Great Plains 2SF30 User Manual

Table of Contents Part Number Index

Parts Manual

24' & 30' 2-Section Drill

2SF24 & 2SF30

1986+

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

13191

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2013 Printed 11/05/13 155-015P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

Frame..............................................................................8

Tongue & Pull Bar...............................................................8

Rotating Square Hammerblow Jack (890-610C)...............10

Square Tube Butler Jack (890-610C)................................12

Rotating Square Jack (116-065K).....................................14

Mainframe & Slide Assembly............................................16

Pivot Post..........................................................................18

Transport & Gauge Wheel...........................................20

Transpor t Wheel................................................................20

Box Assembly..............................................................22

Box To Frame....................................................................22

Lid & Step..........................................................................24

Ladder Assembly..............................................................26

Small Seeds Box Assembly..............................................28

Small Seeds Box Mounting Assembly...............................30

Fertilizer Box Assembly.....................................................32

Fertilizer Slow Moving Vehicle Assembly..........................34

Native Grass Box, Lid & Step Assembly...........................36

Lights LED (2SF24 S/N 3493F+) (2SF30 S/N 3476G+)....38

Metering System..........................................................40

Feeder Cup Channel Assembly........................................40

Feeder Cup Channel Assembly........................................44

V-Bottom Feeder Cup Tray Divider (Option)......................48

Vansco Shaft Monitor (Option)..........................................50

Nede Shaft Monitor (Option).............................................52

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel

116-283A)...................................................................54

Small Seeds Metering Assembly......................................56

Fertilizer Tray Assembly....................................................60

Fertilizer Tray Assembly....................................................62

Native Grass Feed Cup Assembly....................................66

Drive.............................................................................68

Gauge Wheel Drive...........................................................68

Jack Shaft Drive................................................................72

Electric Clutch Assembly (Option).....................................74

Small Seeds Drive.............................................................76

Fertilizer Drive...................................................................78

Native Grass Drive............................................................80

Native Grass Upper Drive & Chain Guard.........................84

Native Grass Lower Drive & Chain Guard.........................86

© Copyright 2013 All rights reserved Printed 11/05/13

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

Openers........................................................................88

Option 00 Straight Arm Opener (1994+)...........................88

Double Disk Opener (Standard 1991-1993)......................92

Heavy Duty Native Grass Opener Assembly....................96

Standard Native Grass Opener Assembly......................100

Standard Fertilizer Double Disk Opener Assembly.........104

Seed Lok (122-193K And 122-194K) (Option)................108

Small Seeds Hose Retainer (Part 1)...............................110

Small Seeds Hose Retainer (Part 2)...............................112

Small Seeds Y-Tube Drop................................................114

Small Seeds Hose Channel Mounting............................116

Fertilizer Hose Retainer..................................................118

Press Wheels.............................................................120

1" x 12" Double "V" Press Wheel (Part 1).......................120

1" x 12" Double "V" Press Wheel (Part 2).......................122

1" x 12" Double "V" Press Wheel (1990-)........................124

1" X 12" Single Press Wheel...........................................126

1" x 12" Single Press Wheel (1990-)...............................128

2" x 13" Smooth Crown Press Wheel (2SF24 S/N 3236F+ &

2SF30 S/N 3046G+).................................................130

2" x 13" Smooth Crown Press Wheel (2SF24 S/N 3235F- &

2SF30 S/N 3045G-)..................................................132

2" x 13" Single Press Wheel............................................134

2" x 13" Single Press Wheel (1990-)...............................136

2" x 13" Double "V" Press Wheel....................................138

2" x 13" Double "V" Press Wheel (1990-)........................140

3" x 13" Single "V" Crown Press Wheel (2SF24 S/N 3236F+

& 2SF30 S/N 3046G+)..............................................142

3" x 13" Single "V" Crown Press Wheel (2SF24 S/N 3235F-

& 2SF30 S/N 3045G-)...............................................144

3" x 13" Single "V" Crown Press Wheel..........................146

3" x 14" Peaked Press Wheel (2SF24 S/N 3236F+ & 2SF30

S/N 3046G+).............................................................148

3" x 14" Peaked Press Wheel (2SF24 S/N 3235F- & 2SF30

S/N 3045G-)..............................................................150

3" x 14" Peaked Press Wheel..........................................152

4" x 12" Dual Rib Press Wheel........................................154

4" x 12" Smooth & Dual Rib Press Wheel.......................156

2" x 13" Heavy Duty Native Grass Press Wheel.............158

2" x 13" Native Grass Press Wheel (1990-)....................160

4" x 12" Heavy Duty Native Grass Press Wheel.............162

Covering Chain...............................................................164

Hydraulics..................................................................166

Transport Hydraulics.......................................................166

Fold Hydraulics................................................................168

Hydraulic Rod Cylinder (810-020C)................................170

Lion Hydraulic Cylinder (810-018C & 810-022C)............172

Midway Hydraulic Cylinder (810-018C & 810-022C).......174

Hydraulic Cylinder (810-147C)........................................176

Hydraulic Cylinder (810-148C)........................................178

155-015P - 2 - 11/05/13

Table of Contents Part Number Index

Table of Contents (continued)

Pilot Operated Check Valve (810-086C).....................180

Decals....................................................................182

Decal Placement........................................................182

Markers..................................................................184

Flat Fold Marker Assembly.........................................184

Standard Marker........................................................188

Marker Disk (113-563S).............................................190

Marker Disk (113-364S).............................................192

Marker Disk (113-305K).............................................194

Single Marker Hydraulics...........................................196

Single Marker-Single Acting Hydraulics.....................198

Single Marker-Double Acting Hydraulics....................200

Dual Marker Hydraulics..............................................202

Dual Marker-Single Acting Hydraulics........................204

Dual Marker-Double Acting Hydraulics......................206

Marker Midway Hydraulic Cylinder (810-118C)..........208

Marker Cross Hydraulic Cylinder (810-118C)............210

Marker Midway Hydraulic Cylinder (810-019C)..........212

Marker Cylinder (810-005C).......................................214

Marker Selector Sequence Valve (810-085C)............216

Marker Double Selector Valve (810-023C).................218

Marker Sequence Valve (810-006C)..........................220

Track Removers.....................................................222

Gauge Wheel Track Removers...................................222

Part Number Index................................................224

11/05/13 - 3 - 155-015P

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

1

1" x 12" Double "V" Press Wheel (1990-)........................124

1" x 12" Double "V" Press Wheel (Part 1).......................120

1" x 12" Double "V" Press Wheel (Part 2).......................122

1" X 12" Single Press Wheel...........................................126

1" x 12" Single Press Wheel (1990-)...............................128

2

2" x 13" Double "V" Press Wheel....................................138

2" x 13" Double "V" Press Wheel (1990-)........................140

2" x 13" Heavy Duty Native Grass Press Wheel.............158

2" x 13" Native Grass Press Wheel (1990-)....................160

2" x 13" Single Press Wheel............................................134

2" x 13" Single Press Wheel (1990-)...............................136

2" x 13" Smooth Crown Press Wheel (2SF24 S/N 3235F- &

2SF30 S/N 3045G-)..................................................132

2" x 13" Smooth Crown Press Wheel (2SF24 S/N 3236F+ &

2SF30 S/N 3046G+).................................................130

3

3" x 13" Single "V" Crown Press Wheel..........................146

3" x 13" Single "V" Crown Press Wheel (2SF24 S/N 3235F-

& 2SF30 S/N 3045G-)...............................................144

3" x 13" Single "V" Crown Press Wheel (2SF24 S/N 3236F+

& 2SF30 S/N 3046G+)..............................................142

3" x 14" Peaked Press Wheel..........................................152

3" x 14" Peaked Press Wheel (2SF24 S/N 3235F- & 2SF30

S/N 3045G-)..............................................................150

3" x 14" Peaked Press Wheel (2SF24 S/N 3236F+ & 2SF30

S/N 3046G+).............................................................148

4

4" x 12" Dual Rib Press Wheel........................................154

4" x 12" Heavy Duty Native Grass Press Wheel.............162

4" x 12" Smooth & Dual Rib Press Wheel.......................156

B

Box To Frame....................................................................22

C

Covering Chain...............................................................164

D

Decal Placement.............................................................182

Double Disk Opener (Standard 1991-1993)......................92

Dual Marker Hydraulics...................................................202

Dual Marker-Double Acting Hydraulics...........................206

Dual Marker-Single Acting Hydraulics.............................204

E

Electric Clutch Assembly (Option).....................................74

F

Feeder Cup Channel Assembly........................................40

Fertilizer Box Assembly.....................................................32

Fertilizer Drive...................................................................78

Fertilizer Hose Retainer..................................................118

Fertilizer Slow Moving Vehicle Assembly..........................34

Fertilizer Tray Assembly....................................................60

Flat Fold Marker Assembly..............................................184

Fold Hydraulics................................................................168

G

Gauge Wheel Drive...........................................................68

Gauge Wheel Track Removers........................................222

H

Heavy Duty Native Grass Opener Assembly....................96

Hydraulic Cylinder (810-147C)........................................176

Hydraulic Cylinder (810-148C)........................................178

Hydraulic Rod Cylinder (810-020C)................................170

J

Jack Shaft Drive................................................................72

L

Ladder Assembly..............................................................26

Lid & Step..........................................................................24

Lights LED (2SF24 S/N 3493F+) (2SF30 S/N 3476G+)....38

Lion Hydraulic Cylinder (810-018C & 810-022C)............172

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel

116-283A)...................................................................54

M

Mainframe & Slide Assembly............................................16

Marker Cross Hydraulic Cylinder (810-118C).................210

Marker Cylinder (810-005C)............................................214

Marker Disk (113-305K)..................................................194

Marker Disk (113-364S)..................................................192

Marker Disk (113-563S)..................................................190

Marker Double Selector Valve (810-023C)......................218

Marker Midway Hydraulic Cylinder (810-019C)...............212

Marker Midway Hydraulic Cylinder (810-118C)...............208

Marker Selector Sequence Valve (810-085C).................216

Marker Sequence Valve (810-006C)...............................220

Midway Hydraulic Cylinder (810-018C & 810-022C).......174

N

Native Grass Box, Lid & Step Assembly...........................36

Native Grass Drive............................................................80

Native Grass Feed Cup Assembly....................................66

Native Grass Lower Drive & Chain Guard.........................86

Native Grass Upper Drive & Chain Guard.........................84

Nede Shaft Monitor (Option).............................................52

O

Option 00 Straight Arm Opener (1994+)...........................88

P

Pilot Operated Check Valve (810-086C).........................180

Pivot Post..........................................................................18

155-015P - 4 - 11/05/13

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

R

Rotating Square Hammerblow Jack (890-610C)..........10

Rotating Square Jack (116-065K)................................14

S

Seed Lok (122-193K And 122-194K) (Option)...........108

Single Marker Hydraulics...........................................196

Single Marker-Double Acting Hydraulics....................200

Single Marker-Single Acting Hydraulics.....................198

Small Seeds Box Assembly.........................................28

Small Seeds Box Mounting Assembly..........................30

Small Seeds Drive........................................................76

Small Seeds Hose Channel Mounting.......................116

Small Seeds Hose Retainer (Part 1)..........................110

Small Seeds Hose Retainer (Part 2)..........................112

Small Seeds Metering Assembly.................................56

Small Seeds Y-Tube Drop...........................................114

Square Tube Butler Jack (890-610C)...........................12

Standard Fertilizer Double Disk Opener Assembly.....104

Standard Marker........................................................188

Standard Native Grass Opener Assembly.................100

T

Tongue & Pull Bar..........................................................8

Transport Hydraulics..................................................166

Transport Wheel...........................................................20

V

V-Bottom Feeder Cup Tray Divider (Option).................48

Vansco Shaft Monitor (Option).....................................50

11/05/13 - 5 - 155-015P

Table of Contents Part Number Index

155-015P - 6 - 11/05/13

Table of Contents Part Number Index

11/05/13 - 7 - 155-015P

Table of Contents Part Number Index

Tongue & Pull Bar

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10243

155-015P - 8 - 11/05/13

Table of Contents Part Number Index

Tongue & Pull Bar

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10243
30' TONGUEWELDMENT154-002H1.
RPBY 154-002H154-001H1.
NUT HEX JAM 3/4-10 PLT803-048C2.
HHCS 3/4-10X4 GR5 FTHD802-067C3.
SLIDE WELDMENT157-001H4.
PIN HITCH 1 X 6 W/HAIRPIN805-033C5.
HHCS 1/2-13X5 1/2 GR5802-046C6.
NUT LOCK 1/2-13 PLT803-019C7.
HHCS 1 1/4-7X9 1/2 GR5 SPTHD802-166C8.
WASHER LOCK 1 1/4 SPRING PLT804-030C9.
NUT HEX 1 1/4-7 PLT803-034C10.
HHCS 1-8X3 1/2 GR5802-169C11.
SQ TB JACK 10000 LB 10 STROKE890-610C12.

RPBY 890-610C116-065K12.

PIN HITCH 3/4 X 4 3/8805-081C13.
PULL BAR ASSEMBLY111-001H14.
NUT HEX JAM 1 1/4-7 PLT803-032C15.
ADJ. CLEVIS ASSEMBLY111-002H16.
PIN CLEVIS 1 X 2 3/4 USABLE LG805-004C17.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C18.
TRANSPORT STABILIZER FRAME RH157-003H19.
TRANSPORT STABILIZER FRAME LH157-002H19.
U-BOLT 5/8-11 X 3 17/32 X 5806-006C20.
WASHER LOCK SPRING 5/8 PLT804-022C21.
NUT HEX 5/8-11 PLT803-021C22.
HHCS 1-8X2 1/2 GR5802-096C23.
WASHER LOCK SPRING 1 PLT804-027C24.
NUT HEX 1-8 PLT803-031C25.
SINGLE HITCH STRAP-SMALL170-034H26.
LOWER HITCH170-040H27.
SAFETY CHAIN 20000 LB890-183C28.
SAFETY CHAIN WASHER194-070D29.
HHCS 1 1/4-7X11 GR5 SPTHD802-317C30.
RPBY 196-136H170-058H31.
SINGLE HITCH STRAP-LARGE170-033H32.
LARGE DIAMETER HITCH PACKAGE170-038A32.
SMALL DIA STRAP HITCH PKG170-059A32.
SMALL DIAMETER CLEVIS HITCH PK170-039A32.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

(2SF24 S/N 3260F+; 2SF30 S/N

3069G+) Referto "Square Tube
Butler Jack(890-610C) for
breakdown.

Obsolete replaced by 890-610C

(2SF24 S/N 3259F-; 2SF30
S/N3068G-) Referto "Rotating
Square Jack(116-065K)" for
breakdown.

11/05/13 - 9 - 155-015P

Table of Contents Part Number Index

Rotating Square Hammerblow Jack (890-610C)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

20213

155-015P - 10 - 11/05/13

Table of Contents Part Number Index

Rotating Square Hammerblow Jack (890-610C)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg20213
HB VIKING COVER0178021.
HB COVER SCREW0178062.
HB BEVEL GEAR0200233.
HB GROOVE PIN .25 X 1.50090624.
HB WEAR PLATE0160535.
HB THRUSTBEARING0010156.
HB BEARING SEAT0160487.
HB SCREW & NUT ASSY7122058.
HHCS 3/8-16X2 1/2 GR5802-114C9.
WASHER FLAT 3/8825-002C10.
NUT LOCK 3/8-16 PLT803-013C11.
HB CRANK, NARROW CLEVIS70114012.
REP BY 182531640069X13.
HB CROSS SHAFT00612514.
REP BY 701438701029X15.
HB BEARING SLEEVE01701216.
HB BULLDOG 12000LB LABEL01579617.
HB BEVEL GEAR PINION02002218.
HB RETAINING PIN00905219.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 11 - 155-015P

Table of Contents Part Number Index

Square Tube Butler Jack (890-610C)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

13324

155-015P - 12 - 11/05/13

Table of Contents Part Number Index

Square Tube Butler Jack (890-610C)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg13324
BUTLER GRIP CLIP10-800541.
BUTLER PVC GRIP2H-300812.
BUTLER CRANK ASSEMBLY2H-300803.
BUTLER GROOVE PIN10-801474.
BUTLER GEAR BOX2H-200GP5.
BUTLER BUSHING10-700206.
BUTLER PINION GEAR10-500587.
BUTLER THRUST BEARING10-800128.
WOODRUFF KEY #606800-046C9.
BUTLER BEVEL GEAR10-5005710.
7/8-14 LOCKNUT PLATED.10-8002811.
SCR P.H. 8X3/8 TYPEB THD FORM801-052C12.
RPBY 10-2050120-2002813.
OBSOLETE BUTLER INNER LEG ASBY2H-300GP14.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 13 - 155-015P

Table of Contents Part Number Index

Rotating Square Jack (116-065K)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10510

155-015P - 14 - 11/05/13

Table of Contents Part Number Index

Rotating Square Jack (116-065K)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10510
JACK LID116-069D1.
ROTATING JACK HOUSING116-061H2.
ROTATING JACK CRANK HANDLE116-042H3.
JACK CRANK HAND GRIP116-068D4.
EXTERNAL E RING 3/4 I.D.800-042C5.
BEVEL GEAR 30T 7 PITCH 63.4 PA116-064D6.
WOODRUFF KEY #606800-046C7.
SNAP RING EXT .750 .078 T800-015C8.
BEVEL GEAR 15T 7 PITCH 26.6 PA116-065D9.
JACK CRANK BUSHING116-066D10.
JACK LEG WITH FOOT116-037H11.
JACK SCREW WITH STOP116-038H12.
JACK NUT116-055D13.
BRG THST .75IDX1.65ODX.54T BND822-055C14.
JACK NUT PIN116-062D15.
SCR P.H. 8X3/8 TYPEB THD FORM801-052C16.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 15 - 155-015P

Table of Contents Part Number Index

Mainframe & Slide Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11281

155-015P - 16 - 11/05/13

Table of Contents Part Number Index

Mainframe & Slide Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg
SLIDE CYLINDER MOUNT156-017H1.
NUT HEX 1-8 PLT803-031C2.
WASHER LOCK SPRING 1 PLT804-027C3.
HHCS 1-8X6 1/2 GR5802-074C4.
HHCS 1-8X4 1/2 GR5802-098C5.

RPBY 156-030A156-018H6.
NUT SQ 1-8 PLT803-045C7.
FRONT SLIDE ROLLER156-047D8.
FRONT ROLLERSPACER156-048D9.

BUSHING SPINDLE 1 1/2X1 1/4X1890-011C11.
GREASE ZERK STRAIGHT 1/4-28800-001C12.
RPBY 156-029K156-003H13.
SEAL 3.375 X 2.0 X.438 CR20125816-012C14.
BEARING CONE 25590822-014C15.
BRG CUP 25520822-013C16.
BEARING CUP 25821822-015C17.
BEARING CONE 25877822-016C18.
WASHER SPINDLE - 7/8804-055C19.
NUT HEX SLOTTED 7/8-14 PLT803-029C20.
HUB CAP890-032C21.
PIN COTTER3/16 X 1 1/4 PLT805-016C22.
UPPER ROLLER MACHINED155-164D23.
WASHER LOCK SPRING 3/4 PLT804-023C24.
NUT HEX 3/4-10 PLT803-027C25.
HHCS 3/4-10X7 GR5802-095C26.
UPPER ROLLER SHAFT155-054D27.
NUT HEX SLOTTED 5/8-11 PLT GR5803-056C28.
FRONT SLIDE BLOCK BACK PLATE148-254D29.
FRONT SLIDE BLOCK817-438C30.
HHCS 1-8X2 1/2 GR5802-096C31.
FRAME WELDMENT155-002H32.
PIN HITCH 1 X 6 W/HAIRPIN805-033C33.
NUT HEX JAM 1 1/4-7 PLT803-032C34.
DEPTH ADJUSTMENT STUD155-165D35.
SLIDE BLOCK TIE BAR156-049D36.

SLIDE ROLLER156-045D38.
SLIDE ROLLER PIVOT BUSHING890-142C39.
ROLLER SHAFT156-046D40.
HHCS 3/8-16X2 GR5802-143C41.
NUT LOCK 3/8-16 PLT803-013C42.
NUT LOCK 5/8-11 PLT803-024C43.
15 FT CPH SLIDE BLOCK817-398C44.

FRONT SIDE BLOCK817-031C48.
NUT HEX CPLR 1 1/4-7 X 3803-044C49.
INNER AXLE SLIDE TUBE WELDMENT155-006H50.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

Shown.RPBY 156-031A156-019H6.

Includes items 11, 12, & 13.POST SPINDLE ASSEMBLY'99156-029K10.

Includes items 42 & 43.SLIDE ROLLER ASSEMBLY156-016V37.

1991-1993LOWER ROLLER WELDMENT155-004H45.
1991-1993LOWER ROLLER BUSHING155-027D46.
1991-1993LOWER ROLLER BOLT155-026D47.

11/05/13 - 17 - 155-015P

Table of Contents Part Number Index

Pivot Post

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11290

155-015P - 18 - 11/05/13

Table of Contents Part Number Index

Pivot Post

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11290
ROLLER SHAFT WELDMENT156-010H1.
BUSHING 2 1/4 OD X 2 ID X 2 LG890-051C2.
POST WELDMENT LH156-006H3.
POST WELDMENT RH156-005H3.
PIN CLEVIS 1 X 2 3/4 USABLE LG805-004C4.
FRAME ADJ LINK ASSEMBLY156-015S5.
ADJ LINK WELDMENT LH THD156-014E6.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C7.
FRAME ADJ LINK156-008E8.
NUT HEX JAM 1 1/4-7 PLT803-032C9.
ADJ LINK WELDMENT RH THD156-013E10.
U-BOLT 5/8-11 X 3 17/32 X 5806-006C11.
WASHER LOCK SPRING 5/8 PLT804-022C12.
NUT HEX 5/8-11 PLT803-021C13.

WASHER LOCK 1 1/4 SPRING PLT804-030C15.
NUT HEX 1 1/4-7 PLT803-034C16.
RING ROLLER SNAP800-014C17.
GREASE ZERK STRAIGHT 1/4-28800-001C18.
PIN HAIR COTTER .148 WIRE805-032C19.
PIVOTSPACER156-057D20.

Frame

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.POST PIVOT BOLT156-022H14.
1st rev.REPLACED BY 156-022H802-077C14.

11/05/13 - 19 - 155-015P

Table of Contents Part Number Index

Transport Wheel

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11289

155-015P - 20 - 11/05/13

Table of Contents Part Number Index

Transport Wheel

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11289
INNER AXLE SLIDE TUBE WELDMENT155-006H1.
HHCS 1/2-13X3 1/4 GR5802-099C2.
NUT LOCK 1/2-13 PLT803-019C3.

TIRE 9.5L X 15-12 PLY-TUBELESS814-009C6.

VALVE STEM TR415X.625X1 1/4 LG816-035C7.
WHEEL 8 X 15 X 6 BOLT814-008C8.

BOLT WHEEL 1/2-20X1 90-DEG802-104C9.
SPINDLE SGL 1.75X10.72815-085C10.

BRG CONE 1.50ID LM-29749822-018C12.
HUB 6 BOLT 4 5/8 PILOT W/ CUPS815-082C13.
BEARING CONE LM-67048822-021C14.
WASHER SPINDLE - 7/8804-055C15.
PIN COTTER3/16 X 1 1/4 PLT805-016C16.
HUB GREASE CAP200-001D17.
NUT HEX SLOTTED 7/8-14 PLT803-029C18.

Transport & Gauge Wheel

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.Includes items 11-15 & 18HUB AND SPINDLE ASSY 6 BOLT815-079C4.

Use existingstock; 1st rev.RPBY 815-079C102-002K4.
Includes items 7, 8 & 9TIRE/WHEEL ASSY 9.5LX15 12 PLY102-006K5.
Optional11L TRNSPT WL & TR ASSY OPTION155-013A5.

OptionalTIRE 11L-15SL 12 PLY TUBELESS814-031C6.

OptionalWHEEL 15 DIA X 10 WIDE X 6 BLT814-023C8.

Install with lip outSEAL 2.56X1.625X.438 CR16289816-011C11.

11/05/13 - 21 - 155-015P

Table of Contents Part Number Index

Box To Frame

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11107

155-015P - 22 - 11/05/13

Table of Contents Part Number Index

Box To Frame

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11107
12'-3PT BOX WELDMENT118-154H1.
15'-3PT BOX WELDMENT118-156H1.
24' 2-SECTION MAIN FRAME158-053H2.
30' 2-SECTION MAIN FRAME158-054H2.
HHCS 1/2-13X1 1/4 GR5802-034C3.
WASHER LOCK SPRING 1/2 PLT804-015C4.
NUT HEX 1/2-13 PLT803-020C5.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C6.
SIGHT GLASS GASKET816-013C7.
GRAIN LEVEL SIGHT GLASS817-007C8.
SCREW RD HD SLT10-24X1/2 PLT801-003C9.
WASHER INTERNAL STAR #10 PLT804-004C10.
NUT HEX 10-24 PLT803-001C11.
RPBY 816-001C118-155D12.
RPBY 816-004C118-157D13.
RPBY 816-004C118-156D13.
WASHER FLAT 1/2 SAE PLT804-016C14.
MANUAL PAK MOUNT118-652D15.
HHCS 1/4-20X1 GR5802-005C16.
NUT HEX 3/8-16 PLT803-014C17.
NUT HEX FLNG T-LOCK 1/4-20 YLW803-293C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
U-BOLT 3/8-16 X 3 17/32 X4 1/4806-045C20.
MINI END WHEEL PRESS WHEEL817-042C21.
MANUAL PAK 1'" W/ GASKET817-516C22.
DECAL GP PLANTING COMPONENTS838-482C23.
2SNG/2SF 24&30 SEEDRATE BOOK202-499B24.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 23 - 155-015P

Table of Contents Part Number Index

Lid & Step

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10083

155-015P - 24 - 11/05/13

Table of Contents Part Number Index

Lid & Step

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10083
12' BOX LID WELDMENT119-146H1.
14' BOX LID WELDMENT119-147H1.
RUBBER LID LATCH816-008C2.
HHCS 1/4-20X1 1/2 GR5802-167C3.
NUT-LOCK 1/4-20 PLT803-007C4.
PIN CLEVIS .491 X 2 49/64 USEL805-014C5.
PIN COTTER5/32 X 1 PLT805-019C6.
RPBY 119-224D119-001H7.
HHCS 5/16-18X3/4 GR5802-007C8.
NUT LOCK 5/16-18 PLT803-011C9.
SPRING LID HING EXT807-001C10.
LID HINGE STRAP SPACER110-016D11.
LID LATCH STRAP110-015D12.
WASHER LOCK SPRING 1/4 PLT804-006C13.
NUT-HEX 1/4-20 PLT803-006C14.
ANCHOR BRACKET890-015C15.
SCREW RD HD 5/16-18 X 1/2 PLT801-028C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.
NUT HEX 5/16-18 PLT803-008C18.
84 STEP119-106D19.
144 STEP119-129D19.
STEP ANGLE119-108D20.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C21.
WASHER LOCK SPRING 1/2 PLT804-015C22.
NUT HEX 1/2-13 PLT803-020C23.
3-PT STEP RETAINER119-032D24.
HHCS 3/8-16X1 1/4 GR5802-079C25.
WASHER LOCK SPRING 3/8 PLT804-013C26.
NUT HEX 3/8-16 PLT803-014C27.
HHCS 3/8-16X1 1/4 GR5802-079C28.
WASHER LOCK SPRING 3/8 PLT804-013C29.
NUT HEX 3/8-16 PLT803-014C30.
SCR HEX SELF TAP 1/4-20X1TYPEF801-151C31.
DUAL AG LIGHTS LH890-311C32.

DUAL AG LIGHTS RH890-312C32.

AG LIGHT WIRING HARNESS-28'890-313C33.

LIGHT HARNESS, 20' WISHBONE890-430C34.

CABLE TIE MOUNT800-148C35.
CABLE TIE .19X7.25 1.75D 50LB800-112C36.
2SEC LIGHT KIT155-026A37.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

(2SF24 S/N 3492F-) (2SF30 S/N

3475G-)

(2SF24 S/N 3492F-) (2SF30 S/N

3475G-)

(2SF24 S/N 3492F-) (2SF30 S/N

3475G-)

(2SF24 S/N 3492F-) (2SF30 S/N

3475G-)

11/05/13 - 25 - 155-015P

Table of Contents Part Number Index

Ladder Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

16957

155-015P - 26 - 11/05/13

Table of Contents Part Number Index

Ladder Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg16957
NUT HEX 5/16-18 PLT803-008C1.
WASHER LOCK SPRING 5/16 PLT804-009C2.
LADDER BRACEPLATE119-131D3.
NUT HEX 3/8-16 PLT803-014C4.
WASHER LOCK SPRING 3/8 PLT804-013C5.
3-PT STEP RETAINER119-032D6.
LADDER WELDMENT189-007H7.
NUT LOCK 1/2-13 PLT803-019C8.
DECAL AMBER REFLECTOR818-229C9.
HHCS 1/2-13X2 1/2 GR5802-130C10.
HHCS 5/16-18X1 1/2 GR5802-012C11.
WASHER FLAT 5/16 USS PLT804-010C12.
LADDER MOUNT WELDMENT119-179H13.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C14.
HHCS 3/8-16X1 1/4 GR5802-079C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
STEP MOUNTING BRACKET119-128D18.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 27 - 155-015P

Table of Contents Part Number Index

Small Seeds Box Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

16207

155-015P - 28 - 11/05/13

Table of Contents Part Number Index

Small Seeds Box Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg16207
6-96 GRASS SEED BOX RH123-059H1.
6-96 GRASS SEED BOX LH123-060H1.
6-81 GRASS SEED BOX RH123-061H1.
6-81 GRASS SEED BOX LH123-062H1.
10-96 GRASS SEED BOX LH123-076H1.
10-96 GRASS SEED BOX RH123-077H1.
12-59 GRASS SEED BOX RH123-078H1.
12-59 GRASS SEED BOX LH123-079H1.
10-59 GRASS SEED BOX RH123-080H1.
10-59 GRASS SEED BOX LH123-081H1.
7 1/2-59 GRASS SEED BOX RH123-082H1.
7 1/2-59 GRASS SEED BOX LH123-083H1.
7-59 GRASS SEED BOX RH123-084H1.
7-59 GRASS SEED BOX LH123-085H1.
6-59 GRASS SEED BOX RH123-086H1.
6-59 GRASS SEED BOX LH123-087H1.
7-96 GRASS SEED BOX LH123-088H1.
7-96 GRASS SEED BOX RH123-089H1.
7 1/2-96 GRASS SEED BOX LH123-090H1.
7 1/2-96 GRASS SEED BOX RH123-091H1.
8-96 GRASS SEED BOX LH123-092H1.
8-96 GRASS SEED BOX RH123-093H1.
12-96 GRASS SEED BOX LH123-094H1.
12-96 GRASS SEED BOX RH123-095H1.
7-81 GRASS SEED BOX RH123-096H1.
7-81 GRASS SEED BOX LH123-097H1.
7 1/2-81 GRASS SEED BOX RH123-098H1.
7 1/2-81 GRASS SEED BOX LH123-099H1.
8-81 GRASS SEED BOX RH123-100H1.
8-81 GRASS SEED BOX LH123-101H1.
10-81 GRASS SEED BOX RH123-102H1.
10-81 GRASS SEED BOX LH123-103H1.
12-81 GRASS SEED BOX RH123-105H1.
12-81 GRASS SEED BOX LH123-106H1.
NUT HEX 6-32 SS803-065C2.
WASHER LOCK #6 SS804-050C3.
LATCH FERTTRAY DOOR800-030C4.
SCREW PAN HD 6-32 X 1/2 SS801-017C5.
HHCS 1/4-20X5/8 GR5802-078C6.
SEED ADJUSTMENT SUPPORT123-118D7.
SPRING EXT LID LATCH807-018C8.
LID LOCK BAR123-125D9.
NUT LOCK 1/4-20 PLT803-007C10.
U-BOLT 1/4-20 X 15/16 X 1 PLT806-025C11.
NUT HEX 1/4-20 PLT803-006C12.
96 INCH SEED BOX LID WELDMENT123-063H13.
59 SEED BOX LID WELDMENT123-121H13.
81 BOX LID WELDM'T123-350H13.
PARTITION SMALL SEED BOX123-310D14.
SEED BOX SPROCKET CAP123-051D15.
WASHER FLAT #10 SAE PLT804-046C16.
WASHER INTERNAL STAR #10 PLT804-004C17.
NUT HEX 10-24 PLT803-001C18.
SCREW RD HD SLT10-24X1/2 PLT801-003C19.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 29 - 155-015P

Table of Contents Part Number Index

Small Seeds Box Mounting Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11434

155-015P - 30 - 11/05/13

Table of Contents Part Number Index

Small Seeds Box Mounting Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11434
2-SEC GRASS BOX MOUNT BRACKET123-291H1.
HHCS 5/16-18X1 GR5802-159C2.
2 SECTION MOUNT BRACKET BRACE123-291D3.
NUT HEX 5/16-18 PLT803-008C4.
WASHER LOCK SPRING 5/16 PLT804-009C5.
WASHER FLAT 5/16 USS PLT804-010C6.
U-BOLT 5/8-11 X 3 17/32 X 5806-006C7.
WASHER LOCK SPRING 5/8 PLT804-022C8.
NUT HEX 5/8-11 PLT803-021C9.
HHCS 3/8-16X1 GR5802-017C10.
WASHER FLAT 3/8 SAE PLT804-012C11.
2-SEC BRACEMOUNT123-317H12.
24 2 SEC CENTER GRASS BOX MNT123-292H13.
30 2 SEC CENTER GRASS BOX MNT123-293H13.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 31 - 155-015P

Table of Contents Part Number Index

Fertilizer Box Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10659

155-015P - 32 - 11/05/13

Table of Contents Part Number Index

Fertilizer Box Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10659
12' FERTILIZERBOX WELDMENT142-041H1.
15' FERTILIZERBOX WELDMENT142-042H1.
12' BOX LID WELDMENT119-146H2.
14' BOX LID WELDMENT119-147H2.
FERTILIZER STEP HANGER119-132H3.
144 STEP119-129D4.
84 STEP119-106D4.
3-PT STEP RETAINER119-032D5.
HHCS 3/8-16X1 1/4 GR5802-079C6.
WASHER LOCK SPRING 3/8 PLT804-013C7.
NUT HEX 3/8-16 PLT803-014C8.
NAME PLATE ADJ. GUIDE SHORT819-005C9.
SCREW RD HD 8-32 X 3/8 BRASS801-001C10.
WASHER FLAT #8 BRASS804-003C11.
WASHER INTERNAL STAR #8 BRASS804-002C12.
NUT HEX 8-32 BRASS803-035C13.
PIN COTTER5/32 X 1 PLT805-019C14.
ANCHOR BRACKET890-015C15.
SCREW RD HD 5/16-18 X 1/2 PLT801-028C16.
NUT HEX 5/16-18 PLT803-008C17.
WASHER LOCK SPRING 5/16 PLT804-009C18.
LID LATCH STRAP110-015D19.
HHCS 1/4-20X1 1/2 GR5802-167C20.
LID HINGE STRAP SPACER110-016D21.
NUT-HEX 1/4-20 PLT803-006C22.
WASHER LOCK SPRING 1/4 PLT804-006C23.
RPBY 119-224D119-001H24.
SPRING LID HING EXT807-001C25.
HHCS 5/16-18X3/4 GR5802-007C26.
NUT LOCK 5/16-18 PLT803-011C27.
PIN CLEVIS .491 X 2 49/64 USEL805-014C28.
RUBBER LID LATCH816-008C29.
NUT-LOCK 1/4-20 PLT803-007C30.
VINYL SEAL 3/8 X 5/8/FT816-001C31.
VINYL SEAL 3/8 X 1/2 (PER FT)816-004C32.
BOX MOUNTING HOLE SUPPORT142-035D33.
PARTITION SUPPORT142-036D34.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 33 - 155-015P

Table of Contents Part Number Index

Fertilizer Slow Moving Vehicle Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10395

155-015P - 34 - 11/05/13

Table of Contents Part Number Index

Fertilizer Slow Moving Vehicle Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10395
DECAL SLOWMOVING-GALV. BACKED818-055C1.
SMV MOUNTING BLADE890-153C2.
HHCS 1/4-20X3/4 GR5802-004C3.
WASHER FLAT 1/4 SAE PLT804-007C4.
SCREW RD HD 1/4-20 X 5/8801-018C5.
NUT-HEX 1/4-20 PLT803-006C6.
WASHER LOCK SPRING 1/4 PLT804-006C7.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 35 - 155-015P

Table of Contents Part Number Index

Native Grass Box, Lid & Step Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11423

155-015P - 36 - 11/05/13

Table of Contents Part Number Index

Native Grass Box, Lid & Step Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11423
12'-12 GRASS BOX WELDMENT202-010H1.
12'-10 GRASS BOX WELDMENT202-011H1.
12'-8 GRASS BOX WELDMENT202-012H1.
12'-7 1/2 GRASS BOX WELDMENT202-013H1.
12'-7 GRASS BOX WELDMENT202-014H1.
12'-6 GRASS BOX WELDMENT202-015H1.
15'-12 GRASS BPX WELDMENT202-016H1.
15'-10 GRASS BOX WELDMENT202-017H1.
15'-8 GRASS BOX WELDMENT202-018H1.
15'-7 1/2 GRASS BOX WELDMENT202-019H1.
15'-7 GRASS BOX WELDMENT202-020H1.
15'-6 GRASS BOX WELDMENT202-021H1.
12' BOX LID WELDMENT119-146H2.
14' BOX LID WELDMENT119-147H2.
BOX MOUNT SPACER202-031D3.
BOX MOUNT SPACER - L0NG202-103D3.
MOUNTING BACK-UPPLATE202-032D4.
HHCS 1/2-13X3/4 GR5802-032C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
NUT HEX 3/8-16 PLT803-014C7.
PIN CLEVIS .491 X 2 49/64 USEL805-014C8.
RPBY 119-224D119-001H9.
SPRING LID HING EXT807-001C10.
HHCS 5/16-18X3/4 GR5802-007C11.
NUT LOCK 5/16-18 PLT803-011C12.
HHCS 1/4-20X1 1/2 GR5802-167C13.
LID HINGE STRAP SPACER110-016D14.
LID LATCH STRAP110-015D15.
WASHER LOCK SPRING 1/4 PLT804-006C16.
NUT-HEX 1/4-20 PLT803-006C17.
VINYL SEAL 3/8 X 1/2 (PER FT)816-004C18.
VINYL SEAL 3/8 X 5/8/FT816-001C19.
RUBBER LID LATCH816-008C20.
ANCHOR BRACKET890-015C21.
SCREW RD HD 5/16-18 X 1/2 PLT801-028C22.
WASHER LOCK SPRING 5/16 PLT804-009C23.
NUT HEX 5/16-18 PLT803-008C24.
STEP SUPPORT- GRASS119-153H25.
NUT-LOCK 1/4-20 PLT803-007C26.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C27.
WASHER LOCK SPRING 1/2 PLT804-015C28.
NUT HEX 1/2-13 PLT803-020C29.
84 STEP119-106D30.
STEP 120119-014D30.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C31.
PIN COTTER5/32 X 1 PLT805-019C32.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 37 - 155-015P

Table of Contents Part Number Index

Lights LED (2SF24 S/N 3493F+) (2SF30 S/N 3476G+)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

36085

155-015P - 38 - 11/05/13

Table of Contents Part Number Index

Lights LED (2SF24 S/N 3493F+) (2SF30 S/N 3476G+)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg36085
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C1.
WASHER LOCK SPRING 1/2 PLT804-015C2.
NUT HEX 1/2-13 PLT803-020C3.
HHCS 3/8-16X1 1/4 GR5802-079C4.
3-PT STEP RETAINER119-032D5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
NUT HEX 3/8-16 PLT803-014C7.
84 STEP119-106D8.
LIGHT HRNSS ENHANCE MODULE LED833-694C9.
LIGHT MOUNTING BRACKET155-065D10.
LIGHT, RED LAMP - LED833-696C11.
LIGHT, AMBER LAMP LED833-697C12.
SCREW HEX SELF TAP 1/4-20X3/4801-081C13.
LIGHT HARNESS 20' WISHBONE LED833-685C14.
AG LGHT WIRING HARNESS-28' LED833-679C15.
CABLE TIE MOUNT800-148C16.
CABLE TIE .19X7.25 1.75D 50LB800-112C17.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 39 - 155-015P

Table of Contents Part Number Index

Feeder Cup Channel Assembly

(Applies to 2SF24 (1986+) only)

10220

155-015P - 40 - 11/05/13

Table of Contents Part Number Index

Feeder Cup Channel Assembly

(Applies to 2SF24 (1986+) only)

Image No.dwg10220
SEED RATE ADJ HANDLE FRONT120-161H1.
ADJUSTMENT HANDLE PIVOT109-069D2.
WASHER FLAT 5/8 USS PLT804-019C3.
PIN COTTER3/16 X 1 1/4 PLT805-016C4.
HHCS 3/8-16X3/4 GR5802-014C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
WASHER FLAT 3/8 SAE PLT804-012C7.
WASHER ADJ HANDLE BRG804-001C8.
BRG BALL 17IDX40OD 6203822-008C9.
SNAP RING EXT 17 MM800-003C10.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H11.
NUT WING 1/2-13 PLT803-016C12.
SEED RATE GAUGE MOUNT120-171D13.
NAME PLATE ADJ. GUIDE SHORT819-005C14.
SCREW RD HD 8-32 X 3/8 BRASS801-001C15.
WASHER FLAT #8 BRASS804-003C16.
WASHER INTERNAL STAR #8 BRASS804-002C17.
NUT HEX 8-32 BRASS803-035C18.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
39T SPROCKET & HUB ASSEMBLY109-002H22.
BRG BALL 30IDX62OD 206822-006C23.
RING FC HOUSING800-005C24.
FEEDER CUP BRG HOUSING109-039D25.
GREASE ZERK STRAIGHT 1/4-28800-001C26.
SNAP RING EXT BASIC 1 3/16800-004C27.

PIN ROLL 3/16X1 1/4 PLT805-023C30.
HHCS 1/2-13X3/4 GR5802-032C31.
PIN ROLL .182 X 1 5/32 FDR CUP805-070C32.
RPBY 890-121C817-002C33.
POWDER METAL SPROCKET D2861B890-121C33.

HHCS 1/4-20X3/4 GR5802-004C35.
DELRIN SLEEVE817-003C36.
WASHER RETAINING804-031C37.
HFSS 1/4-20X5/8 GR5802-196C38.
12'-6 LH FEEDER CUP SHAFT120-103D39.
12'-6 RH FEEDER CUP SHAFT120-109D39.
12'-7 LH FEEDER CUP SHAFT120-104D39.
12'-7 RH FEEDER CUP SHAFT120-110D39.
12'-7 1/2 LH FEEDER CUP SHAFT120-105D39.
12'-7 1/2 RH FEEDER CUP SHAFT120-111D39.
12'-8 LH FEEDER CUP SHAFT120-106D39.
12'-8 RH FEEDER CUP SHAFT120-112D39.
12'-10 LH FEEDER CUP SHAFT120-107D39.
12'-10 RH FEEDER CUP SHAFT120-113D39.
12' LH 6 FEEDER CUP CHANNEL118-121D40.
12' RH 6 FEEDER CUP CHANNEL118-127D40.
12' LH 7 FEEDER CUP CHANNEL118-122D40.
12' RH 7 FEEDER CUP CHANNEL118-128D40.
12' LH 7 1/2 FEEDER CUP CHNL118-123D40.
12' RH 7 1/2 FEEDER CUP CHNL118-129D40.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 23, 24, & 25 thru28GRAIN 39T SPRKT HUB & BRG ASSY109-003S28.

2nd rev.MACHINED ADJUSTMENT SPOOL109-091D29.

Use existingstock; 1st rev.RPBY 109-091D109-013H29.

2nd rev.SEED CUP ASSEMBLY-1 1/4817-094C34.

Use existingstock; 1st rev.RPBY 817-094C817-016C34.

11/05/13 - 41 - 155-015P

Table of Contents Part Number Index

Feeder Cup Channel Assembly (continued)

(Applies to 2SF24 (1986+) only)

12' LH 8 FEEDER CUP CHANNEL118-124D40.
12' RH 8 FEEDER CUP CHANNEL118-130D40.
12' LH 10 FEEDER CUP CHANNEL118-125D40.
12' RH 10 FEEDER CUP CHANNEL118-131D40.
12' RH 10 FEEDER CUP CHANNEL118-131D40.
NUT HEX LOCK 1/4-20 FLG803-088C41.

FEEDER CUP DIVIDER CLIP118-331D43.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C44.
NYLON WASHER-SPLIT817-004C45.
SEED CUP WASHER RETAINER817-073C46.
SEED CUP LEFT HALF817-096C47.
SEED CUP DOOR817-095C48.
SEED CUP RIGHT HALF817-097C49.
SEED CUP ADJUSTMENT HANDLE817-071C50.

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.1 1/4 WIDE FEEDER CUP PLUG817-200C42.
Use existingstock; 1st rev.RPBY 817-200C109-009H42.

155-015P - 42 - 11/05/13

Table of Contents Part Number Index

Feeder Cup Channel Assembly (continued)

(Applies to 2SF24 (1986+) only)

This Page Intentionally Left Blank

Metering System

11/05/13 - 43 - 155-015P

Table of Contents Part Number Index

Feeder Cup Channel Assembly

(Applies to 2SF30 (1986+) only)

10220

155-015P - 44 - 11/05/13

Table of Contents Part Number Index

Feeder Cup Channel Assembly

(Applies to 2SF30 (1986+) only)

Image No.dwg10220
SEED RATE ADJ HANDLE FRONT120-161H1.
ADJUSTMENT HANDLE PIVOT109-069D2.
WASHER FLAT 5/8 USS PLT804-019C3.
PIN COTTER3/16 X 1 1/4 PLT805-016C4.
HHCS 3/8-16X3/4 GR5802-014C5.
WASHER LOCK SPRING 3/8 PLT804-013C6.
WASHER FLAT 3/8 SAE PLT804-012C7.
WASHER ADJ HANDLE BRG804-001C8.
BRG BALL 17IDX40OD 6203822-008C9.
SNAP RING EXT 17 MM800-003C10.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H11.
NUT WING 1/2-13 PLT803-016C12.
SEED RATE GAUGE MOUNT120-171D13.
NAME PLATE ADJ. GUIDE SHORT819-005C14.
SCREW RD HD 8-32 X 3/8 BRASS801-001C15.
WASHER FLAT #8 BRASS804-003C16.
WASHER INTERNAL STAR #8 BRASS804-002C17.
NUT HEX 8-32 BRASS803-035C18.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
39T SPROCKET & HUB ASSEMBLY109-002H22.
BRG BALL 30IDX62OD 206822-006C23.
RING FC HOUSING800-005C24.
FEEDER CUP BRG HOUSING109-039D25.
GREASE ZERK STRAIGHT 1/4-28800-001C26.
SNAP RING EXT BASIC 1 3/16800-004C27.

PIN ROLL 3/16X1 1/4 PLT805-023C30.
HHCS 1/2-13X3/4 GR5802-032C31.
PIN ROLL .182 X 1 5/32 FDR CUP805-070C32.
RPBY 890-121C817-002C33.
POWDER METAL SPROCKET D2861B890-121C33.

HHCS 1/4-20X3/4 GR5802-004C35.
DELRIN SLEEVE817-003C36.
WASHER RETAINING804-031C37.
HFSS 1/4-20X5/8 GR5802-196C38.
15'-6 LH FEEDER CUP SHAFT120-170D39.
15'-6 RH FEEDER CUP SHAFT120-169D39.
15'-7LH FEEDER CUP SHAFT120-101D39.
15'-7 RH FEEDER CUP SHAFT120-120D39.
15'-7 1/2 LH FEEDER CUP SHAFT120-115D39.
15'-7 1/2 RH FEEDER CHP SHAFT120-121D39.
15'-8 LH FEEDER CUP SHAFT120-116D39.
15'-8 RH FEEDER CUP SHAFT120-122D39.
15'-10 LH FEEDER CUP SHAFT120-117D39.
15'-10 RH FEEDER CUP SHAFT120-123D39.
15' LH 6 FEEDER CUP CHANNEL118-268D40.
15' RH 6 FEEDER CUP CHANNEL118-274D40.
15' LH 7 FEEDER CUP CHANNEL118-267D40.
15' RH 7 FEEDER CUP CHANNEL118-273D40.
15' LH 7 1/2 FEEDER CUP CHNL118-266D40.
15' RH 7 1/2 FEEDER CUP CHNL118-272D40.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 23, 24, & 25 thru28GRAIN 39T SPRKT HUB & BRG ASSY109-003S28.

2nd rev.MACHINED ADJUSTMENT SPOOL109-091D29.

Use existingstock; 1st rev.RPBY 109-091D109-013H29.

2nd rev.SEED CUP ASSEMBLY-1 1/4817-094C34.

Use existingstock; 1st rev.RPBY 817-094C817-016C34.

11/05/13 - 45 - 155-015P

Table of Contents Part Number Index

Feeder Cup Channel Assembly (continued)

(Applies to 2SF30 (1986+) only)

15' LH 8 FEEDER CUP CHANNEL118-265D40.
15' RH 8 FEEDER CUP CHANNEL118-271D40.
15' LH 10 FEEDER CUP CHANNEL118-264D40.
15' RH 10 FEEDER CUP CHANNEL118-270D40.
NUT HEX LOCK 1/4-20 FLG803-088C41.

FEEDER CUP DIVIDER CLIP118-331D43.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C44.
NYLON WASHER-SPLIT817-004C45.
SEED CUP WASHER RETAINER817-073C46.
SEED CUP LEFT HALF817-096C47.
SEED CUP DOOR817-095C48.
SEED CUP RIGHT HALF817-097C49.
SEED CUP ADJUSTMENT HANDLE817-071C50.

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.1 1/4 WIDE FEEDER CUP PLUG817-200C42.
Use existingstock; 1st rev.RPBY 817-200C109-009H42.

155-015P - 46 - 11/05/13

Table of Contents Part Number Index

Feeder Cup Channel Assembly (continued)

(Applies to 2SF30 (1986+) only)

This Page Intentionally Left Blank

Metering System

11/05/13 - 47 - 155-015P

Table of Contents Part Number Index

V-Bottom Feeder Cup Tray Divider (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11371

155-015P - 48 - 11/05/13

Table of Contents Part Number Index

V-Bottom Feeder Cup Tray Divider (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11371
HHCS 1/4-20X3/4 GR5802-004C1.
FEEDER CUP DIVIDER CLIP118-331D2.
FEEDER CUP DIVIDER 6' S.S. BOX118-325D3.
FEEDER CUP DIVIDER 7' S.S. BOX118-326D3.
FEEDER CUP DIVIDER 7.5 SS BOX118-327D3.
FEEDER CUP DIVIDER 8 S.S. BOX118-328D3.
FEEDER CUP DIVIDER 10 S.S. BOX118-329D3.
NUT HEX LOCK 1/4-20 FLG803-088C4.

Not shown.SILICON 35YR CLEAR 10 OZ890-179C4.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 49 - 155-015P

Table of Contents Part Number Index

Vansco Shaft Monitor (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

16769

155-015P - 50 - 11/05/13

Table of Contents Part Number Index

Vansco Shaft Monitor (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg16769
VANSCO2 CHANNEL SHAFT MONITOR823-059C1.
VANSCO3 CHANNEL SHAFT MONITOR823-060C1.
VANSCO2 CHNL SHAFT MNTR-2SNT823-076C1.
VANSCOCONTROL BOX ASSY 2 CH2530012.
VANSCOCONTROL BOX ASSY 3CH2530002.
VANSCOHARNESS 2 CH 40FT2537013.
VANSCOHARNESS 3 CH 60FT2537003.

WASHER FLAT #8 PLT804-088C5.
WASHER LOCK #8804-043C6.
NUT HEX 8-32803-064C7.

SCREW RD HD 8-32 X 1 1/2LG PLT801-067C9.
SCREW RD HD 8-32 X 1/2 LG PLT801-016C10.

VANSCOMAGNET890-321C12.
CABLE TIE .19X7.25 1.75D 50LB800-112C13.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.REED SWITCH PICK-UPVA-0800024.

Use existingstock; 1st rev.REPLACED BY VA-0800020800024.

2nd rev.VANSCOSWITCH BRACKET116-181D8.

Use existingstock; 1st rev.RPBY 116-181D116-169D8.

2nd rev.VANSCOMAGNET & CABLE TIE ASSY116-132K11.

Use existingstock; 1st rev.RPBY 116-132K116-119K11.

Service part for 823-060C.MOUNTING BRACKETVA-VMM25350114.
Service part for 823-060C.VANSCOMOUNTING KNOB KITVA-25330715.
Service part for 823-060C.BRYLITE CONSOLE ENDVA-JX-B7716.
Service part for 823-060C.BRYLITE HARNESS ENDVA-JX-B7617.

11/05/13 - 51 - 155-015P

Table of Contents Part Number Index

Nede Shaft Monitor (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

16975

155-015P - 52 - 11/05/13

Table of Contents Part Number Index

Nede Shaft Monitor (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg16975
SHAFT MONITORMOUNTING PLATE823-034C1.
SHAFT MONITORSENSOR SWITCH823-035C2.
RPBY 167-014V823-036C3.
HHCS 1/4-20X3/4 GR5802-004C4.
WASHER LOCK SPRING 1/4 PLT804-006C5.
NUT-HEX 1/4-20 PLT803-006C6.
RIVET POP 3/32 .125 AD32BS800-056C7.
2-CHANNEL CONTROL BOX823-048C8.
4 PIN FEMALE DISCONNECT823-047C9.
4 PIN MALE DISCONNECT823-046C10.
2CH. WIRING HARNESS823-044C11.
WASHER FLAT 1/4 USS PLT804-075C12.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 1, 4 thru 7 & 12.OBSOLETE SHAFT MONITOR HDWARE823-037C12.

11/05/13 - 53 - 155-015P

Table of Contents Part Number Index

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

34220

155-015P - 54 - 11/05/13

Table of Contents Part Number Index

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg34220
HFSS 1/4-20X3/4 GR5802-257C1.
HOSE CLIP 5/8 I.D.800-052C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
CABLE TIE, NYLON7700264.
MAGNET, ADHESIVE BACKED, LARGE5400175.
NUT HEX JAM, PLASTIC M16 X 27104256.
SHAFT SENSOR MOUNT116-019D7.
SCR SELF TAP #10 X 3/4801-199C8.
LOUP SHAFT SENSOR 2&3 CHANNEL2531009.
SMALL CUP SENSOR MOUNT116-020D10.
LOUP 3 CHANNEL SHAFT MONITOR25301711.
LOUP 2 CHANNEL SHAFT MONITOR25301612.
SHAFT MONITOREXT. 30' 6P WP833-595C13.
HARNESS 3 SHAFT MONITOR LOUP31895114.
LOUP 3 CHANNEL SHAFT MONITOR25301715.
SHAFT MONITOREXT. 25' 4P WP833-596C16.
HARNESS 2 SHAFT MONITOR LOUP31891717.

Metering System

11/05/13 - 55 - 155-015P

Table of Contents Part Number Index

Small Seeds Metering Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11432

155-015P - 56 - 11/05/13

Table of Contents Part Number Index

Small Seeds Metering Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11432
HHCS 1/4-20X5/8 GR5802-078C1.
NUT-HEX 1/4-20 PLT803-006C2.
SEED BOX SPROCKET CAP123-051D3.
WASHER GRASS SEEDER CUP SHAFT804-042C4.
GRASS SEEDER SLEEVE817-009C5.
PIN COTTER1/8 X 3/4805-067C6.
GRASS SEEDER SPROCKET817-010C7.
SML SEED FEEDER CUP ASSY817-504C8.

RPBY 817-504C817-008C8.

SNAP RING .875800-028C9.
WASHER FLAT 1 3/8X.876X.048 TH804-044C10.
WASHER LOCK SPRING 1/4 PLT804-006C11.
HANGER DRIVE SHAFT817-026C12.
DRIVE SPROCKET SEED CUP123-053E13.
PIN COTTER5/32 X 1 PLT805-019C14.
ADJUSTMENT HANDLE PIVOT123-050H15.

SEED ADJUSTMENT SPOOL123-116D17.
SCREW SET 5/16-18 SKT KP X 3/8801-035C18.
6-59 SEED CUP SHAFT123-207D19.
7-59 SEED CUP SHAFT123-209D19.
7-1/2 - 59 SEED CUP SHAFT123-211D19.
10-59 SEED CUP SHAFT123-213D19.
12-59 SEED CUP SHAFT L.H.123-215D19.
6-81 SEED CUP SHAFT123-218D19.
7-81 SEED CUP SHAFT L.H.123-219D19.
7-81 SEED CUP SHAFT R.H.123-220D19.
7-1/2 - 81 SEED CUP SHAFT123-221D19.
8-81 SEED CUP SHAFT123-222D19.
10-81 SEED CUP SHAFT123-223D19.
12-81 SEED CUP SHAFT123-224D19.
GRASS SEEDER SHAFT COUPLER123-217D20.
SCR,HEX,SCKT. 5/16-24 X 5/16801-027C21.
WASHER FLAT 3/8 SAE PLT804-012C22.
NUT WING 5/16-18803-058C23.
ADJUSTMENT HANDLE WELDMENT123-051H24.
RHSNB 5/16-18X3/4 GR5802-092C25.
LOCK TAB123-113D26.
SCREW RD HD 8-32 X 3/8 BRASS801-001C27.
NAME PLATE ADJ. GUIDE SHORT819-005C28.
GAUGE MOUNTING BRACKET123-112D29.
WASHER FLAT #8 BRASS804-003C30.
WASHER INTERNAL STAR #8 BRASS804-002C31.
NUT HEX 8-32 BRASS803-035C32.
ADJUSTMENT SPOOL SPACER123-127D33.
1 1/16 ADJ SPOOL SPACER123-155D33.
11/16 ADJUSTMENT SPOOL SPACER123-156D33.
12 ADJUSTMENT SPOOL SPACER123-157D33.
10 ADJ.SPOOL SPACER123-158D33.
8 ADJUSTMENT SPOOL SPACER123-159D33.
7 1/2 ADJUSTMENT SPOOL SPACER123-160D33.
7 ADJUSTMENT SPOOL SPACER123-161D33.
1 1/8 ADJUSTMENT SPOOL SPACER123-162D33.
1 13/16 ADJ SPOOL SPACER123-152D33.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.(2SF24 S/N 3430F+) (2SF30 S/N

3275G+)

1st rev.(2SF24 S/N 3429F-) (2SF30 S/N

3274G-)

2nd rev.3/8 SHAFT LOCKING COLLAR890-349C16.

Use existingstock; 1st rev.RPBY 890-349C123-436D16.

11/05/13 - 57 - 155-015P

Table of Contents Part Number Index

Small Seeds Metering Assembly (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

15/16 ADJUSTMENT SPOOL SPACER123-153D33.
1/2 ADJUSTMENT SPOOL SPACER123-154D33.
SMALL SEEDS CUP WIND SHIELD817-806C34.

RevisionCommentsPart DescriptionPart No.Ref.

155-015P - 58 - 11/05/13

Table of Contents Part Number Index

Small Seeds Metering Assembly (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Metering System

11/05/13 - 59 - 155-015P

Table of Contents Part Number Index

Fertilizer Tray Assembly

(Applies to 2SF24 (1986+) only)

10097

155-015P - 60 - 11/05/13

Table of Contents Part Number Index

Fertilizer Tray Assembly

(Applies to 2SF24 (1986+) only)

Image No.dwg10097
12'-6 FERT. TRAY WELDMENT142-043E1.
12'-7 FERT. TRAY WELDMENT142-044E1.
12'-7 1/2 FERT.TRAY WELDMENT142-045E1.
12'-8 FERT. TRAY WELDMENT142-046E1.
12'-10 FERT. TRAY WELDMENT142-047E1.
12'-6 SLIDE WELDMENT142-065E2.
12'-7 SLIDE WELDMENT142-066E2.
12'- 7 1/2 SLIDE WELDMENT142-067E2.
12'-8 SLIDE WELDMENT142-068E2.
12'-10 SLIDE WELDMENT142-069E2.
SEAL 5/16 X 3/4 DOR-TITE TRAY990-024R3.
12' CLEAN-OUT HOLE COVER ASSY.142-095E4.
12'CENTER CARRIER BUSHING142-062D5.
FERT DROP TUBE ASSEMBLY BOX141-011E6.
SLIDE STOPASSEMBLY141-041E7.
TRAY BEARING SPACER141-084D8.
COVER PLATE TRAY141-083D9.
12' STD. AGITATOR TUBE-COMP.142-089K10.
12'-7 1/2 AGITATOR TUBE-COMP.142-090K10.
FELT SEAL890-026C11.
BEARING 1 - 3-BOLTFLANGED822-012C12.
WASHER LOCK SPRING 5/16 PLT804-009C13.
NUT HEX 5/16-18 PLT803-008C14.
NUT HEX SS 10-32803-002C15.
WASHER LOCK INTERNAL #10 SS804-032C16.
NUT HEX SS 1/4-20803-004C17.
WASHER LOCK 1/4 SS804-033C18.
HHCS 5/16-18X1 3/4 GR5802-013C19.
RHSNB 1/4-20X3/4 SS802-089C20.
HHCS 1/4-20X3/4 SS802-001C21.
.00 HEX SS 1/4-20 NYLOCK803-003C22.
WASHER FLAT 1/4 SAE SS804-034C23.
SCREW PAN HD 10-32 X 3/8 SS801-010C24.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H25.
ADJUSTMENT ARM ASSEMBLY141-013H26.
NUT WING 1/2-13 PLT803-016C27.
NUT LOCK 1/2-13 PLT803-019C28.
12' AGITATOR TUBE MACHINED142-082E29.
RIVET SS 1/8 DIA800-012C30.
12' STD. FIN ASSEMBLY142-092E31.
12'-7 1/2 FIN ASSEMBLY-LONG142-093E31.
12'-7 1/2 FIN ASSEMBLY-SHORT142-094E31.
LATCH STRIKE800-032C32.
WASHER MACH 2 1/2X1 3/4X.075804-048C33.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 61 - 155-015P

Table of Contents Part Number Index

Fertilizer Tray Assembly

(Applies to 2SF30 (1986+) only)

10231

155-015P - 62 - 11/05/13

Table of Contents Part Number Index

Fertilizer Tray Assembly

(Applies to 2SF30 (1986+) only)

Image No.dwg10231
15'-6 FERT. TRAY WELDMENT142-054E1.
15'-7 FERT. TRAY WELDMENT142-055E1.
15'-7 1/2 FERT.TRAY WELDMENT142-056E1.
15'-8 FERT. TRAY WELDMENT142-057E1.
15'-10 FERT. TRAY WELDMENT142-058E1.
12',14' & 15' FERT TRAY142-003E2.
14'& 15'-7 FERT.TRAY WELDMENT142-084E2.
14'& 15'-7 1/2 FERT TRAY WLDMT142-085E2.
14'& 15'-8 FERT.TRAY WELDMENT142-086E2.
14'& 15'-10 FERT TRAY WELDMENT142-087E2.
6 SLIDE ASSEMBLY141-014E3.
7 SLIDE ASSEMBLY141-016E3.
7 1/2 SLIDE WELDMENT-LONG142-127E3.
8 SLIDE ASSEMBLY141-018E3.
10 SLIDE ASSEMBLY141-020E3.
15'-6 SLIDE EXTENSION WLDM'T.142-076E4.
15'-7 SLIDE EXTENSION WLDM'T.142-077E4.
15'-7 1/2 SLIDE EXTENSION WDMT142-078E4.
15'-8 SLIDE EXTENSION WLDM'T.142-079E4.
15'-10 SLIDE EXTENSION WLDM'T.142-080E4.
15' EXT. CLEAN-OUT HOLE COVER142-096E5.
CLEAN OUT HOLE CVR ASSY6,10,12141-063E6.
CLEAN OUT HOLE COVER ASSEMBLY141-064E6.
CLEAN OUT HOLE COVER ASSEMBLY141-065E6.
FERT DROP TUBE ASSEMBLY BOX141-011E7.
SLIDE STOPASSEMBLY141-041E8.
COVER PLATE TRAY141-083D9.
TRAY BEARING SPACER141-084D10.
FELT SEAL890-026C11.
BEARING 1 - 3-BOLTFLANGED822-012C12.
WASHER LOCK SPRING 5/16 PLT804-009C13.
NUT HEX 5/16-18 PLT803-008C14.
NUT HEX SS 10-32803-002C15.
WASHER LOCK INTERNAL #10 SS804-032C16.
NUT HEX SS 1/4-20803-004C17.
WASHER LOCK 1/4 SS804-033C18.
HHCS 5/16-18X1 3/4 GR5802-013C19.
RHSNB 1/4-20X3/4 SS802-089C20.
HHCS 1/4-20X3/4 SS802-001C21.
.00 HEX SS 1/4-20 NYLOCK803-003C22.
WASHER FLAT 1/4 SAE SS804-034C23.
SCREW PAN HD 10-32 X 3/8 SS801-010C24.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H25.
ADJUSTMENT ARM ASSEMBLY141-013H26.
NUT WING 1/2-13 PLT803-016C27.
NUT LOCK 1/2-13 PLT803-019C28.
14'& 15' AGITATOR TUBE -DRIVE142-005E29.
14'& 15' AGITATOR TB. NONDRIVE142-126E29.
RIVET SS 1/8 DIA800-012C30.
AGITATOR FIN ASSEMBLY145-022S31.
12',14',& 15'AGITATOR TUBE142-011K32.
15' AGITATOR TUBE EXT.NONDRIVE142-083E33.
14'& 15' AGITATOR TUBE -DRIVE142-005E33.
15' FIN ASSEMBLY142-161S34.
15' AGITATOR TUBE EXT.NONDRIVE142-091K35.
12',14',& 15'AGITATOR TUBE142-011K35.
SEAL 5/16 X 3/4 DOR-TITE TRAY990-024R36.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 63 - 155-015P

Table of Contents Part Number Index

Fertilizer Tray Assembly (continued)

(Applies to 2SF30 (1986+) only)

CENTER DRIVE BUSHING142-029D37.
CENTER CONNECTORSHAFT142-022D38.
LATCH STRIKE800-032C39.

RevisionCommentsPart DescriptionPart No.Ref.

155-015P - 64 - 11/05/13

Table of Contents Part Number Index

Fertilizer Tray Assembly (continued)

(Applies to 2SF30 (1986+) only)

This Page Intentionally Left Blank

Metering System

11/05/13 - 65 - 155-015P

Table of Contents Part Number Index

Native Grass Feed Cup Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11385

155-015P - 66 - 11/05/13

Table of Contents Part Number Index

Native Grass Feed Cup Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11385
CASTING GRASS SEED FEEDER CUP812-054C1.
CLAMP BAND 2 1/2800-067C2.
HHCS 1/4-20X3/4 GR5802-004C3.
NUT-HEX 1/4-20 PLT803-006C4.
WASHER LOCK 1/4 EXTERNAL TOOTH804-052C5.
GRASS METER SPROCKET202-007D6.
SCREW SET SH 3/8-16X3/8 TYPE C801-023C7.
NUT HEX 10-24 PLT803-001C8.
WASHER INTERNAL STAR #10 PLT804-004C9.
SCREW RD HD SLT10-24X1/2 PLT801-003C10.
GRASS SEED METER WHEEL COVER202-055D11.
GASKET GRASS SEED METER WHEEL816-051C12.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 67 - 155-015P

Table of Contents Part Number Index

Gauge Wheel Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10208

155-015P - 68 - 11/05/13

Table of Contents Part Number Index

Gauge Wheel Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10208

RPBY 814-011C814-026C2.
VALVE STEM TR415X.625X1 1/4 LG816-035C3.
WHEEL 6 X 15 X 5 BOLT814-005C4.
NUT LUG 1/2-20X90DEG PLT13/16803-017C5.
HUB STUD 1/2-20X1 5/8 GR5802-135C6.
GAUGE WHEEL AXLE HUB W/STUDS200-012S7.
BEARING GAUGE WHEEL822-028C8.
LH GA WHL HANGER DRIVE END120-069H9.

HHCS 1/2-13X3 GR5802-039C10.
RHSSNB 5/16-18X10 1/2 GR5802-019C11.
AXLE SHAFT WELDMENT120-124H12.
SPKT 15 TEETH X 1 1/2 BORE808-002C13.
PIN ROLL 5/16 X 2 1/4 PLT805-029C14.

PIVOTMOUNT SHORT LH120-043H16.

PIVOTMOUNT LONG LH120-041H17.

HHCS 1/2-13X1 3/4 GR5802-082C18.
WASHER FLAT 1/2 SAE PLT804-016C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C22.
WASHER LOCK SPRING 5/8 PLT804-022C23.
NUT HEX 5/8-11 PLT803-021C24.
HHCS 5/8-11X2 GR5802-055C25.
HHCS 5/8-11X5 GR5802-062C26.
NUT HEX 3/4-10 PLT803-027C27.
WASHER LOCK SPRING 3/4 PLT804-023C28.
BRG .75ID SPEED CHANGE822-043C29.
SPEEDCHANGE HUB 3/4 I.D.120-145S30.
WASHER FLAT 5/8 SAE PLT804-021C31.
NUT HEX JAM 5/8-11 PLT803-023C32.
IDLER DISC109-064D33.
SPEED CHANGE WELDMENT109-055E34.
IDLER ARM BAR120-035D35.
NUT HEX NYLOCK 5/8-11 PLT803-148C36.
HHCS 5/8-11X2 1/4 GR5802-057C37.
3-PT DUALGA WHL AXLE SHAFT120-126H38.
HHCS 1/2-13X2 3/4 GR5802-226C39.

LOWER GAUGE WHEEL CLEVIS120-002E41.
NUT HEX JAM 1 1/4-7 PLT803-032C42.
GAUGE WHEEL ADJ LINK120-003E43.
UPPER GAUGE WHEEL CLEVIS120-001E44.
LOWER GW CLEVIS WELDMENT120-170H45.

DUAL GW HUB WELDMENT120-080H47.
ACRE METER 24'890-002C48.
ACRE METER 30'890-012C48.
GW DRIVE BRAKE MOUNT WELDMENT120-177H49.
GW DRIVE BRAKE WELDMENT120-178H50.
LOWER GUARD WELDMENT-LH202-327H51.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 2, 3 & 4TIRE 9.5LX15 ON 6IN 5BOLT RIM109-058K1.

ShownRH DRIVE GA WHL HANGER120-070H9.

2nd rev.CHAIN RL 20-50A 37 PITCHES136-001D15.

Use existingstock; 1st rev.RPBY 136-001D809-001C15.

ShownPIVOTMOUNT SHORT RH120-044H16.

ShownPIVOTMOUNT LONG RH120-042H17.

Not available.GW ADJ LINK ASSEMBLY120-065S40.

Includes items 41 thru 44.G.W.ADJ LINK ASSY120-190S46.

ShownLOWER GUARD WELDMENT-RH202-326H51.

11/05/13 - 69 - 155-015P

Table of Contents Part Number Index

Gauge Wheel Drive (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

U-BOLT 3/8-16 X 3 1/32 X 4806-021C52.
MOUNT CHANNEL120-053D53.
HHCS 1/2-13X1 1/2 GR5802-091C54.
NUT HEX 3/8-16 PLT803-014C55.
WASHER LOCK SPRING 3/8 PLT804-013C56.

RevisionCommentsPart DescriptionPart No.Ref.

155-015P - 70 - 11/05/13

Table of Contents Part Number Index

Gauge Wheel Drive (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Drive

11/05/13 - 71 - 155-015P

Table of Contents Part Number Index

Jack Shaft Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10997

155-015P - 72 - 11/05/13

Table of Contents Part Number Index

Jack Shaft Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10997
JACKSHAFT BEARING BRACKET RH120-159D1.
JACKSHAFT BEARING BRACKET LH120-160D2.
BRG FLG 1.00ID 2BOLT822-007C3.
13' JACKSHAFT120-011D4.
NUT HEX 1/2-13 PLT803-020C5.
WASHER LOCK SPRING 1/2 PLT804-015C6.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C7.
SPKT 50B15 X 1 BORE808-004C8.
SPRKT 50 B 20 T00TH X 1 BORE808-116C8.
PIN ROLL 5/16 X 2 1/4 PLT805-029C9.

JACK SHAFT - KEY109-031D11.
HHCS 5/16-18X1 1/2 GR5802-012C12.
NUT HEX 5/16-18 PLT803-008C13.
WASHER LOCK SPRING 5/16 PLT804-009C14.
SPKT 50B39 X 1 BORE808-003C15.
SPKT 50B19 X 1 BORE808-006C16.

CHAIN TIGHTENER JS-FEEDER CUP120-020H18.
HHCS 5/8-11X2 GR5802-055C19.
IDLER SPACER TUBE120-176D20.
IDLER DISC109-064D21.
WASHER LOCK SPRING 5/8 PLT804-022C22.
NUT HEX 5/8-11 PLT803-021C23.
HHCS 1/2-13X1 1/2 GR5802-091C24.
WASHER FLAT 1/2 SAE PLT804-016C25.

SCREW SET 5/16-18 SKT KP X 3/8801-035C27.
IDLER BAR SPACER152-055D28.
GREASE ZERK STRAIGHT 1/4-28800-001C29.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.CHAIN RL 20-50A 50 PITCHES136-003D10.

Use existingstock; 1st rev.RPBY 136-003D809-005C10.

2nd rev.CHAIN RL #20-50A 45 PITCHES136-084D17.

Use existingstock; 1st rev.RPBY 136-084D809-105C17.

2nd rev.CHAIN RL #2050A 4 PITCHES136-142D26.

Use existingstock; 1st rev.RPBY 136-142D809-012C26.

11/05/13 - 73 - 155-015P

Table of Contents Part Number Index

Electric Clutch Assembly (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10868

155-015P - 74 - 11/05/13

Table of Contents Part Number Index

Electric Clutch Assembly (Option)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10868
CLUTCH CW176-025S1.
CLUTCH CCW176-026S1.
45' 3-SEC 39T CLUTCH SPROCKET172-018D2.
11' 3-SEC 19T CLUTCH SPROCKET172-019D2.
PIN ROLL 3/16 X 2 1/2 LG. PTL.805-062C3.
BRG FLG 1.00ID 2BOLT822-007C4.
HHCS 1/2-13X1 1/2 GR5802-091C5.
INNER PIVOT BUSHING132-084D6.
SOLENOID MOUNTING PLATE116-052D7.
HHCS 5/16-18X2 GR5802-115C8.
WASHER FLAT 5/16 SAE PLT804-036C9.
CLUTCH PIVOT BUSHING116-053D10.
COIL & ACTUATOR ASS'Y.CW823-022C11.
COIL & ACTUATOR ASS'Y.CCW823-023C11.
WASHER LOCK SPRING 5/16 PLT804-009C12.
NUT HEX 5/16-18 PLT803-008C13.
WASHER LOCK #10804-054C14.
NUT HEX 10-24 PLT803-001C15.
CLUTCH WIRING HARNESS823-021C16.
HHCS #10-24X1/2 GR5802-163C17.
HHCS 1/4-20X3/4 GR5802-004C18.
WASHER LOCK SPRING 1/4 PLT804-006C19.
2 LEAD 18 GA WIRE325-0014-00120.
BRN 2 LEAD 18 GA WIRE309-1882-P0021.
BRN FE DISCONT 1/4 (2WIRES)122-2560-00022.
BRN FE DISCONT 1/4 (1WIRE)122-2564-00023.
BRN ILLUMINATED ROCKER SWITCH110-0109-00124.
BRN 3 LEAD 18 GA WIRE309-1883-P0025.
AMP CONNECTORCLAMP112-2510-00126.
FEMALE 4 PRONG AMP CONNECTOR112-2511-00127.
MALE 4 PRONG AMP CONNECTOR112-2528-00128.
FEMALE SOCKET FOR AMP112-2274-00129.
MALE PIN FOR AMP112-2275-00130.
CLUTCH SWITCH MOUNTING PLATE116-054D31.
SCREW HEX SLT10-16X1/2P.THD CT801-002C32.
NUT HEX 5/8-11 PLT803-021C33.
WASHER LOCK SPRING 5/8 PLT804-022C34.
IDLER DISC109-064D35.
NUT HEX JAM 1/2-13 PLT803-036C36.
CHAIN TIGHTENER JS-FEEDER CUP120-020H37.
JACKSHAFT BEARING BRACKET RH120-159D38.
13' JACKSHAFT120-011D39.
20' JACKSHAFT120-030D39.
63 INCH JACKSHAFT120-167D39.
WING JACKSHAFT172-074D39.
CW CLUTCH & COIL ASSEMBLY116-031K40.
CCW CLUTCH & COIL ASSEMBLY116-030K40.
CABLE TIE .31X21.5 6DIA 120LB800-082C41.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

11/05/13 - 75 - 155-015P

Table of Contents Part Number Index

Small Seeds Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11120

155-015P - 76 - 11/05/13

Table of Contents Part Number Index

Small Seeds Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11120
NUT HEX 5/16-18 PLT803-008C1.
WASHER LOCK SPRING 5/16 PLT804-009C2.
WASHER FLAT 5/16 USS PLT804-010C3.
GRASS SEEDER JACKSHAFT 3-POINT123-052D4.
WASHER FLAT 1/2 SAE PLT804-016C5.
WASHER LOCK SPRING 1/2 PLT804-015C6.
NUT HEX JAM 1/2-13 PLT803-036C7.
NO. 40 12T IDLER SPKT.817-025C8.
HHCS 1/2-13X2 3/4 GR5802-226C9.
BRG INS .75IDX1.85OD SPH LCK822-040C10.
SPKT 40B10 X 3/4 BORE808-027C11.

FLANGETTE 47 MST822-041C14.

CHAIN IDLER BRACKET123-294H16.
HHCS 1/2-13X1 1/4 GR5802-034C17.
GRASS SEEDER DRIVE INDICATOR123-294D18.
HHCS 5/16-18X3/4 GR5802-007C19.
HHCS 1/2-13X5 1/2 GR5802-046C20.
GRASS SEED DRIVE CHANGE SHAFT123-284H21.
DRIVE BRACKETSPACER TUBE123-293D22.
DRIVE MOUNT BRACE TYPE B123-264D23.
DRIVE MOUNT BRACE TYPE A123-265D23.
2 SECTION TYPE A DRIVE BRACE123-270D24.
2 SECTION TYPE B DRIVE BRACE123-271D24.
WASHER FLAT 5/16 USS PLT804-010C25.
WASHER LOCK SPRING 5/16 PLT804-009C26.
NUT HEX 5/16-18 PLT803-008C27.
SNAP RING EXT 1 1/2 SHAFT800-044C28.
DRIVE SPROCKET ASSEMBLY123-285H29.
PIN COTTER3/32 X 2 PLT805-078C30.
KEY 1/4 X 1123-004D31.
SHEAR SPROCKET HUB123-288D32.
SCREW SET SH 1/4-20 X 1/4 LG.801-019C33.
JACKSHAFT BEARING BRACKET RH120-159D34.
BRG FLG 1.00ID 2BOLT822-007C35.
HHCS 5/16-18X1 1/2 GR5802-012C36.
U-BOLT 1/2-13 X 3 17/32 X4 3/4806-002C37.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.KEY 3/16 X 7/8800-296C12.

Use existingstock; 1st rev.RPBY 800-296C123-146D12.

2nd rev.CHAIN RL #40 36 PITCHES136-011D13.

Use existingstock; 1st rev.RPBY 136-011D809-020C13.

3rd rev.CHAIN RL #40 76 PITCHES136-013D15.

Use existingstock; 2nd rev.RPBY 136-013D136-002S15.

Use existingstock; 1st rev.RPBY 136-002S809-022C15.

Includes items 28, 29, 30, 32 and 33.SHEAR SPROCKET ASSEMBLY123-308S38.

11/05/13 - 77 - 155-015P

Table of Contents Part Number Index

Fertilizer Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11242

155-015P - 78 - 11/05/13

Table of Contents Part Number Index

Fertilizer Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11242
HHCS 3/8-16X1 1/4 GR5802-079C1.
NUT HEX 3/8-16 PLT803-014C2.
WASHER LOCK SPRING 3/8 PLT804-013C3.
FERT 39T SPRKT HUB & BRG ASSY145-016S4.
SEED/FERT ADAPTOR HUB145-006E5.
BRG BALL 30IDX62OD 206822-006C6.
RING FC HOUSING800-005C7.
FEEDER CUP BRG HOUSING109-039D8.

SNAP RING EXT BASIC 1 3/16800-004C10.
GREASE ZERK STRAIGHT 1/4-28800-001C11.
JACK SHAFT - KEY109-031D12.
HHCS 1/2-13X3/4 GR5802-032C13.
WASHER LOCK SPRING 1/2 PLT804-015C14.
SPROCKET 50B15 X 1 BORE808-008C15.
SPROCKET 50B26 X 1 BORE808-007C16.
SPKT 50B22 X 1 BORE808-122C16.
PIN ROLL 5/16 X 2 1/4 PLT805-029C17.
OFFSET IDLER SUPPORT 12' & 15'142-125D18.
OFFSET IDLER SUPPORT 14' & 20'142-126D18.
HHCS 5/8-11X2 GR5802-055C19.
NUT HEX 5/8-11 PLT803-021C20.
WASHER FLAT 5/8 SAE PLT804-021C21.
IDLER DISC109-064D22.
WASHER LOCK SPRING 5/8 PLT804-022C23.
NUT HEX JAM 5/8-11 PLT803-023C24.
UPPER FERTHOSE CLAMP800-016C25.
END WHEEL SEED HOSE816-055C26.
PIN COTTER5/32 X 1 PLT805-019C27.
FERTILIZER LATCH WELDMENT141-116H28.
COVER HANDLE CHAIN142-009D29.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.CHAIN RL 20-50A 37 PITCHES136-001D9.

Use existingstock; 1st rev.RPBY 136-001D809-001C9.

11/05/13 - 79 - 155-015P

Table of Contents Part Number Index

Native Grass Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10995

155-015P - 80 - 11/05/13

Table of Contents Part Number Index

Native Grass Drive

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10995
NUT-HEX 1/4-20 PLT803-006C1.
BRG PB .75ID PILLOW BLOCK822-057C2.
CUP BEARING SUPPORT202-026D3.
HHCS 1/4-20X1 1/2 GR5802-167C4.
WASHER LOCK SPRING 1/4 PLT804-006C5.
WASHER FLAT 3/8 USS PLT804-011C6.
HHCS 5/16-18X3/4 GR5802-007C7.
WASHER FLAT 5/16 USS PLT804-010C8.
WASHER LOCK SPRING 5/16 PLT804-009C9.
NUT HEX 5/16-18 PLT803-008C10.
DOUBLE IDLER ARM WELDMENT202-261H11.
IDLER ARM MOUNT WELDMENT202-260H12.
NO. 40 12T IDLER SPKT.817-025C13.
WASHER FLAT 1/2 SAE PLT804-016C14.
PIN COTTER7/64 X 1 LONG805-064C15.
DOUBLE DISK ARM PIVOT BUSHINGS817-028C16.
WASHER FLAT 5/8 SAE PLT804-021C17.
HHCS 3/8-16X1 3/4 GR5802-023C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
AGITATOR WELDMENT 6202-121H20.
AGITATOR WELDMENT OFFSET LH202-123H20.
AGITATOR WELDMENT UNEQUAL LH202-125H20.
HHCS 3/8-16X2 GR5802-143C21.
GRASS SEEDER BOX MT. SPACER123-204D22.
WASHER LOCK SPRING 3/8 PLT804-013C23.
NUT HEX 3/8-16 PLT803-014C24.
12' SHAFT - GRASS202-034D25.
15' SHAFT - GRASS202-035D25.
15T SPEED CHANGE SPROCKET202-001H26.
19T SPEED CHANGE SPROCKET202-002H26.
30T SPEED CHANGE SPROCKET202-004H26.
35T SPEED CHANGE SPROCKET202-005H26.
PIN LINCH 1/4 X 1 3/4 PLT805-126C27.
HHCS 5/16-18X1 1/4 GR5802-010C28.
BRG FLG .75ID 2BOLT822-071C29.
AGITATOR WELDMENT 10 & 12202-119H30.
AGITATOR WELDMENT 7,7 1/2 & 8202-120H30.
AGITATOR WELDMENT 6202-121H30.
AGITATOR WELDMENT 6202-121H31.
AGITATOR WELDMENT OFFSET RH202-122H31.
AGITATOR WELDMENT UNEQUAL RH202-124H31.

GRASS SEEDER DRIVE HUB202-009H33.
BRG BALL 30IDX62OD 206822-006C34.
RING FC HOUSING800-005C35.
FEEDER CUP BRG HOUSING109-039D36.
WASHER LOCK SPRING 1/2 PLT804-015C37.
HHCS 1/2-13X3/4 GR5802-032C38.
SNAP RING EXT BASIC 1 3/16800-004C39.
GREASE ZERK STRAIGHT 1/4-28800-001C40.
GRASS 39T SPROCKET HUB & BRG202-092S41.
FLANGETTE 47 MST822-041C42.
BRG INS .75IDX1.85OD SPH LCK822-040C43.
HHCS 5/16-18X3/4 GR5802-007C44.
SCREW SET SQ HD 3/8-16 X 3/4CP801-036C45.
ROD AGITATOR202-335H46.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.CHAIN RL #40 119 PITCHES136-055D32.

Use existingstock; 1st rev.RPBY 136-055D809-059C32.

11/05/13 - 81 - 155-015P

Table of Contents Part Number Index

Native Grass Drive (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

24T SPEED CHANGE SPROCKET202-003H47.
NUT-LOCK 1/4-20 PLT803-007C48.

RevisionCommentsPart DescriptionPart No.Ref.

155-015P - 82 - 11/05/13

Table of Contents Part Number Index

Native Grass Drive (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Drive

11/05/13 - 83 - 155-015P

Table of Contents Part Number Index

Native Grass Upper Drive & Chain Guard

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11336

155-015P - 84 - 11/05/13

Table of Contents Part Number Index

Native Grass Upper Drive & Chain Guard

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11336
UPPER GUARDWELDMENT-LH202-331H1.
UPPER GUARDWELDMENT-RH202-330H1.
HINGE MOUNT WELDMENT202-328H2.
GUARD HINGE MOUNT PIN202-132D3.
UPPER GUARDMOUNT PLATE202-120D4.

HHCS 5/16-18X1 1/2 GR5802-012C6.
NUT HEX 3/4-10 PLT803-027C7.
WASHER LOCK SPRING 3/4 PLT804-023C8.
BRG FLG 1.00ID 2BOLT822-007C9.
WASHER LOCK SPRING 5/16 PLT804-009C10.
NUT HEX 5/16-18 PLT803-008C11.
PIN, HAIR COTTER 3/16 WIRE DIA805-088C12.
PIN HAIR COTTER .094805-010C13.
HHCS 3/8-16X1 1/4 GR5802-079C14.
S.R. END SPACER 2X13 DOUBLE V121-093D15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
NUT HEX 3/8-16 PLT803-014C17.
GRASS SEEDER DRIVE HUB202-009H18.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

ShownJACKSHAFT BEARING BRACKET LH120-160D5.

11/05/13 - 85 - 155-015P

Table of Contents Part Number Index

Native Grass Lower Drive & Chain Guard

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11337

155-015P - 86 - 11/05/13

Table of Contents Part Number Index

Native Grass Lower Drive & Chain Guard

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11337
LH GA WHL HANGER DRIVE END120-069H1.

LOWER GUARD WELDMENT-LH202-327H2.

U-BOLT 3/8-16 X 3 1/32 X 4806-021C3.
WASHER LOCK SPRING 3/8 PLT804-013C4.
NUT HEX 3/8-16 PLT803-014C5.
SPKT 15 TEETH X 1 1/2 BORE808-002C6.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

ShownRH DRIVE GA WHL HANGER120-070H1.

ShownLOWER GUARD WELDMENT-RH202-326H2.

2nd rev.CHAIN RL 20-50A 37 PITCHES136-001D7.

Use existingstock; 1st rev.RPBY 136-001D809-001C7.

11/05/13 - 87 - 155-015P

Table of Contents Part Number Index

Option 00 Straight Arm Opener (1994+)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11977

155-015P - 88 - 11/05/13

Table of Contents Part Number Index

Option 00 Straight Arm Opener (1994+)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11977
U-BOLT 3/8-16 X 2 X 2 3/4806-004C1.
WASHER LOCK SPRING 3/8 PLT804-013C2.
NUT HEX 3/8-16 PLT803-014C3.
FIRMING WHEEL ARM PIVOT121-125D4.
CASTING DOUBLE SPRING ROD812-012C5.
SPRING CASTING MTG ASS'Y121-011A6.
STRAIGHT ARM OPENER SPRING ROD121-133D7.
HHCS 1/4-20X3/4 GR5802-004C8.
WASHER LOCK SPRING 1/4 PLT804-006C9.
NUT-HEX 1/4-20 PLT803-006C10.
SPRING COMP 13/16IDX.156WX19.5807-118C11.
DISC SPRING BAR WIRE CLIP107-027D12.
CLAMP HOSE 1 5/8 NO. 26800-009C13.
SEED HOSE 30 RIBS X 7 1/2 LG816-114C14.
OPENER WELDMENT - SHORT121-703H15.

2SEC CLEARANCE OPENER-FIELD142-824H15.

RHSNB 1/2-13X5 1/2 GR5802-121C17.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C18.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C19.
RPBY 820-187C820-155C20.

RPBY 107-134A820-080C20.

BEARING AA205DD188-001V21.

DD BRG FLANGE DUST COVER107-111D25.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C26.
WASHER FLAT 3/8 SAE PLT804-012C27.
D.D. SLOTTED SCRAPER107-113D28.
CLAMP HOSE 1 1/2 NO. 24800-008C30.
STRAIGHT ARM OPENER PIVOT PIPE142-198D31.
HFS 3/8-16X3 3/4 SPTHD802-427C32.
NUT FLANGE LOCK 3/8-16 PLT803-209C33.
PARALLEL ARM PIVOT BUSHING817-084C34.
OFFSET SPRING ROD CLIP R.H.121-127D35.
OFFSET SPRING ROD CLIP L.H.121-128D36.
WASHER MACH 1.19 X .63 X 18GA804-040C37.
RHSNB 3/8-16X1 GR5802-015C38.

SCREW HEX SLT10-16X1/2P.THD CT801-002C40.
WASHER LOCK SPRING 1/2 PLT804-015C41.

For drillsmanufactured before

5/1/2000 also order part no.
122-202S, refer to "2" x 13" Smooth
Crown Press Wheel (2SF24 S/N
3235F- & 2SF30 S/N 3045G-)" item

19.

107-133S, item 25.

Use with 820-155C (1/4" rivets).HSG RIBB FLG 6BOLTPLT890-466C22.

Use with 820-155C.RIVET,BUTTON HEAD 1/4 X 1/2800-213C23.

Includes items 20, 21, 22 & 23.RPBY 107-135S107-133S24.

Model year 1998-.PLASTIC OPENER SEED TUBE817-133C39.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.U-MOUNT WITH 2 DROP107-116D16.

1st rev.RPBY 107-116D121-016H16.

Rev. 2 is not interchangeable

w/rev. 1

1st rev.No longer available. Update with

Rev. 2 is not interchangeable

w/rev. 1
1st rev.Use with 820-080C (3/16" rivets).BEARING FLANGE-3/16 DIA HOLES107-112D22.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.Use with 820-080C.RIVET,BUTTON HEAD .203 X 9/16800-212C23.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.RPBY 107-133S107-130S24.

2nd rev.NUT HEX WHIZ 1/2-13803-037C42.

11/05/13 - 89 - 155-015P

Table of Contents Part Number Index

Option 00 Straight Arm Opener (1994+) (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

NUT HEX 5/16-18 PLT803-008C43.
WASHER LOCK SPRING 5/16 PLT804-009C44.
WASHER FLAT 5/16 SAE PLT804-036C45.
10 1/2 DEPTH BAND WLMT121-704H46.
HHCS 7/16-14X1 1/2 GR5802-029C47.
10 1/2 DEPTH BAND BUNDLE121-705A48.

Includes items 25, 26 & 37.BLADE UPDATE HARDWARE107-136S49.
Includes items 24 & 50.13 1/2 BLADE UDPATE-1/4 RIVETS107-134A50.
Model year 1999+.HEX SEED FLAP MOUNTING CLIP121-164D51.
Model year 1999+.SEED FLAP, RUBBER, SEED-LOK816-302C52.
Model year 1999+.SEED FLAP & HEX CLIP, SEEDLOK122-242S53.
Model year 1999+.OPENER SEED TUBE, PLASTIC817-314C54.

RevisionCommentsPart DescriptionPart No.Ref.

Use existingstock; 1st rev.NUT HEX 1/2-13 PLT803-020C42.

155-015P - 90 - 11/05/13

Table of Contents Part Number Index

Option 00 Straight Arm Opener (1994+) (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Openers

11/05/13 - 91 - 155-015P

Table of Contents Part Number Index

Double Disk Opener (Standard 1991-1993)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

11291

155-015P - 92 - 11/05/13

Table of Contents Part Number Index

Double Disk Opener (Standard 1991-1993)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg11291
U-BOLT 3/8-16 X 2 X 2 3/4806-004C1.
WASHER LOCK SPRING 3/8 PLT804-013C2.
NUT HEX 3/8-16 PLT803-014C3.
SPRING ROD CASTING CLIP121-025D4.
CASTING DOUBLE SPRING ROD812-012C5.

Includes items 1 thru 5.SPRING CASTING MTG ASS'Y121-011A6.
StandardDOUBLEDISK SPRING ROD121-110D7.

OptionalHILLSIDE D.D. SPRING ROD121-090D7.
HHCS 1/4-20X3/4 GR5802-004C8.
WASHER LOCK SPRING 1/4 PLT804-006C9.
NUT-HEX 1/4-20 PLT803-006C10.

Standard3PT.DD HEAVYSPRING 19 1/2 LG807-028C11.

Optional3 PT DD LIGHT SPRING 19 1/2 LG807-029C11.
DISC SPRING BAR WIRE CLIP107-027D12.
CLAMP HOSE 1 5/8 NO. 26800-009C13.
HOSE SOLID STAND DD SHORT816-046C14.
3-PT DOUBLE DISK MOUNTING ARM121-147H15.
FLANGED U MOUNT BRACKET107-097D16.
RHSNB 1/2-13X5 1/2 GR5802-121C17.
NUT NYLOCK JAM NUT 1/2-13803-178C18.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
NUT HEX 1/2-13 PLT803-020C21.
RPBY 820-187C820-155C22.

RPBY 107-134A820-080C22.

107-133S, item 26.

BEARING AA205DD188-001V23.

Use with 820-155C (1/4" rivets).HSG RIBB FLG 6BOLTPLT890-466C24.

Use with 820-155C.RIVET,BUTTON HEAD 1/4 X 1/2800-213C25.

Includes items 22, 23, 24 & 25.RPBY 107-135S107-133S26.

DD BRG FLANGE DUST COVER107-111D27.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C28.
RHSNB 3/8-16X1 GR5802-015C29.
WASHER FLAT 3/8 SAE PLT804-012C30.
D.D. SLOTTED SCRAPER107-113D31.
SCREW HEX SLT10-16X1/2P.THD CT801-002C32.
PLASTIC SEED DROP & GUIDE ASSY817-060C33.
HHCS 3/8-16X4 3/4 GR5 SPTHD802-174C34.
NUT LOCK 3/8-16 NYLON INSERT803-078C35.
DD ARM PIVOT PIPE SPACER121-101D36.
DOUBLE DISK ARM PIVOT BUSHINGS817-028C37.
OFFSET SPRING ROD CLIP L.H.121-128D38.
OFFSET SPRING ROD CLIP R.H.121-127D39.
SPRING ROD CENTER SPACER TUBE121-091D40.
S.R. END SPACER 4X12 & 2X13 SG121-092D41.
7 STAGGER D.D. MOUNT121-017E42.

WASHER MACH 1.19 X .63 X 18GA804-040C44.
NUT HEX 5/16-18 PLT803-008C45.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2 is not interchangeable

w/rev. 1

1st rev.No longer available. Update with

Rev. 2 is not interchangeable

w/rev. 1
1st rev.Use with 820-080C (3/16" rivets).BEARING FLANGE-3/16 DIA HOLES107-112D24.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.Use with 820-080C.RIVET,BUTTON HEAD .203 X 9/16800-212C25.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.RPBY 107-133S107-130S26.

2nd rev.U-MOUNT WITH 2 DROP107-116D43.
Use existingstock; 1st rev.RPBY 107-116D121-016H43.

11/05/13 - 93 - 155-015P

Table of Contents Part Number Index

Double Disk Opener (Standard 1991-1993) (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

WASHER LOCK SPRING 5/16 PLT804-009C46.
WASHER FLAT 5/16 SAE PLT804-036C47.
10 1/2 DEPTH BAND WLMT121-704H48.
HHCS 7/16-14X1 1/2 GR5802-029C49.
10 1/2 DEPTH BAND BUNDLE121-705A50.

Includes items 27, 28 & 44.BLADE UPDATE HARDWARE107-136S51.
Includes items 26 & 51.13 1/2 BLADE UDPATE-1/4 RIVETS107-134A52.

RevisionCommentsPart DescriptionPart No.Ref.

155-015P - 94 - 11/05/13

Table of Contents Part Number Index

Double Disk Opener (Standard 1991-1993) (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Openers

11/05/13 - 95 - 155-015P

Table of Contents Part Number Index

Heavy Duty Native Grass Opener Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10875

155-015P - 96 - 11/05/13

Table of Contents Part Number Index

Heavy Duty Native Grass Opener Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Image No.dwg10875
DD ARM PIVOT PIPE SPACER121-101D1.
DOUBLE DISK ARM PIVOT BUSHINGS817-028C2.
SS NATIVE GRASS DD ARM202-265H3.
DISC SPRING BAR WIRE CLIP107-027D4.
DOUBLE DISK SPRING ROD121-110D5.
3 PT.DD HEAVY SPRING 19 1/2 LG807-028C6.
3 PT DD LIGHT SPRING 19 1/2 LG807-029C6.
CLAMP HOSE 1 1/2 NO. 24800-008C7.
DOUBLE DISK HOSE SHORT816-028C8.
HOSE NATIVE GRASS SOLID STAND816-052C9.
CLAMP BAND 2 1/2800-067C10.
NUT LOCK 3/8-16 NYLON INSERT803-078C11.
NUT HEX 3/8-16 PLT803-014C12.
WASHER LOCK SPRING 3/8 PLT804-013C13.
WASHER FLAT 3/8 SAE PLT804-012C14.
D.D. SLOTTED SCRAPER107-113D15.
WASHER MACH 1.19 X .63 X 18GA804-040C16.
RHSNB 3/8-16X1 GR5802-015C17.
HHCS 3/8-16X4 GR5802-223C18.

Includes items 22, 23, 45 & 46.RPBY 107-135S107-133S19.

HHCS 5/8-11X1 1/2 GR5 NYL802-228C20.
DD BRG FLANGE DUST COVER107-111D21.
BEARING AA205DD188-001V22.
RPBY 820-187C820-155C23.

RPBY 107-134A820-080C23.

107-133S, item 19.
HHCS 1/4-20X3/4 GR5802-004C24.
WASHER LOCK SPRING 1/4 PLT804-006C25.
NUT-HEX 1/4-20 PLT803-006C26.
CASTING DOUBLE SPRING ROD812-012C27.
SPRING ROD CASTING CLIP121-025D28.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C29.
OFFSET SPRING ROD CLIP L.H.121-128D30.
OFFSET SPRING ROD CLIP R.H.121-127D31.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C32.
NUT HEX 1/2-13 PLT803-020C33.
WASHER LOCK SPRING 1/2 PLT804-015C34.
FLANGED U MOUNT BRACKET107-097D35.
RHSNB 1/2-13X5 1/2 GR5802-121C36.
NUT NYLOCK JAM NUT 1/2-13803-178C37.
7 STAGGER D.D. MOUNT121-017E38.

DEPTH BAND202-263H40.
RHSNB 5/16-18X3/4 GR5802-092C41.
WASHER LOCK SPRING 5/16 PLT804-009C42.
NUT HEX 5/16-18 PLT803-008C43.

Includes items 12, 13, 27, 28 & 29.SPRING CASTING MTG ASS'Y121-011A44.

CLAMP HOSE 1 5/8 NO. 26800-009C45.

Use with 820-155C (1/4" rivets).HSG RIBB FLG 6BOLTPLT890-466C46.

Use with 820-155C.RIVET,BUTTON HEAD 1/4 X 1/2800-213C47.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Rev. 2 is not interchangeable

w/rev. 1

1st rev.RPBY 107-133S107-130S19.

Rev. 2 is not interchangeable

w/rev. 1

1st rev.No longer available. Update with

2nd rev.U-MOUNT WITH 2 DROP107-116D39.
Use existingstock; 1st rev.RPBY 107-116D121-016H39.

Rev. 2 is not interchangeable

w/rev. 1
1st rev.Use with 820-080C (3/16" rivets).BEARING FLANGE-3/16 DIA HOLES107-112D46.
Rev. 2 is not interchangeable

w/rev. 1

11/05/13 - 97 - 155-015P

Table of Contents Part Number Index

Heavy Duty Native Grass Opener Assembly (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

Includes items 18, 20 & 21.BLADE UPDATE HARDWARE107-136S48.

Includes items 19 & 48.13 1/2 BLADE UDPATE-1/4 RIVETS107-134A49.
HHCS 7/16-14X2 1/4 GR5802-234C50.
WASHER FLAT 7/16 SAE PLT804-041C51.
NG PW PIVOT TUBE121-123D52.
WASHER LOCK 7/16 PLT804-014C53.

RevisionCommentsPart DescriptionPart No.Ref.

1st rev.Use with 820-080C.RIVET,BUTTON HEAD .203 X 9/16800-212C47.

155-015P - 98 - 11/05/13

Table of Contents Part Number Index

Heavy Duty Native Grass Opener Assembly (continued)

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

This Page Intentionally Left Blank

Openers

11/05/13 - 99 - 155-015P

Table of Contents Part Number Index

Standard Native Grass Opener Assembly

(Applies to 2SF24 (1986+), 2SF30 (1986+) only)

10874

155-015P - 100 - 11/05/13