Great Plains 2515 User Manual

Table of Contents Part Number Index

Parts Manual

Three-Point Soybean Machine

1515, 2015, & 2515

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

17765

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2012 Printed 05/16/12 173-159P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................4

Using This Manual...............................................................4

Manual Replacement Information.......................................4

Manual Revisions................................................................4

Touch-up Paint....................................................................4

Hardware Legend................................................................5

Replacement Hardware......................................................5

Serial Numbers...................................................................5

Part Number Service Coding..............................................5

Box and Frame...............................................................6

Box To Frame......................................................................6

Box Components.................................................................8

Lid To Box..........................................................................10

Seed Level Indicator..........................................................12

Parking Stand....................................................................14

Walkboard And Ladder......................................................16

Metering.......................................................................18

Feeder Cup Channel.........................................................18

Seed Rate Handle.............................................................20

1515 And 2015 Feeder Cup Spacing................................22

2515 Feeder Cup Spacing................................................24

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel

116-283A)...................................................................26

Gauge Wheels and Drives...........................................28

Single Gauge Wheel.........................................................28

Single Gauge Wheel To Drive...........................................30

Single Gauge Wheel Drive................................................32

Dual Gauge Wheel............................................................34

Dual Gauge Wheel To Drive..............................................36

Dual Gauge Wheel Drive...................................................38

Single Non-Drive Gauge Wheel........................................40

Dual Non-Drive Gauge Wheel...........................................42

Non-Drive Gauge Wheel Mount........................................44

Row Units.....................................................................46

Parallel Arm.......................................................................46

Spring Assembly...............................................................48

Shank Assembly...............................................................50

Adjustment Assembly........................................................52

Disk And Scraper..............................................................54

Side Gauge Wheel............................................................56

Side Gauge Wheel And Disk.............................................58

Seed Lok® (Option)..........................................................60

Press Wheels...............................................................62

1" x 12" Double "V" Press Wheel......................................62

6 1/2" Press Wheel Closing Disk.......................................64

6 1/2" Press Wheel Closing Disk Mount............................66

Decals...........................................................................68

Decal Location..................................................................68

Markers.........................................................................70

2515 Flat Fold Marker.......................................................70

1515 And 2015 Flat Fold Marker.......................................72

2015 Marker Carrier..........................................................74

Marker Disk (113-563S)....................................................76

Marker Disk (113-564S)....................................................78

Flat Fold Dual Marker Hydraulics......................................80

Marker Sequence Valve Hydraulics...................................82

Sequence Valve (810-197C).............................................84

Marker Hydraulic Cylinder (810-205C)..............................86

Midway Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C)..................................................................88

Cross Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C)..................................................................90

Monarch Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C)..................................................................92

Lift Assist.....................................................................94

Lift Assist...........................................................................94

Lift Assist Caster Wheels..................................................96

Lift Assist Hydraulics.........................................................98

Red Lion Lift Assist Hydraulic Cylinder (810-200C)........100

Midway Lift Assist Hydraulic Cylinder (810-200C)..........102

Lift Assist Decal Placement.............................................104

Part Number Index.....................................................106

© Copyright 2012 All rights reserved Printed 05/16/12

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

173-159P - 2 - 05/16/12

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

1

1" x 12" Double "V" Press Wheel.................................62

1515 And 2015 Feeder Cup Spacing...........................22

1515 And 2015 Flat Fold Marker..................................72

2

2015 Marker Carrier.....................................................74

2515 Feeder Cup Spacing...........................................24

2515 Flat Fold Marker..................................................70

6

6 1/2" Press Wheel Closing Disk..................................64

6 1/2" Press Wheel Closing Disk Mount.......................66

A

Adjustment Assembly...................................................52

B

Box Components............................................................8

Box To Frame.................................................................6

C

Cross Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C).............................................................90

D

Decal Location.............................................................68

Disk And Scraper.........................................................54

Dual Gauge Wheel.......................................................34

Dual Gauge Wheel Drive..............................................38

Dual Gauge Wheel To Drive.........................................36

Dual Non-Drive Gauge Wheel......................................42

Monarch Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C).............................................................92

N

Non-Drive Gauge Wheel Mount...................................44

P

Parallel Arm..................................................................46

Parking Stand...............................................................14

R

Red Lion Lift Assist Hydraulic Cylinder (810-200C)....100

S

Seed Level Indicator.....................................................12

Seed Lok® (Option).....................................................60

Seed Rate Handle........................................................20

Sequence Valve (810-197C)........................................84

Shank Assembly...........................................................50

Side Gauge Wheel.......................................................56

Side Gauge Wheel And Disk........................................58

Single Gauge Wheel....................................................28

Single Gauge Wheel Drive...........................................32

Single Gauge Wheel To Drive......................................30

Single Non-Drive Gauge Wheel...................................40

Spring Assembly..........................................................48

W

Walkboard And Ladder.................................................16

F

Feeder Cup Channel....................................................18

Flat Fold Dual Marker Hydraulics.................................80

L

Lid To Box.....................................................................10

Lift Assist......................................................................94

Lift Assist Caster Wheels.............................................96

Lift Assist Decal Placement........................................104

Lift Assist Hydraulics....................................................98

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel

116-283A)..............................................................26

M

Marker Disk (113-563S)...............................................76

Marker Disk (113-564S)...............................................78

Marker Hydraulic Cylinder (810-205C).........................86

Marker Sequence Valve Hydraulics..............................82

Midway Lift Assist Hydraulic Cylinder (810-200C).....102

Midway Marker Hydraulic Cylinder 2.5 X 20 X 1.12

(810-118C).............................................................88

05/16/12 - 3 - 173-159P

Table of Contents Part Number Index

173-159P - 4 - 05/16/12

Table of Contents Part Number Index

05/16/12 - 5 - 173-159P

Table of Contents Part Number Index

Box To Frame

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17706

173-159P - 6 - 05/16/12

Table of Contents Part Number Index

Box To Frame

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17706

For 1515.LH 15FT BOX & LID ASSY118-714L1.
For 2015.20' BOX& LID ASSY LH118-410L1.
For 2515.LH 24' BOX AND LID ASSY118-704L1.
For 1515.RH 15FT BOX & LID ASSY118-716L2.
For 2015.20' BOX& LID ASSY RH118-450L2.

For 2515.RH 24' BOX AND LID ASSY118-705L2.
HHCS 1/2-13X1 1/4 GR5802-034C3.
WASHER LOCK SPRING 1/2 PLT804-015C4.
NUT HEX 1/2-13 PLT803-020C5.
HHCS 5/8-11X3 GR5802-059C6.
WASHER LOCK SPRING 5/8 PLT804-022C7.
NUT HEX 5/8-11 PLT803-021C8.
15' 3PT BM MAIN FRAME WELDMENT173-129H9.
25' 3PT BM MAIN FRAME WELDMENT173-121H9.
20' 3PT BM MAIN FRAME WELDMENT173-130H9.
PIN HITCH 1 7/16 X 8 3/8 PLT805-168C10.
PIN HAIR COTTER .243 WIRE PLT805-167C11.
PIN HITCH 1 1/4 X 4 1/2805-119C12.
LIGHT HARNESS, 10' WISHBONE890-390C13.
LIGHT HARNESS, 5' LEAD890-640C14.
CABLE TIE .19X14.25 3DIA 50LB800-060C15.
3-PT SIDE PLAY BUSHING148-059D16.
CAT IV LOWER PIN SPACER173-169H17.
PIN CLEVIS 1 3/4 X 4 3/8 USABL805-291C18.
BM CAT IV-N 3PT HITCH PIN KIT173-171A19.
PIN HTCH 1X4 1/2 USLB W/KEEPER805-077C20.
BUSHING CYL 1 1/4 X 1 X 1890-005C21.
CAT II LOWER PIN BUSHING LONG173-166D22.
CAT II LOWER PIN BUSHING SHORT173-165D23.
PIN 1 1/8 X 7 1/2 USABLE805-215C24.
BM CAT II 3PT HITCH PIN KIT173-170A25.

Box and Frame

05/16/12 - 7 - 173-159P

Table of Contents Part Number Index

Box Components

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17707

173-159P - 8 - 05/16/12

Table of Contents Part Number Index

Box Components

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17707
SEED BOXPARTITION118-402D1.
BEARING CUTOUT COVER, 47 MST118-403D2.
SEED BOXIDLER COVER RH118-487D3.
SEED BOXIDLER COVER LH118-486D3.
HANDLE119-190D4.

Shown. RH side.DUAL AG LIGHTS RH890-312C5.

LH side.DUAL AG LIGHTS LH890-311C5.
HHCS 3/8-16X1 1/4 GR5802-079C6.
RHSNB 5/16-18X3/4 GR5802-092C7.
NUT HEX 1/2-10 ACME PLT803-203C8.
HFS 5/16-18X3/4 GR5802-387C9.
HFS 3/8-16X1 GR5802-388C10.
NUT LOCK 5/16-18 PLT803-011C11.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C12.
NUT HEX FLANGE 5/16-18 PLT803-199C13.
NUT FLANGE LOCK 3/8-16 PLT803-209C14.
WASHER FLAT3/8 USS PLT804-011C15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
12' EWNT LIGHT BRACKET150-138D17.
SCR HEX SELF TAP1/4-20X1TYPEF801-151C18.

For 1515.15' SEED BOX LH118-414H19.

For 1515.15' SEED BOX RH118-453H19.

For 2015.20' SEED BOX LH118-413H19.

For 2015.20' SEED BOX RH118-452H19.

For 2515.12' SEED BOX118-415H19.

Box and Frame

05/16/12 - 9 - 173-159P

Table of Contents Part Number Index

Lid To Box

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17708

173-159P - 10 - 05/16/12

Table of Contents Part Number Index

Lid To Box

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17708
LATCH CASTING MACHINED119-153D1.
LID HANDLE142-141D2.
LID 76 7/8 SEED119-230H3.
LID 106 SEED119-229H3.
LID 126 11/16 SEED119-231H3.
LID HINGE ASSEMBLYPS25120313-076S4.
HHCS 3/8-16X1 GR5802-017C5.
HHCS 5/16-18X1 1/4 NYL802-425C6.
NUT LOCK 5/16-18 PLT803-011C7.
NUT FLANGE LOCK 3/8-16 PLT803-209C8.
WASHER FLAT3/8 USS PLT804-011C9.
WASHER FLAT5/16 SAE PLT804-036C10.
SPRING .540 O.D.X 1 1/4 X.054W807-106C11.
12-20 X 90 LB GAS SPRING890-221C12.
BALL STUD 10MM X 5/16-18 X 1/2800-121C13.
LID HINGE PIVOT313-186D14.
LID HINGE BASE PLATE313-176D15.
RHSNB 3/8-16X2 GR5802-411C16.

Box and Frame

05/16/12 - 11 - 173-159P

Table of Contents Part Number Index

Seed Level Indicator

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17709

173-159P - 12 - 05/16/12

Table of Contents Part Number Index

Seed Level Indicator

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17709
SEED LEVEL ARM, 6 3/4R. TAB118-474H1.
SEED FLOAT DOWN FLOAT STOP118-498D2.
FOAM FLOAT197-089D3.
FOAM FLOATWASHER197-096D4.
HFS 10-24 X 1 1/8 PLTD801-096C5.
SCR HEX HD SHT MET #8 X 1/2801-154C6.
NUT HEX 10-24 PLT803-001C7.
NUT HEX NYLOCK 1/4-20803-255C8.
WASHER FLAT1/4 USS PLT804-075C9.
PIN COTTER 1/8 X 3/4805-067C10.
SEED LEVEL BUSHING817-086C11.
SEED LEVEL ARM MOUNT817-202C12.
SEED LEVEL INDICATOR817-350C13.
DECAL SEED LEVEL LH838-237C14.
CABLE 3/64 X 11 5/8 W/ EYELETS890-305C15.
WASHER INTERNAL STAR #10 PLT804-004C16.

Box and Frame

05/16/12 - 13 - 173-159P

Table of Contents Part Number Index

Parking Stand

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

13632

173-159P - 14 - 05/16/12

Table of Contents Part Number Index

Parking Stand

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg13632
U-BOLT 5/8-11 X 7 1/32 X 6 1/2806-053C1.
PIN SPIROL 3/8X2 1/2 PLAIN805-043C2.
FRAME STAND WELD401-005H3.
FRAME STAND MOUNT401-006H4.
PIN HITCH 1/2 X 3 USABLE LG805-002C5.
NUT HEX 5/8-11 PLT803-021C6.
WASHER LOCK SPRING 5/8 PLT804-022C7.

Obsolete.FRAME STAND HANDLE401-007H8.

Box and Frame

05/16/12 - 15 - 173-159P

Table of Contents Part Number Index

Walkboard And Ladder

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17756

173-159P - 16 - 05/16/12

Table of Contents Part Number Index

Walkboard And Ladder

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17756
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C1.
HHCS 3/8-16X1 1/4 GR5802-079C2.
3-PT STEP RETAINER119-032D3.
WASHER LOCK SPRING 3/8 PLT804-013C4.
NUT HEX 3/8-16 PLT803-014C5.
WALKBOARDSUPPORT BRACKET119-225D6.
WASHER LOCK SPRING 1/2 PLT804-015C7.
NUT HEX 1/2-13 PLT803-020C8.

For 1515.WALKBOARD3 PT 15'119-155D9.

For 2015.WALKBOARD3PT 20'119-156D9.

For 2515.WALKBOARD3PT 12'119-203D9.
WASHER FLAT3/8 USS PLT804-011C10.

Shown.BM WALKBOARD END BRACKET RH119-265H11.
BM WALKBOARD END BRACKET LH119-266H11.
WASHER FLAT1/2 USS PLT804-017C12.
HHCS 3/8-16X1 GR5802-017C13.
NUT FLANGE LOCK 3/8-16 PLT803-209C14.
WASHER FLAT3/8 SAE PLT804-012C15.
HHCS 3/8-16X1 1/2 GR5802-022C16.
NUT LOCK 3/8-16 NYLON INSERT803-078C17.
3PT BM LADDER WELDMENT173-109H18.
3PT BM LADDER MOUNT BRACKET173-107D19.

Box and Frame

05/16/12 - 17 - 173-159P

Table of Contents Part Number Index

Feeder Cup Channel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17757

173-159P - 18 - 05/16/12

Table of Contents Part Number Index

Feeder Cup Channel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17757
FEEDER CUP CHANNEL1.

SHAFT2.

SPACER3.

BEARING HUB 40A15118-508D4.
FEEDER CUP BEARING HOUSING118-336D5.
SNAP RING EXT BASIC 1 3/16800-004C6.
SNAP RING INTERNAL 2.165800-107C7.
BRG 30IDX55OD MM822-103C8.
FEEDER CUP BEARING ASSEMBLY118-226S9.
HHCS 1/4-20X3/4 GR5802-004C10.
3PT BM SEED BOX DIVIDER CLIP173-123D11.
NUT HEX WHIZ 1/4-20 PLT803-194C12.
SEED CUP ASSEMBLY817-075C13.
SEED CUP SLEEVE817-074C14.
PM SEED CUP SPROCKET890-190C15.
WASHER RETAINING804-031C16.
DIVIDER17.

SCREW SET 5/16-18 SKT KP X 3/8801-035C18.
5/8 SHAFT LOCKING COLLAR890-350C19.
HHCS 3/8-16X3/4 GR5802-014C20.
WASHER LOCK SPRING 3/8 PLT804-013C21.
SCR SELF TAP 8X3/8 TYPE25 BT801-057C22.
NYLON WASHER-SPLIT817-004C23.
SEED CUP WASHER RETAINER817-073C24.
SEED CUP LEFT HALF817-068C25.
SEED CUP RIGHT HALF817-069C26.
SEED CUP ADJUSTMENT HANDLE817-071C27.
SEED CUP DOOR817-070C28.
HFSS 1/4-20X5/8 GR5802-196C29.
NUT HEX LOCK 1/4-20 FLG803-088C30.
FLEX COUPLER HUB & PIN BRACKET118-623H31.
COUPLER PIN118-505D32.
FLEX COUPLER CENTER SLIDE118-504D33.
PIN COTTER 1/8 X 3/4805-067C34.
FLEX COUPLER ASSEMBLY118-685S35.
WASHER FLAT3/8 SAE PLT804-012C36.

See "1515 And 2015 Feeder Cup

Spacing" and "2515 Feeder Cup
Spacing"

See "1515 And 2015 Feeder Cup

Spacing" and "2515 Feeder Cup
Spacing"

See "1515 And 2015 Feeder Cup

Spacing" and "2515 Feeder Cup
Spacing"

See "1515 And 2015 Feeder Cup

Spacing" and "2515 Feeder Cup
Spacing"

Metering

05/16/12 - 19 - 173-159P

Table of Contents Part Number Index

Seed Rate Handle

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17758

173-159P - 20 - 05/16/12

Table of Contents Part Number Index

Seed Rate Handle

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17758
SEED RATE ADJ WLDMNT118-444H1.
SEED RATE ADJ HANDLE WLDMNT118-443H2.
ADJ LOCK PLATE ASS'Y - 1 1/2 W109-025H3.
NAME PLATE ADJ. GUIDE LONG819-001C4.
NUT WING 1/2-13 PLT803-016C5.
WASHER ADJ HANDLE BRG804-001C6.
BRG BALL 17IDX40OD 6203822-008C7.
SNAP RING EXT 17 MM800-003C8.
HHCS 3/8-16X3/4 GR5802-014C9.
WASHER LOCK SPRING 3/8 PLT804-013C10.
WASHER FLAT5/8 SAE PLT804-021C11.
WASHER MACH 1.19 X .63 X 18GA804-040C12.
PIN COTTER 3/16 X 1 1/4 PLT805-016C13.
ADJUSTMENT HANDLE PIVOT109-069D14.
HHCS 5/16-18X3/4 GR5802-007C15.
WASHER FLAT5/16 SAE PLT804-036C16.
WASHER LOCK SPRING 5/16 PLT804-009C17.
NUT HEX 5/16-18 PLT803-008C18.
SCREW RD HD 8-32 X 3/8 BRASS801-001C19.
WASHER FLAT#8 BRASS804-003C20.
WASHER INTERNAL STAR #8 BRASS804-002C21.
NUT HEX 8-32 BRASS803-035C22.
WASHER FLAT3/8 SAE PLT804-012C23.
MACHINED ADJUSTMENT SPOOL109-091D24.
5/8 SHAFT LOCKING COLLAR890-350C25.
PIN ROLL 3/16X1 1/4 PLT805-023C26.
SCREW SET 5/16-18 SKT KP X 3/8801-035C27.

Metering

05/16/12 - 21 - 173-159P

Table of Contents Part Number Index

1515 And 2015 Feeder Cup Spacing

(Applies to 1515 Soybean Machine, 2015 Soybean Machine only)

17759

173-159P - 22 - 05/16/12

Table of Contents Part Number Index

1515 And 2015 Feeder Cup Spacing

(Applies to 1515 Soybean Machine, 2015 Soybean Machine only)

Image No.dwg17759
15'3PT BM FEDRCUP TRAY ASY RH118-698K1.
5/8 SHAFT LOCKING COLLAR890-350C2.
SCREW SET 5/16-18 SKT KP X 3/8801-035C3.
13 BOXDIVIDER FOR 15 ROW173-105D4.
SPACER TUBE X 11.590173-102D5.
15'3PT FEEDERCUP TRAY 15 RH118-515D6.
3PT BM SEED BOX DIVIDER CLIP173-123D7.
SQ BAR 5/8 CR X 88 17/32118-451D8.
15'3PT BM FEDRCUP TRAY ASY LH118-697K9.
PIN ROLL 3/16X1 1/4 PLT805-023C10.
14 BOXDIVIDER FOR 16 ROW118-518D11.
12 BOXDIVIDER FOR 14 ROW118-519D12.
15'3PT FEEDERCUP TRAY 15 LH118-516D13.
HHCS 3/8-16X3/4 GR5802-014C14.
WASHER FLAT3/8 SAE PLT804-012C15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
NUT HEX 3/8-16 PLT803-014C17.
20' 3PT BM FEDRCUP TRAYASY RH118-710K18.
SQ BAR 5/8 CR X 111 1/16173-099D19.
20' 3PT FEEDERCUP TRAY 15 RH118-520D20.
20' 3PT BM FEDRCUP TRAYASY LH118-709K21.
WASHER RETAINING804-031C22.
20' 3PT FEEDERCUP TRAY 15 LH118-521D23.

Metering

RevisionCommentsPart DescriptionPart No.Ref.

05/16/12 - 23 - 173-159P

Table of Contents Part Number Index

2515 Feeder Cup Spacing

(Applies to 2515 Soybean Machine only)

17760

173-159P - 24 - 05/16/12

Table of Contents Part Number Index

2515 Feeder Cup Spacing

(Applies to 2515 Soybean Machine only)

Image No.dwg17760
25' 3PT BM FEDRCUP TRAYASY RH118-712K1.
5/8 SHAFT LOCKING COLLAR890-350C2.
SCREW SET 5/16-18 SKT KP X 3/8801-035C3.
SPACER TUBE X 11.590173-102D4.
SPACER TUBE X 10.578118-525D5.
13 BOXDIVIDER FOR 15 ROW173-105D6.
12 BOXDIVIDER FOR 14 ROW118-519D7.
25' 3PT FEEDERCUP TRAY 15 RH118-522D8.
3PT BM SEED BOX DIVIDER CLIP173-123D9.
PIN ROLL 3/16X1 1/4 PLT805-023C10.
SQ. BAR 5/8 CR X 139 21/32118-492D11.
25' 3PT BM FEDRCUP TRAYASY LH118-711K12.
WASHER RETAINING804-031C13.
25' 3PT FEEDERCUP TRAY 15 LH118-523D14.

Metering

RevisionCommentsPart DescriptionPart No.Ref.

05/16/12 - 25 - 173-159P

Table of Contents Part Number Index

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

34220

173-159P - 26 - 05/16/12

Table of Contents Part Number Index

Loop Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg34220
HFSS 1/4-20X3/4 GR5802-257C1.
HOSE CLIP 5/8 I.D.800-052C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
CABLE TIE, NYLON7700264.
MAGNET, ADHESIVE BACKED, LARGE5400175.
NUT HEX JAM, PLASTIC M16 X 27104256.
SHAFT SENSOR MOUNT116-019D7.
SCR SELF TAP #10 X 3/4801-199C8.
LOUP SHAFT SENSOR 2&3 CHANNEL2531009.
SMALL CUP SENSOR MOUNT116-020D10.
LOUP 3 CHANNEL SHAFT MONITOR25301711.
LOUP 2 CHANNEL SHAFT MONITOR25301612.
SHAFT MONITOR EXT. 30' 6P WP833-595C13.
HARNESS 3 SHAFT MONITOR LOUP31895114.
LOUP 3 CHANNEL SHAFT MONITOR25301715.
SHAFT MONITOR EXT. 25' 4P WP833-596C16.
HARNESS 2 SHAFT MONITOR LOUP31891717.

Metering

05/16/12 - 27 - 173-159P

Table of Contents Part Number Index

Single Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17734

173-159P - 28 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Single Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17734
HUB 6-BOLT 2 BORE 4.62 PILOT120-195D1.
GAUGE WHEEL ARM CHAIN GUARD120-197D2.
AXLE SPACER TUBE120-198D3.
GAUGE WHEEL ARM120-208H4.
TWO PIN IDLER WELDMENT120-212H5.
RPBY 120-314A120-224D6.
G.W.ARM EXTENDED CHAIN GUARD120-230D7.
GREASE ZERK STRAIGHT 1/4-28800-001C8.
SCREW SQ HD 5/8-11X3 1/2 GR5801-059C9.
HHCS 1/4-20X5/8 GR5802-078C10.
BOLT WHEEL 1/2-20X1 90-DEG802-104C11.
HHCS 1/2-13X1 GR5802-258C12.
NUT LOCK 1/2-13 PLT803-019C13.
NUT HEX JAM 5/8-11 PLT803-023C14.
NUT BRG LOCK, TN-10803-208C15.
WASHER LOCK SPRING 1/4 PLT804-006C16.
WASHER FLAT1/4 SAE PLT804-007C17.
WASHER BRG LOCK, TW110804-098C18.
PIN SPIROL 1/2X2 1/2 PLAIN805-037C19.
PIN COTTER 1/8 X 3/4805-067C20.
PIN ROLL 5/16 X 2 1/2 PLT805-125C21.
SPKT 40B19X2B W/5/16 HOLE808-097C22.
SEAL 3.375 X 2.0 X.438 CR20125816-012C23.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C24.
NO. 40 12T IDLER SPKT.817-025C25.
BRG CONE 2.00ID TIM33889822-117C26.
VALVE STEM TR415X.625X1 1/4 LG816-035C27.
WHEEL 8 X 15 X 6 BOLT814-008C28.

1515 only.RPBY 814-011C814-026C29.

2015 only.TIRE TITAN 11L-15 X 8 PLY814-178C29.
6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K30.

TITAN TIRE 11L-15 8 PLY 6 BLT197-148K30.

BRG CUP 3.75OD TIM33821822-118C31.

1515 only. Includes items 27, 28 and

29.

2015 only. Includes items 27, 28 and

29.

05/16/12 - 29 - 173-159P

Table of Contents Part Number Index

Single Gauge Wheel To Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17737

173-159P - 30 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Single Gauge Wheel To Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17737
PIN,3/4X3 1/4 USE W/3/16 HOLES120-229D1.
SPACER TUBE 1 ID X 2 13/16120-263D2.
SPACER TUBE 1 ID X 1 3/16120-264D3.
SPACER TUBE 1 ID X 4 11/16120-265D4.
GAUGE WHEEL UPPR SHAFT 7/8 HEX120-268D5.

Includes items 25, 26 and 27.3 BOLT PIVOT BEARING ASSY120-269S6.

Includes items 21 through 24.GAUGE WHEEL LINK ASSEMBLY173-164S7.
COLLAR LOCK 7/8 HEX402-058D8.
SCREW SET 5/16-18 SKT KP X 3/8801-035C9.
HHCS 5/8-11X2 1/2 GR5802-058C10.
HHCS 1/2-13X1 3/4 GR5802-082C11.
NUT HEX 1/2-13 PLT803-020C12.
NUT HEX NYLOCK 5/8-11 PLT803-148C13.
WASHER LOCK SPRING 1/2 PLT804-015C14.
WASHER FLAT5/8 USS PLT804-019C15.
WASHER FLAT3/4 USS PLT804-024C16.
PIN COTTER 5/32 X 1 1/4 LG805-045C17.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C18.
SPKT 40C19 X 7/8 HEX BORE808-149C19.
SPKT 40C30 X 7/8 HEX BORE808-156C20.
ADJUSTMENT TUBE EYE BOLT120-213H21.
ADJUSTMENT TUBE WLDMT120-214H22.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C23.
GAUGE WHEEL LINK UPPER CLEVIS173-163E24.
SNAP RING INT. 2.05 OD800-038C25.
BEARING .880 HEX BORE 205DD188-006V26.
3 BOLT PIVOT CAST W/BRG SEAT120-188D27.
CHAIN RL #40 107 PITCHES136-100D28.

05/16/12 - 31 - 173-159P

Table of Contents Part Number Index

Single Gauge Wheel Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17736

173-159P - 32 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Single Gauge Wheel Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17736
GAUGE WHEEL BRAKE120-211H1.
SPACER TUBE 1 ID X 2 13/16120-263D2.
SPACER TUBE 1 ID X 7 1/8120-267D3.
SPEED CHANGE DRIVESHAFT 7/8HEX120-270D4.
BM FDR CUP DRIVE SHAFT 7/8HEX120-271D5.
3PT BM GAUGE WHEEL MOUNT DRV173-122H6.

Includes items 31, 34, 35 and 36.OFFSET DOUBLE IDLER ASSY, SPKT402-134S7.
IDLER BOLT PLATE402-242D8.
RHSNB 5/16-18X1 1/4 GR5802-009C9.
HHCS 1/2-13X4 GR5802-044C10.
HHCS 1/2-13X1 3/4 GR5802-082C11.
RHSNB 3/8-16X1 3/4 GR5802-252C12.
NUT HEX 1/2-13 PLT803-020C13.
NUT HEX 3/4-10 PLT803-027C14.
NUT HEX JAM 1/2-13 PLT803-036C15.
803-184 FLG TP LK 5/16-18ZNYCR803-177C16.
NUT FLANGE LOCK 3/8-16 PLT803-209C17.
WASHER LOCK SPRING 1/2 PLT804-015C18.
WASHER FLAT1/2 USS PLT804-017C19.
WASHER LOCK SPRING 3/4 PLT804-023C20.
WASHER MACH 1.50 X 1.00 X 18GA804-061C21.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C22.
PIN LINCH 3/16 X 1 9/16 LONG805-240C23.
U-BOLT 3/4-10 X 7 1/32 X 7 3/4806-121C24.
SPKT 40B12 7/8 HEX BORE W/SS808-143C25.
SPKT 40C15 X 7/8 HEX BORE808-147C26.
SPKT 40C24 X 7/8 HEX BORE808-151C27.
SPKT 40C36 X 7/8 HEX BORE808-251C28.
SPKT 40C37 X 7/8 HEX BORE808-252C29.
SPKT 40C47 X 7/8 HEX BORE808-262C30.
NO. 40 12T IDLER SPKT.817-025C31.
BRG 7/8HEXX2.05OD SPH822-119C32.
FLANGETTE 52 3-BOLT PLT822-175C33.
PIN COTTER 7/64 X 1 LONG805-064C34.
WASHER FLAT1/2 SAE PLT804-016C35.
OFFSET DOUBLE IDLER WELDMENT402-126H36.
CHAIN RL #40 84 PITCHES136-023D37.
CHAIN RL #40 100 PITCHES136-110D38.
CHAIN RL #40 108 PITCHES136-150D39.

05/16/12 - 33 - 173-159P

Table of Contents Part Number Index

Dual Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17735

173-159P - 34 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Dual Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17735
RPBY 120-315A120-192D1.
HUB 6-BOLT 2 BORE 4.62 PILOT120-195D2.
GAUGE WHEEL ARM CHAIN GUARD120-197D3.
AXLE SPACER TUBE120-198D4.
GAUGE WHEEL ARM120-208H5.
TWO PIN IDLER WELDMENT120-212H6.
G.W.ARM EXTENDED CHAIN GUARD120-230D7.
GREASE ZERK STRAIGHT 1/4-28800-001C8.
SCREW SQ HD 5/8-11X3 1/2 GR5801-059C9.
HHCS 1/4-20X5/8 GR5802-078C10.
BOLT WHEEL 1/2-20X1 90-DEG802-104C11.
HHCS 1/2-13X1 GR5802-258C12.
NUT LOCK 1/2-13 PLT803-019C13.
NUT HEX JAM 5/8-11 PLT803-023C14.
NUT BRG LOCK, TN-10803-208C15.
WASHER LOCK SPRING 1/4 PLT804-006C16.
WASHER FLAT1/4 SAE PLT804-007C17.
WASHER BRG LOCK, TW110804-098C18.
PIN SPIROL 1/2X2 1/2 PLAIN805-037C19.
PIN COTTER 1/8 X 3/4805-067C20.
PIN ROLL 5/16 X 2 1/2 PLT805-125C21.
SPKT 40B19X2B W/5/16 HOLE808-097C22.
SEAL 3.375 X 2.0 X.438 CR20125816-012C23.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C24.
NO. 40 12T IDLER SPKT.817-025C25.
BRG CONE 2.00ID TIM33889822-117C26.
VALVE STEM TR415X.625X1 1/4 LG816-035C27.
WHEEL 8 X 15 X 6 BOLT814-008C28.

For 2015 and 2515.TIRE TITAN 11L-15 X 8 PLY814-178C29.

For 1515.RPBY 814-011C814-026C30.
TITAN TIRE 11L-15 8 PLY 6 BLT197-148K31.

6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K32.

Includes items 27, 28 and 29. For

2015 and 2515.

Includes items 27, 28 and 29. For

1515.

05/16/12 - 35 - 173-159P

Table of Contents Part Number Index

Dual Gauge Wheel To Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17738

173-159P - 36 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Dual Gauge Wheel To Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17338
PIN,3/4X3 1/4 USE W/3/16 HOLES120-229D1.
SPACER TUBE 1 ID X 2 13/16120-263D2.
SPACER TUBE 1 ID X 1 3/16120-264D3.
SPACER TUBE 1 ID X 4 11/16120-265D4.
GAUGE WHEEL UPPR SHAFT 7/8 HEX120-268D5.

Includes items 21, 22 and 23.3 BOLT PIVOT BEARING ASSY120-269S6.

Includes items 24, 25, 26 and 27.GAUGE WHEEL LINK ASSEMBLY173-164S7.
COLLAR LOCK 7/8 HEX402-058D8.
SCREW SET 5/16-18 SKT KP X 3/8801-035C9.
HHCS 5/8-11X2 1/2 GR5802-058C10.
HHCS 1/2-13X1 3/4 GR5802-082C11.
NUT HEX 1/2-13 PLT803-020C12.
NUT HEX NYLOCK 5/8-11 PLT803-148C13.
WASHER LOCK SPRING 1/2 PLT804-015C14.
WASHER FLAT5/8 USS PLT804-019C15.
WASHER FLAT3/4 USS PLT804-024C16.
PIN COTTER 5/32 X 1 1/4 LG805-045C17.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C18.
SPKT 40C19 X 7/8 HEX BORE808-149C19.
SPKT 40C30 X 7/8 HEX BORE808-156C20.
SNAP RING INT. 2.05 OD800-038C21.
BEARING .880 HEX BORE 205DD188-006V22.
3 BOLT PIVOT CAST W/BRG SEAT120-188D23.
ADJUSTMENT TUBE EYE BOLT120-213H24.
ADJUSTMENT TUBE WLDMT120-214H25.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C26.
GAUGE WHEEL LINK UPPER CLEVIS173-163E27.
CHAIN RL #40 107 PITCHES136-100D28.

05/16/12 - 37 - 173-159P

Table of Contents Part Number Index

Dual Gauge Wheel Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17742

173-159P - 38 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Dual Gauge Wheel Drive

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17742
GAUGE WHEEL BRAKE120-211H1.
SPACER TUBE 1 ID X 2 13/16120-263D2.
SPACER TUBE 1 ID X 7 1/8120-267D3.
SPEED CHANGE DRIVESHAFT 7/8HEX120-270D4.
BM FDR CUP DRIVE SHAFT 7/8HEX120-271D5.
3PT BM GAUGE WHEEL MOUNT DRV173-122H6.

Includes items 31, 34, 35 and 36.OFFSET DOUBLE IDLER ASSY, SPKT402-134S7.
IDLER BOLT PLATE402-242D8.
RHSNB 5/16-18X1 1/4 GR5802-009C9.
HHCS 1/2-13X4 GR5802-044C10.
HHCS 1/2-13X1 3/4 GR5802-082C11.
RHSNB 3/8-16X1 3/4 GR5802-252C12.
NUT HEX 1/2-13 PLT803-020C13.
NUT HEX 3/4-10 PLT803-027C14.
NUT HEX JAM 1/2-13 PLT803-036C15.
803-184 FLG TP LK 5/16-18ZNYCR803-177C16.
NUT FLANGE LOCK 3/8-16 PLT803-209C17.
WASHER LOCK SPRING 1/2 PLT804-015C18.
WASHER FLAT1/2 USS PLT804-017C19.
WASHER LOCK SPRING 3/4 PLT804-023C20.
WASHER MACH 1.50 X 1.00 X 18GA804-061C21.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C22.
PIN LINCH 3/16 X 1 9/16 LONG805-240C23.
U-BOLT 3/4-10 X 7 1/32 X 7 3/4806-121C24.
SPKT 40B12 7/8 HEX BORE W/SS808-143C25.
SPKT 40C15 X 7/8 HEX BORE808-147C26.
SPKT 40C24 X 7/8 HEX BORE808-151C27.
SPKT 40C36 X 7/8 HEX BORE808-251C28.
SPKT 40C37 X 7/8 HEX BORE808-252C29.
SPKT 40C47 X 7/8 HEX BORE808-262C30.
NO. 40 12T IDLER SPKT.817-025C31.
BRG 7/8HEXX2.05OD SPH822-119C32.
FLANGETTE 52 3-BOLT PLT822-175C33.
OFFSET DOUBLE IDLER WELDMENT402-126H34.
WASHER FLAT1/2 SAE PLT804-016C35.
PIN COTTER 7/64 X 1 LONG805-064C36.
CHAIN RL #40 100 PITCHES136-110D37.
CHAIN RL #40 84 PITCHES136-023D38.
CHAIN RL #40 108 PITCHES136-150D39.

05/16/12 - 39 - 173-159P

Table of Contents Part Number Index

Single Non-Drive Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17772

173-159P - 40 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Single Non-Drive Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17772
HUB 6-BOLT 2 BORE 4.62 PILOT120-195D1.
GAUGE WHEEL ARM CHAIN GUARD120-197D2.
AXLE SPACER TUBE120-198D3.
GAUGE WHEEL ARM120-208H4.
RPBY 120-314A120-224D5.
GREASE ZERK STRAIGHT 1/4-28800-001C6.
HHCS 1/4-20X5/8 GR5802-078C7.
BOLT WHEEL 1/2-20X1 90-DEG802-104C8.
NUT BRG LOCK, TN-10803-208C9.
WASHER LOCK SPRING 1/4 PLT804-006C10.
WASHER FLAT1/4 SAE PLT804-007C11.
WASHER BRG LOCK, TW110804-098C12.
PIN SPIROL 1/2X2 1/2 PLAIN805-037C13.
SEAL 3.375 X 2.0 X.438 CR20125816-012C14.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C15.
BRG CONE 2.00ID TIM33889822-117C16.
VALVE STEM TR415X.625X1 1/4 LG816-035C17.
WHEEL 8 X 15 X 6 BOLT814-008C18.
RPBY 814-011C814-026C19.

Includes items 17, 18 and 19.6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K20.

05/16/12 - 41 - 173-159P

Table of Contents Part Number Index

Dual Non-Drive Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17739

173-159P - 42 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Dual Non-Drive Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17739
RPBY 120-315A120-192D1.
HUB 6-BOLT 2 BORE 4.62 PILOT120-195D2.
GAUGE WHEEL ARM CHAIN GUARD120-197D3.
AXLE SPACER TUBE120-198D4.
GAUGE WHEEL ARM120-208H5.
GREASE ZERK STRAIGHT 1/4-28800-001C6.
HHCS 1/4-20X5/8 GR5802-078C7.
BOLT WHEEL 1/2-20X1 90-DEG802-104C8.
NUT BRG LOCK, TN-10803-208C9.
WASHER LOCK SPRING 1/4 PLT804-006C10.
WASHER FLAT1/4 SAE PLT804-007C11.
WASHER BRG LOCK, TW110804-098C12.
PIN SPIROL 1/2X2 1/2 PLAIN805-037C13.
SEAL 3.375 X 2.0 X.438 CR20125816-012C14.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C15.
BRG CONE 2.00ID TIM33889822-117C16.
VALVE STEM TR415X.625X1 1/4 LG816-035C17.
WHEEL 8 X 15 X 6 BOLT814-008C18.
RPBY 814-011C814-026C19.

Includes items 17, 18 and 19.6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K20.

05/16/12 - 43 - 173-159P

Table of Contents Part Number Index

Non-Drive Gauge Wheel Mount

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17767

173-159P - 44 - 05/16/12

Table of Contents Part Number Index

Gauge Wheels and Drives

Non-Drive Gauge Wheel Mount

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17767
3 BOLT PIVOT CAST MACHINED120-223D1.
PIN,3/4X3 1/4 USE W/3/16 HOLES120-229D2.
3PT GW LINK ASSEMBLY120-245S3.
3PT BM GAUGE WHEEL MNT NONDRV173-143H4.
HHCS 5/8-11X2 GR5802-055C5.
HHCS 1/2-13X1 3/4 GR5802-082C6.
NUT HEX 1/2-13 PLT803-020C7.
NUT HEX 3/4-10 PLT803-027C8.
NUT HEX NYLOCK 5/8-11 PLT803-148C9.
WASHER LOCK SPRING 1/2 PLT804-015C10.
WASHER LOCK SPRING 3/4 PLT804-023C11.
WASHER FLAT3/4 USS PLT804-024C12.
PIN COTTER 5/32 X 1 1/4 LG805-045C13.
U-BOLT 3/4-10 X 7 1/32 X 7 3/4806-121C14.
ADJUSTMENT TUBE EYE BOLT120-213H15.
ADJUSTMENT TUBE WLDMT120-214H16.
UPPER GAUGEWHEEL CLEVIS120-001E17.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C18.

05/16/12 - 45 - 173-159P

Table of Contents Part Number Index

Parallel Arm

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17797

173-159P - 46 - 05/16/12

Table of Contents Part Number Index

Parallel Arm

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17797
MOUNT, UNIT404-151D1.
HHCS 5/8-11X2 GR5802-055C2.
U-BOLT 5/8-11 X 7 1/32 X 6806-131C3.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C4.

Used at gauge wheel mounts.HHCS 5/8-11X7 1/2 GR5802-146C5.
WASHER FLAT5/8 HARD ASTMF436804-095C6.
PARALLEL ARM PIVOT TUBE404-147D7.
PARALLEL ARM WELD404-078H8.
EXTENDED OPENER MOUNT WELDMENT404-095H9.
TOP PARALLELARM WELD404-083H10.
UP-DOWN STOP404-118D11.
RHSNB 3/8-16X1 1/4 GR5802-155C12.

Row Units

05/16/12 - 47 - 173-159P

Table of Contents Part Number Index

Spring Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17648

173-159P - 48 - 05/16/12

Table of Contents Part Number Index

Spring Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17648
PIN COTTER 1/4 X 2 PLT805-021C1.
WASHER FLAT1 SAE804-029C2.
EYE-BOLT 1/2-13 PLT802-655C3.

For 173-150S.SPRING PLUG CASTING204-017D4.

For 406-006S.SPRING PLUG .250 DIA.406-010D4.

For 173-150S.SPRING HOLD DOWN HD COULTER807-055C5.

For 406-006S.SPRING EXT 2.21ODX.262X6.0807-178C5.
DOWN PRESSURE SPRING ASSY .262406-006S6.
DOWN PRESSURE SPRING ASSY .312173-150S6.
PIN CLEVIS 3/8 X 3 3/4 PLT805-277C7.
SPRING .540 O.D.X 1 1/4 X.054W807-106C8.
SHAFT, SPRING MOUNT404-148D9.
GUIDE WELD404-084H10.
T-HANDLE ASSEMBLY817-328C11.
PIN ROLL 5/32 X 5/8 PLT805-186C12.

Row Units

05/16/12 - 49 - 173-159P

Table of Contents Part Number Index

Shank Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17798

173-159P - 50 - 05/16/12

Table of Contents Part Number Index

Shank Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17798
RPBY 817-606C817-139C1.
PIN CLEVIS 1/4 X 2 1/2 PLT805-278C2.
PIN COTTER 3/32 X 1 LONG805-063C3.
PIN ROLL 5/16 X 7/8805-250C4.
SHIELD,DISK404-139D5.
NUT HEX WHIZ 5/16-18 PLT803-043C6.
RHSNB 5/16-18X3/4 GR5802-092C7.
BRACE WELDMENT404-112H8.
HHCS 3/8-16X1 GR5802-017C9.
WASHER LOCK SPRING 3/8 PLT804-013C10.
ADJUSTMENT ASSY404-014S11.

SHANK WELD404-082H12.
SNAP RING EXT 5/8 .050 T800-118C13.
PIN, DEPTH CONTROL404-138D14.
BM SEED HOSE MOUNT173-163D15.
END WHEEL FERTILIZER HOSE816-037C16.

Refer to "Adjustment Assembly" for

breakdown.

Row Units

05/16/12 - 51 - 173-159P

Table of Contents Part Number Index

Adjustment Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

14848

173-159P - 52 - 05/16/12

Table of Contents Part Number Index

Adjustment Assembly

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg14848
PLANTER HANDLE404-020D1.
WALKBEAM404-077D2.
WALKBEAM MOUNT404-078D3.
WALKBEAM PIVOT PIN404-079D4.
WASHER 3/4 X 17/32 X 18 GA PLT804-100C5.
PIN COTTER 3/32 X 1 LONG805-063C6.
PIN ROLL 5/32 X 1 1/2 PLT805-290C7.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C8.
SPRING COMP .72 X 1.5 X .072WD807-119C9.

Row Units

05/16/12 - 53 - 173-159P

Table of Contents Part Number Index

Disk And Scraper

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17650

173-159P - 54 - 05/16/12

Table of Contents Part Number Index

Disk And Scraper

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17650
HHCS 5/8-11X1 1/2 GR5 NYL802-228C1.
DD BRG FLANGE DUST COVER107-111D2.
RPBY 404-121S404-072S3.

RPBY 812-272C404-163D4.
PIN ROLL 5/16 X 3/4 PLT805-280C5.
WASHER MACH 1.19 X .63 X 18GA804-040C6.
SCRAPER, DISC LH404-153D7.
NUT HEX WHIZ 5/16-18 PLT803-043C8.
RHSNB 5/16-18X3/4 GR5802-092C9.
SCRAPER, DISC RH404-152D10.

Referto"Side Gauge Wheel AndDisk"

for breakdown.

Row Units

05/16/12 - 55 - 173-159P

Table of Contents Part Number Index

Side Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17799

173-159P - 56 - 05/16/12

Table of Contents Part Number Index

Side Gauge Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17799
HHCS 5/8-11 X 3 GR8802-646C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
4 X 16 GAUGE TIRE ASSY-PLASTIC814-173C3.

WASHER MACH 1.19 X .63 X 18GA804-040C4.
ARM, GAUGEWHEEL404-155D5.
HFS 1/2-13 X 1 1/2 GR8 NYL PLT802-663C6.
PIN ROLL 1/8 X 3/8 PLT805-289C7.
RPBY 812-327C404-173D8.
O-RING 1 1/4ID X 1 1/2ODX1/8816-315C9.
O-RING BUSHING404-171D10.
HHCS 1/2-13X3 GR5802-039C11.
WASHER LOCK SPRING 1/2 PLT804-015C12.
NUT HEX 1/2-13 PLT803-020C13.
GREASE ZERK STRAIGHT 1/4-28800-001C14.
ECCENTRIC BUSHING404-174D15.
SPINDLE, GA WHL MNT ADJ404-119D16.
SCRW SET SQ HD1/2-13X2 GR5 PLT801-046C17.
RPBY 812-327C404-109S18.

Referto"Side Gauge Wheel AndDisk"

for breakdown.

Row Units

05/16/12 - 57 - 173-159P

Table of Contents Part Number Index

Side Gauge Wheel And Disk

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17652

173-159P - 58 - 05/16/12

Table of Contents Part Number Index

Side Gauge Wheel And Disk

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17652
HFSS 5/16-18X1 GR5 PLT802-431C1.
HFSS 5/16-18X1 3/4 GR5802-094C2.
4 X 16 GAUGE WHEEL RIM HALF817-331C3.
4 1/2 X 16 GAUGE TIRE814-113C4.
BRG .63ID PRESS WHL ASY822-170C5.
4 X 16 GAUGE WHEEL RIM814-175C6.
803-184 FLG TP LK 5/16-18ZNYCR803-177C7.
4 X 16 GAUGE TIRE ASSY-PLASTIC814-173C8.
RIVET,BUTTON HEAD 1/4 X 1/2800-213C9.
HSG RIBB FLG 6BOLT PLT890-466C10.
BEARING AA205DD188-001V11.
RPBY 820-287C820-200C12.
RPBY 404-121S404-072S13.

Row Units

05/16/12 - 59 - 173-159P

Table of Contents Part Number Index

Seed Lok® (Option)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17663

173-159P - 60 - 05/16/12

Table of Contents Part Number Index

Seed Lok® (Option)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17663
PIN COTTER 5/32 X 1 1/4 LG805-045C1.
LEVER, SEED LOK404-213D2.
SPRING .540 O.D.X 1 1/4 X.054W807-106C3.
LOCK ROD WELD404-088H4.
SEED LOK MOUNT404-144D5.
RHSNB 5/16-18X3/4 GR5802-092C6.
NUT HEX WHIZ 5/16-18 PLT803-043C7.
JD KINZE SEED LOK LOWER MOUNT206-010D8.
SNAP RING 1/2 EXTERNAL HEAVY800-166C9.
SEED LOK WHEEL ARM404-061D10.
SCR HX SKT BUT CP 3/8-16X3/4801-078C11.
WASHER INTERNAL STAR 3/8 PLT.804-078C12.
BRG 203 SEED-LOK WITH PIN188-008V13.
SCR PH THD FMG #10X1/2 TP ZP801-084C14.
RETAINER W/BONDED SEAL 4BLT816-173C15.
5/8 X 6 SEED LOK WHEEL817-191C16.
6 SEED LOK ASSEMBLY206-014S17.
WASHER 1.5 X .51 X .187804-112C18.
SPRING EXT 1 X 4 X .135 WD807-125C19.
SEED LOK PIVOT PIN206-011D20.
LEVER STOP404-212D21.

Row Units

05/16/12 - 61 - 173-159P

Table of Contents Part Number Index

1" x 12" Double "V" Press Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17653

173-159P - 62 - 05/16/12

Table of Contents Part Number Index

1" x 12" Double "V" Press Wheel

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17653
1 X 12 PRESS WHL ASSY-5203BRG814-174C1.
NUT HEX LOCK 1/4-20 FLG803-088C2.
1 X 12 PRESS WHEEL RIM HALF817-330C3.
TIRE RUBBER 1 X 12814-034C4.
BRG .63ID PRESS WHL ASY822-170C5.
HHCS 1/4-20X1 GR5802-005C6.
PW HANDLE405-049D7.
PW HANDLE TUBE405-004D8.
PIN COTTER 5/32 X 1 PLT805-019C9.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C10.
1/4 PW SPACER5/8 DIA405-031D11.
PARALLEL ARM PIVOT TUBE404-147D12.
HHCS 5/8-11X4 GR5802-060C13.
SPRING EXT 1 7/8ODX8 3/8X.25W807-113C14.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C15.
CLOSEING WHEEL ARM WELD405-015H16.
CLOSING WHEEL MOUNT404-164D17.
HHCS 5/8-11X2 GR5802-055C18.
HHCS 1/2-13X1 1/2 GR5802-091C19.
HHCS 1/2-13X1 GR5802-258C20.
WASHER LOCK SPRING 1/2 PLT804-015C21.
1X12 PW ADJUSTER405-032D22.

Press Wheels

05/16/12 - 63 - 173-159P

Table of Contents Part Number Index

6 1/2" Press Wheel Closing Disk

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17665

173-159P - 64 - 05/16/12

Table of Contents Part Number Index

6 1/2" Press Wheel Closing Disk

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17665
6 1/2 X 12 PW ASSEMBLY814-105C1.
HFSS 5/16-18X1/2 GR5802-352C2.
HAM RIM 6.5 X 12612-50-083.
HAM.1.5 X.5 ID BALL BEARING2035034.
HAM. TIRE 6.5 X 12 TRACTION204030-A5.
NUT HEX WHIZ 5/16-18 PLT803-043C6.
HHCS 1/2-13X10 GR5802-416C7.
NUT HEX FLANGE LOCK 5/8-11 PLT803-263C8.
PARALLEL ARM PIVOT TUBE404-147D9.
WASHER FLAT5/8 HARD ASTMF436804-095C10.
HHCS 5/8-11X1 3/4 GR5802-053C11.
ARM WELD 6 1/2 X 12 PW405-018H12.
NUT LOCK 1/2-13 PLT803-019C13.

6.5 X 12 PW SPACER TUBE405-018D14.
SPRING EXT 1 5/16 X6 7/8 X1/4W807-121C15.
8 CONCAVE DISK820-122C16.
HHCS 1/2-13X1 GR5802-258C17.
WASHER LOCK SPRING 1/2 PLT804-015C18.
6 1/2" PRESS WHEEL CLOSING DISK MOUNT19.

Refer to "6 1/2" Press Wheel Closing

Disk Mount for breakdown.

Press Wheels

05/16/12 - 65 - 173-159P

Table of Contents Part Number Index

6 1/2" Press Wheel Closing Disk Mount

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17654

173-159P - 66 - 05/16/12

Table of Contents Part Number Index

6 1/2" Press Wheel Closing Disk Mount

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17654
ANCHOR, SPRING405-041D1.
HHCS 5/8-11X1 3/4 GR5802-053C2.
WASHER LOCK SPRING 5/8 PLT804-022C3.
MOUNT, CLOSING DISK ARM405-042D4.
PARALLEL ARM PIVOT TUBE404-147D5.
PIN, STOP405-043D6.
PIN ROLL 1/4 X 1 PLATED805-044C7.
CLOSING DISK ARM WELD405-017H8.
HHCS 1/2-13X3 GR5 SPTHD802-513C9.
CLOSING DISK SPRING CAM405-009H10.
SPRING PIVOT NUT405-044D11.
SPRING TORSION .250 WIRE807-181C12.
NUT LOCK 1/2-13 PLT803-019C13.

Press Wheels

05/16/12 - 67 - 173-159P

Table of Contents Part Number Index

Decal Location

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17710

173-159P - 68 - 05/16/12

Table of Contents Part Number Index

Decal Location

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17710
DECAL SEED RATE 2 OF 2838-055C1.
DECAL SEED RATE 1 OF 2838-054C2.
DECAL 3PT DRIVE TYPE LH VIEW818-886C3.

Not shown. 1999 and belowDECAL GP W/ LOGO AND STRIPE818-415C4.

Not shown. 1999 and belowDECAL W/ 4 COLOR STRIPE818-414C5.
DECAL SLOW MOVING VEHICLE818-003C6.
DECAL RED REFLECTOR818-230C7.

2000+DECAL 1515838-163C8.

2000+DECAL 2015838-162C8.

2000+DECAL 2515838-190C8.

2000+DECAL GREAT PLAINS ON LOGO SML838-228C9.

DECAL AMBER REFLECTOR818-229C10.

1515 drill.DECALCAUTION TIRE 32 PSI818-751C11.

2015 and 2515 drills.DECAL CAUTIONTIRE 36 PSI818-855C11.
DECAL CAUTIONTIRES NOT A STEP818-398C12.
DECAL WARNINGHIGH PRESSUR SML818-339C13.
DECAL DANGER CRUSH TRCTR & 3PT818-590C14.
DECAL CAUTIONOPERATIONAL MACH818-587C15.
DECAL 3PT DRIVE TYPE RH VIEW818-885C16.
DECAL WARNING20 MPH TRANS LRG818-188C17.
DECAL SEED LEVEL LH838-237C18.
DECAL GREAT PLAINS W/LOGO818-412C19.

2000+DECAL SCRIPT SOLID STAND SMALL838-158C20.

2000+DECAL LOGO&GP F/STRIPE 4 X 24838-161C21.

2000+DECAL 3 COLOR STRIPE 2.50 WIDE838-160C22.

Rev. 2 is not interchangeable

w/rev. 1
1st rev.1999 and belowDECAL 1515 BEAN MACHINE838-058C8.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.1999 and belowDECAL 2015 BEAN MACHINE838-059C8.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.1999 and belowDECAL 2515 BEAN MACHINE838-060C8.
Rev. 2 is not interchangeable

w/rev. 1
1st rev.1999 and belowDECAL GREAT PLAINS ON LOGO818-413C9.

Rev. 2 is not interchangeable

w/rev. 1
1st rev.1999 and belowDECAL GREAT PLAINS W/LOGO818-412C21.

Decals

05/16/12 - 69 - 173-159P

Table of Contents Part Number Index

2515 Flat Fold Marker

(Applies to 2515 Soybean Machine only)

17761

173-159P - 70 - 05/16/12

Table of Contents Part Number Index

2515 Flat Fold Marker

(Applies to 2515 Soybean Machine only)

Image No.dwg17761

RH FIRST SECTION113-188H1.

LIFT LUG CHANNEL RH113-189H2.

3 SECTION MARKER BREAKAWAY113-195H3.
24' F.F. MKR. 3RD. SECTION113-196H4.
PIN 1 OD X 4.41 USABLE113-248D5.
FIRST PIVOT SHAFT113-312D6.
SECOND PIVOT SHAFT113-313D7.
CYLINDER STOP113-324D8.
STOP BUSHING113-325D9.
13' MARKER TUBE 46 1/2 LONG113-354D10.
25 BM RH MARKER MOUNT113-670H11.

MARKER DISC & HUB ASSEMBLY113-563S12.

RPBY 113-563S113-564S12.

GREASE ZERK STRAIGHT 1/4-28800-001C13.
SCREW SET SQ HD 1/2-13X1 GR5801-054C14.
HHCS 1/2-13X3 GR5802-039C15.
HHCS 5/16-18X2 GR5802-115C16.
HHCS 1/2-13X4 1/2 GR5 SPTHD802-249C17.
HHCS 5/8-11X5 1/2 GR5802-254C18.
HHCS 3/8-16X2 GR2802-266C19.
NUT LOCK 5/16-18 PLT803-011C20.
NUT LOCK 3/8-16 PLT803-013C21.
NUT LOCK 1/2-13 PLT803-019C22.
NUT HEX 1/2-13 PLT803-020C23.
NUT LOCK 5/8-11 PLT803-024C24.
NUT HEX JAM 1/2-13 PLT803-036C25.
WASHER LOCK SPRING 1/2 PLT804-015C26.
WASHER FLAT1/2 USS PLT804-017C27.
WASHER FLAT1 SAE804-029C28.
PIN COTTER 3/16 X 2805-058C29.
CYL 2.5X20X1.12 ROD (TIE)1 PIN810-118C30.

CHAIN BAR WELDMENT113-200H31.
HINGE PIN113-311D32.
CHAIN COIL 1/4 HIGH TEST 50 IN113-328D33.
CHAIN BAR113-323D34.
MARKER CARRIER113-560H35.
MARKER TRANSPORT MOUNT113-568H36.
HHCS 3/8-16X1 1/2 GR5802-022C37.
HHCS 3/8-16X3 1/4 GR5802-168C38.
HHCS 3/8-16X2 1/2 GR5 FTHD802-261C39.
5/16 X 1 1/4 UTILITY CLEVIS890-018C40.
NUT HEX 3/4-10 PLT803-027C41.
WASHER FLAT3/8 USS PLT804-011C42.
DECAL WARNINGPINCH/CRUSH MRKR818-682C43.
WASHER LOCK SPRING 3/4 PLT804-023C44.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C45.
U-BOLT 3/4-10 X 4 1/32 X 7 1/2806-154C46.
U-BOLT 1/2-13 X 5 1/32 X 5 1/2806-153C47.
DECAL AMBER REFLECTOR818-229C48.
BUSHING CYL 1 1/4 X 1 X 1890-005C49.

Markers

RevisionCommentsPart DescriptionPart No.Ref.

Shown.LH FIRST SECTION113-180H1.

Shown.LIFT LUG CHANNEL LH113-181H2.

Shown.RPBY 113-195H113-192H3.

Shown.25 BM LH MARKER MOUNT113-671H11.

2nd rev.Refer to "Marker Disk (113-563S)" for

breakdown.

1st rev.Refer to "Marker Disk (113-564S)" for

breakdown.

Refer to "Marker Hydraulic Cylinder

(810-205C)" for breakdown.

05/16/12 - 71 - 173-159P

Table of Contents Part Number Index

1515 And 2015 Flat Fold Marker

(Applies to 1515 Soybean Machine, 2015 Soybean Machine only)

17763

173-159P - 72 - 05/16/12

Table of Contents Part Number Index

1515 And 2015 Flat Fold Marker

(Applies to 1515 Soybean Machine, 2015 Soybean Machine only)

Image No.dwg17763
15 & 20 BM RH MARKER MOUNT113-667H1.

Shown.15 & 20 BM LH MARKER MOUNT113-668H1.
FIRST PIVOT SHAFT113-312D2.
BUSHING CYL 1 1/4 X 1 X 1890-005C3.
GREASE ZERK STRAIGHT 1/4-28800-001C4.
RH FIRST SECTION113-188H5.
LH FIRST SECTION113-180H5.
NUT LOCK 3/8-16 PLT803-013C6.
LIFT LUG CHANNEL R.H.113-467H7.

Shown.LIFT LUG CHANNEL L.H.113-468H7.
SECOND PIVOT SHAFT113-313D8.
WASHER FLAT1 SAE804-029C9.
PIN 1 OD X 4.41 USABLE113-248D10.
PIN COTTER 3/16 X 2805-058C11.
HHCS 1/2-13X4 1/2 GR5 SPTHD802-249C12.
NUT LOCK 1/2-13 PLT803-019C13.
HHCS 3/8-16X1 3/4 GR2802-253C14.
CYLINDER STOP113-324D15.
STOP BUSHING113-325D16.

Shown. 1515 drill.2 SECTION MARKER BREAKAWAY113-191H17.

1515 drill.RPBY 113-191H113-193H17.

2015 drill116-063HER BREAKAWAY113-646H17.
WASHER FLAT1/2 USS PLT804-017C18.

1515 drill.MARKER TUBE 42 LG113-351D19.

2015 drill.13' MARKER TUBE 46 1/2 LONG113-354D19.
MARKER DISC & HUB ASSEMBLY113-563S20.

RPBY 113-563S113-564S20.

CYL 2X20X1.12 ROD (TIE) 1 PIN810-205C21.

NUT LOCK 5/8-11 PLT803-024C22.
HHCS 5/8-11X5 1/2 GR5802-254C23.
HHCS 5/16-18X2 GR5802-115C24.
NUT LOCK 5/16-18 PLT803-011C25.
HHCS 1/2-13X3 1/4 GR5802-099C26.
SCREW SET SQ HD 1/2-13X1 GR5801-054C27.
NUT HEX JAM 1/2-13 PLT803-036C28.
NUT HEX 1/2-13 PLT803-020C29.
WASHER LOCK SPRING 1/2 PLT804-015C30.
ADJUST MOUNT SPACERTUBE113-491D31.
MARKER DISK ADJUST MOUNT113-503H32.
U-BOLT 3/4-10 X 7 1/32 X 7 3/4806-121C33.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C34.
MARKER STOP PLATE113-659D35.
WASHER LOCK SPRING 3/4 PLT804-023C36.
NUT HEX 3/4-10 PLT803-027C37.
DECAL AMBER REFLECTOR818-229C38.
DECAL WARNINGPINCH/CRUSH MRKR818-682C39.
BM MARKER MOUNT BOLT PLATE113-661D40.
HHCS 3/4-10X7 GR5802-095C41.

breakdown.

breakdown.

Refer to "Marker Hydraulic Cylinder

(810-205C)" for breakdnw.

Used with alternative marker location.15FT BM MARKER BOLT PLATE KIT113-686A42.

Markers

RevisionCommentsPart DescriptionPart No.Ref.

2nd rev.Refer to "Marker Disk (113-563S)" for

1st rev.Refer to "Marker Disk (113-564S)" for

05/16/12 - 73 - 173-159P

Table of Contents Part Number Index

2015 Marker Carrier

(Applies to 2015 Soybean Machine only)

17764

173-159P - 74 - 05/16/12

Table of Contents Part Number Index

2015 Marker Carrier

(Applies to 2015 Soybean Machine only)

Image No.dwg17764
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C1.
20 BM MARKER TRANSPORT CARRIER113-677H2.
U-BOLT 1/2-13 X 5 1/32 X 5 1/2806-153C3.
WASHER FLAT1/2 USS PLT804-017C4.
WASHER LOCK SPRING 1/2 PLT804-015C5.
NUT HEX 1/2-13 PLT803-020C6.
MARKER TRANSPORT MOUNT113-568H7.

Markers

RevisionCommentsPart DescriptionPart No.Ref.

05/16/12 - 75 - 173-159P

Table of Contents Part Number Index

Marker Disk (113-563S)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

16557

173-159P - 76 - 05/16/12

Table of Contents Part Number Index

Marker Disk (113-563S)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg16557
1 SPINDLE MARKER WELDMENT113-562H1.
TINE GAUGEWHEEL HUB SEAL816-014C2.
BRG CONE 1.00ID L44643822-030C3.
BRG CUP 1.98OD L44610822-080C4.
RELIABLE HUB 4 BOLT1-100-02-005.
NEILSON STUD 1/2-20UNFX1 13/16B0-476.
GREASE CAP #1505890-614C7.

Includes items 2 through 7 and 14.TINE GW HUB815-001C8.
WASHER FLAT3/4 SAE PLT804-025C9.
NUT HEX SLOTTED 3/4-16803-053C10.
PIN COTTER 5/32 X 1 PLT805-019C11.
16 4-BOLT NOTCHED MARKER DISK820-094C12.
DEPTH BAND 10 4-BOLT 4B.C.113-369H13.
NUT LUG 1/2-20X60DEG PLT(.75AF803-159C14.

Markers

05/16/12 - 77 - 173-159P

Table of Contents Part Number Index

Marker Disk (113-564S)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

14125

173-159P - 78 - 05/16/12

Table of Contents Part Number Index

Marker Disk (113-564S)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg14125
RPBY 113-563S113-564S1.
1 SPINDLE MARKER WELDMENT113-562H2.
TINE GAUGEWHEEL HUB SEAL816-014C3.
BRG CONE 1.00ID L44643822-030C4.
BRG CUP 1.98OD L44610822-080C5.

Includes items 3 through 7.RELIABLE HUB 4 BOLT1-100-02-006.
NEILSON STUD 1/2-20UNFX1 13/16B0-477.
GREASE CAP #1505890-614C8.

Includes items 3 through 7 and 15.TINE GW HUB815-001C9.
WASHER FLAT3/4 SAE PLT804-025C10.
NUT HEX SLOTTED 3/4-16803-053C11.
PIN COTTER 5/32 X 1 PLT805-019C12.
16 4-BOLT NOTCHED MARKER DISK820-094C13.
DEPTH BAND 10 4-BOLT 4B.C.113-369H14.
NUT LUG 1/2-20X60DEG PLT(.75AF803-159C15.

Markers

05/16/12 - 79 - 173-159P

Table of Contents Part Number Index

Flat Fold Dual Marker Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17643

173-159P - 80 - 05/16/12

Table of Contents Part Number Index

Flat Fold Dual Marker Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17643

For 2515 drill.SPHH1/4R1 212 3/8MNPT-W/AD811-297C1.

For 1515 drill.HH1/4R1156 3/8MNPT 1/2MNPT811-017C1.

For 2015 drill.HH1/4R1 192 3/8MNPT 1/2MNPT811-015C1.
CABLE TIE .31X21.5 6DIA 120LB800-082C2.
PLASTIC HOSE LABEL817-348C3.

For 2515.HH1/4R1 234 3/8MNPT 1/2MNPT811-129C4.

For 1515.HH1/4R1 176 3/8MNPT 1/2MNPT811-300C4.

For 2015.SP HH1/4R1 212 3/8MNPT-W/AD811-297C4.
EL 3/8FNPT 9/16MORB811-281C5.
AD 3/8MNPT811-044C6.
VALVE 3/8 NEEDLE810-058C7.
CABLE TIE 2 DIA MIN - ORG800-300C8.

Markers

05/16/12 - 81 - 173-159P

Table of Contents Part Number Index

Marker Sequence Valve Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17762

173-159P - 82 - 05/16/12

Table of Contents Part Number Index

Marker Sequence Valve Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17762
EL 3/8FNPT 9/16MORB811-281C1.
PLASTIC HOSE LABEL817-348C2.
CABLE TIE 2 DIA MIN - ORG800-300C3.

For 2515 drill.HH1/4R1234 3/8MNPT 1/2MNPT811-129C4.

For 1515 drill.HH1/4R1176 3/8MNPT 1/2MNPT811-300C4.

For 2015 drill.SPHH1/4R1 212 3/8MNPT-W/AD811-297C4.

For 2515 drill.SPHH1/4R1 212 3/8MNPT-W/AD811-297C5.

For 1515 drill.HH1/4R1156 3/8MNPT 1/2MNPT811-017C5.

For 2015 drill.HH1/4R1 192 3/8MNPT 1/2MNPT811-015C5.
HHCS 3/8-16X3/4 GR5802-014C6.
WASHER LOCK SPRING 3/8 PLT804-013C7.
SEQUENCE VALVE MOUNT BRACKET113-488D8.
HHCS 1/2-13X1 1/4 GR5802-034C9.
WASHER LOCK SPRING 1/2 PLT804-015C10.
NUT HEX 1/2-13 PLT803-020C11.
VALVE,SEQUENCESHOEMAKER810-197C12.

EL 9/16MJIC 9/16FJIC811-169C13.
AD 1/2FNPT X 9/16FJICS811-440C14.

Referto"Sequence Valve(810-197C)"

for breakdown.

Markers

05/16/12 - 83 - 173-159P

Table of Contents Part Number Index

Sequence Valve (810-197C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

12024

173-159P - 84 - 05/16/12

Table of Contents Part Number Index

Sequence Valve (810-197C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg12024
SHOEMAKER BODY MKR SEQ VALVE30891.
SHOEMAKER O-RING1088-9082.
SHOEMAKER PLUG, HEX SOCKET1132-083.
SHOEMAKER NEEDLE,FLOW CONTROL11794.
SHOEMAKER .125 SPRING PIN12175.
SHOEMAKER SPRING COMPRESSION12116.
RPBY 1100-0111088-0117.
RPBY SEAL KIT1089-0118.
SHOEMAKER SCREW, FLOW CON.ADJ.11809.
SHOEMAKER HEX, JAM NUT Z PLTD.121810.
RPBY SEAL KIT109911.
RPBY SEAL KIT1087-25012.
RPBY SEAL KIT1087-43713.
RPBY SEAL KIT104214.
SHOEMAKER O-RING1088-90615.
SHOEMAKER FITTING PORT ADPT.118216.
SHOEMAKER HEX,SKT O-RING PLUG1132-0517.
SHOEMAKER O-RING1088-90518.
SHOEMAKER SAE #6 TO #6 STRGHT1092-6-619.
SHOEMAKER SPOOL,MKR SEQ. .055215320.
SEAL KIT SHOEMAKER #1223810-456C

Markers

05/16/12 - 85 - 173-159P

Table of Contents Part Number Index

Marker Hydraulic Cylinder (810-205C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

12224

173-159P - 86 - 05/16/12

Table of Contents Part Number Index

Marker Hydraulic Cylinder (810-205C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg12224
MW ROD CLEVIS1M60061.
MW ROD2M23262.
MW HEAD3R01223.
RPBY 4M21084M21024.
BARREL5M21285.
BASE MIDWAY6R00706.
MW TIE ROD7M23287.
MW PIN SHORT2A02068.

Only available in seal kit item 18.WIPER SEAL9.

Only available in seal kit item 18.BACK-UP10.

Only available in seal kit item 18.O-RING11.

Only available in seal kit item 18.BACK-UP12.
RPBY 803-114C2A002213.
RPBY 803-234C2A001214.
RPBY 802-023C2A000615.
MW PIN CLIP2A013216.

Only available in seal kit item 18.O-RING17.
SEAL KIT MW 5A2104810-310C18.

Markers

05/16/12 - 87 - 173-159P

Table of Contents Part Number Index

Midway Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

15705

173-159P - 88 - 05/16/12

Table of Contents Part Number Index

Midway Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg15705
MW ROD CLEVIS1M60061.
MW ROD2M33262.
MW HEAD3M33103.
RPBY 4M31084M31024.
MW TUBE 2-1/2 X 20 CYLINDER5M31285.
MW BASE6M31506.
MIDWAY TIE ROD7M33287.
MW PIN SHORT2A02068.
MW PIN CLIP2A01329.

Only found in seal kit 17MW WIPER10.

Only found in seal kit 17MW U-CUP11.

Only found in seal kit 17MW O-RING12.

Only found in seal kit 17MW BACKUP13.
RPBY 803-114C2A002214.
RPBY 803-234C2A001215.
RPBY 802-023C2A000616.
SEAL KIT MW 2.5 CYL 3A3102810-210C17.

Markers

05/16/12 - 89 - 173-159P

Table of Contents Part Number Index

Cross Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

15704

173-159P - 90 - 05/16/12

Table of Contents Part Number Index

Cross Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg15704
CROSS TUBE1D0005-22501.
CROSS ROD1D0204-24752.
CROSS ROD CLEVIS1D1003-43.
CROSS NUT, CLEVIS & TIE ROD2A0235-64.
CROSS SCREW, CAP2A0079-6165.
CROSS TIE ROD2A0578-24756.
CROSS NUT, CLEVIS & TIE ROD2A0235-67.
CROSS HEAD1D1155-138.

Only found in seal kit item 18BACKUP PISTON9.

Only found in seal kit item 18U-CUP10.

Only found in seal kit item 18ROD WIPER11.

Only found in seal kit item 18O-RING PISTON12.
CROSS PISTON1D1401-25013.
CROSS BASE4C202414.
CROSS NUT, PISTON2A0246-1215.
CROSS PIN, CLEVIS (BASE END)1D1582-1627516.
RPBY 805-032C2A0308-117.
RPBY 810-210C810-119C18.

Markers

05/16/12 - 91 - 173-159P

Table of Contents Part Number Index

Monarch Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

15713

173-159P - 92 - 05/16/12

Table of Contents Part Number Index

Monarch Marker Hydraulic Cylinder 2.5 X 20 X 1.12 (810-118C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg15713
LION ROD CLEVIS 1 1/8-12UNF4926501.
LION ROD 1.25 X 204926432.
LION ROD CAP 2.5X1.25 9/16 ORB4927243.
LION PISTON4925294.
LION CYL. TUBE 2.5X20 H60804916805.
LION CLEVIS CAP 2.54923716.
LION TIE ROD 3/8X20 H6630 RIO4922307.
LION PIN1349538.

Only found in seal kit 21WIPER SEAL9.

Only found in seal kit 21O-RING10.

Only found in seal kit 21BACKUP RING11.

Only found in seal kit 21O-RING12.

Only found in seal kit 21BACKUP RING13.
LION NUT 3/4UNC12909014.
NUT HEX 3/8-16 PLT803-014C15.
SCREW SET SH 3/8-16X3/8 TYPE C801-023C16.
LION PIN CLIP-CLEVIS13495217.

Only found in seal kit 21O-RING18.

Only found in seal kit 21BACKUP RING19.
LION PLUG18656120.
SEAL KIT LN 639574 2.5BX1.25RD810-254C21.

Markers

05/16/12 - 93 - 173-159P

Table of Contents Part Number Index

Lift Assist

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17780

173-159P - 94 - 05/16/12

Table of Contents Part Number Index

Lift Assist

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17780
U-BOLT 5/8-11 X 4 1/32 X 6 1/2806-080C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
NUT HEX 5/8-11 PLT803-021C3.
L.A. FRAME ARM124-029H4.
HHCS 5/8-11X1 3/4 GR5802-053C5.
L.A. FRAME ARM ANGLE BRACE124-030H6.
HHCS 5/8-11X2 1/2 GR5802-058C7.
NUT HEX 3/8-16 PLT803-014C8.
WASHER LOCK SPRING 3/8 PLT804-013C9.
3-PT STEP RETAINER119-032D10.
HHCS 3/8-16X1 1/4 GR5802-079C11.
WASHER FLAT3/8 SAE PLT804-012C12.
WALKBOARDSUPPORT BAR124-123D13.
U-BOLT 3/8-16 X 3 1/32 X 4806-021C14.
L.A. WEIGHT BRACKET TUBE124-033H15.
CASTING JD SUITCASE WEIGHT812-017C16.
CASTING IH SUITCASE WEIGHT812-018C17.

Lift Assist

05/16/12 - 95 - 173-159P

Table of Contents Part Number Index

Lift Assist Caster Wheels

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

17781

173-159P - 96 - 05/16/12

Table of Contents Part Number Index

Lift Assist Caster Wheels

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg17781
SINGLE WHEEL CASTER 10 IN.161-045H1.
NUT LOCK 1/2-13 PLT803-019C2.
HHCS 1/2-13X3 1/4 GR5802-099C3.
6 BOLT SINGLE ENDED SPINDLE201-009D4.
SEAL 2.56X1.625X.438 CR16289816-011C5.
BRG CONE 1.50ID LM-29749822-018C6.
BRG CUP LM-29710822-019C7.

Includes hub and item 7, 8 and 9.HUB6 BOLT 4 5/8 PILOT W/ CUPS815-082C8.
BEARING CUP LM-67010822-020C9.
BEARING CONE LM-67048822-021C10.
WASHER SPINDLE - 7/8804-055C11.
NUT HEX SLOTTED 7/8-14 PLT803-029C12.
PIN COTTER 5/32 X 1 3/4 LG805-246C13.
HUB GREASE CAP200-001D14.

Includes items 5 through 14.HUB 6 BOLT 4 5/8 PILOT 3600 LB815-077C15.
WHEEL 8 X 15 X 6 BOLT814-008C16.
VALVE STEM TR415X.625X1 1/4 LG816-035C17.
RPBY 814-011C814-026C18.

Includes items 16, 17 and 18.6 BOLT WHL&TIRE 8 PLY TUBELESS161-046K19.
CASTER SPACER161-056D20.
NUT LOCK 5/8-11 PLT803-024C21.
HHCS 5/8-11X4 GR5802-060C22.
LIFT ASSIT CASTER SHAFT161-116D23.
BUSHING 2 1/2 X 2 1/4 X 2 LG.890-072C24.
CASTER CAP SPRING ARM161-062H25.
HHCS 1/2-13X1 1/4 GR5802-034C26.
SPRING RESET HOE807-016C27.
FRONT SPRING HOOK TUBE164-032D28.
RHSNB 1/2-13X2 GR5802-129C29.
HHCS 1/2-13X2 1/2 GR5802-130C30.
FRONT SPRING RETAINERCHANNEL164-018D31.
WASHER LOCK SPRING 1/2 PLT804-015C32.
NUT HEX 1/2-13 PLT803-020C33.
NUT HEX 1-8 PLT803-031C34.
WASHER LOCK SPRING 1 PLT804-027C35.
GREASE ZERK STRAIGHT 1/4-28800-001C36.
PIN COTTER 3/16 X 2805-058C37.
WASHER FLAT1 SAE804-029C38.
L.A. ARM124-031H39.
6 1/8 EYE BOLT194-129H40.
PIN 1 OD X 4.41 USABLE113-248D41.
CYL 2.5X8X1.12 ROD (TIE)1 PIN810-200C42.

CYLINDER LOCK CHANNEL-LONG161-073H43.
BENT PIN 3/8 X 2 1/2 USE W/COT805-152C44.
3 BOLT PIVOT CAST MACHINED120-223D45.
HHCS 1/2-13X1 3/4 GR5802-082C46.
BOLT WHEEL 1/2-20X1 90-DEG802-104C47.

Referto "Red Lion LiftAssist Hydraulic

Cylinder (810-200C)" or "Midway Lift
AssistHydraulic Cylinder (810-200C)"
for breakdown.

Lift Assist

05/16/12 - 97 - 173-159P

Table of Contents Part Number Index

Lift Assist Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

13014

173-159P - 98 - 05/16/12

Table of Contents Part Number Index

Lift Assist Hydraulics

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg13014
HH1/4R2 070 9/16FJIC9/16MORB90811-723C1.
HH1/4R2 084 1/2MNPT 9/16FJIC811-724C2.
CABLE TIE .31X21.5 6DIA 120LB800-082C3.
CABLE TIE .19X14.25 3DIA 50LB800-060C4.
BREATHER PLUG 9/16-18 MORB811-722C5.
CYL 2.5X8X1.12 ROD (TIE)1 PIN810-200C6.

Referto "Red Lion LiftAssist Hydraulic

Cylinder (810-200C)" or "Midway Lift
AssistHydraulic Cylinder (810-200C)"
for breakdown.

Lift Assist

05/16/12 - 99 - 173-159P

Table of Contents Part Number Index

Red Lion Lift Assist Hydraulic Cylinder (810-200C)

(Applies to 1515 Soybean Machine, 2015 Soybean Machine, 2515 Soybean Machine only)

14284

173-159P - 100 - 05/16/12