Great Plains 3PD30 User Manual
Table of Contents Part Number Index
Parts Manual
3PD12, 3PD14, 3PD15, 3PD20, 3PD27 and 3PD30
All 3PD Models 1990 and earlier
Three Point Drill
Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
16667
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2007 Printed 12/26/12 118-262D-h
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................6
Using This Manual...............................................................6
Manual Replacement Information.......................................6
Manual Revisions................................................................6
Touch-up Paint....................................................................6
Hardware Legend................................................................7
Replacement Hardware......................................................7
Serial Numbers...................................................................7
Part Number Service Coding..............................................7
Box and Frame...............................................................8
Box To Frame (1983 <->1990)............................................8
Box To Frame-3PD12 And 3PD15 (1982).........................10
Box To Frame-3PD14 And 3PD20 (1982 And Earlier)......12
Lid And Step......................................................................14
Small Seeds Box (1983<-> 1990) (Option).......................16
Small Seeds Box Mount (1983 <-> 1990) (Option)...........18
Small Seeds Box-Gandy Seed Box (1982 And Earlier)
(Option).......................................................................20
Fertilizer Box (Option).......................................................22
Fertilizer Box Slow Moving Vehicle Sign (Option).............24
Metering.......................................................................26
Seed Rate Handle (1983 <-> 1990)..................................26
Seed Rate Handle (1982 And Earlier)...............................28
3PD12 Feeder Cup Channel (1983 <-> 1990)..................30
3PD14 Feeder Cup Channel (1983 <-> 1990)..................32
3PD15 Feeder Cup Channel (1983 <->1990)...................34
3PD20 Feeder Cup Channel (1983 <-> 1990)..................36
3PD27 Feeder Cup Channel.............................................38
3PD30 Feeder Cup Channel.............................................42
3PD12 & 3PD15 Feeder Cup Channel (1982 And
Earlier)........................................................................46
3PD14 And 3PD20 Feeder Cup Channel (1982 And
Earlier)........................................................................50
Small Seeds Metering (Option).........................................54
3PD12 Fertilizer Tray (Option)...........................................58
3PD14 And 3PD27 Fertilizer Tray (Option)........................60
3PD15 Fertilizer Tray (Option)...........................................64
3PD20 Fertilizer Tray (Option)...........................................68
Gauge Wheel and Drives.............................................70
Gauge Wheel Drive (1984 And Earlier).............................70
Gauge Wheel Drive (1985 <-> 1990)................................74
Non-Drive Gauge Wheel...................................................78
Jack Shaft Drive................................................................80
Small Grass Seeds Drive (Option)....................................82
Fertilizer Drive (Option).....................................................84
Spring Loaded Gauge Wheel Link (Option)......................86
Openers........................................................................88
Single Disk Opener (1982 And Earlier).............................88
Single Disk Opener (1983)................................................90
Single Disk Opener (1984)................................................94
Single Disk Opener (1985 <-> 1990)................................96
Double Disk Opener (1982 And Earlier)............................98
Double Disk Opener (1983)............................................100
Double Disk Opener (1984)............................................104
Double Disk Opener (1985 <-> 1990).............................106
Double Disk Fertilizer Opener Option)............................108
Double Disk.....................................................................110
Depth Band (121-705A) (Option)....................................112
Small Seeds Hose Channel Mounting (Option)..............114
Press Wheels.............................................................116
2" x 13" Double "V" Press Wheel (1983 And Earlier)......116
2" x 13" Double "V" Press Wheel (1984 <-> 1990).........118
2" x 13" Single Press Wheel (1983 And Earlier).............120
2" x 13" Single Press Wheel (1984 <-> 1990).................122
4" x 12" Double Arm Press Wheel (1983).......................124
4" x 12" Press Wheel (1984 <-> 1990)............................126
4" x 12" Single Arm Press Wheel (1983)........................128
4" x 12" V-Groove Press Wheel (1982 And Earlier).........130
Covering Chain (122-078A)............................................132
Rubber Tire Depth Control Wheel (Option).....................134
Outside Double Disk Scraper (1981) (Option)................136
Outside Double Disk Scraper (Option)............................138
Decals.........................................................................140
Decal Placement.............................................................140
Markers.......................................................................142
3PD12, 3PD14 And 3PD15 Standard Marker.................142
3PD14 And 3PD20 Rigid Hydraulic Marker (1983 And Earlier
).................................................................................144
3PD15 And 3PD20 Flat Fold Marker...............................146
3PD20, 3PD27 & 3PD30 Standard Marker.....................148
3PD27 And 3PD30 Flat Fold Marker...............................150
Flat Fold Single Marker Hydraulics.................................154
Standard Marker Hydraulics............................................156
Hydraulic Cylinder 2 x 8 x 1.12 (810-005C)....................158
Hydraulics w/Sequence Valve.........................................160
Marker Disk (107-008S) (1980 And Earlier)....................162
Marker Disk (113-007H)..................................................164
Marker Disk (113-305K)..................................................166
Cross Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C).....168
Midway Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C)...170
Sequence Valve (810-006C)...........................................172
Pull Hitch....................................................................174
Pull Hitch Frame (1984 And Earlier)................................174
Pull Hitch Frame (1985 <->1990)....................................176
Pull Hitch Hub And Tire...................................................178
Track Removers.........................................................180
Gauge Wheel Track Removers........................................180
Tractor Tire Track Removers............................................182
© Copyright 2007 All rights reserved Printed 12/26/12
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
118-262D-h - 2 - 12/26/12
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
Table of Contents Part Number Index
Table of Contents (continued)
Harrows..................................................................184
Harrow........................................................................184
Endwise Transport................................................186
Endwise Transport (1981)..........................................186
Part Number Index................................................188
12/26/12 - 3 - 118-262D-h
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
2
2" x 13" Double "V" Press Wheel (1983 And Earlier)......116
2" x 13" Double "V" Press Wheel (1984 <-> 1990).........118
2" x 13" Single Press Wheel (1983 And Earlier).............120
2" x 13" Single Press Wheel (1984 <-> 1990).................122
3
3PD12 & 3PD15 Feeder Cup Channel (1982 And
Earlier)........................................................................46
3PD12 Feeder Cup Channel (1983 <-> 1990)..................30
3PD12 Fertilizer Tray (Option)...........................................58
3PD12, 3PD14 And 3PD15 Standard Marker.................142
3PD14 And 3PD20 Feeder Cup Channel (1982 And
Earlier)........................................................................50
3PD14 And 3PD20 Rigid Hydraulic Marker (1983 And Earlier
).................................................................................144
3PD14 And 3PD27 Fertilizer Tray (Option)........................60
3PD14 Feeder Cup Channel (1983 <-> 1990)..................32
3PD15 And 3PD20 Flat Fold Marker...............................146
3PD15 Feeder Cup Channel (1983 <->1990)...................34
3PD15 Fertilizer Tray (Option)...........................................64
3PD20 Feeder Cup Channel (1983 <-> 1990)..................36
3PD20 Fertilizer Tray (Option)...........................................68
3PD20, 3PD27 & 3PD30 Standard Marker.....................148
3PD27 And 3PD30 Flat Fold Marker...............................150
3PD27 Feeder Cup Channel.............................................38
3PD30 Feeder Cup Channel.............................................42
4
4" x 12" Double Arm Press Wheel (1983).......................124
4" x 12" Press Wheel (1984 <-> 1990)............................126
4" x 12" Single Arm Press Wheel (1983)........................128
4" x 12" V-Groove Press Wheel (1982 And Earlier).........130
B
Box To Frame (1983 <->1990)............................................8
Box To Frame-3PD12 And 3PD15 (1982).........................10
Box To Frame-3PD14 And 3PD20 (1982 And Earlier)......12
C
Covering Chain (122-078A)............................................132
Cross Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C).....168
D
Decal Placement.............................................................140
Depth Band (121-705A) (Option)....................................112
Double Disk.....................................................................110
Double Disk Fertilizer Opener Option)............................108
Double Disk Opener (1982 And Earlier)............................98
Double Disk Opener (1983)............................................100
Double Disk Opener (1984)............................................104
Double Disk Opener (1985 <-> 1990).............................106
E
Endwise Transport (1981)...............................................186
F
Fertilizer Box (Option).......................................................22
Fertilizer Box Slow Moving Vehicle Sign (Option).............24
Fertilizer Drive (Option).....................................................84
Flat Fold Single Marker Hydraulics.................................154
G
Gauge Wheel Drive (1984 And Earlier).............................70
Gauge Wheel Drive (1985 <-> 1990)................................74
Gauge Wheel Track Removers........................................180
H
Harrow.............................................................................184
Hydraulic Cylinder 2 x 8 x 1.12 (810-005C)....................158
Hydraulics w/Sequence Valve.........................................160
J
Jack Shaft Drive................................................................80
L
Lid And Step......................................................................14
M
Marker Disk (107-008S) (1980 And Earlier)....................162
Marker Disk (113-007H)..................................................164
Marker Disk (113-305K)..................................................166
Midway Hydraulic Cylinder 2.5 x 20 x 1.12 (810-118C)...170
N
Non-Drive Gauge Wheel...................................................78
O
Outside Double Disk Scraper (1981) (Option)................136
Outside Double Disk Scraper (Option)............................138
P
Pull Hitch Frame (1984 And Earlier)................................174
Pull Hitch Frame (1985 <->1990)....................................176
Pull Hitch Hub And Tire...................................................178
R
Rubber Tire Depth Control Wheel (Option).....................134
S
Seed Rate Handle (1982 And Earlier)...............................28
Seed Rate Handle (1983 <-> 1990)..................................26
Sequence Valve (810-006C)...........................................172
Single Disk Opener (1982 And Earlier).............................88
Single Disk Opener (1983)................................................90
Single Disk Opener (1984)................................................94
Single Disk Opener (1985 <-> 1990)................................96
Small Grass Seeds Drive (Option)....................................82
Small Seeds Box (1983<-> 1990) (Option).......................16
118-262D-h - 4 - 12/26/12
Table of Contents Part Number Index
Alphabetized Table of Contents (continued)
Small Seeds Box Mount (1983 <-> 1990) (Option)......18
Small Seeds Box-Gandy Seed Box (1982 And Earlier)
(Option)..................................................................20
Small Seeds Hose Channel Mounting (Option).........114
Small Seeds Metering (Option)....................................54
Spring Loaded Gauge Wheel Link (Option).................86
Standard Marker Hydraulics.......................................156
T
Tractor Tire Track Removers.......................................182
12/26/12 - 5 - 118-262D-h
Table of Contents Part Number Index
118-262D-h - 6 - 12/26/12
Table of Contents Part Number Index
12/26/12 - 7 - 118-262D-h
Table of Contents Part Number Index
Box To Frame (1983 <->1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17386
118-262D-h - 8 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Box To Frame (1983 <->1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17386
For 3PD12 drills.12' 3-PT DRILL FRAME WELDMENT117-010H1.
For 3PD14 drills.14' 3-PT FRAME WELDMENT117-011H1.
For 3PD15 drills.15' 3-PT FRAME WELDMENT117-009H1.
For 3PD20 drills.20' FRAME WELDMENT117-008H1.
For 3PD27 drills.27' 3-PT FRAME WELDMENT117-012H1.
For 3PD30 drills.30 FT. 3-PT. FRAME WELDMENT117-013H1.
PIN HITCH 1 1/8 X 4 11/16 USEL805-008C2.
For 3PD27 drills.PIN HITCH 1 1/8 X 7 1/16 USELG805-039C2.
For 3PD30 drills.PIN, HITCH,1 7/16 X 6 5/16 PLT805-087C2.
BOLT ON LOWER HITCH LH117-117D3.
BOLT ON LOWER HITCH RH117-118D4.
WASHER LOCK SPRING 5/8 PLT804-022C5.
NUT HEX 5/8-11 PLT803-021C6.
NUT HEX 1/2-13 PLT803-020C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
LOWER HITCH SPREADER TUBE117-121D9.
HHCS 1/2-13X5 GR5802-045C10.
BOLT ON UPPER HITCH LH117-128D11.
BOLT ON UPPER HITCH RH117-127D12.
UPPER HITCH SPREADER TUBE117-122D13.
HHCS 1/2-13X4 GR5802-044C14.
PIN HITCH 1 X 3 3/8 USABLE LG805-007C15.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C16.
U-BOLT 5/8-11 X 3 17/32 X 5806-006C17.
For 3PD12 drills.12' 3-PT BOX WELDMENT118-116H18.
For 3PD14 and 3PD27 drills.14' 3-PT BOX WELDMENT118-123H18.
For 3PD15 drills.15' 3-PT BOX WELDMENT118-115H18.
For 3PD20 drills.20' 3-PT BOX WELDMENT118-114H18.
For 3PD30 drills.30 FT.3-PT.LH.15FT.BOX WELDMT118-145H18.
For 3PD30 drills.30'-3 PT RH BOX WELDMENT118-153H18.
SCREW RD HD SLT10-24X1/2 PLT801-003C19.
HHCS 1/2-13X1 1/4 GR5802-034C20.
SIGHT GLASS GASKET816-013C21.
GRAIN LEVEL SIGHT GLASS817-007C22.
For 3PD30 drills.45 DEGREE CORNER SIGHT GLASS817-036C22.
For 3PD30 drills.SIGHT GLASS RETAINER175-043D22.
WASHER INTERNAL STAR #10 PLT804-004C23.
NUT HEX 10-24 PLT803-001C24.
2nd rev.VINYL SEAL 3/8 X 1/2 (PER FT)816-004C25.
use existingstock; 1st rev.RPBY 816-004C118-156D25.
use existingstock; 1st rev.RPBY 816-004C118-157D25.
2nd rev.VINYL SEAL 3/8 X 5/8/FT816-001C26.
use existingstock; 1st rev.RPBY 816-001C118-155D26.
12/26/12 - 9 - 118-262D-h
Table of Contents Part Number Index
Box To Frame-3PD12 And 3PD15 (1982)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17502
118-262D-h - 10 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Box To Frame-3PD12 And 3PD15 (1982)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17502
12' BOX WELDMENT118-103H1.
15' BOX WELDMENT118-100H1.
HHCS 1/2-13X1 1/4 GR5802-034C2.
WASHER LOCK SPRING 1/2 PLT804-015C3.
NUT HEX 1/2-13 PLT803-020C4.
SIGHT GAUGE GLASS817-001C5.
SCREW RD HD SLT10-24X1/2 PLT801-003C6.
WASHER INTERNAL STAR #10 PLT804-004C7.
NUT HEX 10-24 PLT803-001C8.
VINYL SEAL 3/8 X 5/8/FT816-001C9.
VINYL SEAL 3/8 X 1/2 (PER FT)816-004C10.
12' FRAME WELDMENT117-004H11.
15' FRAME WELDMENT117-005H11.
PIN HITCH 1 X 3 3/8 USABLE LG805-007C12.
PIN HAIR COTTER .148 WIRE805-032C13.
LOWER HITCH WELDMENT117-003H14.
TIE PLATE - HITCH 13' & 20'117-016D15.
HHCS 1-8X7 GR5802-075C16.
WASHER LOCK SPRING 1 PLT804-027C17.
NUT HEX 1-8 PLT803-031C18.
PIN HITCH 1 1/8 X 4 11/16 USEL805-008C19.
12/26/12 - 11 - 118-262D-h
Table of Contents Part Number Index
Box To Frame-3PD14 And 3PD20 (1982 And Earlier)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17503
118-262D-h - 12 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Box To Frame-3PD14 And 3PD20 (1982 And Earlier)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17503
For 3PD14 drills.FRAME WELDMENT 13'8117-002H1.
For 3PD20 drills.FRAME WELDMENT 20'117-001H1.
LOWER HITCH WELDMENT117-003H2.
TIE PLATE - HITCH 13' & 20'117-016D3.
HHCS 1-8X7 GR5802-075C4.
NUT HEX 1-8 PLT803-031C5.
WASHER LOCK SPRING 1 PLT804-027C6.
PIN HITCH 1 1/8 X 4 11/16 USEL805-008C7.
PIN HAIR COTTER .148 WIRE805-032C8.
PIN HITCH 1 X 3 3/8 USABLE LG805-007C9.
For 3PD14 drills.82 BOX WELDMENT RH118-016H10.
For 3PD20 drills.10' BOX WELDMENT RH118-018H10.
For 3PD14 drills.82 BOX WELDMENT LH118-015H11.
For 3PD20 drills.10' BOX WELDMENT LH118-017H11.
SIGHT GAUGE GLASS817-001C12.
HHCS 1/2-13X1 1/4 GR5802-034C13.
2nd rev.HHCS 1/2-13X1 1/2 GR5802-091C14.
1st rev.REPLACED BY 802-091C802-035C14.
WASHER LOCK SPRING 1/2 PLT804-015C15.
NUT HEX 1/2-13 PLT803-020C16.
For 3PD14 drills.BOX MTG BAR - CENTER117-018D17.
VINYL SEAL 3/8 X 1/2 (PER FT)816-004C18.
VINYL SEAL 3/8 X 5/8/FT816-001C19.
NUT HEX 10-24 PLT803-001C20.
WASHER INTERNAL STAR #10 PLT804-004C21.
SCREW RD HD SLT10-24X1/2 PLT801-003C22.
For 3PD20 drills.BOX SPACER 20'118-023D23.
1981 and earlier.LEG STAND WELDMENT119-010H24.
1981 and earlier.PIN BENT 1/2 X 3 W/HAIRPIN 12B805-035C25.
Part not available.26.
12/26/12 - 13 - 118-262D-h
Table of Contents Part Number Index
Lid And Step
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17388
118-262D-h - 14 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Lid And Step
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17388
JACK STAND ASSEMBLY119-105H1.
For 3PD30 drills.JACK STAND ASSY.119-145H1.
PIN 3/8 X 3 USABLE LW/PIN805-001C2.
PIN HAIR COTTER .092 WIRE805-031C3.
HHCS 1/2-13X3 1/2 GR5802-041C4.
NUT LOCK 1/2-13 PLT803-019C5.
1981<->1990 except3PD30.STAND TUBE ASSEMBLY119-106H6.
For 3PD30 drills.STAND TUBE ASSY.119-144H6.
NUT HEX 3/8-16 PLT803-014C7.
WASHER LOCK SPRING 3/8 PLT804-013C8.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C9.
NUT HEX 1/2-13 PLT803-020C10.
WASHER LOCK SPRING 1/2 PLT804-015C11.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C12.
NUT-LOCK 1/4-20 PLT803-007C13.
RUBBER LID LATCH816-008C14.
3rd rev.HHCS 1/4-20X1 1/2 GR5802-167C15.
2nd rev.RPBY 802-167C802-006C15.
1st rev.1982HHCS 1/4-20X1 GR5802-005C15.
For 3PD12 drills.12' BOX LID WELDMENT119-108H16.
For 3PD14 and 3PD15 drills.BOX LID WELDMENT 14'119-007H16.
For 3PD12 and 3PD20 drills.BOX LID WELDMENT 20'119-008H16.
NUT LOCK 5/16-18 PLT803-011C17.
HHCS 5/16-18X3/4 GR5802-007C18.
SPRING LID HING EXT807-001C19.
2nd rev.LID LATCH119-224D20.
1st rev.RPBY 119-224D119-001H20.
PIN CLEVIS .491 X 2 49/64 USEL805-014C21.
PIN COTTER5/32 X 1 PLT805-019C22.
NUT-HEX 1/4-20 PLT803-006C23.
WASHER LOCK SPRING 1/4 PLT804-006C24.
LID LATCH STRAP110-015D25.
LID HINGE STRAP SPACER110-016D26.
NUT HEX 10-24 PLT803-001C27.
WASHER INTERNAL STAR #10 PLT804-004C28.
HOOD BRACKET890-016C29.
SCREW RD HD SLT10-24X1/2 PLT801-003C30.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C31.
3-PT STEP RETAINER119-032D32.
HHCS 3/8-16X1 1/4 GR5802-079C33.
84 STEP119-106D34.
For 3PD14, 3PD15, 3PD27 and
3PD30 drills.
For 3PD12 and 3PD20 drills.STEP 120119-014D34.
1984<->1990STEP ANGLE119-108D35.
1984U-BOLT 3/8-16X2X4806-001C36.
1984STEP RETAINER119-100D37.
1983STEP BRACKET890-066C38.
1982 and earlier.STEP MOUNT ANGLE119-015D39.
1982 and earlier.STEP HANGER BRACE119-027D40.
1982 and earlier.HHCS 3/8-16X1 1/4 GR5802-079C41.
1982 and earlier.WASHER FLAT3/8 USS PLT804-011C42.
1981 and earlier.HINGE WELDED TO BOX43.
1981 and earlier.SCREW RD HD SLT 10-24X1/2 PLT801-003C44.
1981 and earlier.WASHER INTERNAL STAR #10 PLT804-004C45.
1981 and earlier.NUT HEX 10-24 PLT803-001C46.
12/26/12 - 15 - 118-262D-h
Table of Contents Part Number Index
Small Seeds Box (1983<-> 1990) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17448
118-262D-h - 16 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Small Seeds Box (1983<-> 1990) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17448
6-96 GRASS SEED BOX RH123-059H1.
6-96 GRASS SEED BOX LH123-060H1.
6-59 GRASS SEED BOX RH123-086H1.
6-59 GRASS SEED BOX LH123-087H1.
7-96 GRASS SEED BOX LH123-088H1.
7-96 GRASS SEED BOX RH123-089H1.
7 1/2-96 GRASS SEED BOX LH123-090H1.
7 1/2-96 GRASS SEED BOX RH123-091H1.
10-96 GRASS SEED BOX LH123-076H1.
10-96 GRASS SEED BOX RH123-077H1.
6-81 GRASS SEED BOX LH123-062H1.
6-81 GRASS SEED BOX RH123-061H1.
12-96 GRASS SEED BOX LH123-094H1.
12-96 GRASS SEED BOX RH123-095H1.
7-81 GRASS SEED BOX LH123-097H1.
7-81 GRASS SEED BOX RH123-096H1.
7 1/2-81 GRASS SEED BOX LH123-099H1.
7 1/2-81 GRASS SEED BOX RH123-098H1.
8-81 GRASS SEED BOX LH123-101H1.
8-81 GRASS SEED BOX RH123-100H1.
10-81 GRASS SEED BOX LH123-103H1.
10-81 GRASS SEED BOX RH123-102H1.
12-81 GRASS SEED BOX LH123-106H1.
12-81 GRASS SEED BOX RH123-105H1.
8-96 GRASS SEED BOX LH123-092H1.
8-96 GRASS SEED BOX RH123-093H1.
7-59 GRASS SEED BOX LH123-085H1.
7-59 GRASS SEED BOX RH123-084H1.
7 1/2-59 GRASS SEED BOX LH123-083H1.
7 1/2-59 GRASS SEED BOX RH123-082H1.
10-59 GRASS SEED BOX LH123-081H1.
10-59 GRASS SEED BOX RH123-080H1.
12-59 GRASS SEED BOX LH123-079H1.
12-59 GRASS SEED BOX RH123-078H1.
NUT HEX 6-32 SS803-065C2.
WASHER LOCK #6 SS804-050C3.
LATCH FERTTRAY DOOR800-030C4.
SCREW PAN HD 6-32 X 1/2 SS801-017C5.
HHCS 1/4-20X5/8 GR5802-078C6.
SEED ADJUSTMENT SUPPORT123-118D7.
SPRING EXT LID LATCH807-018C8.
LID LOCK BAR123-125D9.
NUT LOCK 1/4-20 PLT803-007C10.
U-BOLT 1/4-20 X 15/16 X 1 PLT806-025C11.
NUT HEX 1/4-20 PLT803-006C12.
96 INCH SEED BOX LID WELDMENT123-063H13.
81 BOX LID WELDM'T123-350H13.
Repl. by 123-350h.81 INCH SEED BOX LID WELDMENT123-064H13.
59 SEED BOX LID WELDMENT123-121H13.
PARTITION SMALL SEED BOX123-310D14.
SEED BOX SPROCKET CAP123-051D15.
WASHER FLAT #10 SAE PLT804-046C16.
WASHER INTERNAL STAR #10 PLT804-004C17.
NUT HEX 10-24 PLT803-001C18.
SCREW RD HD SLT10-24X1/2 PLT801-003C19.
12/26/12 - 17 - 118-262D-h
Table of Contents Part Number Index
Small Seeds Box Mount (1983 <-> 1990) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
11088
118-262D-h - 18 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Small Seeds Box Mount (1983 <-> 1990) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg11088
NUT HEX 5/16-18 PLT803-008C1.
WASHER LOCK SPRING 5/16 PLT804-009C2.
3-POINT GRASS BOX MOUNT BRKT123-287H3.
HHCS 5/16-18X1 GR5802-159C4.
3 PT & EW MOUNT BACKPLATE123-238D5.
12 CENTER MOUNT BRACKET123-288H6.
15 CENTER MOUNT BRACKET123-289H6.
14 CENTER MOUNT BRACKET123-290H6.
WASHER FLAT 5/16 USS PLT804-010C7.
12/26/12 - 19 - 118-262D-h
Table of Contents Part Number Index
Small Seeds Box-Gandy Seed Box (1982 And Earlier) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17556
118-262D-h - 20 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Small Seeds Box-Gandy Seed Box (1982 And Earlier) (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17556
For 3PD12 drills.GANDY SEEDER BOX 12'823-006C1.
For 3PD14 drills.GRASS SEEDER 14' BOX823-002C1.
For 3PD20 drills.GRASS SEEDER 10' BOX823-001C1.
GRASS SEEDER SPROCKET WELDMENT123-002H2.
SCREW SET 1/4-28 SH X 1/2 LG801-009C3.
2nd rev.For Type 1 drive.CHAIN RL 20-40A 46 PITCHES136-007D4.
use existingstock; 1st rev.For Type 1 drive.RPBY 136-007D809-009C4.
2nd rev.For Type 2 drive.CHAIN RL 20-40A 54 PITCHES136-006D4.
use existingstock; 1st rev.For Type 2 drive.RPBY 136-006D809-008C4.
SEED/FERT ADAPTOR HUB145-006E5.
KEY 1/4 X 1123-004D6.
SPROCKET 40B16 X 1 BORE808-011C7.
SPKT 40B48 X 1 B W/KW&2-SS808-012C7.
FERT IDLER ARM ASSEMBLY145-019H8.
HHCS 5/8-11X1 1/2 GR5802-051C9.
WASHER FLAT 5/8 USS PLT804-019C10.
WASHER LOCK SPRING 5/8 PLT804-022C11.
NUT HEX 5/8-18 PLT803-022C12.
IDLER DISC109-064D13.
GRASS SEEDER BRACKET WELDMENT123-001H14.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
NUT HEX 3/8-16 PLT803-014C17.
U-BOLT 3/8-16X2X4806-001C18.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
GRASS SEEDER & STEP SUPPORT123-003H22.
For 3PD12 drills.12' STEP119-109A23.
For 3PD14 and 3PD15 drills.14' & 15' STEP119-110A23.
For 3PD20 drills.20' STEP119-111A23.
STEP RETAINER119-100D24.
12/26/12 - 21 - 118-262D-h
Table of Contents Part Number Index
Fertilizer Box (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17406
118-262D-h - 22 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Fertilizer Box (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17406
For 3PD14 and 3PD27 drills.14' 3-PT FERT BOX WELDMENT142-009H1.
For 3PD20 drills.20'- 3-PT FERT BOX WELDMENT142-010H1.
For 3PD12 drills.12' FERTILIZERBOX WELDMENT142-041H1.
For 3PD15 drills.15' FERTILIZERBOX WELDMENT142-042H1.
For 3PD12 drills.12' BOX LID WELDMENT119-108H2.
For 3PD14 and 3PD27 drills.BOX LID WELDMENT 14'119-007H2.
For 3PD20 drills.BOX LID WELDMENT 20'119-008H2.
FERTILIZER STEP HANGER119-132H3.
For 3PD12 and 3PD20 drills.STEP 120119-014D4.
For 3PD 14, 3PD15 and 3PD27 drills.84 STEP119-106D4.
3-PT STEP RETAINER119-032D5.
HHCS 3/8-16X1 1/4 GR5802-079C6.
WASHER LOCK SPRING 3/8 PLT804-013C7.
NUT HEX 3/8-16 PLT803-014C8.
NAME PLATE ADJ. GUIDE SHORT819-005C9.
SCREW RD HD 8-32 X 3/8 BRASS801-001C10.
WASHER FLAT #8 BRASS804-003C11.
WASHER INTERNAL STAR #8 BRASS804-002C12.
NUT HEX 8-32 BRASS803-035C13.
PIN COTTER5/32 X 1 PLT805-019C14.
LID LATCH STRAP110-015D15.
HHCS 1/4-20X1 1/2 GR5802-167C16.
LID HINGE STRAP SPACER110-016D17.
NUT-HEX 1/4-20 PLT803-006C18.
WASHER LOCK SPRING 1/4 PLT804-006C19.
2nd rev.LID LATCH119-224D20.
1st rev.RPBY 119-224D119-001H20.
SPRING LID HING EXT807-001C21.
HHCS 5/16-18X3/4 GR5802-007C22.
NUT LOCK 5/16-18 PLT803-011C23.
PIN CLEVIS .491 X 2 49/64 USEL805-014C24.
RUBBER LID LATCH816-008C25.
NUT-LOCK 1/4-20 PLT803-007C26.
VINYL SEAL 3/8 X 5/8/FT816-001C27.
VINYL SEAL 3/8 X 1/2 (PER FT)816-004C28.
HOOD BRACKET890-016C29.
SCREW RD HD SLT10-24X1/2 PLT801-003C30.
WASHER INTERNAL STAR #10 PLT804-004C31.
NUT HEX 10-24 PLT803-001C32.
BOX MOUNTING HOLE SUPPORT142-035D33.
PARTITION SUPPORT142-036D34.
12/26/12 - 23 - 118-262D-h
Table of Contents Part Number Index
Fertilizer Box Slow Moving Vehicle Sign (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
10395
118-262D-h - 24 - 12/26/12
Table of Contents Part Number Index
Box and Frame
Fertilizer Box Slow Moving Vehicle Sign (Option)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg10395
DECAL SLOWMOVING-GALV. BACKED818-055C1.
SMV MOUNTING BLADE890-153C2.
HHCS 1/4-20X3/4 GR5802-004C3.
WASHER FLAT 1/4 SAE PLT804-007C4.
SCREW RD HD 1/4-20 X 5/8801-018C5.
NUT-HEX 1/4-20 PLT803-006C6.
WASHER LOCK SPRING 1/4 PLT804-006C7.
12/26/12 - 25 - 118-262D-h
Table of Contents Part Number Index
Seed Rate Handle (1983 <-> 1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17904
118-262D-h - 26 - 12/26/12
Table of Contents Part Number Index
Metering
Seed Rate Handle (1983 <-> 1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17904
SEED RATE ADJ HANDLE WMT FRONT120-109H1.
ADJUSTMENT HANDLE PIVOT109-069D2.
1985 <-> 1990.WASHER FLAT 5/8 USS PLT804-019C3.
2nd rev.1983 <-> 1984.WASHER FLAT 3/8 USS PLT804-011C3.
1st rev.PIN COTTER3/16 X 1 1/4 PLT805-016C4.
HHCS 3/8-16X3/4 GR5802-014C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
WASHER FLAT 3/8 SAE PLT804-012C7.
WASHER ADJ HANDLE BRG804-001C8.
BRG BALL 17IDX40OD 6203822-008C9.
SNAP RING EXT 17 MM800-003C10.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H11.
NUT WING 1/2-13 PLT803-016C12.
SEED RATE GAUGE MOUNT WELDMNT120-110H13.
NAME PLATE ADJ. GUIDE SHORT819-005C14.
SCREW RD HD 8-32 X 3/8 BRASS801-001C15.
WASHER FLAT #8 BRASS804-003C16.
WASHER INTERNAL STAR #8 BRASS804-002C17.
NUT HEX 8-32 BRASS803-035C18.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
2nd rev.MACHINED ADJUSTMENT SPOOL109-091D22.
1st rev.RPBY 109-091D109-013H22.
PIN ROLL 3/16X1 1/4 PLT805-023C23.
12/26/12 - 27 - 118-262D-h
Table of Contents Part Number Index
Seed Rate Handle (1982 And Earlier)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17905
118-262D-h - 28 - 12/26/12
Table of Contents Part Number Index
Metering
Seed Rate Handle (1982 And Earlier)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg17905
SEED ADJ HANDLE120-061H1.
ADJUSTMENT HANDLE PIVOT109-069D2.
ADJ PIVOT PIN WASHER109-045D3.
PIN COTTER3/16 X 1 1/4 PLT805-016C4.
HHCS 3/8-16X3/4 GR5802-014C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
WASHER FLAT 3/8 SAE PLT804-012C7.
WASHER ADJ HANDLE BRG804-001C8.
BRG BALL 17IDX40OD 6203822-008C9.
SNAP RING EXT 17 MM800-003C10.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H11.
NUT WING 1/2-13 PLT803-016C12.
ADJ TAG MOUNT120-062H13.
NAME PLATE ADJ. GUIDE SHORT819-005C14.
SCREW RD HD 8-32 X 3/8 BRASS801-001C15.
WASHER FLAT #8 BRASS804-003C16.
WASHER INTERNAL STAR #8 BRASS804-002C17.
NUT HEX 8-32 BRASS803-035C18.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 3/8-16 PLT803-014C21.
PIN ROLL 1/4 X 3/4 PLT805-026C22.
PIN ROLL 3/16X1 1/4 PLT805-023C23.
2nd rev.MACHINED ADJUSTMENT SPOOL109-091D24.
1st rev.RPBY 109-091D109-013H24.
RHSNB 3/8-16X1 GR5802-015C25.
1979 <-> 1980SEED GAUGE MOUNT120-014D26.
1979 <-> 1980Part not available.27.
1979 <-> 1980Part not available.28.
12/26/12 - 29 - 118-262D-h
Table of Contents Part Number Index
3PD12 Feeder Cup Channel (1983 <-> 1990)
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)
17394
118-262D-h - 30 - 12/26/12
Loading...