP 403-158K) (12

FP Sunflower 403-203K)............................................80

25 Series Keeton Seed Firmer (Option)..........................112

25 Series Opener Arms & Mounts....................................88

25 Series Opener Body.....................................................92

25 Series Side Depth Wheel Scraper Assembly.............116

25 Series Singulating Meter (403-156K)...........................82

6

6FP Corn Meter (890-857C).............................................86

A

Air Box (S/N A1006S-)......................................................36

Air Box (S/N A1007S+).....................................................38

C

Closing Wheel Drop mount.............................................154

Contact Drive....................................................................56

Contact Drive Gauge Wheel..............................................60

D

Decals.............................................................................230

Down Pressure And Lift Hydraulics (S/N A1006S-)........158

Down Pressure and Lift Hydraulics (S/N A1007S) - (S/N

A1024S)....................................................................160

Down Pressure and Lift Hydraulics (S/N A1025S+)........162

Down Pressure Hydraulics to Frame...................................8

F

Fan Hydraulics (For planters w/o steering).....................164

Fan To Frame (S/N A1008S-)............................................10

Fan To Frame (S/N A1009S+)...........................................12

Fan With Steering Hydraulics (S/N A1024S-).................166

Fan With Steering Hydraulics (S/N A1025S) - (S/N

A1055S)....................................................................168

Fan With Steering Hydraulics (S/N A1056S+).................170

Fasse 3 Way Multiplier (810-527C).................................176

Fasse 3 Way Multiplier (810-636C).................................178

Fasse Switch Box (S/N 1024S-)......................................256

Fasse Switch Box (S/N 1025S+).....................................258

Fertilizer Contact Wheel Breakdown (S/N A1055S-).......236

Fertilizer Contact Wheel Breakdown (S/N A1056S+)......240

Fertilizer Contact Wheel Lock Up (S/N A1056Q+)..........244

Fertilizer Plumbing..........................................................246

H

Hopper Box To Frame.......................................................14

Hub Assembly (815-255C & 204-084S)............................96

Hydraulic Cylinder (810-305C) 3 x 8 x 1.5 Rod...............180

Hydraulic Cylinder 810-592C (5 x 29.5 x 1.50)...............182

Hydraulic Cylinder 810-593C (3 x 13 x 1.25 Rod)...........184

Hydraulic Cylinder 810-594C (3.25 x 13 x 1.25 Rod)......186

Hydraulic Cylinder 810-595C (3 x 24 x 1.5 Rod).............188

Hydraulic Cylinder 810-596 (3 x 8 x 1.25 Rod)...............190

Hydraulic Cylinder 810-597C (4 x 4 x 1.25 Rod).............192

Hydraulic Cylinder 810-628C (2 x 13 x 1.125 Rod).........194

Hydraulic Cylinder 810-633C (3 x 8 x 1.5 Rod)...............196

Hydraulic Cylinder 810-635C (3 x 8 x 1.5 Rod)...............198

Hydraulic Cylinder 810-699C (3 x 15 x 1.5 Rod).............200

Hydraulic Cylinder 810-700C (3 x 15 x 1.5 Rod).............202

Hydraulic Drive..................................................................64

Hydraulic Drive Components............................................68

Hydraulic Hose Grips......................................................174

Hydraulic Steering (S/N A1055S-)....................................46

Hydraulic Steering (S/N A1056S+)...................................48

J

John-Blue Pump (831-068C)..........................................248

L

LED Lights and Harness (S/N A1057S+)..........................16

Lift Hydraulics (For planters w/locked wings only) (S/N

A1006S-)...................................................................204

Lift Hydraulics (For planters w/locked wings only) (S/N

A1007S) - (S/N A1024S)..........................................206

Lift Hydraulics (For planters w/locked wings only) (S/N

A1025S+)..................................................................208

Lift With Flex Wing Hydraulics (S/N A1006S-)................210

Lift with Flex Wing Hydraulics (S/N A1007S) - (S/N

A1024S)....................................................................212

Lift with Flex Wing Hydraulics (S/N A1025S+)................214

Lights and Harness (S/N A1056S-)...................................18

Linear Steering Sensor (401-541S)................................260

M

Mainframe (S/N A1001S-).................................................20

Mainframe (S/N A1002S) - (S/N A1024S).........................22

Mainframe (S/N A1025S) - (S/N A1052S).........................24

Mainframe (S/N A1053S+)................................................26

Mainframe To Rear Frame (S/N A1024S-)........................28

Mainframe To Rear Frame (S/N A1025S+).......................30

Marker.............................................................................250

Marker Disk And Hub (113-790S)...................................254

Monitor............................................................................232

N

Non Drive Contact Gauge Wheel......................................70

P

Pilot Operated Check Valve (810-086C).........................216

Press Wheel Assembly (S/N A1024S-)...........................122

Press Wheel Assembly (S/N A1025S - A1055S)............124

Press Wheel Assembly (S/N A1056S - A1056S)............126

Press Wheel Assembly 1X12 & 1.25X13.5 (S/N

A1057S+)..................................................................130

401-312P - 4 - 11/21/13

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

Press Wheel Assembly Front With Cast Wheels........144

Press Wheel Assembly LH Short (S/N A1024S-).......132

Press Wheel Assembly LH Short (S/N A1025S -

A1055S)...............................................................134

Press Wheel Assembly LH Short (S/N A1056S -

A1056S)...............................................................136

Press Wheel Assembly Rear With Cast Wheels........146

Press Wheel Assembly RH Long (S/N A1024S-).......138

Press Wheel Assembly RH Long (S/N A1025S -

A1055S)...............................................................140

Press Wheel Assembly RH Long (S/N A1056S -

A1056S)...............................................................142

Press Wheel Assembly With Spider Wheels (S/N

A1055S-)..............................................................148

Press Wheel Assembly With Spider Wheels (S/N A1056S

- A1056S).............................................................150

Press Wheel Assembly With Spider Wheels (S/N

A1057S+).............................................................152

Press Wheel Breakdown............................................156

Pressure Reducing Valve (810-301C)........................218

R

Rigid 13" Row Cleaner.................................................98

Row Cleaner Extension Mount...................................104

Row Cleaner Unit Mount Assembly (S/N A1006S-)....100

Row Cleaner Unit Mount Assembly (S/N A1007S+)...102

Row-Pro.....................................................................106

Row-Pro and Tru-Count Compressor Mounts..............44

S

Seed Delivery...............................................................32

Seed Lok....................................................................110

Sequence Valve (810-422C)......................................220

Side Depth Wheel Assembly......................................114

Single Arm RC Assembly...........................................118

Steering Control Valve (302-421) (S/N A1025S+)......222

Steering Control Valve (810-600C) (S/N A1024S-).....224

Steering Controls (S/N 1024S-).................................262

Steering Controls (S/N 1025S+).................................264

T

Transmission Drive.......................................................72

Transpor t Casters And Wheels (S/N A1055S-)............50

Transpor t Casters And Wheels (S/N A1056S+)...........54

Tru-Count Clutch Assembly..........................................74

U

Unit Mount Coulter.....................................................120

W

Walkboard....................................................................40

Wing Fold And Marker Hydraulics..............................226

Wing Fold Hydraulics (For planters w/o mark ers only).228

Wing To Frame.............................................................42

11/21/13 - 5 - 401-312P

Table of Contents Part Number Index

401-312P - 6 - 11/21/13

Table of Contents Part Number Index

11/21/13 - 7 - 401-312P

Table of Contents Part Number Index

Down Pressure Hydraulics to Frame

(Applies to 3PYP only)

25196

401-312P - 8 - 11/21/13

Table of Contents Part Number Index

Down Pressure Hydraulics to Frame

(Applies to 3PYP only)

Image No.dwg25196
PIN COTTER 3/16 X 2 1/4 PLT805-094C1.

CYL 4 X 4 X 1.25810-597C3.

CLEVIS 1 1/4 ROD END W/SLOT411-027D4.

HHCS 3/8-16X2 GR5802-143C6.
NUT NYLOCK JAM THIN 3/8-16 PLT803-215C7.
WASHER FLAT 1 1/4 SAE PLT804-039C8.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

S/N A1001S-PIN CLEVIS 1 1/4 X 3 3/8 GR5805-196C2.
S/N A1002S+PIN CLEVIS 1 1/4 X 2.69 GR5805-403C2.
Referto "Hydraulic Cylinder 810-597C

(4 x 4 x 1.25 Rod)" for breakdown

Use in place of hydraulic cylindersLUG WELDMENT401-398H5.

11/21/13 - 9 - 401-312P

Table of Contents Part Number Index

Fan To Frame (S/N A1008S-)

(Applies to 3PYP only)

25059

401-312P - 10 - 11/21/13

Table of Contents Part Number Index

Fan To Frame (S/N A1008S-)

(Applies to 3PYP only)

Image No.dwg25059
6 HYDRAULIC FAN KIT W/ SCREEN890-395C1.
WASHER LOCK SPRING 1/4 PLT804-006C2.
HHCS 1/4-20X1 1/4 GR5802-224C3.
DECAL FAN BAFFLE INDEX848-020C4.
CRARY FAN SHUTTER401-363H5.
SCREW RD HD 10-24 X 1 PLT801-055C6.
CRARY FAN SHUTTER DISK411-030D7.
NUT HEX NYLOCK 10-24 PLT803-268C8.
WASHER LOCK #10804-054C9.
CLAMP WRM DRV #96SS (4.75-6.5)800-151C10.
3PYP 6 OD X 17 FAN HOSE816-557C11.
SCREEN FAN COVER890-624C12.
DJ FAN RPM SENSOR THRD HALL466970014S113.
DJ FAN SENSOR MOUNT BRKT401-537D14.
BUSHING, JA X 20 MM890-891C15.
HYD MOTOR 1/8 KEY168-094D16.
NUT HEX FLANGE 1/4-20 PLT803-230C17.
6 FAN HOUSING RH SIDE2112118.
13 FAN IMPELLER1708919.
6 FAN HOUSING LH SIDE2332020.
HFSS 1/4-20X1 GR5802-375C21.
HHCS 3/8-16X1 1/4 GR5802-079C22.
VOLVO HYD MOTOR MOUNT PLT890-899C23.
SCREW HEX SELF TAP 1/4-20X3/4801-081C24.
PARKER F-11 FAN MOTOR810-556C25.
WASHER FLAT 3/8 SAE PLT804-012C26.
WASHER LOCK SPRING 3/8 PLT804-013C27.
NUT HEX 3/8-16 PLT803-014C28.
HHCS 3/8-16X1 GR5802-017C29.
FANINLET RAIN SHIELD817-624C30.
HWH #12-14X3/4802-800C31.
YP FAN MOUNT WLDMNT 2401-203H32.
SPACER FAN411-120D33.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 11 - 401-312P

Table of Contents Part Number Index

Fan To Frame (S/N A1009S+)

(Applies to 3PYP only)

27412

401-312P - 12 - 11/21/13

Table of Contents Part Number Index

Fan To Frame (S/N A1009S+)

(Applies to 3PYP only)

Image No.dwg27412
6 HYD FAN W/CASE DRAIN MOTOR891-131C1.
WASHER LOCK SPRING 1/4 PLT804-006C2.
HHCS 1/4-20X1 GR5802-005C3.
DECAL FAN BAFFLE INDEX848-020C4.
CRARY FAN SHUTTER401-363H5.
SCREW RD HD 10-24 X 1 PLT801-055C6.
CRARY FAN SHUTTER DISK411-030D7.
NUT HEX NYLOCK 10-24 PLT803-268C8.
WASHER LOCK #10804-054C9.
CLAMP WRM DRV #96SS (4.75-6.5)800-151C10.
HOSE 6 IN X 56 AIR816-601C11.
SCREEN FAN COVER890-624C12.
DJ FAN RPM SENSOR THRD HALL466970014S113.
DJ FAN SENSOR MOUNT BRKT401-537D14.
BUSHING, JA X 20 MM890-891C15.
HYD MOTOR 1/8 KEY168-094D16.
NUT HEX FLANGE 1/4-20 PLT803-230C17.
6 FAN HOUSING RH SIDE2112118.
13 FAN IMPELLER1708919.
6 FAN HOUSING LH SIDE2332020.
HFSS 1/4-20X1 GR5802-375C21.
HHCS 3/8-16X1 1/4 GR5802-079C22.
VOLVO HYD MOTOR MOUNT PLT890-899C23.
SCREW HEX SELF TAP 1/4-20X3/4801-081C24.
PARKER F-11 FAN MOTOR810-556C25.
WASHER FLAT 3/8 SAE PLT804-012C26.
WASHER LOCK SPRING 3/8 PLT804-013C27.
NUT HEX 3/8-16 PLT803-014C28.
HHCS 3/8-16X1 GR5802-017C29.
FANINLET RAIN SHIELD817-624C30.
HWH #12-14X3/4802-800C31.
YP FAN MOUNT WLDMNT401-203H32.
BRKT FAN SIDE MNT WLDMT401-518H33.
HHCS 5/8-11X2 1/4 GR5802-057C34.
WASHER LOCK SPRING 5/8 PLT804-022C35.
NUT HEX 5/8-11 PLT803-021C36.
HHCS 1/4-20X1 1/2 GR5802-167C37.
WASHER FLAT 1/4 USS PLT804-075C38.
METER SPACER TUBE403-338D39.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 13 - 401-312P

Hopper Box To Frame

(Applies to 3PYP only)

Table of Contents Part Number Index

25090

401-312P - 14 - 11/21/13

Table of Contents Part Number Index

Hopper Box To Frame

(Applies to 3PYP only)

Image No.dwg25090
BEAN HOPPER SUPPORT FRAME403-142H1.
BULK HOPPER UNLOAD DOOR GUIDE403-159H2.
HOPPER RETAINER SIDE BAR403-214D3.
BULK HOPPER UNLOAD DOOR403-234D4.
HHCS 1/4-20X1 1/2 GR5802-167C5.
HHCS 1/2-13X1 1/4 GR5802-034C6.
HHCS 5/8-11X2 GR5802-055C7.
HHCS 1/4-20X1 1/4 GR5802-224C8.
NUT HEX 5/8-11 PLT803-021C9.
NUT HEX LOCK 1/4-20 FLG803-088C10.
WASHER FLAT 1/4 SAE PLT804-007C11.
WASHER LOCK SPRING 1/2 PLT804-015C12.
WASHER LOCK SPRING 5/8 PLT804-022C13.
RD BUMP STOP 2 X 1 X 1/2-13816-170C14.
HOPPER DOOR TOP SEAL816-477C15.
BULK PLANTER SEED HOPPER W/LID817-556C16.
D-J HOPPER LEVEL SENSOR833-235C17.
HHCS 1/4-20X3/4 GR5802-004C18.
TALC LUBRICANT-5 GAL CONTAINER821-048C19.
EZEE-GLIDE PLUS LUBRICANT-5GAL821-069C19.
WASHER FLAT 5/8 SAE PLT804-021C20.
HHCS 1/4-20X1 3/4 GR5802-370C21.
HOPPER WATER GUARD WLDMNT403-188H22.
WASHER FLAT 1/2 SAE PLT804-016C23.
HHCS 1/4-20X1 GR5802-005C24.
WIRE BASKET807-182C25.
HOPPER STRAINER BASKET SUPPORT403-332D26.
NUT HEX FLANGE 1/4-20 PLT803-230C27.
BRACKET403-407D28.
AIR TRANSFER TUBE CAP403-408D29.
HHCS 7/16-14X1 GR5802-080C30.
NUT HEX 1/4-20 PLT803-006C31.
NUT HEX 7/16-14 PLT803-015C32.
WASHER LOCK SPRING 1/4 PLT804-006C33.
WASHER LOCK 7/16 PLT804-014C34.
WASHER FLAT 7/16 SAE PLT804-041C35.
RUBBER GUARD REAR CTR.OUTER816-245C36.
82 BU AIR PRESSURE PIPE403-403D37.
LOWER AIR PIPE SUPPORT 82 YP403-241H38.
PIN HITCH 1/2 X 6 1/4 W CHAIN805-034C39.
RUBBER LID LATCH816-008C40.
PAN HD 5/16-18 1LG PHILLPS PLT801-176C41.
HOOD BRACKET890-016C42.
HFS 10-24 X 3/4 PLT801-155C43.
WASHER LOCK #10804-054C44.
NUT HEX 10-24 PLT803-001C45.
HHCS 3/8-16X3 3/4 GR5802-026C46.
LID,BULK PLANTER SEED HOPPER817-558C47.
HHCS 5/16-18X1 1/4 GR5802-010C48.
WASHER FLAT 5/16 USS PLT804-010C49.
NUT LOCK 3/8-16 NYLON INSERT803-078C50.
NUT HEX FLG TP LK 5/16-18ZNYCR803-177C51.
LID HINGE YP BULK HOPPER SHORT403-228H52.
WASHER LOCK SPRING 5/16 PLT804-009C53.
NUT HEX 5/16-18 PLT803-008C54.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 15 - 401-312P

Table of Contents Part Number Index

LED Lights and Harness (S/N A1057S+)

(Applies to 3PYP only)

36103

401-312P - 16 - 11/21/13

Table of Contents Part Number Index

LED Lights and Harness (S/N A1057S+)

(Applies to 3PYP only)

Image No.dwg36103
LIGHT, RED LAMP - LED833-696C1.
HHCS 5/16-18X1 1/4 GR5802-010C2.
WASHER LOCK SPRING 5/16 PLT804-009C3.
HOSE CLIP 13/16 ID800-064C4.
7-PIN CONNECTOR HOLDER833-492C5.
AG HARNESS, 10' LEAD - LED833-717C6.
LIGHT HRNSS ENHANCE MODULE LED833-694C7.
LIGHT, AMBER LAMP LED833-697C8.
AG HARNESS, REAR 21' LED833-718C9.
SCREW HEX SELF TAP 1/4-20X3/4801-081C10.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 17 - 401-312P

Table of Contents Part Number Index

Lights and Harness (S/N A1056S-)

(Applies to 3PYP only)

25057

401-312P - 18 - 11/21/13

Table of Contents Part Number Index

Lights and Harness (S/N A1056S-)

(Applies to 3PYP only)

Image No.dwg25057
SINGLE AG LAMP, AMBER/AMBER0026061.
SINGLE AG LAMP, RED/BLANK0026102.
7-PIN CONNECTOR HOLDER1057283.
AG MODULE ASSY1098124.
AG HARNESS, 10' 7-WAY TO 4-WAYX8177-015.
AG HARNESS, REAR 21'X8177_4-046.
HHCS 5/16-18X1 1/4 GR5802-010C7.
HOSE CLIP 13/16 ID800-064C8.
WASHER LOCK SPRING 5/16 PLT804-009C9.
SCREW RD HD 10-24 X 1 PLT801-055C10.
NUT HEX NYLOCK 10-24 PLT803-268C11.
SCREW HEX SELF TAP 1/4-20X3/4801-081C12.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 19 - 401-312P

Table of Contents Part Number Index

Mainframe (S/N A1001S-)

(Applies to 3PYP only)

25056

401-312P - 20 - 11/21/13

Table of Contents Part Number Index

Mainframe (S/N A1001S-)

(Applies to 3PYP only)

Image No.dwg25056
HITCH WELDMENT BOLT-ON401-315H1.
HHCS 3/4-10X2 3/4 GR5802-086C2.
SHIM HITCH FLANGE401-943D3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
NUT HEX 3/4-10 PLT803-027C5.
TOOLBAR CTR W/SEED SUPPORT WLD401-317H6.
U-BOLT 3/4-10 X 7 X 8 1/2806-050C7.
BRACKET PRK STD SUP WLDMT401-273H8.
HHCS 3/4-10X6 1/2 GR5802-360C9.
PIN HITCH 3/4 X 5 1/4 USEABLE805-195C10.
NUT HEX 3/4-10 PLT NYLOCK803-025C11.
LEG PARK STANDOUTER401-276H12.
LEG PRK STD401-275H13.
SCRW SET SQ HD5/8-11X2 BLACK801-216C14.
NUT HEX 5/8-11 PLT803-021C15.
HHCS 1/2-13X2 GR5802-128C16.
PIN HITCH WELD W/ TAB401-305H17.
SPACER 3PT401-316H18.
WASHER LOCK SPRING 1/2 PLT804-015C19.
NUT HEX 1/2-13 PLT803-020C20.
TOP LINK ASM401-519S21.
TOP LINK ARM ASM401-520H22.
TOP LINK MOUNT WA401-521H23.
TOP LINK ARM ASM401-522H24.
PIN 1 1/4 X 7 1/2 W/HOLE411-409D25.
ZERK STAKED800-100C26.
HHCS 3/8-16X2 1/2 GR5802-114C27.
HHCS 3/4-10X7 1/2 GR5802-280C28.
NUT LOCK 3/8-16 NYLON INSERT803-078C29.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C30.
PIN CLEVIS 1 1/4 X 6 USABLE805-311C31.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C32.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 21 - 401-312P

Table of Contents Part Number Index

Mainframe (S/N A1002S) - (S/N A1024S)

(Applies to 3PYP only)

28090

401-312P - 22 - 11/21/13

Table of Contents Part Number Index

Mainframe (S/N A1002S) - (S/N A1024S)

(Applies to 3PYP only)

Image No.dwg28090

PIN ROLL 3/8 X 1 3/4 LG PLT805-161C2.
PIN CLEVIS 1 1/4 X 6 USABLE805-311C3.
HHCS 3/4-10X8 GR5 PLT802-469C4.
WASHER LOCK SPRING 3/4 PLT804-023C5.
NUT HEX 3/4-10 PLT803-027C6.
TUBE 2.25OD X .438W X 2.88 LNG411-444D7.
PLATE, SLIDER TOP LINK411-440D8.
TUBE 2.25OD X 1.38IDX 1.88LNG411-443D9.
PIN CLEVIS 1 1/4 X 5 3/16 USBL805-411C10.
3PYP MAST ASSEMBLY401-536H11.
SHIM HITCH FLANGE401-943D12.
LEG PRK STD401-275H13.
HHCS 3/4-10X2 3/4 GR5802-086C14.
HITCH 3PYP SHORT F/TOP LNK WLD401-537H15.
NUT HEX 5/8-11 PLT803-021C16.
SCRW SET SQ HD5/8-11X2 BLACK801-216C17.
HHCS 1/2-13X4 FTHD802-424C18.
PIN HITCH WELD W/ TAB401-305H19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
SPACER 3PT401-316H22.

PIN CLEVIS 1 1/4 X 6 7/8 USBL805-312C26.
U-BOLT 3/4-10 X 7 X 8 1/2806-050C27.
BRACKET PRK STD SUP WLDMT401-273H28.
HHCS 3/4-10X6 1/2 GR5802-360C29.
PIN HITCH 3/4 X 5 1/4 USEABLE805-195C30.
NUT HEX 3/4-10 PLT NYLOCK803-025C31.
LEG PARK STANDOUTER401-276H32.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Will work with locked wings onlyBRKT TOP LINK WLDMT401-538H1.

Use as neededLOWER 3PT PIN SPACER1/2 THK411-442D23.
Use as neededLOWER 3PT PIN SPACER1/4 THK411-448D24.
Use as neededTUBE 3" X 1 1/2" X 1/2" LONG411-449D25.

11/21/13 - 23 - 401-312P

Table of Contents Part Number Index

Mainframe (S/N A1025S) - (S/N A1052S)

(Applies to 3PYP only)

29105

401-312P - 24 - 11/21/13

Table of Contents Part Number Index

Mainframe (S/N A1025S) - (S/N A1052S)

(Applies to 3PYP only)

Image No.dwg29105
BRKT TOP LINK WLDMT401-538H1.
PIN ROLL 1/4 X 2 1/2 PLT805-117C2.
PIN CLEVIS 1 1/4 X 2.69 GR5805-403C3.
HHCS 3/4-10X8 GR5 PLT802-469C4.
WASHER LOCK SPRING 3/4 PLT804-023C5.
NUT HEX 3/4-10 PLT803-027C6.
LEG PARK STANDOUTER401-276H7.
PLATE, SLIDER TOP LINK411-440D8.
TUBE 2.25OD X 1.38IDX 1.88LNG411-443D9.
PIN CLEVIS 1 1/4 X 5 3/16 USBL805-411C10.
3PYP MAST ASSEMBLY401-536H11.
SHIM HITCH FLANGE401-943D12.
LEG PRK STD401-275H13.
HHCS 3/4-10X2 3/4 GR5802-086C14.
HITCH 3PYP SHORT F/TOP LNK WLD401-537H15.
NUT HEX 5/8-11 PLT803-021C16.
SCRW SET SQ HD5/8-11X2 BLACK801-216C17.
HHCS 1/2-13X4 FTHD802-424C18.
PIN HITCH WELD 5 3/4 USE W/TAB401-593H19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
NUT HEX 3/4-10 PLT NYLOCK803-025C22.

PIN CLEVIS 1 1/4 X 6 USABLE805-311C26.
U-BOLT 3/4-10 X 7 X 8 1/2806-050C27.
BRACKET PRK STD SUP WLDMT401-273H28.
HHCS 3/4-10X6 1/2 GR5802-360C29.
PIN HITCH 3/4 X 5 1/4 USEABLE805-195C30.
BRKT STEERING VLV BOLT ON411-341D31.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C32.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Use as neededLOWER 3PT PIN SPACER1/2 THK411-442D23.
Use as neededLOWER 3PT PIN SPACER1/4 THK411-448D24.
Use as neededTUBE 3" X 1 1/2" X 1/2" LONG411-449D25.

11/21/13 - 25 - 401-312P

Table of Contents Part Number Index

Mainframe (S/N A1053S+)

(Applies to 3PYP only)

29698

401-312P - 26 - 11/21/13

Table of Contents Part Number Index

Mainframe (S/N A1053S+)

(Applies to 3PYP only)

Image No.dwg29698
BRKT TOP LINK WIDE WLDMT401-629H1.
PIN ROLL 1/4 X 2 1/2 PLT805-117C2.
PIN CLEVIS 1 1/4 X 6 USABLE805-311C3.
HHCS 3/4-10X8 GR5 PLT802-469C4.
WASHER LOCK SPRING 3/4 PLT804-023C5.
NUT HEX 3/4-10 PLT803-027C6.
LEG PARK STANDOUTER401-276H7.
PLATE, SLIDER TOP LINK411-440D8.
TUBE 2.25OD X 1.38IDX .94LNG411-443D9.
PIN CLEVIS 1 1/4 X 5 3/16 USBL805-411C10.
3PYP MAST ASSEMBLY401-536H11.
SHIM HITCH FLANGE401-943D12.
LEG PRK STD401-275H13.
HHCS 3/4-10X2 3/4 GR5802-086C14.
HITCH 3PYP OFFSET F/TOP LNK401-628H15.
NUT HEX 5/8-11 PLT803-021C16.
SCRW SET SKT HD5/8-11X2 BLACK801-216C17.
HHCS 1/2-13X4 FTHD802-424C18.
PIN HITCH WELD W/ TAB401-305H19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
NUT HEX 3/4-10 PLT NYLOCK803-025C22.
LOWER 3PT PIN SPACER1/2 THK411-442D23.
LOWER 3PT PIN SPACER1/4 THK411-448D24.
TUBE 3" X 1 1/2" X 1/2" LONG411-449D25.
PIN 1 1/4 X 6.75 LONG411-607D26.
U-BOLT 3/4-10 X 7 X 8 1/2806-050C27.
BRACKET PRK STD SUP WLDMT401-273H28.
HHCS 3/4-10X6 1/2 GR5802-360C29.
PIN HITCH 3/4 X 5 1/4 USEABLE805-195C30.

PIN, HAIR COTTER 3/16 WIRE DIA805-088C32.
SPACER 3 PT 1 1/2 X 2401-630H33.
HHCS 1/2-13X1 3/4 GR5802-082C34.
HHCS 1/2-13X2 1/4 GR5802-038C35.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

(S/N 1024S-)BRKT STEERING VLV BOLT ON411-341D31.
(S/N 1025S+)BRKT FRWD STR VLV BLK411-616D31.

(S/N 1025S+) Used with 411-616DHHCS 3/4-10X3 GR5802-383C36.

11/21/13 - 27 - 401-312P

Table of Contents Part Number Index

Mainframe To Rear Frame (S/N A1024S-)

(Applies to 3PYP only)

25053

401-312P - 28 - 11/21/13

Table of Contents Part Number Index

Mainframe To Rear Frame (S/N A1024S-)

(Applies to 3PYP only)

Image No.dwg25053
HHCS 1-8X18 GR5802-728C1.
WASHER FLAT 1 SAE804-029C2.
40P CASTER INNER PIVOT TUBE196-654D3.
NUT HEX 1-8 PLT803-031C4.
WASHER LOCK SPRING 1 PLT804-027C5.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C6.

BUSHING 1 7/8X1 5/8X1 1/2 SPLT890-666C8.
PIN CLEVIS 1 X 3 5/16 HRD PLT805-239C9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
MNT PARALLEL ARM W/O RETAINERS401-272H11.
40P CASTER PARALLEL ARM WLDMT196-287H12.
GREASE ZERK STRAIGHT 1/4-28800-001C13.
TOOLBAR CTR W/SEED SUPPORT WLD401-317H14.
SEED BIN SUPPORT STRCTR ASM401-269H15.
BUSHING CYL 1 1/4 X 1 X 1890-005C16.
HHCS 5/8-11X2 1/4 GR5802-057C17.
WASHER LOCK SPRING 5/8 PLT804-022C18.
NUT HEX 5/8-11 PLT803-021C19.
BRKT LIFT SWITCH 3PYP401-795D20.
DJ SWITCH SPDT W/WISKER & WIRE464820520S121.
HHCS 5/16-18X1 1/2 GR5802-012C22.
WASHER FLAT 5/16 USS PLT804-010C23.
NUT HEX 5/16-18 PLT803-008C24.
CYL 2X13X1.125 ROD (TIE)810-628C25.

MNT PARALLEL ARM W/ RETAINERS401-274H26.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

S/N A1009S+PIN CLEVIS 1 X 3 11/16 PLT805-079C7.

Referto HydraulicCylinder (810-628C)

for breakdown

S/N A1009S+HOOK WLDMT401-515H27.
S/N A1009S+PIN COTTER 3/16 X 2 1/4 PLT805-094C28.

11/21/13 - 29 - 401-312P

Table of Contents Part Number Index

Mainframe To Rear Frame (S/N A1025S+)

(Applies to 3PYP only)

29108

401-312P - 30 - 11/21/13

Table of Contents Part Number Index

Mainframe To Rear Frame (S/N A1025S+)

(Applies to 3PYP only)

Image No.dwg29108
HHCS 1-8X18 GR5802-728C1.
WASHER FLAT 1 SAE804-029C2.
40P CASTER INNER PIVOT TUBE196-654D3.
NUT HEX 1-8 PLT803-031C4.
WASHER LOCK SPRING 1 PLT804-027C5.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C6.
PIN CLEVIS 1 X 3 11/16 PLT805-079C7.
BUSHING 1 7/8X1 5/8X1 1/2 SPLT890-666C8.
PIN CLEVIS 1 X 3 5/16 HRD PLT805-239C9.
PIN COTTER 3/16 X 1 3/4 PLT805-017C10.
BRKT PARL ARM MOVABLE401-585H11.
40P CASTER PARALLEL ARM WLDMT196-287H12.
GREASE ZERK STRAIGHT 1/4-28800-001C13.
TOOLBAR CTR W/SEED SUPPORT WLD401-317H14.
SEED BIN SUPPORT STRCTR ASM401-269H15.
BUSHING CYL 1 1/4 X 1 X 1890-005C16.
HHCS 5/8-11X2 1/4 GR5802-057C17.
WASHER LOCK SPRING 5/8 PLT804-022C18.
NUT HEX 5/8-11 PLT803-021C19.
BRKT LIFT SWITCH 3PYP401-795D20.
DJ SWITCH SPDT W/WISKER & WIRE464820520S121.
HHCS 5/16-18X1 1/2 GR5802-012C22.
WASHER FLAT 5/16 USS PLT804-010C23.
NUT HEX 5/16-18 PLT803-008C24.
CYL 2X13X1.125 ROD (TIE)810-628C25.

PIN COTTER 3/16 X 2 1/4 PLT805-094C26.
HOOK WLDMT401-515H27.

NUT LOCK 3/8-16 NYLON INSERT803-078C29.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Referto HydraulicCylinder (810-628C)

for breakdown

Shear BoltHHCS 3/8-16X3 1/2 GR5802-147C28.

11/21/13 - 31 - 401-312P

Seed Delivery

(Applies to 3PYP only)

Table of Contents Part Number Index

25058

401-312P - 32 - 11/21/13

Seed Delivery

(Applies to 3PYP only)

Image No.dwg25058

RPBY 827-088C817-730C5.

TUBE SEED DELIVERY 46 AL827-088C5.

TUBE SEED DELIVERY 10 AL827-084C9.

TUBE SEED DELIVERY 83 AL827-090C10.

SUPPORT L WING SEED TUBE OUTER411-619D11.
U-BOLT 5/16-18X1 1/2X2 1/2 RND806-192C12.

PLANTER Y-TRANSITION ASY401-251S14.
CLAMP WRM DRV #24 SS (1.06-2)800-124C15.
O-RING 1 1/2 IDX1 7/8 ODX3/16816-499C16.
AIR PLANTER HOSE SPLITTER401-719D17.
SHOULDER BOLT1/4X1/4X10-24802-481C18.
Y-TUBE GATE817-595C19.

SEED DISCHARGE HOSE 42817-613C21.
HOSE BOOT LOCK RING817-610C22.

Table of Contents Part Number Index

36" LH Outer WingSUPPORT L WING SEED TUBE 36IN401-282H1.
36" RH Outer WingSUPPORT R WING SEED TUBE 36IN401-283H1.
38" LH Outer WingSUPPORT L WING SEED TUBE 38IN401-284H1.
38" RH Outer WingSUPPORT R WING SEED TUBE 38IN401-285H1.
40" LH Outer WingSUPPORT L WING SEED TUBE 30IN401-280H1.
40" RH Outer WingSUPPORT R WING SEED TUBE 30IN401-281H1.
Inner WingBRACKET WING SEED TUBE WLDMT401-279H2.
RH CenterBRKT WLDMT CTR SEED TUBE RH401-287H3.
LH CenterBRKT WLDMT CTR SEED TUBE LH401-286H3.
RearSUPPORT REAR SEED TUBE401-278H4.
Rear, 36" & 38" LH/RH Outer Wing

(S/N A1024S-)

Rear, 36" & 38" LH/RH Outer Wing

(S/N A1025S+)
40" LH/RH Center (S/N A1024S-)RPBY 827-096C817-740C5.
40" LH/RH Center (S/N A1025S+)SEED DELIVERY TUBE 042 AL827-096C5.
36" LH/RH Center (S/N A1024S-)RPBY 827-084C817-726C6.
36" LH/RH Center (S/N A1025S+)TUBE SEED DELIVERY 10 AL827-084C6.
36" LH/RH Center (S/N A1024S-)RPBY 827-081C817-575C6.
40" LH/RH Center (S/N A1025S+)SEED DELIVERY TUBE 24 AL827-081C6.
36" LH/RH Center (S/N A1024S-)RPBY 827-089C817-731C7.
36" LH/RH Center (S/N 1025S+)TUBE SEED DELIVERY 50 AL827-089C7.
36" LH/RH Center (S/N A1024S-)RPBY 827-092C817-735C7.
38" LH/RH Center (S/N A1025S+)TUBE SEED DELIVERY 53 AL827-092C7.
36" LH/RH Center (S/N A1024S-)RPBY 827-086C817-728C7.
38" LH/RH Center (S/N A1025S+)TUBE SEED DELIVERY 30 AL827-086C7.
36" LH/RH Center (S/N A1024S-)RPBY 827-083C817-617C7.
40" LH/RH Center (S/N A1025S+)SEED DELIVERY TUBE 60 AL827-083C7.
36" LH/RH Center (S/N 1024S-)RPBY 827-087C817-729C8.
36"LH/RH InnerWing (S/N A1025S+)TUBE SEED DELIVERY 45 AL827-087C8.
36" LH/RH Center (S/N A1024S-)RPBY 827-084C817-726C9.
30", 36" & 38" LH/RH Center (S/N

A1025S+)
36" LH/RH Center (S/N A1024S-)RPBY 827-085C817-727C9.
30" LH/RH Center (S/N A1025S+)TUBE SEED DELIVERY 13 AL827-085C9.
36" LH/RH Center (S/N A1024S-)RPBY 827-091C817-734C9.
40"LH/RH Outer Wing (S/N A1025S+)TUBE SEED DELIVERY 98 AL827-091C9.
36" LH/RH Center (S/N A1024S-)RPBY 827-090C817-732C10.
36" & 38" LH/RH Outer Wing (S/N

A1025S+)
36" LH/RH Center (S/N A1024S-)RPBY 827-091C817-734C10.
30"LH/RH Outer Wing (S/N A1025S+)TUBE SEED DELIVERY 98 AL827-091C10.
36" LH/RH Center (S/N A1024S-)RPBY 827-098C817-742C10.
40" LH/RH Outer Wing (S/N 1025S+)SEED DELIVERY TUBE 073 AL827-098C10.

30", 36", 38" & 12 RowAIR TUBE SUPPORT CLAMP401-528D13.
30" & 16 RowBRACKET SEED TUBE SUPPORT401-800D13.

Includes items 15, 16, 18, 19 & 44AIR PLANTER HOSE ADPTR W/GATE401-955S20.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 33 - 401-312P

Table of Contents Part Number Index

Seed Delivery (continued)

(Applies to 3PYP only)

CAP PLUG 1 1/2 O.D. TUBE817-457C23.
WASHER FLAT 5/16 USS PLT804-010C24.
NUT HEX NYLOCK 5/16-18 PLT803-084C25.
HHCS 5/16-18X2 1/2 GR5802-172C26.
HOSE 1 1/2 HI-TECH UFD-AP990-230R27.
U-BOLT 5/8-11 X 7 1/32 X 8 1/2806-052C28.
WASHER LOCK SPRING 5/8 PLT804-022C29.
NUT HEX 5/8-11 PLT803-021C30.
HHCS 3/8-16X1 1/4 GR5802-079C31.
WASHER LOCK SPRING 5/16 PLT804-009C32.
NUT HEX 5/16-18 PLT803-008C33.
HHCS 1/2-13X3 3/4 GR5802-042C34.
WASHER FLAT 1/2 USS HARD PLT804-113C35.
TUBE RND 1 OD X 7/32W X 2.13120-306D36.
IDLER SPOOL #50 2.38X1.01X1.31817-456C37.
WASHER LOCK SPRING 1/2 PLT804-015C38.
NUT HEX 1/2-13 PLT803-020C39.
HHCS 1/2-13X1 1/4 GR5802-034C40.
SUPPORT Y-SPLITTER401-290H41.
WASHER LOCK SPRING 1/2 PLT804-015C42.
TUBE CAP 1 1/4 ID TB X 3 LG817-622C43.
AIR PLANTER ADPTR W/GATE421-134D44.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 34 - 11/21/13

Table of Contents Part Number Index

Seed Delivery (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Frame

11/21/13 - 35 - 401-312P

Air Box (S/N A1006S-)

(Applies to 3PYP only)

Table of Contents Part Number Index

22756

401-312P - 36 - 11/21/13

Table of Contents Part Number Index

Air Box (S/N A1006S-)

(Applies to 3PYP only)

Image No.dwg22756
SEAL HOLDER WELDMENT403-165H1.
CORNER SEAL MOUNT WLDMNT403-166H2.
HOPPER LEVEL SENSOR SHROUD403-248D3.
HHCS 1/4-20X1 GR5802-005C4.
HHCS 1/4-20X5/8 GR5802-078C5.
NUT-HEX 1/4-20 PLT803-006C6.
WASHER LOCK SPRING 1/4 PLT804-006C7.
WASHER FLAT 1/4 SAE PLT804-007C8.
WASHER FLAT 1/4 USS PLT804-075C9.
AUX METER TOP SEAL816-478C10.
SEAL TOP CORNER816-479C11.
D-J HOPPER LEVEL SENSOR833-235C12.
WIDE FILL TOP WELDMENT403-164H13.
RICE MANIFOLD MAIN WELDMENT403-161H14.
RICE MANIFOLD SPACERSEPERATOR403-176D15.
MANIFOLD UNLOAD DOOR403-186H16.
DOOR SEAL, PLANTER MANIFOLD816-502C17.
SEED CHAMBER DIVIDER LH403-317D18.
SEED CHAMBER DIVIDER RH403-318D18.
DESTACO HOLD DOWN ACTION CLAMP800-179C19.
HHCS 1/4-20X1 1/2 GR5802-167C20.
SCREW SPAX #8X3/4 PAN HEAD801-187C21.
AIR FLOW FRONT SUBWELDMENT403-137H22.
MANIFOLD TOP SLAT COVER403-177D23.
AIR DEFLECTOR403-316D24.
SEED STRAINER GRATE WLDMNT403-189H25.
CAP PLUG 1 1/2 O.D. TUBE817-457C26.
MANIFOLD SLAT MOUNT PLT403-178D27.
HHCS 5/16-18X5/8802-705C28.
YP MANIFOLD ACCESS DOOR403-345D29.
YP MANIFOLD ACCESS DOOR GASKET816-548C30.
HHCS 3/8-16X1 1/4 GR5802-079C31.
WASHER FLAT 3/8 USS PLT804-011C32.
WASHER LOCK SPRING 3/8 PLT804-013C33.
NUT HEX 3/8-16 PLT803-014C34.
DECAL TALC LUBRICANT YP838-822C35.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 37 - 401-312P

Air Box (S/N A1007S+)

(Applies to 3PYP only)

Table of Contents Part Number Index

36087

401-312P - 38 - 11/21/13

Table of Contents Part Number Index

Air Box (S/N A1007S+)

(Applies to 3PYP only)

Image No.dwg36087
SEAL TOP CORNER816-479C1.
AUX METER TOP SEAL816-478C2.
SEED STRAINER GRATE WLDMNT403-189H3.
SEAL HOLDER WELDMENT403-165H4.
HHCS 1/4-20X5/8 GR5802-078C5.
CORNER SEAL MOUNT WLDMNT403-166H6.
WASHER FLAT 1/4 USS PLT804-075C7.
HHCS 1/4-20X1 GR5802-005C8.
WASHER LOCK SPRING 1/4 PLT804-006C9.
WASHER FLAT 1/4 SAE PLT804-007C10.
NUT HEX 1/4-20 PLT803-006C11.
DJ BIN LEVEL SENSOR466820720S312.
HOPPER LEVEL SENSOR SHROUD403-248D13.
DECAL TALC LUBRICANT YP838-822C14.
WIDE FILL TOP WELDMENT403-239H15.
RICE MANIFOLD MAIN WELDMENT403-237H16.
HHCS 3/8-16X1 1/4 GR5802-079C17.
WASHER FLAT 3/8 USS PLT804-011C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
NUT HEX 3/8-16 PLT803-014C20.
HHCS 5/16-18X5/8 GR5802-705C21.
YP MANIFOLD ACCESS DOOR403-345D22.
YP MANIFOLD ACCESS DOOR GASKET816-548C23.
SEED CHAMBER DIVIDER RH403-318D24.
SEED CHAMBER DIVIDER LH403-317D25.
AIR BOX VANEWLDMNT403-668H26.
MANIFOLD SLAT MOUNT PLT403-178D27.
MANIFOLD TOP SLAT COVER403-177D28.
SCREW SPAX #8X3/4 PAN HEAD801-187C29.
NUT LOCK M16X2803-396C30.
AIR FLOW UPPER GUIDE403-402D31.
CAP PLUG 1 1/2 O.D. TUBE817-457C32.
MANIFOLD INLET WIDE YP403-236H33.
DESTACO HOLD DOWN ACTION CLAMP800-179C34.
DOOR SEAL, PLANTER MANIFOLD816-502C35.
MANIFOLD UNLOAD DOOR403-186H36.
HHCS 1/4-20X1 1/2 GR5802-167C37.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 39 - 401-312P

Walkboard

(Applies to 3PYP only)

Table of Contents Part Number Index

29104

401-312P - 40 - 11/21/13

Walkboard

(Applies to 3PYP only)

Image No.dwg29104
YP WALKBOARD SUPPORT401-252H1.
YP WALKBOARD WLDMMT401-253H2.
HOOP HANDRAIL WELDMENT401-255H3.
UPPER RAIL WLDMNT401-256H4.
RAIL PIVOT MOUNT RH401-744D5.
RAIL PIVOT MOUNT LH401-743D6.
TOP RAIL MIDDLE SECTION401-742D7.
YP LADDER WELDMT401-254H8.
U-BOLT 3/4-10X4 1/32X4 1/2806-007C9.
PIN WIRE SNAP LOCK 3/8 X 3 1/2805-178C10.
HHCS 3/8-16X2 GR5802-143C11.
NUT LOCK 3/8-16 PLT803-013C12.
WALKBOARDLADDER PIVOTBUSHING119-278D13.
HHCS 3/8-16X1 1/4 GR5802-079C14.
HHCS 3/8-16X2 3/4 GR5802-216C15.
MARKER PIVOT PIN113-797D16.
BUSHING 1 3/4 X 1 1/2 X 1 1/2890-264C17.
GREASE ZERK STRAIGHT 1/4-28800-001C18.
HHCS 3/4-10X2 GR5802-064C19.
WASHER LOCK SPRING 3/4 PLT804-023C20.
NUT HEX 3/4-10 PLT803-027C21.
PIN ROLL 3/16 X 2 1/2 LG. PTL.805-062C22.
SPRING COMP 1/2 OD X 1 LG807-096C23.
6 BOLTLOCKOUT PLUNGER172-201D24.
WRENCH HOLDER403-175H25.
SPRING AND WHEEL WRENCH403-265D26.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C27.
NUT FLANGE LOCK 3/8-16 PLT803-209C28.
HFS 3/8-16X1 GR5802-388C29.
MANUAL PAK 1'" W/ GASKET817-516C30.
YP SMV MANUAL PAK HANGER401-697D31.
MINI END WHEEL PRESS WHEEL817-042C32.
NUT HEX FLNG T-LOCK 1/4-20 YLW803-293C33.
HHCS 5/16-18X3/4 GR5802-007C34.
HHCS 1/4-20X1 GR5802-005C35.
NUT-HEX 1/4-20 PLT803-006C36.
WASHER LOCK SPRING 1/4 PLT804-006C37.
DECAL SLOW MOVING-GALV. BACKED818-055C38.
SCREW RD HD 1/4-20 X 5/8801-018C39.
NUT HEX 5/16-18 PLT803-008C40.
WASHER LOCK SPRING 5/16 PLT804-009C41.
SMV MOUNTING BLADE890-153C42.
LATCH WALKBOARD HOLD OPEN411-462D43.
S-HOOK #772 .177 X 1 1/8 PLT800-041C44.
HHCS 1/2-13X1 1/2 GR5802-091C45.
WASHER FLAT 1/2 SAE PLT804-016C46.
NUT LOCK 1/2-13 PLT803-019C47.
STEP EXTENSION RUBBER816-634C48.
STEP SINGLE BOLT-ON401-591H49.

Table of Contents Part Number Index

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 41 - 401-312P

Wing To Frame

(Applies to 3PYP only)

Table of Contents Part Number Index

25052

401-312P - 42 - 11/21/13

Wing To Frame

(Applies to 3PYP only)

Image No.dwg25052
TOOLBAR CTR W/SEED SUPPORT WLD401-317H1.
LINK ARM LOWER WLDMT401-311H2.
STACKING WING WLDMT LEFT401-295H3.
STACKING WING ASM RIGHT401-296H3.
ARM UPPER LINK WLDMT LFT401-297H4.
ARM UPPER LINK WELD RT401-301H4.
CYL LOCK CHANNEL 1 1/2X17 3/4196-292H5.
FLEX ARM WELDMENT 11.5 DEG401-271H6.
CYL 5X29.5X1.5 ROD810-592C7.

CYL PIN NR 1.25X3.63USBX3.13CH196-392H8.
LINK UPPER LIFT ARM WLDMT401-314H9.
NUT HEX 1 1/2-6 PLT803-073C10.
PIN CLEVIS 1 1/4 X 3 3/8 GR5805-196C11.
GREASE ZERK 1/4-28 X 90-DEG800-073C12.
GREASE ZERK STRAIGHT 1/4-28800-001C13.
PIN 1 1/4 X 11 1/4 W/HOLE401-867D14.
PIN 1 3/4 X 19 5/8 W/HOLE401-855D15.
PIN 1 1/2 X 10.75401-868D16.
PIN ROLL 3/8 X 2 1/2 PLT805-255C17.
PIN ROLL 1/4 X 2 1/2 PLT805-117C18.
PIN LINCH 5/16 X 2 11/32805-158C19.
HHCS 3/8-16X2 1/2 GR5802-114C20.
NUT LOCK 3/8-16 NYLON INSERT803-078C21.
BENT PIN 3/8 X 2 1/2 USE W/COT805-152C22.
BUSHING 1 1/2 X 1 1/4 X 1 1/2890-930C23.
BUSHING 2 X 1 3/4 X 2890-933C24.
HHCS 1/2-13X3 1/4 GR5802-099C25.
NUT LOCK 1/2-13 PLT803-019C26.
GREASE ZERK 1/4-28 X 45-DEG800-058C27.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C28.
PAD STOP BLOCK401-964D29.
HHCS 1/2-13x1 3/4 GR5802-082C30.
NUT HEX 1/2-13 PLT803-020C31.
WASHER FLAT 5/8 USS PLT804-019C32.
WASHER FLAT 1 1/4 SAE PLT804-039C33.

Table of Contents Part Number Index

Referto "Hydraulic Cylinder 810-592C

(5 x 29.5 x 1.50 Rod)" forbreakdown

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 43 - 401-312P

Table of Contents Part Number Index

Row-Pro and Tru-Count Compressor Mounts

(Applies to 3PYP only)

34091

401-312P - 44 - 11/21/13

Table of Contents Part Number Index

Row-Pro and Tru-Count Compressor Mounts

(Applies to 3PYP only)

Image No.dwg34091
HHCS 3/8-16X3/4 GR5802-014C1.
RP COMPRESSOR COVER SIDE404-224D2.
WASHER LOCK SPRING 5/8 PLT804-022C3.
NUT HEX 5/8-11 PLT803-021C4.
COMPRESSOR MOUNT BRACKET404-230D5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
NUT HEX 3/8-16 PLT803-014C7.
TRU-COUNT COMPRESSOR ASSEMBLY823-330C8.
MOUNT PLATE404-222D9.
HHCS 3/8-16X1 GR5802-017C10.
COMPRESSOR MOUNT404-209D11.
12V AIR COMPRESSOR831-088C12.
TC COMPRESSOR COVER SIDE R404-226D13.
12 COMPRESSOR COVER TOP404-225D14.
HOSE CLIP 5/8 I.D.800-052C15.
WASHER FLAT 3/8 SAE PLT804-012C16.
U-BOLT 5/8-11 X 7 1/32 X 8 1/2806-052C17.
TC COMPRESSOR COVER SIDE L404-227D18.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 45 - 401-312P

Table of Contents Part Number Index

Hydraulic Steering (S/N A1055S-)

(Applies to 3PYP only)

25054

401-312P - 46 - 11/21/13

Table of Contents Part Number Index

Hydraulic Steering (S/N A1055S-)

(Applies to 3PYP only)

Image No.dwg25054
HFS 10-24 X 1 1/8 PLTD801-096C1.
PLT ADAPTOR STEERING SENSOR411-009D2.
PIN COTTER 3/16 X 1 1/4 PLT805-016C3.
NUT HEX SLOTTED 7/8-14 PLT803-029C4.
END WHEEL SPACERHUB176-026D5.
SEAL GREASE END WHEEL HUB816-038C6.
BEARING CONE 25877822-016C7.
BEARING CUP 25821822-015C8.
HOUSING BEARING401-336H9.
BRG CUP 25520822-013C10.
BEARING CONE 25590822-014C11.
SEAL 3.375 X 2.0 X.438 CR20125816-012C12.
SHAFT STEERING SPINDLE411-008D13.

RETAINER TRUNION401-940D15.

SLEEVE TIEROD 7/8-18 RH/LH890-945C17.
END TIEROD 7/8-18 LHX5/8 TAPER890-946C18.
ARM STEERING WELDMENT401-348H19.
CYL REP 3.0X8X1.50 ROD (WLD)810-305C20.

CYL 3X8 TRUN W/SENSOR810-633C20.

HHCS 5/8-11X1 3/4 GR5802-053C21.
WASHER LOCK SPRING 5/8 PLT804-022C22.
NUT HEX 5/8-11 PLT803-021C23.
HHCS 5/8-11X5 GR5802-062C24.
NUT HEX SLOTTED 5/8-11 PLT GR5803-056C25.
PIN CLEVIS 1 X 3 5/16 HRD PLT805-239C26.
PIN COTTER 1/8 X 1 3/4 PLT805-096C27.
WASHER FLAT #10 SAE PLT804-046C28.
HHCS #10-24X1/2 GR5802-163C29.

KEY 1/2 X 1/2 X 2411-609D32.
SCREW SET SCKT HD 1/2-13 X 1/2801-119C33.

Transport

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 1 - 13, 28 & 29HOUSING BEARING401-352V14.

For 20" and 40" rowsTIEROD TUBE WLDMNT 40 IN ROWS401-424H16.
For 15" and 30" rowsTIEROD TUBE WELDMT 30 IN ROWS401-394H16.
For 38" rowsTIEROD TUBE WELDMT 38 IN ROWS401-393H16.
For 36" rowsTIEROD TUBE WELDMT 36 IN ROWS401-395H16.

S/N A1024S-Refer to "Hydraulic Cylinder 810-305C

(3 x 8 x 1.5 Rod)" for breakdown

S/N A1025S+ (Left Side)Referto "Hydraulic Cylinder 810-633C

(3 x 8 x 1.5 Rod)" for breakdown

S/N A1025S+ (Right Side)CYL 3X8 TRUN810-635C30.
S/N A1025S+SENSOR LIN 8" PWM833-498C31.

11/21/13 - 47 - 401-312P

Table of Contents Part Number Index

Hydraulic Steering (S/N A1056S+)

(Applies to 3PYP only)

31460

401-312P - 48 - 11/21/13

Table of Contents Part Number Index

Hydraulic Steering (S/N A1056S+)

(Applies to 3PYP only)

Image No.dwg31460
PLT TRUNION MOUNT411-704D1.
HHCS 5/8-11X2 1/2 GR5802-058C2.
CYL 3X15 TRUN W/SENSOR810-699C3.

PIN CLEVIS 1 X 4 5/32 USEABLE805-340C4.
PIN COTTER 1/8 X 1 3/4 PLT805-096C5.
NUT HEX SLOTTED 7/8-14 PLT803-029C6.
CYL 3X15 TRUN810-700C7.

TIEROD END 1 1/8-12 LHX7/8 TPR891-220C8.
NUT JAM 1 1/8-12 UNF LH411-720D9.

NUT JAM 1 1/8-12 UNF RH411-719D11.
TIEROD END 1 1/8-12 RHX7/8 TPR891-221C12.
WASHER LOCK SPRING 5/8 PLT804-022C13.

Transport

RevisionCommentsPart DescriptionPart No.Ref.

Referto "Hydraulic Cylinder 810-699C

(3 x 15 x 1.5 Rod)" for breakdown

Referto "Hydraulic Cylinder 810-700C

(3 x 15 x 1.5 Rod)" for breakdown

Used with TR38TIEROD 67.5 X 2 THD LH/RH411-716D10.
Used with TR36TIEROD 63.5 X 2 THD LH/RH411-715D10.
Used with TR40TIEROD 71.5 X 2 THD LH/RH411-717D10.
Used with TR30TIEROD 111.5 X 2 THD LH/RH411-718D10.

11/21/13 - 49 - 401-312P

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1055S-)

(Applies to 3PYP only)

25055

401-312P - 50 - 11/21/13

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1055S-)

(Applies to 3PYP only)

Image No.dwg25055
SEED BIN SUPPORT STRCTR ASM401-269H1.
BRACKET 7X7 TUBESPRT 16.5LG401-773D2.
HHCS 3/4-10X2 3/4 GR5802-086C3.
WASHER LOCK SPRING 3/4 PLT804-023C4.
NUT HEX 3/4-10 PLT803-027C5.
SUPPORT CASTER WELDMENT401-335H6.
HHCS 1/2-13X1 1/4 GR5802-034C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
NTA CASTER RETAINER CAP161-231D9.
STEEL BUSHING 3 1/4X3IDX3LONG890-193C10.
GREASE ZERK STRAIGHT 1/4-28800-001C11.
BULK SEED CASTER VERT SHAFT402-302D12.
PIVOTTHRUST WASHER804-102C13.

Shown (S/N A1025S - S/N A1052S)CSTR WLD HD F/40 TIRE STEER LH401-586H14.
(S/N A1053S+)CSTR WLD HD F/40 TIRE W/O SENS401-635H14.
(S/N A1025S+)CSTR WLD HD F/40 TIRE STEER RH401-587H14.
(S/N A1024S-)CASTER LOWER WLDMT HD STEER LH401-383H14.
(S/N A1024S-)CASTER LOWER WLDMT HD STEER RH401-364H14.

NUT LOCK 3/4-10 PLT803-026C15.
HHCS 3/4-10X6 1/2 GR5802-360C16.

(S/N A1052S-)BRACKET DIRECTION SENSOR411-001D17.
(S/N A1052S-)HHCS 5/16-18X1 GR5802-159C18.
(S/N A1052S-)WASHER LOCK SPRING 5/16 PLT804-009C19.
(S/N A1052S-)WASHER FLAT 5/16 USS PLT804-010C20.
(S/N A1052S-)HHCS 1/4-20X3/4 GR5802-004C21.
(S/N A1052S-)NUT-HEX 1/4-20 PLT803-006C22.
(S/N A1052S-)PLATE WHEEL SENSOR TRIGGER401-941D23.
(S/N A1052S-)SPACER WHEEL SENSOR401-990D24.

HHCS 3/4-10X5 GR5802-069C25.

(S/N A1052S-)SPINDLE SGL 2.73X18815-284C26.
(S/N A1053S+)SPINDLE 2.75 X 16.25815-344C26.
(S/N A1052S-)8-BOLT HUB SEAL816-019C27.
(S/N A1053S+)OIL SEAL CR29968816-595C27.
(S/N A1052S-)BRG CONE 2.00IDX1.18WD #3780822-036C28.
(S/N A1053S+)BEARING CONE 387-AS822-238C28.
(S/N A1052S-)BRG CUP 3.67ODX.93WD #3720822-037C29.
(S/N A1053S+)BRG CUP 3.81D 382A822-107C29.

HUB STUD 5/8-18X2 1/2 GR5802-182C30.

(S/N A1052S-)HUB 8 BLT 5790#W/CAP&STD F/SEN815-288C31.
(S/N A1053S+)HUB 8/BOLT 8000# MACHINEDL758401-831.
(S/N A1052S-)BRG CUP 3.00ODX.75WD #2720822-039C32.
(S/N A1053S+)BRG CUP 2.89ODX.58WD #LM501310822-053C32.
(S/N A1052S-)BRG CONE 1.31IDX1.01WD #2790822-038C33.
(S/N A1053S+)BRG CONE 1.62IDX.78WD#LM501349822-048C33.
(S/N A1052S-)7/8 SPINDLE WASHER, HARDENED181-064D34.
(S/N A1053S+)1 HARDENED SPINDLE WASHER148-404D34.
(S/N A1052S-)NUT HEX SLOTTED 7/8-14 PLT803-029C35.
(S/N A1053S+)NUT HEX SLOTTED 1-14803-095C35.
(S/N A1052S-)PIN COTTER 3/16 X 1 1/4 PLT805-016C36.
(S/N A1053S+)PIN COTTER 7/32 X 2805-060C36.
(S/N A1052S-)HUB CAP890-032C37.
(S/N A1053S+)GREASE CAP 3.125 X .28890-277C37.
(S/N A1052S-)HUB&SPINDL 8BLTF/SENSOR 5790#815-287C38.

HUB/SPINDL 8 BLT F/SENSOR 8000815-345C38.

(S/N A1053S+) Includes items 26 thru

37, 43 & 49
(S/N A1025S+)TIRE/WHL 16.5L-16.1 / 14 PLY814-368C39.
(S/N A1024S-)TIRE/WHL 32-15.5X16.5/G OFF WT814-280C39.

Transport

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 51 - 401-312P

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1055S-) (continued)

(Applies to 3PYP only)

(S/N A1025S+)TIRE 16.5L-16.1 14 PLY IMPL814-366C40.
(S/N A1024S-)TIRE 32-15.50X16.5 LOAD G814-281C40.
(S/N A1025S+)WHEEL 16.1 X 14 8 BLT 6 PILOT814-367C41.

(S/N A1024S-)WHEEL 16.5X12 8BOLT 6PILOT WHT814-291C41.
VALVE STEM METAL TR-575 TUBLES814-210C42.
NUT LUG 5/8-18 X 90 DEG PLT803-219C43.

Used with hydraulic steeringonlyHHCS 5/8-11X3 1/2 GR5802-162C44.

Used with hydraulic steeringonlySPACER STOP STEERING BOLT ON401-998D45.

Used with hydraulic steeringonlySTOP STEERING BOLTON401-999D46.

Used with hydraulic steeringonlyWASHER LOCK SPRING 5/8 PLT804-022C47.

Used with hydraulic steeringonlyNUT HEX 5/8-11 PLT803-021C48.

(S/N A1053S+)GREASE ZERK STRAIGHT 1/8-27NPT800-130C49.
HUB 8 - BOLT (Q75-8)815-299C50.

HUB ASSEMBLY;8-BOLT, 8000LBS815-301C51.

(S/N A1053S+) Includes items 29 thru

32

(S/N A1053S+) Includes items 27 thru

33 & 43

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 52 - 11/21/13

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1055S-) (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Transport

11/21/13 - 53 - 401-312P

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1056S+)

(Applies to 3PYP only)

31455

401-312P - 54 - 11/21/13

Table of Contents Part Number Index

Transport Casters And Wheels (S/N A1056S+)

(Applies to 3PYP only)

Image No.dwg31455
SEED BIN SUPPORT STRCTR ASM401-269H1.
BRACKET 7X7 TUBESPRT 16.5LG401-773D2.
HHCS 3/4-10X2 3/4 GR5802-086C3.
GREASE ZERK STRAIGHT 1/4-28800-001C4.
HHCS 1/2-13X1 1/4 GR5802-034C5.
CAP 5"411-707D6.
SNAP RING EXT 4"800-404C7.
BUSHING 4.5 X 4.0 X 3 CONNEX891-211C8.

ShownSUPPORTCASTER WELDMENT LFT401-728H9.
SUPPORT CASTER WELDMENT RHT401-727H9.
WASHER LOCK SPRING 3/4 PLT804-023C10.
NUT HEX 3/4-10 PLT803-027C11.
STOP 1.5 X 6 ADJ411-705D12.
NUT HEX JAM 1-8 PLT803-030C13.
HHCS 1-8X2 GR5802-634C14.
PIN CLEVIS 3/4 X 2 1/2 PLT805-140C15.
PIN COTTER 1/8 X 1 3/4 PLT805-096C16.
WASHER THRUST 5.0X4.0X.132411-703D17.
STEEL BUSHING 3 1/4X3IDX3LONG890-193C18.

ShownTUBE STEERING PIVOT WLDMT LFT401-724H19.
TUBE STEERING PIVOT WELD RH401-726H19.
RING 1.567 OD X .095 WL X .043800-405C20.
BUSHING SPINDLE 1 1/2X1 1/4X1890-011C21.
GREASE ZERK STRAIGHT 1/8-27NPT800-130C22.
HUB STUD 5/8-18X2 1/2 GR5802-182C23.
NUT LUG 5/8-18 X 90 DEG PLT803-219C24.
WHEEL 16.1 X 14 8 BLT 6 PILOT814-367C25.
SHAFT CASTER 3.0 X 19.97411-706D26.
PIVOTTHRUST WASHER804-102C27.
CSTR WLD HD F/40 TIRE W/O LOCK401-729H28.
NUT HEX 3/4-10 PLT NYLOCK803-025C29.
HHCS 3/4-10X6 1/2 GR5802-360C30.
NUT HEX 1/2-13 PLT803-020C31.
HHCS 1/2-13X2 GR5802-128C32.
VALVE STEM METAL TR-575 TUBLES814-210C33.
TIRE 16.5L-16.1 14 PLY IMPL814-366C34.
TIRE/WHL 16.5L-16.1 / 14 PLY814-368C35.
WASHER LOCK SPRING 1/2 PLT804-015C36.
PIN WLDMT 1 1/4 X 6 1/2 NR401-730H37.
HUB/SPINDL 8 BLT F/SENSOR 8000815-345C38.
HUB ASSEMBLY;8-BOLT, 8000LBS815-301C39.
HUB 8 - BOLT (Q75-8)815-299C40.
HHCS 3/4-10X5 GR5802-069C41.
NUT HEX JAM 1/2-13 PLT803-036C42.
SPINDLE 2.75 X 16.25815-344C43.
OIL SEAL CR29968816-595C44.
BEARING CONE 387-AS822-238C45.
BRG CUP 3.81D 382A822-107C46.
HUB 8/BOLT8000# MACHINEDL758401-847.
BRG CUP 2.89ODX.58WD #LM501310822-053C48.
BRG CONE 1.62IDX.78WD#LM501349822-048C49.
1 HARDENED SPINDLE WASHER148-404D50.
NUT HEX SLOTTED 1-14803-095C51.
PIN COTTER 7/32 X 2805-060C52.
GREASE CAP 3.125 X .28890-277C53.

Transport

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 55 - 401-312P

Contact Drive

(Applies to 3PYP only)

Table of Contents Part Number Index

25229

401-312P - 56 - 11/21/13

Contact Drive

(Applies to 3PYP only)

Image No.dwg25229
DRIVESHAFT 3PYP PLANTER826-502C1.
PIN ROLL 1/4 X 2 LG PL805-146C2.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C3.
SHAFT 7/8 HEX X 34.5 LG401-952D4.
803-184 FLG TP LK 5/16-18ZNYCR803-177C5.
FLANGETTE 52 3-BOLT PLT822-175C6.
BRG INS 7/8HEXX2.04OD SPH822-195C7.
RHSNB 5/16-18X1 GR5802-282C8.
HSHCS M8X1.25X30 GR8.8 PLT802-775C9.
SPKT 50A25 CLUTCH METRIC BORE808-357C10.
CLUTCH SPROCKET SPACER196-876D11.
LOCK COLLAR, 7/8 HEX W/ SET SC402-025S12.
COLLAR LOCK 7/8 HEX402-058D13.
SCREW SET 5/16-18 SKT KP X 3/8801-035C14.
BUSHING 1 1/8 ODX7/8 HEX BORE196-877D15.
KEY 1/4 X 3/16 X 3.80839-956C16.
OGURA CLUTCH823-231C17.
HHCS 1/2-13X4 1/2 GR5 SPTHD802-672C18.
WASHER FLAT 1/2 USS HARD PLT804-113C19.
IDLER SPOOL #50 2.38X1.01X.31817-456C20.
TUBE RND 1 OD X 7/32W X 3.31120-313D21.
WASHER LOCK SPRING 1/2 PLT804-015C22.
NUT HEX 1/2-13 PLT803-020C23.
CHAIN RL #50 109 PITCHES136-239D24.
SPKT 50C30 X 7/8 HEX BORE808-319C25.
SHAFT 7/8 HEX X 227 LONG401-491D26.
CLAMP WRM DRV#28 SS(1.31-2.25)800-125C27.
DRIVE SHAFT BELLOWS - LONG816-587C28.
CLAMP WRM DRV #20SS (.81-1.75)800-257C29.
SHAFT 7/8 HEX X 90.0 LG401-944D30.
WASHER MACH 1.50 X 1.00 X 18GA804-061C31.
CHAIN RL #50 105 PITCHES136-237D32.
HSHCS 5/16-18X3/4 GR8 BLK802-562C33.
SPKT 50A22 X 1 3/8 BORE411-005D34.
CHAIN RL #50 70 PITCHES136-234D35.
CLUTCH SLIP 175NM 7/8 HEX BORE823-251C36.
HHCS 1/2-13X3 1/4 GR5802-099C37.
TUBE RND 1 OD X 7/32W X 2.13120-306D38.
HHCS 1/2-13X4 1/2 GR5802-413C39.
HHCS 1/4-20X5 GR5 PLT802-085C40.
NUT-HEX 1/4-20 PLT803-006C41.
WASHER FLAT 1/4 SAE PLT804-007C42.
WASHER LOCK SPRING 1/4 PLT804-006C43.
WASHER MACH 1 3/4 X 1 X 18 GA804-082C44.
SPKT 50C28 X 7/8 HEX BORE808-312C45.
SPKT 50C23 X 7/8 HEX BORE808-307C46.
CHAIN RL #50 82 PITCHES136-236D47.
HHCS 1/2-13X5 1/2 GR5802-046C48.
TUBE RND 1 X 7/32 WL X 4411-012D49.
SHAFT 7/8 HEX 13.00411-011D50.
SHAFT 7/8 HEX, 118.0 LONG PLTD120-292D51.
SPLIT SPACER 1 ID X 1.25 THICK120-337S52.
SPKT 50C18 X 7/8 HEX BORE402-198H53.
SPKT 50C36 X 7/8 HEX BORE808-313C54.
U-BOLT 5/8 X 7 1/32 X 8 1/2806-052C55.
TRANSMISSION WELDMENT402-200H56.
WASHER FLAT 5/8 SAE PLT804-021C57.

Table of Contents Part Number Index

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 57 - 401-312P

Table of Contents Part Number Index

Contact Drive (continued)

(Applies to 3PYP only)

WASHER LOCK SPRING 5/8 PLT804-022C58.
NUT HEX 5/8-11 PLT803-021C59.
M6X1X3.5MM THD ZERK 826-501-2656000760.
EC YOKE ASSY107100161.
EC CROSS ASSEMBLY (U JOINT)100102062.
EC OUTER TUBE YOKE170102763.
EC INNER TUBE YOKE170102964.
CLUTCH OIL SHIELD402-507D65.
BUTTON PLUG 7/8 ROUND HOLE817-813C66.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 58 - 11/21/13

Table of Contents Part Number Index

Contact Drive (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Drive

11/21/13 - 59 - 401-312P

Table of Contents Part Number Index

Contact Drive Gauge Wheel

(Applies to 3PYP only)

25061

401-312P - 60 - 11/21/13

Table of Contents Part Number Index

Contact Drive Gauge Wheel

(Applies to 3PYP only)

Image No.dwg25061
3 BOLTPIVOT BEARING ASSY120-269S1.
TUBE RND 1 OD X 7/32W X 1.56120-305D2.
TUBE RND 1 OD X 7/32W X 3.31120-313D3.
SHAFT 7/8 HEX 15.00401-971D4.
SPKT 50A38 2.75 BORE401-993D5.
LONG LINK SPRING ADJUSTER402-262S6.
SLEEVE SPRING LINK MOUNT402-035D7.
PIN 1 X 4 1/2 NONROTATE402-209H8.
SPKT 50C34 X 7/8 HEX BORE402-167H9.
SPKT 50C18 X 7/8 HEX BORE402-198H10.
SPKT 50C38 X 7/8 HEX BORE402-199H11.
GUARD CHAIN GROULD DRIVE402-201H12.
GAUGE WHL GR DR MNT WLMT402-202H13.
SPINDLE GW WELDMENT402-203H14.
YOKE GA WHL WLMT GRND DRV LEFT402-204H15.
YOKE GA WHL WLMT GRND DRV RH402-205H15.
SPACER GAUGE WHL 1 3/16411-025D16.
SHAFT 7/8 HEX 16 3/8411-026D17.
GREASE ZERK STRAIGHT 1/4-28800-001C18.
HHCS 3/8-16X1 GR5802-017C19.
HHCS 3/4-10X2 1/4 GR5802-065C20.
HHCS 1/2-13X1 3/4 GR5802-082C21.
HHCS 3/8-16X2 1/2 GR5802-114C22.
HHCS 1/2-13X4 3/4 GR5802-201C23.
HHCS 1/2-13X2 3/4 GR5802-226C24.
RHSNB 5/16-18X1 GR5802-282C25.
HHCS 3/4-10X1 1/2 GR5 NYL802-438C26.
NUT HEX 1/2-13 PLT803-020C27.
NUT HEX 3/4-10 PLT803-027C28.
NUT HEX JAM 1/2-13 PLT803-036C29.
NUT HEX FLG TOP LK 5/16-18 YLW803-177C30.
NUT HEX JAM 1 1/2-12 PLT803-210C31.
WASHER FLAT 3/8 USS PLT804-011C32.
WASHER LOCK SPRING 3/8 PLT804-013C33.
WASHER LOCK SPRING 1/2 PLT804-015C34.
WASHER FLAT 1/2 USS PLT804-017C35.
WASHER LOCK SPRING 3/4 PLT804-023C36.
WASHER MACH 1.50 X 1.00 X 18GA804-061C37.
WASHER FLAT 1/2 USS HARD PLT804-113C38.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C39.
PIN LINCH 3/16 X 1 9/16 LONG805-240C40.
U-BOLT 3/4-10 X 7 1/32 X 9 3/4806-193C41.
SPKT 50C15 X 7/8 HEX BORE808-302C42.
SPKT 50C19 X 7/8 HEX BORE808-304C43.
SPKT 50C20 X 7/8 HEX BORE808-305C44.
SPKT 50C28 X 7/8 HEX BORE808-312C45.
SPKT 50C30 X 7/8 HEX BORE808-319C46.
TIRE/WHL 7.60-15 LUG LEFT814-321C47.
HUB ASSY 6BOLT 6"BC 4.62PILOT815-200C48.
IDLER SPOOL #50 2.38X1.01X1.31817-456C49.
BRG.7/8HEX BR 52MM SPHRICAL OD822-119C50.
FLANGETTE 52 3-BOLT PLT822-175C51.
SNAP RING INT 2.05 OD800-038C52.
BEARING .880 HEX BORE 205DD188-006V53.
3 BOLTPIVOT CAST W/BRG SEAT120-188D54.
BUSHING CYL 1 1/4 X 1 X 1890-005C55.
LONG ADJUSTMENT ROD WLMT402-261H56.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 61 - 401-312P

Table of Contents Part Number Index

Contact Drive Gauge Wheel (continued)

(Applies to 3PYP only)

LINK, ADJUSTMENT402-013D57.
BLOCK MOUNTING402-014D58.
NUT ACME THD 1-5803-090C59.
WASHER, HEAVY FLAT402-015D60.
WHEEL 15 DIA X 6 WIDE X 6 BOLT814-315C61.
TIRE 7.6-145 6 PLY LUG814-319C62.
VALVE STEM TR415X.625X1 1/4 LG816-035C63.
BRG CONE TIMKEN 13600LA90028822-141C64.
SPRING, COMP. 2.69X3.25X.375W402-442D65.
HHCS 1/4-20X1 1/2 GR5802-167C66.
WASHER LOCK SPRING 1/4 PLT804-006C67.
NUT HEX 1/4-20 PLT803-006C68.
BOLT WHEEL 9/16-18X1 1/8 90-D802-373C69.
CHAIN RL #50 109 PITCHES136-239D70.
CHAIN RL #50 120 PITCHES136-240D71.
SPKT 50C17 X 7/8 HEX BORE808-303C72.
SPKT 50C23 X 7/8 HEX BORE808-307C73.
SPKT 50C24 X 7/8 HEX BORE808-308C74.
SPKT 50C25 X 7/8 HEX BORE808-309C75.
SPKT 50C26 X 7/8 HEX BORE808-310C76.
SPKT 50C27 X 7/8 HEX BORE808-311C77.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 62 - 11/21/13

Table of Contents Part Number Index

Contact Drive Gauge Wheel (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Drive

11/21/13 - 63 - 401-312P

Hydraulic Drive

(Applies to 3PYP only)

Table of Contents Part Number Index

25060

401-312P - 64 - 11/21/13

Hydraulic Drive

(Applies to 3PYP only)

Image No.dwg25060
SHAFT 7/8 HEX, 118.0 LONG PLTD120-292D1.
U-BOLT 5/8 X 7 1/32 X 8 1/2806-052C2.
WASHER LOCK SPRING 5/8 PLT804-022C3.
NUT HEX 5/8-11 PLT803-021C4.
LOCK COLLAR, 7/8 HEX W/ SET SC402-025S5.
SPKT 50C30 X 7/8 HEX BORE808-319C6.
NUT HEX 1/2-13 PLT803-020C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
WASHER FLAT 1/2 USS HARD PLT804-113C9.
TUBE RND 1 OD X 7/32W X 3.31120-313D10.
IDLER SPOOL #50 2.38X1.01X.31817-456C11.
HHCS 1/2-13X4 1/2 GR5 SPTHD802-672C12.
RHSNB 5/16-18X1 GR5802-282C13.
FLANGETTE 52 3-BOLT PLT822-175C14.
BRG INS 7/8HEXX2.04OD SPH822-195C15.
803-184 FLG TP LK 5/16-18ZNYCR803-177C16.
BRG/SEED TUBE SUPPORT WLMT401-277H17.
SHAFT 7/8 HEX 38 LG401-991D18.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C19.
DRIVESHAFT 3PYP PLANTER826-502C20.
CLAMP WRM DRV #20SS (.81-1.75)800-257C21.
DRIVE SHAFT BELLOWS - LONG816-587C22.
CLAMP WRM DRV#28 SS(1.31-2.25)800-125C23.
SHAFT 7/8 HEX, 113 LG PLT401-989D24.
BRKT ROW UNIT DRV SFT WLDMNT401-288H25.
SHAFT 7/8 HEX 16.75 LG401-953D26.
PIN ROLL 1/4 X 2 LG PL805-146C27.
SCREW SET 5/16-18 SKT KP X 3/8801-035C28.
COLLAR LOCK 7/8 HEX402-058D29.
NUT HEX 5/16-18 PLT803-008C30.
WASHER FLAT 5/16 SAE PLT804-036C31.
HSHCS M8X1.25X30 GR8.8 PLT802-775C32.
SPKT 50A25 CLUTCH METRIC BORE808-357C33.
CLUTCH SPROCKET SPACER196-876D34.
BUSHING 1 1/8 ODX7/8 HEX BORE196-877D35.
KEY 1/4 X 3/16 X 3.80839-956C36.
OGURA CLUTCH823-231C37.
HHCS 5/16-18X6 GR5802-316C38.
SPKT 50B17 X 1 BORE W/KW, 2 SS808-344C39.

N/A40.

HHCS 5/8-11X2 1/2 GR5802-058C41.
WASHER LOCK SPRING 5/8 PLT804-022C42.
NUT HEX 5/8-11 PLT803-021C43.
SHAFT 7/8 HEX 26 1/2 LG401-992D44.
SPKT 50C23 X 7/8 HEX BORE808-307C45.
CHAIN RL #50 63 PITCHES136-233D46.
CHAIN RL #50 78 PITCHES136-235D47.
CHAIN RL #50 109 PITCHES136-239D48.
CHAIN RL #50 105 PITCHES136-237D49.
AD 7/8M HEX X 1 1/4 RD DJ411-301D50.
AR SENSOR MOUNTING HARDWARE11004030551.
APPLICATION RATE SENSOR464360176S152.
M6X1X3.5MM THD ZERK 826-501-2656000753.
EC YOKE ASSY107100154.
EC CROSS ASSY (LONG LIFE)100101055.
EC OUTER TUBE YOKE170102756.

Table of Contents Part Number Index

Refer to page "Hydraulic Drive

Components" for breakdown

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 65 - 401-312P

Table of Contents Part Number Index

Hydraulic Drive (continued)

(Applies to 3PYP only)

EC INNER TUBE YOKE170102957.
CLUTCH OIL SHIELD402-507D58.
BUTTON PLUG 7/8 ROUND HOLE817-813C59.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 66 - 11/21/13

Table of Contents Part Number Index

Hydraulic Drive (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Drive

11/21/13 - 67 - 401-312P

Table of Contents Part Number Index

Hydraulic Drive Components

(Applies to 3PYP only)

25120

401-312P - 68 - 11/21/13

Table of Contents Part Number Index

Hydraulic Drive Components

(Applies to 3PYP only)

Image No.dwg25120
FILTER ASM 5000PSI 6MI CANNIST810-657C1.
FILTER ELEMENT 6MI PALL810-658C2.
VERIS HYD HS 8M3K-8FJX90S-8FJXVER-25843.
AD 3/4MJIC 1 1/16MORB811-205C4.
VERIS BLTFLG SER8.8M8-1.25X16VER-185485.
803-184 FLG TP LK 5/16-18ZNYCR803-177C6.
NUT HEX WHIZ 1/2-13803-037C7.
HFSS 1/2-13X1 1/2 GR5802-203C8.
VERIS FTG HYD 8MB-8MJ90VER-51849.
AD 3/4MJIC 7/8MORB811-192C10.
VALVE INLINE CHECK W/ ORIFICE810-696C11.
AD 3/4FORB 7/8MORB811-564C12.
MOTOR8.8 CU IN FC6 MNT KEYED810-603C13.
VERIS HYD LINE STL .5 OD X.049VER-521114.
HH1/2R2 180 3/4FJIC 3/4MORB841-198C15.
VERIS SOLENOID CABLEVER-1837516.
VERIS VLVBODY SAE-12-2X SAE-8VER-1980017.
VERIS COIL 12V WATERMAN CARTRVER-1979918.
VERIS PROPORTIONAL CARTR 14GPMVER-1979819.
MOTORMOUNT 40' WELDMENT402-306H20.
CONTROLLER MOUNT 40' WELDMENT402-307H21.
HFSS 5/16-18 X 3/4 GR5802-642C22.
RHSNB 5/16-18X1 GR5802-282C23.
NUT HEX 5/16-18 PLT803-008C24.
EL 3/4FJIC 3/4MJIC811-150C25.
SPKT 50B17 X 1 BORE W/KW, 2 SS808-344C26.
VERIS KEY WOODRUFFVER-2031727.
WALKBOARDLADDER PIVOTBUSHING119-278D28.
AD 3/4MORB 3/4MJIC811-088C29.
CP 3/4FORB MALE QD POPPET TYPE811-394C30.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 69 - 401-312P

Table of Contents Part Number Index

Non Drive Contact Gauge Wheel

(Applies to 3PYP only)

25208

401-312P - 70 - 11/21/13

Table of Contents Part Number Index

Non Drive Contact Gauge Wheel

(Applies to 3PYP only)

Image No.dwg25208
U-BOLT 3/4-10 X 7 X 8 1/2806-050C1.
BRACKET GAUGE WHL MNT WLDMT401-366H2.
WASHER LOCK SPRING 3/4 PLT804-023C3.
NUT HEX 3/4-10 PLT803-027C4.
3 BOLTPIVOT CAST MACHINED120-223D5.
HHCS 1/2-13X1 3/4 GR5802-082C6.
WASHER LOCK SPRING 1/2 PLT804-015C7.
NUT HEX 1/2-13 PLT803-020C8.
SLEEVE SPRING LINK MOUNT402-035D9.
HHCS 3/4-10X1 1/2 GR5 NYL PLT802-438C10.
LONG LINK SPRING ADJUSTER402-262S11.

HHCS 1/4-20X1 1/2 GR5802-167C13.
PIN 1 X 4 1/2 NONROTATE402-209H14.
WASHER LOCK SPRING 1/4 PLT804-006C15.
NUT-HEX 1/4-20 PLT803-006C16.
HHCS 3/4-10X2 1/4 GR5802-065C17.
NUT HEX JAM 1 1/2-12 PLT803-210C18.
BRG CONE 1.50ID 13600LA90028822-141C19.
HUB ASSY 6BOLT 6'"BC 4.62PILOT815-200C20.
BOLT WHEEL 9/16-18X1 1/8 90-D802-373C21.
SPINDLE GW WELDMENT402-203H22.
NUT ACME THD 1-5803-090C23.
WASHER, HEAVY FLAT402-015D24.
BLOCK MOUNTING402-014D25.
SPRING, COMP. 2.69X3.25X.375W402-442D26.
LINK, ADJUSTMENT402-013D27.
LONG ADJUSTMENT ROD WLMT402-261H28.
GREASE ZERK STRAIGHT 1/4-28800-001C29.
BUSHING CYL 1 1/4 X 1 X 1890-005C30.
VALVE STEM TR415X.625X1 1/4 LG816-035C31.
WHEEL 15 DIA X 6 WIDE X 6 BOLT814-315C32.
RPBY 814-011C814-026C33.
TIRE/WHL 9.5LX15 6IN 6BOLT814-322C34.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

Left Hand (Shown)YOKE GA WHL WLMT GRND DRV LEFT402-204H12.

Right HandYOKE GA WHL WLMT GRND DRV RH402-205H12.

11/21/13 - 71 - 401-312P

Transmission Drive

(Applies to 3PYP only)

Table of Contents Part Number Index

25073

401-312P - 72 - 11/21/13

Transmission Drive

(Applies to 3PYP only)

Image No.dwg25073
TUBE RND 1 OD X 7/32W X 2.13120-306D1.
TUBE RND 1 OD X 7/32W X 3.31120-313D2.
SPLIT SPACER 1 ID X 1.25 THICK120-337S3.
CLUTCH SPROCKET SPACER196-876D4.
BUSHING 1 1/8 ODX7/8 HEX BORE196-877D5.
LOCK COLLAR, 7/8 HEX W/ SET SC402-025S6.
SPKT 50C18 X 7/8 HEX BORE402-198H7.
TRANSMISSION WELDMENT402-200H8.
SPKT 50A22 X 1 3/8 BORE411-005D9.
SHAFT 7/8 HEX 13.00411-011D10.
TUBE RND 1 OD X 7/32WL X 2.25407-170D11.
BUTTON PLUG 7/8 ROUND HOLE817-813C12.
HHCS 1/4-20X5 GR5 PLT802-085C13.
HHCS 1/2-13X3 1/4 GR5802-099C14.
RHSNB 5/16-18X1 GR5802-282C15.
HHCS 1/2-13X4 1/2 GR5802-413C16.
HSHCS 5/16-18X3/4 GR8 BLK802-562C17.
HSHCS M8X1.25X30 GR8.8 PLT802-775C18.
NUT-HEX 1/4-20 PLT803-006C19.
NUT HEX 1/2-13 PLT803-020C20.
NUT HEX 5/8-11 PLT803-021C21.
803-184 FLG TP LK 5/16-18ZNYCR803-177C22.
WASHER LOCK SPRING 1/4 PLT804-006C23.
WASHER FLAT 1/4 SAE PLT804-007C24.
WASHER LOCK SPRING 1/2 PLT804-015C25.
WASHER FLAT 5/8 SAE PLT804-021C26.
WASHER LOCK SPRING 5/8 PLT804-022C27.
WASHER MACH 1.50 X 1.00 X 18GA804-061C28.
PIN LINCH 3/16 X 1 9/16 LONG805-240C29.
WASHER FLAT 1/2 USS HARD PLT804-113C30.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C31.
U-BOLT 5/8 X 7 1/32 X 8 1/2806-052C32.
SPKT 50C23 X 7/8 HEX BORE808-307C33.
SPKT 50C28 X 7/8 HEX BORE808-312C34.
SPKT 50C36 X 7/8 HEX BORE808-313C35.
SPKT 50A25 CLUTCH METRIC BORE808-357C36.
IDLER SPOOL #50 2.38X1.01X.31817-456C37.
BRG 7/8HEXX2.05OD SPH822-119C38.
FLANGETTE 52 3-BOLT PLT822-175C39.
OGURA CLUTCH823-231C40.
CLUTCH SLIP 175NM 7/8 HEX BORE823-251C41.
KEY 1/4 X 3/16 X 3.80839-956C42.
CHAIN RL #50 82 PITCHES136-236D43.
CHAIN RL #50 70 PITCHES136-234D44.
CHAIN RL #50 105 PITCHES136-237D45.
HHCS M8X1.25X14 GR8.8802-782C46.
NUT HEX NYLOCK M8X1.25 PLT803-278C47.
CLUTCH OIL SHIELD402-507D48.

Table of Contents Part Number Index

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 73 - 401-312P

Table of Contents Part Number Index

Tru-Count Clutch Assembly

(Applies to 3PYP only)

29815

401-312P - 74 - 11/21/13

Table of Contents Part Number Index

Tru-Count Clutch Assembly

(Applies to 3PYP only)

Image No.dwg29815
TRU-COUNT 75713-00 VALVE ASM829-140C1.
EXTENSION HARNESS 40' 6 PIN WP823-337C2.
EXTENSION HARNESS 25' 6 PIN WP823-336C2.
DJIA OUTPUT HARN 8-CH TRU-COUN4679835053.
CP 1/4 PUSH LOK POLY830-383C4.
HHCS 1/4-20X1 1/4 GR5802-224C5.
WASHER LOCK SPRING 1/4 PLT804-006C6.
NUT HEX 1/4-20 PLT803-006C7.
U-BOLT 3/8-16 X 7 1/32 X 7 7/8806-073C8.
NUT FLANGE LOCK 3/8-16 PLT803-209C9.
TRU-COUNT VALVE MODULE BRACKET402-533D10.
PLNTR CNTRL OUTPUT MODULE(POM)467982000S111.
TE POLY 1/4 PUSH LOCK830-405C12.
TUBE NYLON 1/4OD X 062WL990-109R13.
SPKT 41C12 W/SS SPCL PLT808-395C14.
PEER 7/8 HEX BRG AND MNT822-239C15.

NUT HEX 3/8-16 PLT803-014C17.
WASHER LOCK SPRING 3/8 PLT804-013C18.
HHCS 3/8-16X1 GR5802-017C19.

HHCS 1/4-20X2 1/2 GR5802-097C21.
TRU-COUNT HUB402-525D22.
SNAP RING EXT BASIC 1 3/16800-004C23.
RUBBER FLG BUSH .189ID.36OD816-648C24.
WASHER FLAT #10 SAE PLT804-046C25.
HSHCS #10-32X1802-901C26.
KEY .250X.125X1.00 RECT402-534D27.

SPKT 41B12 SPCL808-415C29.
FLG BSHG 30MMX32MMX12MM817-852C30.
ADAPTER 7/8 HEX 1 1/4 RND BORE402-524D31.
HHCS 3/8-16X1 3/4 GR5802-023C32.
SPACER PLATE FRT BEARING402-527D33.
SPACER SHIM FRT BRG TRU COUNT402-541D34.
TRU-COUNT AIR TANK MOUNT PLATE402-535D35.
HHCS 3/8-16X3/4 GR5802-014C36.
TRU-COUNT COMPRESSOR ASSEMBLY823-330C37.
TRU-COUNT TR REVERSE SPKT TUBE402-280H38.
TRU-COUNT LH AIR CLUTCH823-328C39.
HHCS 1/4-20X1 GR5802-005C40.
SUPT BRACKET HEX BRG402-538D41.
HHCS 3/8-16X1 1/2 GR5802-022C42.
WASHER FLAT 3/8 SAE PLT804-012C43.
STEP BUSHING FOR OPENER BRG402-539D44.

TRU-COUNT AIR TANK ASM823-329C52.
LOCK COLLAR, 7/8 HEX W/ SET SC402-025S53.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

RH Bracket (Shown)OFFSET BRG BRACKET402-523D16.

LH BracketOFFSET BRG BRACKET LH402-532D16.

RH clutchTRUE COUNT RH AIR CLUTCH823-327C20.

NO 3PYPTRU-COUNT 15 IN SPKT TUBE402-272H28.

YP40 & YP24TRU-COUNT 15 IN LH SPKT TUBE402-274H28.

ALLTRU-COUNT TR SPKT TUBE REP402-278H28.

Used on single row assemblyHHCS 1/4-20X1 1/2 GR5802-167C45.

Used on single row assemblyADAPTER TC CLUTCH 41A12 SPKT402-529D46.

Used on single row assemblyHSHCS #10-32X5/8802-575C47.

Used on single row assemblyTRU-COUNT SPKT RETAINER RING402-530D48.

Used on single row assemblySPKT 41A12 3HOLE TC402-630D49.

Used on single row assemblyWASHER LOCK INTERNAL #10 SS804-032C50.

Used on single row assemblyHSHCS #10-32X7/8802-904C51.

11/21/13 - 75 - 401-312P

Table of Contents Part Number Index

Tru-Count Clutch Assembly (continued)

(Applies to 3PYP only)

HHCS 1/4-20X3/4 GR5802-004C54.
WASHER FLAT 1/4 SAE PLT804-007C55.
WASHER LOCK #10804-054C56.
68935 TRU CNT FIT.1/4MNPTX1/4823-368C57.
68932 TRU CNT HOSE FOR COMPRES823-367C58.
69045 TRU CNT MAN CMP 350/450C823-370C59.
69151 TRU COUNT MINI BALL VALV823-365C60.
69002-10S (10PK)TRU CNT TB FIT823-375C61.
77621 TRU CNT SWTCH 85-105PSI823-374C62.
68892 TRU CNT BRSS TNK DRN 1/4823-372C63.
72376-00 TRU CNT VALV ENCLOSUR823-366C64.
73814 TRU CNT STRN RELIEF LIQ823-373C65.
68842 TRU COUNT AIR VALVE SING823-371C66.
SPACER EXTENDED SNGL CLUTCH TC402-591D67.
HHCS 1/4-20X2 GR5802-152C68.
TRU-COUNT SHORT ROW SINGLE ASM402-329K69.

RevisionCommentsPart DescriptionPart No.Ref.

Only used on YP30. Includes items:

7, 20, 23, 26, 47-49, 56, & 67-68

401-312P - 76 - 11/21/13

Table of Contents Part Number Index

Tru-Count Clutch Assembly (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Drive

11/21/13 - 77 - 401-312P

Table of Contents Part Number Index

12FP Corn Meter (890-856C) 12FP Sunflower Meter (890-912C)

(Applies to 3PYP only)

21992

401-312P - 78 - 11/21/13

Table of Contents Part Number Index

12FP Corn Meter (890-856C) 12FP Sunflower Meter (890-912C)

(Applies to 3PYP only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg21992
NUT HEX WHIZ 1/4-20 PLT803-194C1.
PIN COTTER 5/32 X 1 1/2 LONG805-089C2.
HHCS 1/4-20X1/2 GR2802-283C3.
PIN ROLL 3/16X 1 1/2 PLT805-024C4.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C5.
HHCS 1/4-20X1 1/2 GR2802-221C6.
METER NUT COVER3430217.
5/8 METER NUT31114H10418.

Corn onlyFINGER ASSEMBLY 12 FINGER3430299.

Corn onlyMETER STICKER900M0810.

Corn onlyPOP MAX II BACK PLATE A INSERT34210311.

Sunflower onlySUNFLOWER POPMAX PLATE ASSBY34211111.
INSERT A34211012.

B INSERT FOR POPMAX II34210712.

C INSERT FOR POPMAX II34210812.

8-32 X 5/16 PAN HEAD SCREW3112886413.
SCREW .19 X 5/831121H129514.

FINGER PICKUP BRUSH SCREW34303216.

PRECISION BRG W/HOUSING34301118.
BELT HOUSING34300219.
BUSHING34300620.
ROLLER IDLER34300121.
DRIVE WHEEL PREC. PLANTING34306222.

METER COVER34300524.

2007 SKIP STOP PAD34307326.
HHCS 1/4-20X1 GR5802-005C27.
HDWE FOR(4)2007 SKIP STOP PADS34309228.

DECAL 12 FINGER CORN848-118C30.

(Option) See your GP dealer for

application. (Standard insert for Corn)

(Option) See your GP dealer for

application.

(Option) See your GP dealer for

application. (Standard insert for
sunflower)

Corn onlyADJ BRUSH KIT34305215.

Sunflower onlyBLANK BRUSH34309115.

Sunflower onlyFINGER ASSEMBLY12 FINGER34306717.

Must be oriented as shownSURE FIRE BELT34306623.

Corn onlyPRECISION E CLIP34308925.

Corn onlyREPLACED BY PRE16001134306029.

Meter

11/21/13 - 79 - 401-312P

Table of Contents Part Number Index

25 Series Corn Meter (6FP 403-169K) (12FP 403-158K) (12 FP Sunflower 403-203K)

(Applies to 3PYP only)

22709

401-312P - 80 - 11/21/13

Table of Contents Part Number Index

25 Series Corn Meter (6FP 403-169K) (12FP 403-158K) (12 FP Sunflower

403-203K)

Meter

(Applies to 3PYP only)

Image No.dwg22709
25BF FINGER PICKUP BACKING PLT403-233D1.
HHCS 1/4-20X3/4 GR5802-004C2.
NUT HEX WHIZ 1/4-20 PLT803-194C3.
WASHER FLAT 1/4 SAE PLT804-007C4.
PRECISION PL 6FP CORN METER890-857C5.

PRECISION PL 12FP CORN METER890-856C5.

PREC PL 12FP SUNFLOWER METER890-912C5.

OVER CENTER LATCH800-137C6.
HFSS 1/4-20X5/8 GR5802-196C7.
NUT HEX LOCK 1/4-20 FLG803-088C8.
FINGER PICKUP METER DUST FLAP817-565C9.
25S BULK FILL COVER SUB ASY403-157S10.
SCREW HI-LOW #10 X .63 HEX HD801-195C11.
HFSS 1/4-20X3/4 GR5802-257C12.
CLEANOUT SPRING BUSHING403-150D13.
RIVET POP 3/16 .062-.251 LF800-220C14.
METER CLEANOUT COVER SPRING403-149D15.
CORN METER CLEANOUT COVER817-607C16.
WASHER FENDER 3/16 X 3/4804-206C17.
RIVET POP 3/16 .251-.375 LF800-230C18.
OB RPBY 403-157S817-612C19.

RevisionCommentsPart DescriptionPart No.Ref.

Refer to page (6FP Corn Meter

(890-857C) for breakdown

Refer to page (12FP Corn Meter

(890-856C) 12FP Sunflower Meter
(890-912C) for breakdown

Refer to page (12FP Corn Meter

(890-856C) 12FP Sunflower Meter
(890-912C) for breakdown

11/21/13 - 81 - 401-312P

Table of Contents Part Number Index

25 Series Singulating Meter (403-156K)

(Applies to 3PYP only)

22744

401-312P - 82 - 11/21/13

Table of Contents Part Number Index

25 Series Singulating Meter (403-156K)

(Applies to 3PYP only)

Image No.dwg22744
METER CLEANOUT COVER SPRING403-149D1.
CLEANOUT SPRING BUSHING403-150D2.
SINGULATOR COVER SCREEN FORMED403-152D3.
25BF SINGULATOR METER COVER403-232D4.
RIVET POP 3/16 .062-.251 LF800-220C5.
RIVET POP 3/16 .251-.375800-227C6.
SCREW HEX SLT10-16X1/2P.THD CT801-002C7.
SCREW HEX SLT 10-16X3/4PTHD CT801-172C8.
PIN CLEVIS 1/4X1 31/64 USBL805-296C9.
PIN CLEVIS 1/4 X 2 ADJUSTABLE805-298C10.
PIN COTTER 3/32 X 1/2805-307C11.
PRECISION METER DUST FLAP817-564C12.
METER CLEANOUT COVER817-568C13.
25BF PRECISION VENT COVER817-569C14.
WASHER FLAT 1/4 SAE PLT804-007C15.
25S BF SINGULATR METER BACK PL403-154D16.
OVER CENTER LATCH800-137C17.
HFSS 1/4-20X3/4 GR5802-257C18.
NUT-HEX 1/4-20 PLT803-006C19.
WASHER LOCK SPRING 1/4 PLT804-006C20.
SPRING COMP .39ODX.75LGX.047W807-186C21.
SPRING COMP .39ODX.69LX.043WSS807-194C22.
METER SEED CUTOFF SLIDE817-405C23.
PSS METER HUB403-056D24.
PSS METER WHEEL SUPPORT PLATE403-058D25.
PSS METER Q/C DRIVE SHAFT403-117D26.
METER WHEEL SCRAPER403-153D27.
CRPH TAPPING SCREW #6 X 3/8801-106C28.
HHCS 5/16-18X1 GR5802-159C29.
NUT HEX 5/16-18 PLT803-008C30.
NUT HEX THIN 5/8-18 X 3/16 PLT803-345C31.
WASHER LOCK SPRING 5/16 PLT804-009C32.
WASHER MACH 1.00 X .625 X 14GA804-111C33.
PIN ROLL 1/8 X 1LG. PLT.805-080C34.
PIN ROLL 1/4 X 2 LG PL805-146C35.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C36.
SPRING COMP 1.46ODX1.5X.112W807-187C37.
KNOB817-425C38.
BRG .63ID PRESS WHL ASY822-170C39.
CORN RND 1400-1900 28CELL-GRN403-127D40.
CORN RND 1700-2200 28CELL-GRN403-128D40.
CORN RND 1400-1700 42CELL-GRN403-129D40.
CORN RND 1700-2000 42CELL-GRN403-130D40.
CORN FLT1500-1675 28CELL-GRN403-131D40.
CORN FLT1625-1800 28CELL-GRN403-132D40.
COTTONWHEEL 4000-4600-GRN403-133D40.
COTTONWHEEL 4600-5200-GRN403-134D40.
COTTONWHEEL 5200-6000-GRN403-135D40.
MILO WHEEL 51 CELL-GRN403-136D40.
MILO WHEEL 102 CELL-GRN403-137D40.
MILO WHEEL 135 CELL-GRN403-138D40.
MILO WHEEL 270 CELL-GRN403-139D40.
MILO WHEEL 135 CELL-GRN403-140D40.
MILO WHEEL 270 CELL-GRN403-141D40.
SOYBEANWHEEL 1700-2200-GRN403-122D40.
SOYBEANWHEEL 2200-2700-GRN403-123D40.
SOYBEANWHEEL 2700-3200-GRN403-124D40.

Meter

RevisionCommentsPart DescriptionPart No.Ref.

11/21/13 - 83 - 401-312P

Table of Contents Part Number Index

25 Series Singulating Meter (403-156K) (continued)

(Applies to 3PYP only)

SOYBEANWHEEL 3100-3800-GRN403-125D40.
SOYBEANWHEEL 3600-4000-GRN403-126D40.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 84 - 11/21/13

Table of Contents Part Number Index

25 Series Singulating Meter (403-156K) (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Meter

11/21/13 - 85 - 401-312P

Table of Contents Part Number Index

6FP Corn Meter (890-857C)

(Applies to 3PYP only)

21991

401-312P - 86 - 11/21/13

Table of Contents Part Number Index

6FP Corn Meter (890-857C)

(Applies to 3PYP only)

Image No.dwg21991
NUT HEX WHIZ 1/4-20 PLT803-194C1.
PIN COTTER 5/32 X 1 1/2 LONG805-089C2.
HHCS 1/4-20X1/2 GR2802-283C3.
PIN ROLL 3/16X 1 1/2 PLT805-024C4.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C5.
HHCS 1/4-20X1 1/2 GR2802-221C6.
METER NUT COVER3430217.
5/8 METER NUT31114H10418.
FINGER ASSEMBLY 6 FINGER CORN3430539.
STICKER900MO810.
POP MAX II BACK PLATE A INSERT34210311.
INSERT A34211012.

B INSERT FOR POPMAX II34210712.

C INSERT FOR POPMAX II34210812.

8-32 X 5/16 PAN HEAD SCREW3112886413.
SCREW .19 X 5/831121H129514.
ADJ BRUSH KIT34305215.
FINGER PICKUP BRUSH SCREW34303216.
PRECISION E CLIP34308917.
PRECISION BRG W/HOUSING34301118.
BELT HOUSING34300219.
BUSHING34300620.
ROLLER IDLER34300121.
DRIVE WHEEL PREC. PLANTING34306222.

METER COVER34300524.
REPLACED BY PRE16001134306025.
2007 SKIP STOP PAD34307326.
HHCS 1/4-20X1 GR5802-005C27.
HDWE FOR(4)2007 SKIP STOP PADS34309228.
DECAL 6 FINGER CORN848-119C29.

Meter

RevisionCommentsPart DescriptionPart No.Ref.

(Option) See your GP dealer for

application. (Standard insert for Corn)

(Option) See your GP dealer for

application.

(Option) See your GP dealer for

application. (Standard insert for
sunflower)

Must be oriented as shownSUREFIRE SEED BELT34306623.

11/21/13 - 87 - 401-312P

Table of Contents Part Number Index

25 Series Opener Arms & Mounts

(Applies to 3PYP only)

21854

401-312P - 88 - 11/21/13

Table of Contents Part Number Index

25 Series Opener Arms & Mounts

(Applies to 3PYP only)

Image No.dwg21854
25 SERIES OPENER SHANK WELDMT298-509H1.
HHCS 3/8-16X2 1/2 GR5802-114C2.
HFS 1/2-13X6 1/8GR5 PLT802-745C3.
IDLER SPOOL 1.44OD X.53B X1.5L817-480C4.
IDLER SPACER TUBE 1/2OD X 1.56198-257D5.
NUT FLANGE LOCK 3/8-16 PLT803-209C6.

NUT HEX FLG. LOCK 1/2-13 PLT.803-169C8.
25P UPPER SPRING LINK198-292D9.

SPRING EXT 1.575O.D.X.225 WIRE807-076C11.
25P LOWER SPRING LINK198-293D12.
25P REAR OPENER INNER PIVOT TB198-295D13.

HHCS 3/8-16X1 GR5802-017C16.
RPBY 298-883S298-514H17.

U-BOLT 5/8 X 7 1/32 X 8 1/2806-052C18.
NUT HEX 5/8-11 PLT803-021C19.
DRIVE MOUNT WELDMENT403-113H20.
DRIVE PLATE LINE-UP PIN403-107D21.

RHSNB 3/8-16X1 GR5802-015C23.
HHCS 3/8-16X2 1/4 GR5802-382C24.
NUT HEX 3/8-16 PLT803-014C25.
WASHER LOCK SPRING 3/8 PLT804-013C26.
SPRING COMP DIE.75X.375X1LX515807-232C27.
SCR HX SKT BUT CP 3/8-16X3/4801-078C28.
9/16 OD DRIVE PLATE SPACER TB403-182D29.
PRESS WHEEL ARM PIVOT BUSHING817-083C30.
IDLER BRACKET WELDMENT403-115H31.
IDLER PIVOT 2.06 LONG891-191C32.
IDLER 1 PC 2.38X1.01X1.062817-406C33.
SNAP RING EXT 1 HEAVY800-085C34.
WASHER FLAT 3/8 SAE PLT804-012C35.
WASHER GRASS SEEDER CUP SHAFT804-042C36.
METER ALIGNMENT BUSHING403-108D37.
METER RETAINER LATCHPLATE403-112D38.
METER RETAINER PLATE403-111D39.
SPRING EXT. 1.0ODX5.OLX.095MW807-236C40.
25P MIDDLE OPENER MOUNT W/BUSH298-888S41.

25P REAR OPENER MOUNT W/BUSH298-887S42.

WASHER LOCK SPRING 5/8 PLT804-022C44.
DRIVE JAW403-104D45.
19T SPROCKET HUB ASSY403-112H46.

Opener

RevisionCommentsPart DescriptionPart No.Ref.

Twin row onlyTWIN ROW SPACER BRACKET UPPER198-335D7.

(S/N A1055S-)25 SERIES UPPER PARALLEL ARM298-513H10.

(S/N A1056S+)25 SERIES UPPER PARALLELARM288-374H10.

(S/N A1055S-)25 SERIES LOWER PARALLEL ARM298-510H14.

(S/N A1056S+)25 SRS LOWER PARALLEL ARM403-667D14.

2008-SPKT 41B12 7/8 HEX W/BEARING403-059D15.

2009+PEER 7/8 HEX BRG AND MNT822-239C15.

Used on front stagger 15" & 20" rows

1st Reveision

2nd Revision25P FRONT OPENER MOUNT W/BUSH298-883S17.

Includes items 45 - 51DRIVE BEARING ASSEMBLY403-117S22.

Used on rear stagger rows on 20"

spacing also used on all 30" rows on

30" only spacing (S/N A1024S-)
Used on middle rows on 15" spacing25P CENTER MIDDLE OPENER MOUNT298-626H41.
Used on rear stagger rows on twinrow

spacing & 15" (S/N A1025S+)
Front rowCHAIN RL #41 90 PITCHES136-214D43.
Middle row 7" staggerCHAIN RL #41 116 PITCHES136-215D43.
Rear row 14" staggerCHAIN RL #41 144 PITCHES136-216D43.

11/21/13 - 89 - 401-312P

Table of Contents Part Number Index

25 Series Opener Arms & Mounts (continued)

(Applies to 3PYP only)

DRIVE BEARING HOUSING403-116H47.
SNAP RING EXT 45MM800-365C48.
PIN ROLL 1/4 X 2 1/2 PLT805-117C49.
SPRING COMP .970ODX.063WX1.25807-174C50.
BRG BALL 45IDX7ODX16W822-210C51.
PIN HITCH 5/8 X 5 3/4 USABLE805-435C52.
PARALLEL ARM PIVOT BUSHING817-084C53.

Twin row onlyTWIN ROW SPACER BRACKET LOWER198-334D54.
2009+SPKT 41C12 W/SS SPCL PLT808-395C55.

WASHER FLAT 5/8 USS PLT804-019C56.

RevisionCommentsPart DescriptionPart No.Ref.

401-312P - 90 - 11/21/13

Table of Contents Part Number Index

25 Series Opener Arms & Mounts (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Opener

11/21/13 - 91 - 401-312P

Table of Contents Part Number Index

25 Series Opener Body

(Applies to 3PYP only)

21853

401-312P - 92 - 11/21/13

Table of Contents Part Number Index

25 Series Opener Body

(Applies to 3PYP only)

Image No.dwg21853
SCRAPER, DISC LH404-153D1.
NUT HEX WHIZ 5/16-18 PLT803-043C2.
RHSNB 5/16-18X3/4 GR5802-092C3.
1/2-13X 1 3/4 SQ HD SS G5 PLTD801-164C4.
SEED TUBE FPU TB,CLIP & SENSOR403-214S5.
25P SCRAPER SEP WLDMT 3/8 FRT404-796H6.
PIN ROLL 5/16 X 5/8 PLT805-335C7.
PIN ROLL 5/16 X 7/8805-250C8.
WALKBEAM404-077D9.
DISK SHIELD404-198D10.
WALKBEAM PIVOT PIN404-079D11.

GREASE ZERK STRAIGHT 1/4-28800-001C14.
HHCS 1/2-13X3 GR5802-039C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
U CUP SEAL816-686C18.

HHCS 5/16-18X2 1/2 GR5802-172C21.
RHSNB 5/16-18X3/4 GR5802-092C21.
HFS 1/2-13 X 1 1/2 GR8 NYL PLT802-663C22.

2.5X16 SIDE DEPTH WHEEL ASSY814-257C23.

3X16 SIDE DEPTH WHEEL ASSY814-260C23.

4 X 16 GAUGE TIRE ASSY-PLASTIC814-173C23.

WASHER MACH 1.19 X .63 X 18GA804-040C25.
WASHER LOCK SPRING 5/8 PLT804-022C26.

WALKBEAM MOUNT404-078D28.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C29.
DD BRG FLANGE DUST COVER107-111D30.

HHCS 1/2-13X1 GR5802-258C32.
SEED TUBE 25S FPU TB&CAP W/ HL817-715C33.
HHCS 1/2-13X1 1/2 GR5802-091C34.
1X12 PW ADJUSTER405-032D35.

SNAP RING EXT 5/8 .050 T800-118C37.
20 SER OPNR CAM PIN198-202D38.
PLANTER HANDLE404-020D39.
SPRING COMP .72 X 1.5 X .072WD807-119C40.
WASHER 3/4 X 17/32 X 18 GA PLT804-100C41.
PIN COTTER 3/32 X 1 LONG805-063C42.
ADJUSTMENT ASSY404-014S43.

PIN ROLL 1/4 X 1 1/2 LG PLT805-180C44.

Opener

RevisionCommentsPart DescriptionPart No.Ref.

Used on wide 20" & 30" rowsSPINDLE, GA WHL MNT ADJ404-119D12.
Shown, Used on narrow,twinrow, 15"25P SIDE DEPTH WHL ARM SPINDLE198-288D12.
Shown, Used on, twinrow,15"25P SIDE DEPTH WHEEL ARM198-289D13.
Used on, 20" & 30" rowsARM, GAUGE WHEEL404-155D13.

Shown, Used on twinrow,15"OUTER BUSHING INNER CUP SEAL I198-360D19.
Used on 20" & 30" rows25P O-RING BUSHING404-214D19.
Shown, Used on twinrow,15"25P DEPTH WHL ECCENTRIC BUSHNG198-290D20.
Used on 20" & 30" rowsECCENTRIC BUSHING404-174D20.

Referto "SideDepth Wheel Assembly"

for breakdown
Referto "SideDepth Wheel Assembly"

for breakdown
Referto "SideDepth Wheel Assembly"

for breakdown
Used on twinrow onlyHHCS 5/8-11X3 1/4 GR5802-160C24.
Used on 15", 20" & 30" rowsHHCS 5/8-11 X 3 GR8802-646C24.

Used on twinrow onlyWASHER FLAT 1.31ODX.65IDX.188T804-195C27.

Includes items 50 - 534.0 MM 15 DISC W/ 5/8 ASSY404-121S31.

S/N A1056S+LONG PQ MOUNT199-140H36.
S/N A1055S-RPBY 199-146A199-108H36.

Includes items 9, 11, 28, 39 - 42, 44

& 45

11/21/13 - 93 - 401-312P

Table of Contents Part Number Index

25 Series Opener Body (continued)

(Applies to 3PYP only)

PIN ROLL 5/32 X 1 1/2 PLT805-290C45.
SCRAPER, DISC RH404-152D46.
CABLE TIE .19X7.25 1.75D 50LB800-112C47.
PIN CLEVIS 1/4 X 2 1/2 PLT805-278C48.
PIN COTTER 3/32 X 1 LONG805-063C49.
HSG RIBB FLG 6BOLT PLT890-466C50.
RIVET,BUTTON HEAD 1/4 X 1/2800-213C51.

4.0 MM 15 DISK (21 DEG BEVEL)820-287C52.
BEARING AA205DD188-001V53.
25P ECCENTRIC HEX ADJUSTER812-327C54.

SEED TUBE 25S HOOK CLIP198-331D56.
DJ PLANTER STYLE SEED SENSOR833-222C57.
25 SERIES SEED FLAP CLIP404-189D58.

25P WIDE ELIMINATOR BUSHNG ASY298-881S61.
25P NARROW ELIMINATOR BUSH ASY298-882S61.
ELBOW PTC 1/4 X 3/8830-424C62.

RevisionCommentsPart DescriptionPart No.Ref.

S/N A1056S+25P MID PRESS WHEEL MOUNT199-141H55.
S/N A1055S-RPBY 199-147A199-109H55.

S/N A1055S-SEED FLAP, UHMW, LONG817-349C59.
S/N A1056S+SEED FLAP, RUBBER, SEED-LOK816-302C60.

401-312P - 94 - 11/21/13

Table of Contents Part Number Index

25 Series Opener Body (continued)

(Applies to 3PYP only)

This Page Intentionally Left Blank

Opener

11/21/13 - 95 - 401-312P

Table of Contents Part Number Index

Hub Assembly (815-255C & 204-084S)

(Applies to 3PYP only)

22747

401-312P - 96 - 11/21/13

Table of Contents Part Number Index

Hub Assembly (815-255C & 204-084S)

(Applies to 3PYP only)

Image No.dwg22747
MARTIN HA13270 SPINDLEA2701.
MARTIN 3 LIP SEAL (JD AA26234)CR149712.
BRG CONE 1.00ID L44643822-030C3.
BRG CUP 1.98OD L44610822-080C4.
RHSNB 7/16-14X1 1/2 GR5802-787C5.
MARTIN HA13270 HUB HOUSINGHU136.
NUT HEX WHIZ 7/16-14 PLT803-052C7.
WASHER FLAT 3/4 SAE PLT804-025C8.
NUT HEX SLOTTED 3/4-16803-053C9.
GREASE CAP FOR MARTIN 815-255CHS132810.
PIN COTTER 5/32 X 1 1/4 LG805-045C11.
RHSNB 1/2-13X1 1/4 GR5802-214C12.
NARROW HUB BOLT SPACER204-329D13.
NARROW COULTER HUB204-328D14.
BRG BALL 1.18IDX2.44OD 5206KPP822-215C15.
RPBY 800-005C800-232C16.
HHCS 5/8-11X1 1/2 GR5802-051C17.

Opener

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 12-17GP25S NARROW HUB ASM204-084S18.
Includes items 1-11ROW CLEANER HUB ASM815-255C19.

11/21/13 - 97 - 401-312P

Table of Contents Part Number Index

Rigid 13" Row Cleaner

(Applies to 3PYP only)

22773

401-312P - 98 - 11/21/13

Table of Contents Part Number Index

Rigid 13" Row Cleaner

(Applies to 3PYP only)

Image No.dwg22773
UMC RC PIVOT TUBE207-067D1.
DOUBLE ARM RC WLD207-099H2.
RHSNB 1/2-13X1 3/4 GR5802-331C3.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C4.
ROW CLEANER HUB ASM815-255C5.

RC ARM PIVOT BUSHING817-615C6.
RC HUB LOCK828-057C7.
RIGID 13'" ROW CLEANER LH828-058C8.
RIGID 13'" ROW CLEANER RH828-059C8.
RIGID ROW CLEANER ASM RH207-142V9.
RIGID ROW CLEANER ASM LH207-143V9.
DEPTH BEND WHEEL828-060C10.
DECAL SHARP OBJECT WARNING818-525C11.
UM ROW CLEAN DOWN STOP WLDM207-148H12.
RHSNB 5/16-18X1 1/4 GR5802-009C13.
NUT HEX 5/16-18 PLT803-008C14.
WASHER LOCK SPRING 5/16 PLT804-009C15.
WASHER FLAT 1/2 USS PLT804-017C16.
WASHER FLAT 1 SAE804-029C17.

Opener

RevisionCommentsPart DescriptionPart No.Ref.

Refer to "Hub Assembly (815-255C &

204-084S)" for breakdown

11/21/13 - 99 - 401-312P

Table of Contents Part Number Index

Row Cleaner Unit Mount Assembly (S/N A1006S-)

(Applies to 3PYP only)

22918

401-312P - 100 - 11/21/13