Table of Contents Part Number Index
Parts Manual
1510HDF, 2010HDF & 2510HDF
3-Point Drills
Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!
24137
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2012 Printed 11/20/12 288-340P
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction.................................................4
Using This Manual...............................................................4
Manual Replacement Information.......................................4
Manual Revisions................................................................4
Touch-up Paint....................................................................4
Hardware Legend................................................................5
Replacement Hardware......................................................5
Serial Numbers...................................................................5
Part Number Service Coding..............................................5
Box Assembly................................................................6
Box To Frame......................................................................6
Box to Frame for 2510HDF.................................................8
Box Components...............................................................10
Box Components for 2510HDF.........................................12
Lid To Box..........................................................................14
Fertilizer Box Mount 15 ft..................................................16
Fertilizer Box Mount 20 ft..................................................18
Fertilizer Lid Assembly 15 ft..............................................20
Fertilizer Lid Assembly 20 ft..............................................22
Seed Level Indicator..........................................................24
Seed Level Indicator For 2510HDF...................................26
Small Seeds Box & Lid Assembly.....................................28
Small Seeds Box Drive......................................................32
Small Seeds Box Mounting...............................................34
Small Seeds Walkboard and Ladder 2510HDF................36
Walkboard and Ladder with Fertilizer 1510HDF...............38
Walkboard and Ladder with Fertilizer 2010HDF...............40
Walkboard And Ladder without Fertilizer..........................42
Rear Parking Stands.........................................................44
Drive.............................................................................46
Dual Gauge Wheel 20FT & 25FT......................................46
Dual Gauge Wheel Mount 20FT & 25FT...........................48
Dual Gauge Wheel Transmission 20FT & 25FT................50
Fertilizer Drive...................................................................52
Single Gauge Wheel 15FT................................................54
Single Gauge Wheel 20FT & 25FT...................................56
Single Gauge Wheel Mount 15FT.....................................58
Single Gauge Wheel Transmission 15FT..........................60
Single Gauge Wheel Transmission 20FT & 25FT.............62
Small Seeds Box Drive with Fertilizer (Option).................64
Small Seeds Drive.............................................................66
Small Seeds Drive and Fertilizer (Option).........................68
Marker...........................................................................70
Flat Fold Marker 15FT & 20FT..........................................70
Flat Fold Marker 25FT.......................................................72
Flat Fold Marker Hydraulics..............................................74
Flat Fold Marker Sequence Valve Hydraulics....................76
Hydraulic Cylinder 2 X 20 X 1.12 (810-205)......................78
Hydraulic Cylinder 2.5 x 20 x 1.20 (810-118C).................80
Marker Carrier 20FT & 25FT.............................................82
Marker Disk and Hub (113-563)........................................84
Sequence Valve (810-197C).............................................86
Metering System..........................................................88
15 ft Feeder Cup Channel (LH 7 1/2")...............................88
15 ft Feeder Cup Channel (LH 8").....................................90
15 ft Feeder Cup Channel (LH 10")...................................92
15 ft Feeder Cup Channel (RH 7 1/2")..............................94
15 ft Feeder Cup Channel (RH 8")....................................96
15 ft Feeder Cup Channel (RH 10")..................................98
20 ft Feeder Cup Channel (LH 7 1/2").............................100
20 ft Fedder Cup Channel (LH 8")...................................102
20 ft Feeder Cup Channel (LH 10").................................104
20 ft Fedder Cup Channel (RH 7 1/2")............................106
20 ft Feeder Cup Channel (RH 8")..................................108
20 ft Feeder Cup Channel (RH 10")................................110
25 ft Feeder Cup Channel (LH 7")...................................112
25FT Feeder Cup Channel (LH 8").................................114
25 ft Feeder Cup Channel (LH 10").................................116
25 ft Feeder Cup Channel (RH 7")..................................118
25FT Feeder Cup Channel (RH 8").................................120
25 ft Feeder Cup Channel (RH 10")................................122
Fertilizer Metering...........................................................124
Fertilizer Tray Adjustment................................................126
Fertilizer Trays, Gates & Shafts.......................................128
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel
116-283A).................................................................130
Openers......................................................................132
HD10 Series Opener Body..............................................132
HD10 Series Opener Arms & Mounts.............................134
Fertilizer Hose Retainer..................................................136
HD10 & 25 Series Inside Scraper...................................138
HD10 Series Keeton Seed Firmer (Option).....................140
HD10 Series Seed-Lok (Option).....................................142
Side Wheel Scraper (Option)..........................................144
Small Seeds Seed Tube..................................................146
Small Seeds Y-Tube Drop with Fertilizer.........................148
Press Wheels.............................................................150
1 1/4" x 13 1/2" Press Wheel...........................................150
1" x 12" Press Wheel.......................................................152
3" x 13" Press Wheel.......................................................154
Harrow........................................................................156
Harrow.............................................................................156
Decals.........................................................................158
Decal Placement.............................................................158
Part Number Index.....................................................160
© Copyright 2012 All rights reserved Printed 11/20/12
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
288-340P - 2 - 11/20/12
Great Plains Manufacturing, Incorporated Trademarks
Printed in the United States of America.
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
1
1 1/4" x 13 1/2" Press Wheel......................................150
1" x 12" Press Wheel..................................................152
15 ft Feeder Cup Channel (LH 10")..............................92
15 ft Feeder Cup Channel (LH 7 1/2")..........................88
15 ft Feeder Cup Channel (LH 8")................................90
15 ft Feeder Cup Channel (RH 10").............................98
15 ft Feeder Cup Channel (RH 7 1/2").........................94
15 ft Feeder Cup Channel (RH 8")...............................96
2
20 ft Fedder Cup Channel (LH 8")..............................102
20 ft Fedder Cup Channel (RH 7 1/2").......................106
20 ft Feeder Cup Channel (LH 10")............................104
20 ft Feeder Cup Channel (LH 7 1/2")........................100
20 ft Feeder Cup Channel (RH 10")...........................110
20 ft Feeder Cup Channel (RH 8").............................108
25 ft Feeder Cup Channel (LH 10")............................116
25 ft Feeder Cup Channel (LH 7")..............................112
25 ft Feeder Cup Channel (RH 10")...........................122
25 ft Feeder Cup Channel (RH 7").............................118
25FT Feeder Cup Channel (LH 8")............................114
25FT Feeder Cup Channel (RH 8")............................120
3
3" x 13" Press Wheel..................................................154
B
Box Components..........................................................10
Box Components for 2510HDF....................................12
Box To Frame.................................................................6
Box to Frame for 2510HDF............................................8
D
Decal Placement........................................................158
Dual Gauge Wheel 20FT & 25FT.................................46
Dual Gauge Wheel Mount 20FT & 25FT......................48
Dual Gauge Wheel Transmission 20FT & 25FT...........50
F
Fertilizer Box Mount 15 ft.............................................16
Fertilizer Box Mount 20 ft.............................................18
Fertilizer Drive..............................................................52
Fertilizer Hose Retainer.............................................136
Fertilizer Lid Assembly 15 ft.........................................20
Fertilizer Lid Assembly 20 ft.........................................22
Fertilizer Metering......................................................124
Fertilizer Tray Adjustment...........................................126
Fertilizer Trays, Gates & Shafts..................................128
Flat Fold Marker 15FT & 20FT.....................................70
Flat Fold Marker 25FT..................................................72
Flat Fold Marker Hydraulics.........................................74
Flat Fold Marker Sequence Valve Hydraulics...............76
H
Harrow........................................................................156
HD10 & 25 Series Inside Scraper..............................138
HD10 Series Keeton Seed Firmer (Option)................140
HD10 Series Opener Arms & Mounts........................134
HD10 Series Opener Body.........................................132
HD10 Series Seed-Lok (Option)................................142
Hydraulic Cylinder 2 X 20 X 1.12 (810-205).................78
Hydraulic Cylinder 2.5 x 20 x 1.20 (810-118C)............80
L
Lid To Box.....................................................................14
Loop Shaft Monitor (2 Channel 116-282A) (3 Channel
116-283A)............................................................130
M
Marker Carrier 20FT & 25FT........................................82
Marker Disk and Hub (113-563)...................................84
R
Rear Parking Stands....................................................44
S
Seed Level Indicator.....................................................24
Seed Level Indicator For 2510HDF..............................26
Sequence Valve (810-197C)........................................86
Side Wheel Scraper (Option).....................................144
Single Gauge Wheel 15FT...........................................54
Single Gauge Wheel 20FT & 25FT..............................56
Single Gauge Wheel Mount 15FT................................58
Single Gauge Wheel Transmission 15FT.....................60
Single Gauge Wheel Transmission 20FT & 25FT........62
Small Seeds Box & Lid Assembly................................28
Small Seeds Box Drive.................................................32
Small Seeds Box Drive with Fertilizer (Option)............64
Small Seeds Box Mounting..........................................34
Small Seeds Drive........................................................66
Small Seeds Drive and Fertilizer (Option)....................68
Small Seeds Seed Tube.............................................146
Small Seeds Walkboard and Ladder 2510HDF............36
Small Seeds Y-Tube Drop with Fertilizer.....................148
W
Walkboard and Ladder with Fertilizer 1510HDF..........38
Walkboard and Ladder with Fertilizer 2010HDF..........40
Walkboard And Ladder without Fertilizer.....................42
11/20/12 - 3 - 288-340P
Table of Contents Part Number Index
288-340P - 4 - 11/20/12
Table of Contents Part Number Index
11/20/12 - 5 - 288-340P
Table of Contents Part Number Index
Box To Frame
(Applies to 1510HDF, 2010HDF, 2510HDF only)
29597
288-340P - 6 - 11/20/12
Table of Contents Part Number Index
Box To Frame
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg29597
LH 20FT BOX & LID ASSY 118-713L1.
LH 24' BOX AND LID ASSY 118-704L1.
1525P LH BOX & LID ASSY 118-951L1.
RH 20FT BOX & LID ASSY 118-715L2.
RH 24' BOX AND LID ASSY 118-705L2.
1525P RH BOX & LID ASSY 118-952L2.
HHCS 1/2-13X1 1/4 GR5 802-034C3.
WASHER LOCK SPRING 1/2 PLT 804-015C4.
NUT HEX 1/2-13 PLT 803-020C5.
HHCS 5/8-11X3 GR5 802-059C6.
WASHER LOCK SPRING 5/8 PLT 804-022C7.
NUT HEX 5/8-11 PLT 803-021C8.
FRAME, 3PT 20-P 117-058H9.
FRAME, 3PT 24-P 117-062H9.
PIN HITCH 1 1/8 X 8 1/2 SP HD 805-332C10.
PIN COTTER7/32 X 2 805-060C11.
HITCH PIN SUPPORT INSERT 117-059H12.
LIGHT HARNESS, 15' WISHBONE 890-648C13.
LIGHT HARNESS, 5' LEAD 890-640C14.
CABLE TIE .19X14.25 3DIA 50LB 800-060C15.
PIN 1 1/2 X 7 1/4 USEABLE, PLT 117-323D16.
PIN HTCH 1X4 1/2 USLB W/KEEPER 805-077C17.
AG LIGHT HARNESS, EXT-15' 890-600C18.
STAND WELDMENT 119-281H19.
PIN WIRE SNAP LOCK 1/2 X 3 1/2 805-232C20.
20P LOWERHITCH BUSHING 117-378D25.
Box Assembly
Revision Comments Part Description Part No. Ref.
Shown LH 15FT BOX & LID ASSY 118-714L1.
Shown RH 15FT BOX & LID ASSY 118-716L2.
Shown FRAME, 3PT 15-P 117-057H9.
15' only 15P STAND MOUNT 119-282H21.
20' only FRAME STAND MOUNT 401-006H21.
15' only U-BOLT 1/2-13 X 2 1/32 X 6 1/2 806-163C22.
20' only U-BOLT 5/8-11 X 7 1/32 X 6 1/2 806-053C22.
15' only WASHER LOCK SPRING 1/2 PLT 804-015C23.
20' only WASHER LOCK SPRING 5/8 PLT 804-022C23.
15' only NUT HEX 1/2-13 PLT 803-020C24.
20' only NUT HEX 5/8-11 PLT 803-021C24.
20' only BM CAT II 3PT HITCH PIN KIT 173-170A26.
20' only CAT II LOWER PIN BUSHING SHORT 173-165D27.
20' only CAT II LOWER PIN BUSHING LONG 173-166D28.
20' only PIN ROLL 5/16 X 1 3/4 PLT 805-177C29.
20' only PIN HAIR COTTER .243 WIRE PLT 805-167C30.
20' only PIN 1 1/8 x 7 1/2 USABLE 805-215C31.
20' only BUSHING CYL 1 1/4 X 1 X 1 890-005C32.
11/20/12 - 7 - 288-340P
Table of Contents Part Number Index
Box to Frame for 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
20404
288-340P - 8 - 11/20/12
Table of Contents Part Number Index
Box to Frame for 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg20404
LH 2520P BOX AND LID ASSY 118-892L1.
RH 2520P BOX AND LID ASSY 118-889L2.
HHCS 1/2-13X1 1/4 GR5 802-034C3.
WASHER LOCK SPRING 1/2 PLT 804-015C4.
NUT HEX 1/2-13 PLT 803-020C5.
2520P 3-PT FRAME WLMT 117-088H6.
2520P 3-PT FRAME WELDMENT 117-102H6.
PIN HITCH 1 1/4 X 4 1/2 805-119C7.
PIN HAIR COTTER .243 WIRE PLT 805-167C8.
3-PT SIDE PLAY BUSHING 148-059D9.
PIN HITCH 1 7/16 X 8 3/8 PLT 805-168C10.
LIGHT HARNESS, 5' LEAD 890-640C11.
LIGHT HARNESS, 15' WISHBONE 890-648C12.
CABLE TIE .19X14.25 3DIA 50LB 800-060C13.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 9 - 288-340P
Table of Contents Part Number Index
Box Components
(Applies to 1510HDF, 2010HDF, 2510HDF only)
24491
288-340P - 10 - 11/20/12
Table of Contents Part Number Index
Box Components
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg24491
SEED BOX PARTITION 118-402D1.
SEED BOX PARTITION 118-642D1.
BEARING CUTOUTCOVER, 47 MST 118-403D2.
SEED BOX IDLER COVER RH 118-487D3.
SEED BOX IDLER COVER LH 118-486D3.
HANDLE 119-190D4.
DUAL AG LIGHTS RH 890-312C5.
DUAL AG LIGHTS LH 890-311C5.
HHCS 3/8-16X1 1/4 GR5 802-079C6.
RHSNB 5/16-18X3/4 GR5 802-092C7.
NUT HEX 1/2-10 ACME PLT 803-203C8.
HFS 5/16-18X3/4 GR5 802-387C9.
HFS 3/8-16X1 GR5 802-388C10.
NUT LOCK 5/16-18 PLT 803-011C11.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C12.
NUT HEX FLANGE 5/16-18 PLT 803-199C13.
NUT FLANGE LOCK 3/8-16 PLT 803-209C14.
WASHER FLAT 3/8 USS PLT 804-011C15.
WASHER LOCK SPRING 3/8 PLT 804-013C16.
12' EWNT LIGHT BRACKET 150-138D17.
SCR HEX SELF TAP 1/4-20X1TYPEF 801-151C18.
MANUAL PAK MOUNTING PLATE 248-251D21.
MANUAL PAK 1'" W/ GASKET 817-516C22.
NUT HEX FLNG T-LOCK 1/4-20 YLW 803-293C23.
MINI END WHEEL PRESS WHEEL 817-042C24.
HHCS 1/4-20X3/4 GR5 802-004C25.
Box Assembly
Revision Comments Part Description Part No. Ref.
15' LH 15' SEED BOX LH 118-414H19.
20' LH 20' SEED BOX LH 118-413H19.
24' LH & RH 12' SEED BOX 118-415H19.
15' RH 15' SEED BOX RH 118-453H20.
20' RH 20' SEED BOX RH 118-452H20.
11/20/12 - 11 - 288-340P
Table of Contents Part Number Index
Box Components for 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
27131
288-340P - 12 - 11/20/12
Table of Contents Part Number Index
Box Components for 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg27131
SEED BOX PARTITION 118-642D1.
12' SEED BOX 118-415H2.
BEARING CUTOUTCOVER, 47 MST 118-403D3.
HHCS 5/8-11X1 1/4 GR5 802-050C4.
HANDLE 119-190D5.
DUAL AG LIGHTS RH 890-312C6.
WASHER FLAT 5/16 SAE PLT 804-036C7.
HFSS 1/2-13X1 1/2 GR5 802-203C8.
HFS 5/16-18X3/4 GR5 802-387C9.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C10.
NUT HEX FLANGE 5/16-18 PLT 803-199C11.
RHSNB 5/16-18X1 GR5 802-282C12.
NUT HEX 5/16-18 PLT 803-008C13.
12' EWNT LIGHT BRACKET 150-138D14.
SCR HEX SELF TAP 1/4-20X1TYPEF 801-151C15.
BOX PARTITION UPPER PAD 118-052H16.
HHCS 1/4-20X3/4 GR5 802-004C17.
MINI END WHEEL PRESS WHEEL 817-042C18.
MANUAL PAK 1'" W/ GASKET 817-516C19.
NUT HEX LOCK 1/4-20 FLG 803-088C20.
MANUAL PAK MOUNTING PLATE 248-251D21.
NUT HEX 5/8-11 PLT 803-021C22.
WASHER LOCK SPRING 5/16 PLT 804-009C23.
WASHER LOCK SPRING 5/8 PLT 804-022C24.
Box Assembly
Revision Comments Part Description Part No. Ref.
Shown DUAL AG LIGHTS LH 890-311C6.
11/20/12 - 13 - 288-340P
Table of Contents Part Number Index
Lid To Box
(Applies to 1510HDF, 2010HDF, 2510HDF only)
18384
288-340P - 14 - 11/20/12
Table of Contents Part Number Index
Lid To Box
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg18384
LATCH CASTING MACHINED 119-153D1.
LID HANDLE 119-154D2.
LID HINGE ASSEMBLYPS25120 313-076S4.
HHCS 3/8-16X1 GR5 802-017C5.
HHCS 5/16-18X1 1/4 NYL 802-425C6.
NUT LOCK 5/16-18 PLT 803-011C7.
NUT FLANGE LOCK 3/8-16 PLT 803-209C8.
WASHER FLAT 3/8 USS PLT 804-011C9.
WASHER FLAT 5/16 SAE PLT 804-036C10.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C11.
12-20 X 90 LB GAS SPRING 890-221C12.
BALL STUD 10MM X 5/16-18 X 1/2 800-121C13.
LID HINGE PIVOT 313-186D14.
LID HINGE BASE PLATE 313-176D15.
RHSNB 3/8-16X2 GR5 802-411C16.
Box Assembly
Revision Comments Part Description Part No. Ref.
Applies to 1510HDF LID 76 7/8 SEED 119-230H3.
Applies to 2010HDF LID 106 SEED 119-229H3.
Applies to 2510HDF LID 126 11/16 SEED 119-231H3.
11/20/12 - 15 - 288-340P
Table of Contents Part Number Index
Fertilizer Box Mount 15 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
26472
288-340P - 16 - 11/20/12
Table of Contents Part Number Index
Fertilizer Box Mount 15 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg26472
3PT 15' FERT BOX L.H. 142-584H1.
3PT 15' FERT BOX R.H. 142-585H1.
HFSS 1/2-13X1 1/2 GR5 802-203C2.
HANDLE 119-190D3.
HHCS 1/2-13X1 GR5 802-258C4.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C5.
HFS 3/8-16X1 GR5 802-388C6.
NUT FLANGE LOCK 3/8-16 PLT 803-209C7.
WASHER LOCK SPRING 1/2 PLT 804-015C8.
NUT HEX 1/2-13 PLT 803-020C9.
SEED BOX REINFORCEMENT STRAP 123-520D10.
SMV MOUNT BRACKET 133-060D11.
SCREW RD HD 1/4-20 X 5/8 801-018C12.
NUT-HEX 1/4-20 PLT 803-006C13.
WASHER LOCK SPRING 1/4 PLT 804-006C14.
U-BOLT 3/8-16 X 2 X 2 3/4 806-004C15.
NUT HEX 3/8-16 PLT 803-014C16.
WASHER LOCK SPRING 3/8 PLT 804-013C17.
DECAL SLOWMOVING-GALV. BACKED 818-055C18.
FLEX COUPLER 2 TAB 3/4 HEXSHFT 142-604H19.
FERT BOX MOUNT BRACKET 142-256D20.
FERT BOX PARTITION 142-236D21.
HFS 5/16-18X3/4 GR5 802-387C22.
NUT HEX FLANGE 5/16-18 PLT 803-199C23.
HHCS 5/8-11X3 GR5 802-059C24.
WASHER LOCK SPRING 5/8 PLT 804-022C25.
NUT HEX 5/8-11 PLT 803-021C26.
HHCS 1/2-13X1 1/4 GR5 802-034C27.
Box Assembly
Revision Comments Part Description Part No. Ref.
Applies to 1510HDF-1810,
1510HDF-2475 & 7 1/2" spacing
11/20/12 - 17 - 288-340P
Table of Contents Part Number Index
Fertilizer Box Mount 20 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
26489
288-340P - 18 - 11/20/12
Table of Contents Part Number Index
Fertilizer Box Mount 20 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg26489
3PT 20' FERT BOX L.H. 142-582H1.
3PT 20' FERT BOX R.H. 142-583H1.
HFSS 1/2-13X1 1/2 GR5 802-203C2.
HANDLE 119-190D3.
HHCS 1/2-13X1 GR5 802-258C4.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C5.
HFS 3/8-16X1 GR5 802-388C6.
NUT FLANGE LOCK 3/8-16 PLT 803-209C7.
WASHER LOCK SPRING 1/2 PLT 804-015C8.
NUT HEX 1/2-13 PLT 803-020C9.
SEED BOX REINFORCEMENT STRAP 123-520D10.
SMV MOUNT BRACKET 133-060D11.
SCREW RD HD 1/4-20 X 5/8 801-018C12.
NUT-HEX 1/4-20 PLT 803-006C13.
WASHER LOCK SPRING 1/4 PLT 804-006C14.
U-BOLT 3/8-16 X 2 X 2 3/4 806-004C15.
NUT HEX 3/8-16 PLT 803-014C16.
WASHER LOCK SPRING 3/8 PLT 804-013C17.
DECAL SLOWMOVING-GALV. BACKED 818-055C18.
HHCS 1/2-13X1 1/4 GR5 802-034C19.
FERT BOX MOUNT BRACKET 142-256D20.
FERT BOX PARTITION 142-236D21.
HFS 5/16-18X3/4 GR5 802-387C22.
NUT HEX FLANGE 5/16-18 PLT 803-199C23.
HHCS 5/8-11X3 GR5 802-059C24.
WASHER LOCK SPRING 5/8 PLT 804-022C25.
NUT HEX 5/8-11 PLT 803-021C26.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 19 - 288-340P
Table of Contents Part Number Index
Fertilizer Lid Assembly 15 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
12444
288-340P - 20 - 11/20/12
Table of Contents Part Number Index
Fertilizer Lid Assembly 15 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg12444
LID 76 7/8 FERTILIZER 119-233H1.
LID HANDLE 142-141D2.
WASHER FLAT 5/16 SAE PLT 804-036C3.
HHCS 5/16-18X1 1/4 NYL 802-425C4.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C5.
LATCH CASTING MACHINED 119-153D6.
NUT LOCK 5/16-18 PLT 803-011C7.
BALL STUD 10MM X 5/16-18 X 1/2 800-121C8.
9 1/4-15 X 70LB GAS SPRING 890-308C9.
RHSNB 3/8-16X2 GR5 802-411C10.
FERT BOX LID HINGE L.H. 142-263D11.
FERT BOX LID HINGE R.H. 142-264D11.
LID HINGE PIVOT 313-186D12.
NUT FLANGE LOCK 3/8-16 PLT 803-209C13.
RHSNB 3/8-16X1 GR5 802-015C14.
HFS 3/8-16X1 GR5 802-388C15.
NUT HEX 3/8-16 PLT 803-014C16.
WASHER LOCK SPRING 3/8 PLT 804-013C17.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 21 - 288-340P
Table of Contents Part Number Index
Fertilizer Lid Assembly 20 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
26490
288-340P - 22 - 11/20/12
Table of Contents Part Number Index
Fertilizer Lid Assembly 20 ft
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg26490
LID 106 FERTILIZER 119-232H1.
LID HANDLE 142-141D2.
WASHER FLAT 5/16 SAE PLT 804-036C3.
HHCS 5/16-18X1 1/4 NYL 802-425C4.
SPRING .540 O.D.X 1 1/4 X.054W 807-106C5.
LATCH CASTING MACHINED 119-153D6.
NUT LOCK 5/16-18 PLT 803-011C7.
BALL STUD 10MM X 5/16-18 X 1/2 800-121C8.
9 1/4-15 X 70LB GAS SPRING 890-308C9.
RHSNB 3/8-16X2 GR5 802-411C10.
FERT BOX LID HINGE L.H. 142-263D11.
FERT BOX LID HINGE R.H. 142-264D11.
LID HINGE PIVOT 313-186D12.
NUT FLANGE LOCK 3/8-16 PLT 803-209C13.
RHSNB 3/8-16X1 GR5 802-015C14.
HFS 3/8-16X1 GR5 802-388C15.
NUT HEX 3/8-16 PLT 803-014C16.
WASHER LOCK SPRING 3/8 PLT 804-013C17.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 23 - 288-340P
Table of Contents Part Number Index
Seed Level Indicator
(Applies to 1510HDF, 2010HDF, 2510HDF only)
17709
288-340P - 24 - 11/20/12
Table of Contents Part Number Index
Seed Level Indicator
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg17709
SEED LEVEL ARM, 6 3/4R. TAB 118-474H1.
SEED FLOAT DOWN FLOATSTOP 118-498D2.
FOAM FLOAT 197-089D3.
FOAM FLOAT WASHER 197-096D4.
HFS 10-24 X 1 1/8 PLTD 801-096C5.
SCR HEX HD SHT MET #8 X 1/2 801-154C6.
NUT HEX 10-24 PLT 803-001C7.
NUT HEX NYLOCK 1/4-20 803-255C8.
WASHER FLAT 1/4 USS PLT 804-075C9.
PIN COTTER1/8 X 3/4 805-067C10.
SEED LEVEL BUSHING 817-086C11.
SEED LEVEL ARM MOUNT 817-202C12.
SEED LEVEL INDICATOR 817-350C13.
DECAL SEED LEVEL LH 838-237C14.
CABLE 3/64 X 11 5/8 W/ EYELETS 890-305C15.
WASHER INTERNAL STAR #10 PLT 804-004C16.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 25 - 288-340P
Table of Contents Part Number Index
Seed Level Indicator For 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
19187
288-340P - 26 - 11/20/12
Table of Contents Part Number Index
Seed Level Indicator For 2510HDF
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg19187
SEED LEVEL ARM, 6 3/4R. TAB 118-474H1.
FOAM FLOAT 197-089D2.
SEED LEVEL CHAIN BRACKET 197-091D3.
FOAM FLOAT WASHER 197-096D4.
RIVET POP 1/8X.265LG FLG 800-101C5.
HFS 10-24 X 1 1/8 PLTD 801-096C6.
SCR HEX HD SHT MET #8 X 1/2 801-154C7.
NUT HEX 10-24 PLT 803-001C8.
NUT HEX NYLOCK 1/4-20 803-255C9.
WASHER INTERNAL STAR #10 PLT 804-004C10.
WASHER FLAT 1/4 USS PLT 804-075C11.
PIN COTTER1/8 X 3/4 805-067C12.
SEED LEVEL BUSHING 817-086C13.
SEED LEVEL ARM MOUNT 817-202C14.
SEED LEVEL INDICATOR 817-350C15.
CABLE 3/64 X 11 5/8 W/ EYELETS 890-305C16.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 27 - 288-340P
Table of Contents Part Number Index
Small Seeds Box & Lid Assembly
(Applies to 1510HDF, 2010HDF, 2510HDF only)
26084
288-340P - 28 - 11/20/12
Table of Contents Part Number Index
Small Seeds Box & Lid Assembly
(Applies to 1510HDF, 2010HDF, 2510HDF only)
Image No. dwg26084
3PT 15'-7 1/2 SML SDS BOX LH 123-778H1.
3PT 15'-7 1/2 SML SDS BOX RH 123-779H1.
3PT 15'-8 SML SDS BOX LH 123-780H1.
3PT 15'-10 SML SDS BOX LH 123-782H1.
3PT 15'-10 SML SDS BOX RH 123-783H1.
3PT 20'-7 1/2 SML SDS BOX LH 123-788H1.
3PT 20'-7 1/2 SML SDS BOX RH 123-789H1.
3PT 20'-8 SML SDS BOX LH 123-790H1.
3PT 20'-10 SML SDS BOX LH 123-792H1.
3PT 20'-10 SML SDS BOX RH 123-793H1.
NUT HEX 10-24 PLT 803-001C2.
WASHER LOCK #10 804-054C3.
WASHER FLAT #10 SAE PLT 804-046C4.
SCREW RD HD SLT10-24X1/2 PLT 801-003C5.
3PT 15' SML SDS BOX LID 123-825H6.
3PT 20' SML SDS BOX LID 123-826H6.
RMVBL SMALL SEED BOX PARTITION 123-409D7.
LATCH KEEPER 37-15-061-17 816-113C8.
RIVET POP 1/8X.265LG FLG 800-101C9.
HHCS 1/4-20X5/8 GR5 802-078C10.
NUT-LOCK 1/4-20 PLT 803-007C11.
SEED ADJUSTMENT SUPPORT 123-118D12.
RUBBER LATCH 37-11-065-10 816-112C13.
10' EWNT SGS LID LATCH 123-356D14.
DECAL SMALL SEEDS DANGER 838-467C15.
SEED CUP COVER 123-190D16.
SML SDS DRIVE SPKT HUB 27T 123-834H17.
HHCS 1/4-20X1 GR5 802-005C18.
NUT HEX LOCK 1/4-20 FLG 803-088C19.
HANGER DRIVE SHAFT 817-026C20.
WASHER FLAT 1 3/8X.876X.048 TH 804-044C21.
SNAP RING .875 800-028C22.
3PT SMLSDS 15'-7.5CUP SHFT LH 123-500D23.
PIN COTTER1/8 X 3/4 805-067C24.
WASHER GRASS SEEDER CUP SHAFT 804-042C25.
GRASS SEEDER SLEEVE 817-009C26.
SML SEED FEEDER CUP ASSY 817-504C27.
NUT-HEX 1/4-20 PLT 803-006C28.
GRASS SEEDER SPROCKET 817-010C29.
WASHER FLAT 3/8 SAE PLT 804-012C30.
3/8 SHAFT LOCKING COLLAR 890-349C31.
SCREW SET 5/16-18 SKT KP X 3/8 801-035C32.
PIN COTTER5/32 X 1 PLT 805-019C33.
WASHER LOCK SPRING 1/4 PLT 804-006C34.
REAR SEED RATE ADJ HANDLE WLD 123-476H35.
NUT WING 5/16-18 803-058C36.
LOCK TAB 123-113D37.
ADJUSTMENT HANDLE PIVOT 123-050H38.
SEED ADJUSTMENT SPOOL 123-116D39.
SEED ADJUSTMENT GUIDE 819-041C40.
SCREW RD HD 8-32 X 3/8 BRASS 801-001C41.
WASHER FLAT #8 BRASS 804-003C42.
WASHER INTERNAL STAR #8 BRASS 804-002C43.
NUT HEX 8-32 BRASS 803-035C44.
GAUGE MOUNTING BRACKET 123-410D45.
FLEX COUPLER 3/8 SQUARE BORE 123-532D46.
DECAL GRSSDR SD RATE ADJ INSTR 818-207C47.
Box Assembly
Revision Comments Part Description Part No. Ref.
11/20/12 - 29 - 288-340P
Table of Contents Part Number Index
Small Seeds Box & Lid Assembly (continued)
(Applies to 1510HDF, 2010HDF, 2510HDF only)
SMALL SEEDS CUP WIND SHIELD 817-806C 48.
Revision Comments Part Description Part No. Ref.
288-340P - 30 - 11/20/12