Great Plains 1525P User Manual

Table of Contents Part Number Index

Parts Manual

Precision Seeding System

1510HDP & 1525P

Read the Operator's manual entirely.When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception.Your life and the
lives of others depend on it!

23034

Cover illustration may show optional equipment not supplied with standard unit.

© Copyright 2014 Printed 01/14/14 118-949P

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................6

Using This Manual...............................................................6

Manual Replacement Information.......................................6

Manual Revisions................................................................6

Touch-up Paint....................................................................6

Hardware Legend................................................................7

Replacement Hardware......................................................7

Serial Numbers...................................................................7

Part Number Service Coding..............................................7

Box Assembly................................................................8

Box To Frame......................................................................8

Box Components...............................................................10

Lid To Box..........................................................................12

Seed Level Indicator..........................................................14

Fertilizer Box Mount..........................................................16

Fertilizer Lid Assembly......................................................18

Walkboard And Ladder......................................................20

Walkboard And Ladder With Fertilizer...............................22

Metering System..........................................................24

HD10 & 25 Series Singulating Meter................................24

25 Series Corn Meter........................................................28

12FP Corn Meter (890-856C)...........................................30

6FP Corn Meter (890-857C).............................................32

Seed Tray With Telescoping Tubes....................................34

Fertilizer Metering.............................................................36

Fertilizer Trays, Gates & Shafts.........................................38

Fertilizer Tray Adjustment..................................................40

Drive.............................................................................42

Single Gauge Wheel.........................................................42

Gauge Wheel LH...............................................................44

Gauge Wheel RH..............................................................46

Gauge Wheel Transmission...............................................48

Fertilizer Drive...................................................................50

Openers........................................................................52

25 Series Opener Arms & Mounts....................................52

25 Series Opener Body.....................................................56

HD10 Series Opener Arms & Mounts...............................60

HD10 Series Opener Body................................................64

HD10 Fertilizer hose Retainer...........................................66

Side Depth Wheel Assembly.............................................68

25 Series Side Depth Wheel Scraper Assembly...............70

25 Series Seed-Lok...........................................................72

HD10 & 25 Series Keeton Seed Firmer (Option)..............74

Coulter Blade Arm Weldment............................................76

Hub Assembly (204-084S)................................................78

Press Wheels...............................................................80

1 1/4" x 13 1/2" Double Press Wheel................................80

1" x 12" Double "V" Press Wheel......................................82

2" x 12 1/2" Double Press Wheel......................................84

© Copyright 2014 All rights reserved Printed 01/14/14

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes
the state of this product at the time of its publication, and may not reflect the product in the future.

The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains

All other brands and product names are trademarks or registered trademarks of their respective holders.

Great Plains Manufacturing, Incorporated Trademarks

Printed in the United States of America.

2" x 13" Single Press Wheel..............................................86

3" x 13" Single Press Wheel..............................................88

25 Series 16 Degree Press wheel Assembly (S/N

11325C-).....................................................................90

25 Series 16 Degree Press Wheel Assembly (S/N 11326C -

11485C)......................................................................92

25 Series 16 Degree Press Wheel Assembly (S/N

11486C+)....................................................................94

25 Series 20 Degree Press Wheel Assembly (S/N

11325C-).....................................................................96

25 Series 20 Degree Press Wheel Assembly (S/N 11326C -

11485C)......................................................................98

25 Series 20 Degree Press Wheel Assembly (S/N

11486C+)..................................................................100

25 Series Press Wheel Assembly Breakdowns..............102

25 Series Press Wheel Assembly LH Short (S/N

11325C-)...................................................................104

25 Series Press Wheel Assembly LH Short (S/N 11326C -

11485C)....................................................................106

25 Series Press Wheel Assembly LH Short (S/N

11486C+)..................................................................108

25 Series Press Wheel Assembly RH Long (S/N

11325C-)...................................................................110

25 Series Press Wheel Assembly RH Long (S/N 11326C -

11485C)....................................................................112

25 Series Press Wheel Assembly RH Long (S/N

11486C+)..................................................................114

25 Series Press Wheel Assembly With Spider Wheels (S/N

11485C-)...................................................................116

25 Series Press Wheel Assembly With Spider Wheels (S/N

11486C+)..................................................................118

25 Series Press Wheel Assembly Breakdowns..............120

Markers (Option)........................................................122

Flat Fold Marker..............................................................122

Marker Carrier.................................................................124

Marker Disk And Hub (113-563S)...................................126

Flat Fold Dual Marker Hydraulics....................................128

Flat Fold Marker Sequence Valve Hydraulics..................130

Hydraulic Cylinder 2 x 20 x 1.12 (810-205C)..................132

Sequence Valve (810-197C)...........................................134

Veris Drive (Option)...................................................136

Veris Drive To Frame.......................................................136

Veris Drive Components.................................................138

Veris Drive Controller......................................................140

Monitor (Option)........................................................142

Monitor 833-365C (10" Spacing, Twin Row 30 With

Splitter).....................................................................142

Monitor 833-281C (Twin Row 30" Spacing)....................144

Monitor 833-284C (15" Spacing).....................................146

Module Mount.................................................................148

118-949P - 2 - 01/14/14

Table of Contents Part Number Index

Table of Contents (continued)

Baffle (Option).......................................................150

Twin Row Baffle..........................................................150

Decals....................................................................152

Decals........................................................................152

Small Seeds (Option)............................................154

Small Seeds Box Components...................................154

Small Seeds Box Drive...............................................156

Small Seeds Box Mounting........................................158

Small Seeds Decal Placement...................................160

Small Seeds Drive......................................................162

Small Seeds Seed Tube.............................................164

Microband (Option)...............................................166

Microband Hopper Components................................166

Microband Components.............................................168

Microband Drive.........................................................170

Part Number Index................................................172

01/14/14 - 3 - 118-949P

Table of Contents Part Number Index

Alphabetized Table of Contents

Selected Models

1

1 1/4" x 13 1/2" Double Press Wheel................................80

1" x 12" Double "V" Press Wheel......................................82

12FP Corn Meter (890-856C)...........................................30

2

2" x 12 1/2" Double Press Wheel......................................84

2" x 13" Single Press Wheel..............................................86

25 Series 16 Degree Press wheel Assembly (S/N

11325C-).....................................................................90

25 Series 16 Degree Press Wheel Assembly (S/N 11326C -

11485C)......................................................................92

25 Series 16 Degree Press Wheel Assembly (S/N

11486C+)....................................................................94

25 Series 20 Degree Press Wheel Assembly (S/N

11325C-).....................................................................96

25 Series 20 Degree Press Wheel Assembly (S/N 11326C -

11485C)......................................................................98

25 Series 20 Degree Press Wheel Assembly (S/N

11486C+)..................................................................100

25 Series Corn Meter........................................................28

25 Series Opener Arms & Mounts....................................52

25 Series Opener Body.....................................................56

25 Series Press Wheel Assembly Breakdowns..............102

25 Series Press Wheel Assembly LH Short (S/N

11325C-)...................................................................104

25 Series Press Wheel Assembly LH Short (S/N 11326C -

11485C)....................................................................106

25 Series Press Wheel Assembly LH Short (S/N

11486C+)..................................................................108

25 Series Press Wheel Assembly RH Long (S/N

11325C-)...................................................................110

25 Series Press Wheel Assembly RH Long (S/N 11326C -

11485C)....................................................................112

25 Series Press Wheel Assembly RH Long (S/N

11486C+)..................................................................114

25 Series Press Wheel Assembly With Spider Wheels (S/N

11485C-)...................................................................116

25 Series Press Wheel Assembly With Spider Wheels (S/N

11486C+)..................................................................118

25 Series Seed-Lok...........................................................72

25 Series Side Depth Wheel Scraper Assembly...............70

3

3" x 13" Single Press Wheel..............................................88

6

6FP Corn Meter (890-857C).............................................32

B

Box Components...............................................................10

Box To Frame......................................................................8

C

Coulter Blade Arm Weldment............................................76

D

Decals.............................................................................152

F

Fertilizer Box Mount..........................................................16

Fertilizer Drive...................................................................50

Fertilizer Lid Assembly......................................................18

Fertilizer Metering.............................................................36

Fertilizer Tray Adjustment..................................................40

Fertilizer Trays, Gates & Shafts.........................................38

Flat Fold Dual Marker Hydraulics....................................128

Flat Fold Marker..............................................................122

Flat Fold Marker Sequence Valve Hydraulics..................130

G

Gauge Wheel LH...............................................................44

Gauge Wheel RH..............................................................46

Gauge Wheel Transmission...............................................48

H

HD10 & 25 Series Keeton Seed Firmer (Option)..............74

HD10 & 25 Series Singulating Meter................................24

HD10 Fertilizer hose Retainer...........................................66

HD10 Series Opener Arms & Mounts...............................60

HD10 Series Opener Body................................................64

Hub Assembly (204-084S)................................................78

Hydraulic Cylinder 2 x 20 x 1.12 (810-205C)..................132

L

Lid To Box..........................................................................12

M

Marker Carrier.................................................................124

Marker Disk And Hub (113-563S)...................................126

Microband Components..................................................168

Microband Drive..............................................................170

Microband Hopper Components.....................................166

Module Mount.................................................................148

Monitor 833-281C (Twin Row 30" Spacing)....................144

Monitor 833-284C (15" Spacing).....................................146

Monitor 833-365C (10" Spacing, Twin Row 30 With

Splitter).....................................................................142

S

Seed Level Indicator..........................................................14

Seed Tray With Telescoping Tubes....................................34

Sequence Valve (810-197C)...........................................134

Side Depth Wheel Assembly.............................................68

Single Gauge Wheel.........................................................42

Small Seeds Box Components.......................................154

Small Seeds Box Drive....................................................156

Small Seeds Box Mounting.............................................158

Small Seeds Decal Placement........................................160

Small Seeds Drive...........................................................162

Small Seeds Seed Tube..................................................164

118-949P - 4 - 01/14/14

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

T

Twin Row Baffle..........................................................150

V

Veris Drive Components.............................................138

Veris Drive Controller.................................................140

Veris Drive To Frame..................................................136

W

Walkboard And Ladder.................................................20

Walkboard And Ladder With Fertilizer..........................22

01/14/14 - 5 - 118-949P

Table of Contents Part Number Index

118-949P - 6 - 01/14/14

Table of Contents Part Number Index

01/14/14 - 7 - 118-949P

Table of Contents Part Number Index

Box To Frame

(Applies to 1510HDP, 1525P only)

23036

118-949P - 8 - 01/14/14

Table of Contents Part Number Index

Box To Frame

(Applies to 1510HDP, 1525P only)

Image No.dwg23036
1525P RH BOX & LID ASSY118-952L1.
1525P LH BOX & LID ASSY118-951L2.
HHCS 1/2-13X1 1/4 GR5802-034C3.
WASHER LOCK SPRING 1/2 PLT804-015C4.
NUT HEX 1/2-13 PLT803-020C5.
HHCS 5/8-11X4 1/2 GR5802-100C6.
WASHER LOCK SPRING 5/8 PLT804-022C7.
NUT HEX 5/8-11 PLT803-021C8.
15P 3PT MAIN FRAME WELDMENT117-100H9.
PIN HITCH 1 1/8 X 8 1/2 USABLE805-179C10.
PIN COTTER3/16 X 2805-058C11.
HITCH PIN SUPPORT INSERT117-059H12.

CABLE TIE .19X14.25 3DIA 50LB800-060C15.
PIN 1 1/2 X 7 1/4 USEABLE, PLT117-323D16.
PIN HITCH 1 X 4 1/2 USABLE LG805-077C17.

STAND WELDMENT119-281H19.
PIN WIRE SNAP LOCK 1/2 X 3 1/2805-232C20.
15P STAND MOUNT119-282H21.
U-BOLT 1/2-13 X 2 1/32 X 6 1/2806-163C22.
NUT HEX 1/2-13 PLT803-020C23.
WASHER LOCK SPRING 1/2 PLT804-015C24.
15P FRAME CTR BOX SUPPORT TB117-429D25.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

S/N 11780C-LIGHT HARNESS, 10' WISHBONE890-390C13.
S/N 11780C-LIGHT HARNESS, 5' LEAD890-640C14.

S/N 11780C-AG LIGHT HARNESS, EXT-15'890-600C18.

S/N 11781C+LIGHT HRNSS, 10' WISHBONE -LED833-683C26.
S/N 11781C+AG LIGHT HARNESS, EXT-15' LED833-687C27.
S/N 11781C+LIGHT HARNESS, 5' LEAD - LED833-689C28.
S/N 11781C+HHCS 1/4-20X3/4 GR5802-004C29.
S/N 11781C+7-PIN CONNECTORHOLDER833-492C30.
S/N 11781C+HHCS 1/4-20X1 1/4 GR5802-224C31.
S/N 11781C+3PT 7 PIN HOLDER117-054D32.
S/N 11781C+U-BOLT 3/8-16 X 5 1/32 X 4 1/4806-165C33.
S/N 11781C+LIGHT HRNSS ENHANCE MODULE LED833-694C34.
S/N 11781C+NUT HEX FLANGE 1/4-20 PLT803-230C35.
S/N 11781C+WASHER LOCK SPRING 3/8 PLT804-013C36.
S/N 11781C+NUT HEX 3/8-16 PLT803-014C37.
S/N 11781C+NUT HEX 1/4-20 PLT803-006C38.
S/N 11781C+WASHER LOCK SPRING 1/4 PLT804-006C39.

01/14/14 - 9 - 118-949P

Table of Contents Part Number Index

Box Components

(Applies to 1510HDP, 1525P only)

23040

118-949P - 10 - 01/14/14

Table of Contents Part Number Index

Box Components

(Applies to 1510HDP, 1525P only)

Image No.dwg23040
SEED BOX PARTITION118-642D1.
BEARING CUTOUTCOVER, 47 MST118-403D2.

SEED BOX IDLER COVER LH118-486D3.
HANDLE119-190D4.

HHCS 3/8-16X1 1/4 GR5802-079C6.
RHSNB 5/16-18X3/4 GR5802-092C7.
HFSS 1/2-13X1 1/2 GR5802-203C8.
HFS 5/16-18X3/4 GR5802-387C9.
HFS 3/8-16X1 GR5802-388C10.
NUT LOCK 5/16-18 PLT803-011C11.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C12.
NUT HEX FLANGE 5/16-18 PLT803-199C13.
NUT FLANGE LOCK 3/8-16 PLT803-209C14.
WASHER FLAT 3/8 USS PLT804-011C15.
WASHER LOCK SPRING 3/8 PLT804-013C16.
12' EWNT LIGHT BRACKET150-138D17.

15' SEED BOX RH118-453H19.
TALC LUBRICANT-5 GAL CONTAINER821-048C20.
EZEE-GLIDE PLUS LUBRICANT-5GAL821-069C20.
MANUAL PAK 1" W/ GASKET817-516C21.
NUT HEX FLANGE LOCK 1/4-20 PLT803-293C22.
MINI END WHEEL PRESS WHEEL817-042C23.
HHCS 1/4-20X3/4 GR5802-004C24.
MANUAL PAK MOUNTING PLATE248-251D25.
15' SEED BOX LH118-414H26.
LED LIGHT SUB ASY LH175-309S27.

LED LIGHT SUB ASY RH175-310S28.

LIGHT, AMBER LAMP LED833-697C29.
LIGHT, RED LAMP - LED833-696C30.
SCREW HEX SELF TAP 1/4-20X3/4801-081C31.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

ShownSEED BOX IDLER COVER RH118-487D3.

S/N 11780C-DUAL AG LIGHTS890-312C5.
S/N 11780C-DUAL AG LIGHTS890-311C5.

S/N 11780C-SCR HEX SELF TAP 1/4-20X1TYPEF801-151C18.

S/N 11781C+ Includes items 17 &

29-31

S/N 11781C+ Includes items 17 &

29-31

01/14/14 - 11 - 118-949P

Table of Contents Part Number Index

Lid To Box

(Applies to 1510HDP, 1525P only)

17708

118-949P - 12 - 01/14/14

Table of Contents Part Number Index

Lid To Box

(Applies to 1510HDP, 1525P only)

Image No.dwg17708
LATCH CASTING MACHINED119-153D1.
LID HANDLE142-141D2.
LID 76 7/8 SEED119-230H3.

HHCS 3/8-16X1 GR5802-017C5.
HHCS 5/16-18X1 1/4 NYL802-425C6.
NUT LOCK 5/16-18 PLT803-011C7.
NUT FLANGE LOCK 3/8-16 PLT803-209C8.
WASHER FLAT 3/8 USS PLT804-011C9.
WASHER FLAT 5/16 SAE PLT804-036C10.
SPRING .540 O.D.X 1 1/4 X.054W807-106C11.
12-20 X 90 LB GAS SPRING890-221C12.
BALL STUD 10MM X 5/16-18 X 1/2800-121C13.
LID HINGE PIVOT313-186D14.
LID HINGE BASE PLATE313-176D15.
RHSNB 3/8-16X2 GR5802-411C16.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

Includes 8,14,15 & 16LID HINGE ASSEMBLYPS25120313-076S4.

01/14/14 - 13 - 118-949P

Table of Contents Part Number Index

Seed Level Indicator

(Applies to 1510HDP, 1525P only)

17709

118-949P - 14 - 01/14/14

Table of Contents Part Number Index

Seed Level Indicator

(Applies to 1510HDP, 1525P only)

Image No.dwg17709
SEED LEVEL ARM, 6 3/4R. TAB118-474H1.
SEED FLOAT DOWN FLOAT STOP118-498D2.
FOAM FLOAT197-089D3.
FOAM FLOAT WASHER197-096D4.
HFS 10-24 X 1 1/8 PLTD801-096C5.
SCR HEX HD SHT MET #8 X 1/2801-154C6.
NUT HEX 10-24 PLT803-001C7.
NUT HEX NYLOCK 1/4-20803-255C8.
WASHER FLAT 1/4 USS PLT804-075C9.
PIN COTTER1/8 X 3/4805-067C10.
SEED LEVEL BUSHING817-086C11.
SEED LEVEL ARM MOUNT817-202C12.
SEED LEVEL INDICATOR817-350C13.
DECAL SEED LEVEL LH838-237C14.
CABLE 3/64 X 11 5/8 W/ EYELETS890-305C15.
WASHER INTERNAL STAR #10 PLT804-004C16.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 15 - 118-949P

Table of Contents Part Number Index

Fertilizer Box Mount

(Applies to 1510HDP, 1525P only)

26472

118-949P - 16 - 01/14/14

Table of Contents Part Number Index

Fertilizer Box Mount

(Applies to 1510HDP, 1525P only)

Image No.dwg-26472
3PT 15' FERT BOX L.H.142-584H1.
3PT 15' FERT BOX R.H.142-585H1.
HFSS 1/2-13X1 1/2 GR5802-203C2.
HANDLE119-190D3.
HHCS 1/2-13X1 GR5802-258C4.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C5.
HFS 3/8-16X1 GR5802-388C6.
NUT FLANGE LOCK 3/8-16 PLT803-209C7.
WASHER LOCK SPRING 1/2 PLT804-015C8.
NUT HEX 1/2-13 PLT803-020C9.
SEED BOX REINFORCEMENT STRAP123-520D10.
SMV MOUNT BRACKET133-060D11.
SCREW RD HD 1/4-20 X 5/8801-018C12.
NUT-HEX 1/4-20 PLT803-006C13.
WASHER LOCK SPRING 1/4 PLT804-006C14.
U-BOLT 3/8-16 X 2 X 2 3/4806-004C15.
NUT HEX 3/8-16 PLT803-014C16.
WASHER LOCK SPRING 3/8 PLT804-013C17.
DECAL SLOWMOVING-GALV. BACKED818-055C18.

FERT BOX MOUNT BRACKET142-256D20.
FERT BOX PARTITION142-236D21.
HFS 5/16-18X3/4 GR5802-387C22.
NUT HEX FLANGE 5/16-18 PLT803-199C23.
HHCS 5/8-11X3 GR5802-059C24.
WASHER LOCK SPRING 5/8 PLT804-022C25.
NUT HEX 5/8-11 PLT803-021C26.
HHCS 1/2-13X1 1/4 GR5802-034C27.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

7 1/2" SpacingFLEX COUPLER 2 TAB 3/4 HEXSHFT142-604H19.
10" SpacingEXTENDED FERTFLEX COUPLER142-253H19.

01/14/14 - 17 - 118-949P

Table of Contents Part Number Index

Fertilizer Lid Assembly

(Applies to 1510HDP, 1525P only)

12444

118-949P - 18 - 01/14/14

Table of Contents Part Number Index

Fertilizer Lid Assembly

(Applies to 1510HDP, 1525P only)

Image No.dwg12444
LID 76 7/8 FERTILIZER119-233H1.
LID HANDLE142-141D2.
WASHER FLAT 5/16 SAE PLT804-036C3.
HHCS 5/16-18X1 1/4 NYL802-425C4.
SPRING .540 O.D.X 1 1/4 X.054W807-106C5.
LATCH CASTING MACHINED119-153D6.
NUT LOCK 5/16-18 PLT803-011C7.
BALL STUD 10MM X 5/16-18 X 1/2800-121C8.
9 1/4-15 X 70LB GAS SPRING890-308C9.
RHSNB 3/8-16X2 GR5802-411C10.
FERT BOX LID HINGE L.H.142-263D11.
FERT BOX LID HINGE R.H.142-264D11.
LID HINGE PIVOT313-186D12.
NUT FLANGE LOCK 3/8-16 PLT803-209C13.
RHSNB 3/8-16X1 GR5802-015C14.
HFS 3/8-16X1 GR5802-388C15.
NUT HEX 3/8-16 PLT803-014C16.
WASHER LOCK SPRING 3/8 PLT804-013C17.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 19 - 118-949P

Table of Contents Part Number Index

Walkboard And Ladder

(Applies to 1510HDP, 1525P only)

23037

118-949P - 20 - 01/14/14

Table of Contents Part Number Index

Walkboard And Ladder

(Applies to 1510HDP, 1525P only)

Image No.dwg23037
3-PT STEP RETAINER119-032D1.
WRENCH HOLDER403-175H2.
WALKBOARDPIVOT BASE119-254D3.
WALKBOARD17.25 X 89.75119-306D4.
WALKBOARDHINGE WELDMENT119-277H5.
WALKBOARDLADDER PIVOTBUSHING119-278D6.
WALKBOARDHINGED END MOUNT LH119-292H7.

3PT HINGED WALKBOARD LADDER119-294H8.
SPRING AND WHEEL WRENCH403-265D9.
HHCS 3/8-16X1 GR5802-017C10.
HHCS 3/8-16X1 1/4 GR5802-079C11.
HHCS 1/2-13X1 1/2 GR5802-091C12.
HFS 3/8-16X1 GR5802-388C13.
NUT HEX 3/8-16 PLT803-014C14.
NUT LOCK 1/2-13 PLT803-019C15.
NUT HEX 1/2-13 PLT803-020C16.
NUT FLANGE LOCK 3/8-16 PLT803-209C17.
WASHER FLAT 3/8 USS PLT804-011C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
WASHER FLAT 1/2 SAE PLT804-016C21.
PIN HAIR COTTER .148 WIRE805-032C22.
PIN CLEVIS 1/2 X 1 3/4805-127C23.
PIN HAIR COTTER .120 PLT805-143C24.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C25.
U-BOLT 3/8-16 X 2 1/32 X 3806-166C26.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

ShownWALKBOARDHINGED END MOUNT RH119-293H7.

01/14/14 - 21 - 118-949P

Table of Contents Part Number Index

Walkboard And Ladder With Fertilizer

(Applies to 1510HDP, 1525P only)

26475

118-949P - 22 - 01/14/14

Table of Contents Part Number Index

Walkboard And Ladder With Fertilizer

(Applies to 1510HDP, 1525P only)

Image No.dwg-26475
3-PT STEP RETAINER119-032D1.
WRENCH HOLDER403-175H2.
EXT WALKBOARD PIVOT BASE WIDE119-033D3.
WALKBOARD17.25 X 89.75119-306D4.
WALKBOARDHINGE WELDMENT119-277H5.
WALKBOARDLADDER PIVOTBUSHING119-278D6.
WALKBOARDHINGED END MOUNT LH119-292H7.
WALKBOARDHINGED END MOUNT RH119-293H7.
3PT HINGED WALKBOARD LADDER119-294H8.
SPRING AND WHEEL WRENCH403-265D9.
HHCS 3/8-16X1 GR5802-017C10.
HHCS 3/8-16X1 1/4 GR5802-079C11.
HHCS 1/2-13X1 1/2 GR5802-091C12.
HFS 3/8-16X1 GR5802-388C13.
NUT HEX 3/8-16 PLT803-014C14.
NUT LOCK 1/2-13 PLT803-019C15.
NUT HEX 1/2-13 PLT803-020C16.
NUT FLANGE LOCK 3/8-16 PLT803-209C17.
WASHER FLAT 3/8 USS PLT804-011C18.
WASHER LOCK SPRING 3/8 PLT804-013C19.
WASHER LOCK SPRING 1/2 PLT804-015C20.
WASHER FLAT 1/2 SAE PLT804-016C21.
PIN HAIR COTTER .148 WIRE805-032C22.
PIN CLEVIS 1/2 X 1 3/4805-127C23.
PIN HAIR COTTER .120 PLT805-143C24.
U-BOLT 1/2-13 X 2 X 3 GR 5806-005C25.
U-BOLT 3/8-16 X 2 1/32 X 3806-166C26.
WALKBOARDEXTENSIONS - WIDE119-005H27.
FERTILIZER BOX CTR SUPT BRKT119-039D28.
HHCS 5/8-11X5 GR5802-062C29.
NUT HEX NYLOCK 5/8-11 PLT803-148C30.

Box Assembly

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 23 - 118-949P

Table of Contents Part Number Index

HD10 & 25 Series Singulating Meter

(Applies to 1510HDP, 1525P only)

21858

118-949P - 24 - 01/14/14

Table of Contents Part Number Index

HD10 & 25 Series Singulating Meter

(Applies to 1510HDP, 1525P only)

Image No.dwg21858
25S SINGULATOR METER BACK PLT403-147D1.
OVER CENTER LATCH800-137C2.
HFSS 1/4-20X3/4 GR5802-257C3.
WASHER LOCK SPRING 1/4 PLT804-006C4.
NUT-HEX 1/4-20 PLT803-006C5.
PIN COTTER3/32 X 1/2805-307C6.
HWHSTS #10-24X1/2 TYPE F SCREW801-160C7.
PIN HAIR COTTER .059W 15/16LG805-302C8.
WASHER LOCK SPRING 5/16 PLT804-009C9.
NUT HEX 5/16-18 PLT803-008C10.
BRG .63ID PRESS WHL ASY822-170C11.
NUT HEX THIN 5/8-18 X 3/16 PLT803-345C12.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C13.
PIN CLEVIS 1/4 X 2 ADJUSTABLE805-298C14.
WASHER FLAT 1/4 SAE PLT804-007C15.
METER FRONT CAP817-403C16.
METER REAR CAP817-404C17.
METER CLEANOUT DOOR817-402C18.
METER CLEANOUT SPACER817-548C19.
HHCS 5/16-18X1 GR5802-159C20.
PSS METER HUB403-056D21.
SPRING COMP .39ODX.75LGX.047W807-186C22.
SPRING COMP .39ODX.69LX.043WSS807-194C23.
PSS METER SPACERSHIELD817-549C24.
25S SINGULATOR METER OUTER PLT403-148D25.
WASHER MACH 1.00 X .625 X 14GA804-111C26.
PIN CLEVIS 1/4X1 31/64 USBL805-296C27.
PIN ROLL 1/4 X 2 LG PL805-146C28.
PSS METER Q/C DRIVE SHAFT403-117D29.
PSS METER WHEEL SUPPORT PLATE403-058D30.
PRECISION METER DUST FLAP817-564C31.
LOWER SEED TUBE GROMMET816-436C32.
METER TOPCAP403-114D33.
PIN CLEVIS 1/4 X 2 7/64 USBL805-182C34.
CORN RND 1400-1900 28CELL-GRN403-127D35.
CORN RND 1700-2200 28CELL-GRN403-128D35.
CORN FLT 1500-1675 28CELL-GRN403-131D35.
CORN FLT 1625-1800 28CELL-GRN403-132D35.
CORN RND 1400-1700 42CELL-GRN403-129D35.
CORN RND 1700-2000 42CELL-GRN403-130D35.
COTTONWHEEL 4000-4600-GRN403-133D35.
COTTONWHEEL 4600-5200-GRN403-134D35.
COTTONWHEEL 5200-6000-GRN403-135D35.
MILO WHEEL 51 CELL-GRN403-136D35.
MILO WHEEL 135 CELL-GRN403-140D35.
MILO WHEEL 135 CELL-GRN403-138D35.
MILO WHEEL 102 CELL-GRN403-137D35.
MILO WHEEL 270 CELL-GRN403-141D35.
MILO WHEEL 270 CELL-GRN403-139D35.
PSS HIGH RATE RICE-RIBBON403-095D35.
PSS MED RATE RICE-RIBBON403-142D35.
MED RATE RICE-RIBBON-GRN403-143D35.
HIGH RATE RICE-RIBBON-GRN403-121D35.
SOYBEANWHEEL 1700-2200-GRN403-122D35.
SOYBEANWHEEL 2200-2700-GRN403-123D35.
SOYBEANWHEEL 2700-3200-GRN403-124D35.
SOYBEANWHEEL 3100-3800-GRN403-125D35.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 25 - 118-949P

Table of Contents Part Number Index

HD10 & 25 Series Singulating Meter (continued)

(Applies to 1510HDP, 1525P only)

SOYBEANWHEEL 3600-4000-GRN403-126D35.
WHEAT WHEEL-GRN403-118D35.
WHEAT WHEEL-HIGH RATE-GRN403-119D35.
VOLUMETRIC #3-GRN403-120D35.
SPRING COMP 1.46ODX1.5X.112W807-187C36.
KNOB817-425C37.
PIN ROLL 1/8 X 1LG. PLT.805-080C38.
METER SEED CUTOFF SLIDE817-405C39.

Used with Wheel 403-095D only.FLOW GATE817-529C40.

RevisionCommentsPart DescriptionPart No.Ref.

118-949P - 26 - 01/14/14

Table of Contents Part Number Index

HD10 & 25 Series Singulating Meter (continued)

(Applies to 1510HDP, 1525P only)

This Page Intentionally Left Blank

Metering System

01/14/14 - 27 - 118-949P

Table of Contents Part Number Index

25 Series Corn Meter

(Applies to 1510HDP, 1525P only)

21857

118-949P - 28 - 01/14/14

Table of Contents Part Number Index

25 Series Corn Meter

(Applies to 1510HDP, 1525P only)

Image No.dwg21857
25P FINGER PICKUP BACKING PLT403-116D1.
WASHER FLAT 1/4 SAE PLT804-007C2.
HHCS 1/4-20X3/4 GR5802-004C3.
HFSS 1/4-20X3/4 GR5802-257C4.
NUT HEX WHIZ 1/4-20 PLT803-194C5.
FINGER PICKUP METER DUST FLAP817-565C6.
PRECISION PL 12FP CORN METER890-856C7.

PRECISION PL 6FP CORN METER890-857C7.

NUT HEX LOCK 1/4-20 FLG803-088C9.
HFSS 1/4-20X2 GR5802-448C10.
PIN CLEVIS 1/4 X 2 7/64 USBL805-182C11.
METER TOPCAP403-114D12.
PIN COTTER3/32 X 1/2805-307C13.
PIN HAIR COTTER .059W 15/16LG805-302C14.
LOWER SEED TUBE GROMMET816-436C15.
OVER CENTER LATCH800-137C16.
CLEANOUT SPRING BUSHING403-150D17.
RIVET POP 3/16 .062-.251 LF800-220C18.
METER CLEANOUT COVER SPRING403-149D19.
WASHER FENDER 3/16 X 3/4804-206C20.

METER TOPCAP BACKING PLATE403-145D22.
25P FINGER PU METER COVER ASY817-563C23.
RIVET POP 3/16 .251-.375 LF800-230C24.
NUT HEX JAM 1/4-20 PLT803-222C25.
METER SPACER TUBE403-338D26.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

Refer to page (12FP Corn Meter

(890-856C) forbreakdown

Refer to page (6FP Corn Meter

(890-857C) forbreakdown

Includes items 10, 17-2525S PREC FINGER PICKUP COVER403-125S8.

1 3/16" Cleanout HoleMETERCLEANOUT COVER817-568C21.
1 1/2" Cleanout HoleCORN METER CLEANOUT COVER817-607C21.

01/14/14 - 29 - 118-949P

Table of Contents Part Number Index

12FP Corn Meter (890-856C)

(Applies to 1510HDP, 1525P only)

28023

118-949P - 30 - 01/14/14

Table of Contents Part Number Index

12FP Corn Meter (890-856C)

(Applies to 1510HDP, 1525P only)

Image No.dwg28023
NUT HEX WHIZ 1/4-20 PLT803-194C1.
PIN COTTER5/32 X 1 1/2 LONG805-089C2.
HHCS 1/4-20X1/2 GR2802-283C3.
PIN ROLL 3/16X 1 1/2 PLT805-024C4.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C5.
HHCS 1/4-20X1 1/2 GR2802-221C6.
METER NUT COVER3430217.
5/8 METER NUT31114H10418.
FINGER ASSEMBLY 12 FINGER3430299.
METER STICKER900M0810.
POP MAX II BACK PLATE A INSERT34210311.
INSERT A34211012.

B INSERTFOR POPMAX II34210712.

C INSERTFOR POPMAX II34210812.

8-32 X 5/16 PAN HEAD SCREW3112886413.
SCREW .19 X 5/831121H129514.
ADJ BRUSHKIT34305215.
FINGER PICKUP BRUSH SCREW34303216.
DECAL 12 FINGER CORN848-118C17.
PRECISION BRG W/HOUSING34301118.
BELT HOUSING34300219.
BUSHING34300620.
ROLLER IDLER34300121.
DRIVE WHEEL PREC. PLANTING34306222.

METER COVER34300524.
PRECISION E CLIP34308925.
2007 SKIP STOP PAD34307326.
HHCS 1/4-20X1 GR5802-005C27.
HDWE FOR(4)2007 SKIP STOP PADS34309228.
REPLACED BY PRE16001134306029.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

(Option) See your GP dealer for

application. (Standard insertforCorn)

(Option) See your GP dealer for

application.

(Option) See your GP dealer for

application.

Must be orientedas shownSURE FIRE BELT34306623.

01/14/14 - 31 - 118-949P

Table of Contents Part Number Index

6FP Corn Meter (890-857C)

(Applies to 1510HDP, 1525P only)

21991

118-949P - 32 - 01/14/14

Table of Contents Part Number Index

6FP Corn Meter (890-857C)

(Applies to 1510HDP, 1525P only)

Image No.dwg21991
NUT HEX WHIZ 1/4-20 PLT803-194C1.
PIN COTTER5/32 X 1 1/2 LONG805-089C2.
HHCS 1/4-20X1/2 GR2802-283C3.
PIN ROLL 3/16X 1 1/2 PLT805-024C4.
PIN, ROLL 1/4 X 1 1/4 LONG805-208C5.
HHCS 1/4-20X1 1/2 GR2802-221C6.
METER NUT COVER3430217.
5/8 METER NUT31114H10418.
FINGER ASSEMBLY 6 FINGER CORN3430539.
STICKER900MO810.
POP MAX II BACK PLATE A INSERT34210311.
INSERT A34211012.

B INSERTFOR POPMAX II34210712.

C INSERTFOR POPMAX II34210812.

8-32 X 5/16 PAN HEAD SCREW3112886413.
SCREW .19 X 5/831121H129514.
ADJ BRUSHKIT34305215.
FINGER PICKUP BRUSH SCREW34303216.
PRECISION E CLIP34308917.
PRECISION BRG W/HOUSING34301118.
BELT HOUSING34300219.
BUSHING34300620.
ROLLER IDLER34300121.
DRIVE WHEEL PREC. PLANTING34306222.

METER COVER34300524.
REPLACED BY PRE16001134306025.
2007 SKIP STOP PAD34307326.
HHCS 1/4-20X1 GR5802-005C27.
HDWE FOR(4)2007 SKIP STOP PADS34309228.
DECAL 6 FINGER CORN848-119C29.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

(Option) See your GP dealer for

application. (Standard insertforCorn)

(Option) See your GP dealer for

application.

(Option) See your GP dealer for

application. (Standard insert for
sunflower)

Must be orientedas shownSUREFIRE SEED BELT34346623.

01/14/14 - 33 - 118-949P

Table of Contents Part Number Index

Seed Tray With Telescoping Tubes

(Applies to 1510HDP, 1525P only)

23039

118-949P - 34 - 01/14/14

Table of Contents Part Number Index

Seed Tray With Telescoping Tubes

(Applies to 1510HDP, 1525P only)

Image No.dwg23039
SEED TRAY WLD 15-P X TR30SP-10118-947H1.

UPPER SEED TUBE GROMMET816-331C2.
RPBY 800-125C800-104C3.
PSS OUTER SLIDING SEED TUBE118-539D4.

PSS INNER SLIDING SEED TB 19.5817-577C5.

PSS INNER SLIDING SEED TB 23.5817-578C5.

RPBY 800-124C800-311C6.
HHCS 3/8-16X3/4 GR5802-014C7.
OUTLET WASHER118-618D8.
WASHER LOCK SPRING 3/8 PLT804-013C9.
NUT WING 3/8-16 PLT803-231C10.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

10", Twin Row 30, Twin Row 30 with

splitter

15"SEED TRAY WLD 15-P X 15-30118-948H1.

Used on mid (7" stagger) openersPSS OUTER SLIDING SEED TB 9.42118-651D4.
Used on 25 series openers with

removable Finger pickup Meters

Used on 25 series openers with

removable Singular Plus Meters

01/14/14 - 35 - 118-949P

Table of Contents Part Number Index

Fertilizer Metering

(Applies to 1510HDP, 1525P only)

26495

118-949P - 36 - 01/14/14

Table of Contents Part Number Index

Fertilizer Metering

(Applies to 1510HDP, 1525P only)

Image No.dwg-26495
FERT DROP TUBE ASSEMBLY BOX141-011E1.
SLIDE STOPASSEMBLY141-041E2.
WASHER LOCK 1/4 SS804-033C3.
NUT HEX SS 1/4-20803-004C4.
FERTILIZER LATCH WELDMENT141-116H5.
COVER HANDLE CHAIN142-009D6.
PIN COTTER5/32 X 1 PLT805-019C7.
MF FERTTRAY END PLT WLDMT LH191-006H8.
MF FERTTRAY END PLT WLDMT RH191-007H9.
SPKT 40B30 X 3/4 HEXBORE W/ SS808-086C10.
HHCS 3/8-16X1 GR5802-017C11.
WASHER LOCK SPRING 3/8 PLT804-013C12.
BRG FLG 1.25ID 3BOLT822-083C13.
NUT HEX 3/8-16 PLT803-014C14.
HHCS 3/4-10X8 1/2 GR5802-402C15.
SCREW SET 1/4-28 SH X 1/2 LG801-009C16.
MF FERT.75 HEX BORE BUSHING191-001D17.
FELT SEAL890-026C18.
TRAY BEARING SPACER141-084D19.
SEAL 5/16 X 3/4 DOR-TITE TRAY990-024R20.
RHSNB 1/4-20X3/4 SS802-089C21.
LATCH STRIKE800-032C22.
RIVET SS 1/8 DIA800-012C23.
MF FERTTRAY SLIDE SUPPORT191-019D24.
MF FERTSTARRETAINER SIDE PLT191-018D25.
MF FERTHEX BORE PLASTIC BUSH191-002D26.
6 POINT FERT METERING WHEEL817-053C27.
13' EW FERT BEARING RETAINER175-102H28.
RHSNB 5/16-18X3/4 GR5802-092C29.
WASHER LOCK SPRING 5/16 PLT804-009C30.
NUT HEX 5/16-18 PLT803-008C31.
RHSNB 1/4-20X3/4 SS802-089C32.
WASHER FLAT 1/4 SAE SS804-034C33.
.00 HEX SS 1/4-20 NYLOCK803-003C34.
FERT TRAY LATCH STRIKE142-273D35.
FERT OUTLET COVER PLT142-020D36.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 37 - 118-949P

Table of Contents Part Number Index

Fertilizer Trays, Gates & Shafts

(Applies to 1510HDP, 1525P only)

12511

118-949P - 38 - 01/14/14

Table of Contents Part Number Index

Fertilizer Trays, Gates & Shafts

(Applies to 1510HDP, 1525P only)

Image No.dwg12511
3PT 15'-7.5 FERT TRAY WELDMNT142-542H1.
3PT 15'-8 FERT TRAY WELDMENT142-543H1.
3PT 15'-10 FERT TRAY WELDMENT142-544H1.
3PT FERTSLIDEGATE15'-7.524RW142-554H2.
3PT FERTSLIDE GATE 15'-8 22RW142-555H2.
3PT FERTSLIDE GATE15'-10 18RW142-556H2.
FERT TRAY 3/4 HEX SHFT X88 3/4142-265D3.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 39 - 118-949P

Table of Contents Part Number Index

Fertilizer Tray Adjustment

(Applies to 1510HDP, 1525P only)

10633

118-949P - 40 - 01/14/14

Table of Contents Part Number Index

Fertilizer Tray Adjustment

(Applies to 1510HDP, 1525P only)

Image No.dwg10633
FERTILIZER ADJUSTMENT ROD ASSY150-044S1.
KNOB P.W. ADJUSTMENT817-021C2.
FERTILIZER ADJUSTMENT GAUGE819-034C3.
SCREW RD HD 8-32 X 3/8 BRASS801-001C4.
NUT HEX 8-32 BRASS803-035C5.
WASHER INTERNAL STAR #8 BRASS804-002C6.
WASHER FLAT #8 BRASS804-003C7.
WASHER LOCK SPRING 1/4 PLT804-006C8.
NUT-HEX 1/4-20 PLT803-006C9.
SCREW RD HD 1/4-20 X 5/8801-018C10.
TENSION SPRING RETAINER122-065D11.
SPRING SCREW ADJ TENSION STRHT807-020C12.
WASHER LOCK SPRING 5/16 PLT804-009C13.
NUT HEX 5/16-18 PLT803-008C14.
RHSNB 5/16-18X3/4 GR5802-092C15.
ACME SLOTTED NUT150-051D16.
PIN COTTER7/64 X 1 LONG805-064C17.
FERTILIZER ADJ BRKT WELDMENT191-001H18.

Metering System

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 41 - 118-949P

Table of Contents Part Number Index

Single Gauge Wheel

(Applies to 1510HDP, 1525P only)

23024

118-949P - 42 - 01/14/14

Table of Contents Part Number Index

Single Gauge Wheel

(Applies to 1510HDP, 1525P only)

Image No.dwg23024
AXLE SPACER TUBE120-198D1.
TWO PIN IDLER WELDMENT120-212H2.
HUB 5 BOLT SUB ASSEMBLY120-237S3.
AXLE SPACER TUBE;LONG120-242D4.
SPNDL 2 X 26.56 W/ 1.5-12 THD120-327D5.

GAUGE WHEEL ARM 1525P RH OFFST120-333H6.
15P GAUGE WHEEL CHAIN GAURD120-340D7.
GREASE ZERK STRAIGHT 1/4-28800-001C8.
SCREW SQ HD 5/8-11X3 1/2 GR5801-059C9.
HHCS 1/4-20X5/8 GR5802-078C10.
HHCS 1/2-13X1 GR5802-258C11.
NUT LUG 1/2-20X90DEG PLT13/16803-017C12.
NUT LOCK 1/2-13 PLT803-019C13.
NUT HEX JAM 5/8-11 PLT803-023C14.
NUT HEX SLOTTED 1 1/2-12 PLT803-239C15.
WASHER LOCK SPRING 1/4 PLT804-006C16.
WASHER FLAT 1/4 SAE PLT804-007C17.
WASHER HARD 1 1/2 MILCARB GR8804-182C18.
PIN COTTER1/8 X 3/4805-067C19.
PIN SPIROL 1/2 X 2 3/4805-098C20.
PIN ROLL 5/16 X 2 1/2 PLT805-125C21.
PIN COTTER3/8 X 3 PLT805-148C22.

SEAL 3.375 X 2.0 X.438 CR20125816-012C24.
SEAL DBL LIP 2.5 ID X 3.881 OD816-138C25.
NO. 40 12T IDLER SPKT.817-025C26.
BRG CONE 2.00ID TIM33889822-117C27.
HUB STUD 1/2-20X1 5/8 GR5802-135C28.
TIRE 9.5LX15 ON 6IN 5BOLT RIM109-058K29.
WHEEL 6 X 15 X 5 BOLT814-005C30.
RPBY 814-011C814-026C31.
VALVE STEM TR415X.625X1 1/4 LG816-035C32.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

ShownGAUGE WHEEL ARM 1525P LH OFFST120-332H6.

S/N 10954C+SPKT 40B30 X 2 B W/ 5/16 HOLE173-182D23.
S/N 10953C-SPKT 40B27X2B W/5/16 HOLE808-275C23.

01/14/14 - 43 - 118-949P

Table of Contents Part Number Index

Gauge Wheel LH

(Applies to 1510HDP, 1525P only)

23025

118-949P - 44 - 01/14/14

Table of Contents Part Number Index

Gauge Wheel LH

(Applies to 1510HDP, 1525P only)

Image No.dwg23025
PIN,3/4X3 1/4 USE W/3/16 HOLES120-229D1.
HUB 5 BOLT SUB ASSEMBLY120-237S2.

SPACER TUBE 1 ID X 4 11/16120-265D4.

SPACER TUBE 1 ID X 1.03120-278D6.
ACREMETER HEX SHAFT ADAPTOR120-287D7.

SENSOR DISC,42T 5.3 DIA PLTD120-309D9.
SPACER TUBE 1 ID X 2.25120-310D10.
SPACER TUBE 1 ID X 1.25120-315D11.
SHAFT 7/8 HEX GW PIVOTLONG120-316D12.
HHCS 5/8-11X2 GR5802-055C13.
HHCS 1/2-13X1 3/4 GR5802-082C14.
NUT HEX 1/2-13 PLT803-020C15.
NUT HEX NYLOCK 5/8-11 PLT803-148C16.
WASHER LOCK SPRING 1/2 PLT804-015C17.
WASHER FLAT 3/4 USS PLT804-024C18.
WASHER MACH 1.50 X 1.00 X 18GA804-061C19.
PIN COTTER5/32 X 1 1/4 LG805-045C20.
PIN COTTER3/32 X 1 LONG805-063C21.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C22.
PIN CLEVIS 1/4X1 31/64 USBL805-296C23.
SPKT 40C15 X 7/8 HEX BORE808-147C24.

SPKT 40C27 X 7/8 HEX BORE808-154C25.

SPKT 40C24 X 7/8 HEX BORE808-151C25.

15P ACREMETER891-083C27.
15P HECTARE METER891-084C27.
SNAP RING INT. 2.05 OD800-038C28.
BEARING .880 HEX BORE 205DD188-006V29.
3 BOLT PIVOT CAST W/BRG SEAT120-188D30.
FLANGETTE 52 MST822-032C31.
SENSOR U-MOUNT BRACKET120-311D32.
WASHER FLAT 5/16 SAE PLT804-036C33.
HHCS 5/16-18X5/8802-705C34.
BRG 7/8HEXX2.05OD SPH822-119C35.
NUT LOCK 5/16-18 PLT803-011C36.
ADJUSTMENT TUBE EYE BOLT120-213H37.
ADJUSTMENT TUBE WLDMT120-214H38.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C39.
UPPER GAUGE WHEEL CLEVIS120-001E40.
GAUGE WHEEL ARM 1525P LH OFFST120-332H41.
1525P GAUGE WHEEL MOUNT WELDMT120-336H42.
1525P LH MARKER MOUNT113-797H43.
U-BOLT 1/2-13 X 3 1/32 X 6806-122C44.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2806-053C45.
WASHER LOCK SPRING 1/2 PLT804-015C46.
NUT HEX 1/2-13 PLT803-020C47.
WASHER FLAT 5/8 SAE PLT804-021C48.
WASHER LOCK SPRING 5/8 PLT804-022C49.
NUT HEX 5/8-11 PLT803-021C50.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 37-403PT GW LINK ASSEMBLY120-245S3.

Includes items 28-303 BOLT PIVOT BEARING ASSY120-269S5.

Includes items 31-36SENSOR U-MOUNT BRACKET SUBASSY120-291S8.

Range Sprocketsee "Gauge Wheel

Transmission"

(S/N 10954C+) Range Sprocket see

"Gauge Wheel Transmission"

(S/N 10953C-) Range Sprocket see

"Gauge Wheel Transmission"
(S/N 10954C+)CHAIN RL #40 112 PITCHES136-136D26.
(S/N 10953C-)CHAIN RL #40 108 PITCHES136-150D26.

01/14/14 - 45 - 118-949P

Table of Contents Part Number Index

Gauge Wheel RH

(Applies to 1510HDP, 1525P only)

23026

118-949P - 46 - 01/14/14

Table of Contents Part Number Index

Gauge Wheel RH

(Applies to 1510HDP, 1525P only)

Image No.dwg23026
PIN,3/4X3 1/4 USE W/3/16 HOLES120-229D1.
GAUGE WHEEL ARM 1525P RH OFFST120-333H2.

SPACER TUBE 1 ID X 1 3/16120-264D4.
SPACER TUBE 1 ID X 4 11/16120-265D5.

SPACER TUBE 1 ID X 3.94120-284D7.
ACREMETER HEX SHAFT ADAPTOR120-287D8.
SPACER TUBE 1 ID X 1.25120-315D9.
SHAFT 7/8 HEX GW PIVOTLONG120-316D10.
HHCS 5/8-11X2 GR5802-055C11.
HHCS 5/16-18X1 SS802-087C12.
NUT HEX 1/2-13 PLT803-020C13.
NUT HEX NYLOCK 5/8-11 PLT803-148C14.
WASHER LOCK SPRING 1/2 PLT804-015C15.
WASHER FLAT 3/4 USS PLT804-024C16.
WASHER MACH 1.50 X 1.00 X 18GA804-061C17.
PIN COTTER5/32 X 1 1/4 LG805-045C18.
PIN COTTER3/32 X 1 LONG805-063C19.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C20.
PIN CLEVIS 1/4X1 31/64 USBL805-296C21.
SPKT 40C15 X 7/8 HEX BORE808-147C22.

SPKT 40C27 X 7/8 HEX BORE808-154C23.

SPKT 40C24 X 7/8 HEX BORE808-151C23.

1525P GAUGE WHEEL MOUNT WELDMT120-336H24.
SNAP RING INT. 2.05 OD800-038C25.
BEARING .880 HEX BORE 205DD188-006V26.
3 BOLT PIVOT CAST W/BRG SEAT120-188D27.
ADJUSTMENT TUBE EYE BOLT120-213H28.
ADJUSTMENT TUBE WLDMT120-214H29.
NUT HEX JAM 1 1/4-7 LH THD PLT803-046C30.
UPPER GAUGE WHEEL CLEVIS120-001E31.

1525P RH MARKER MOUNT113-798H33.
U-BOLT 1/2-13 X 3 1/32 X 6806-122C34.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2806-053C35.
WASHER LOCK SPRING 1/2 PLT804-015C36.
NUT HEX 1/2-13 PLT803-020C37.
WASHER FLAT 5/8 SAE PLT804-021C38.
WASHER LOCK SPRING 5/8 PLT804-022C39.
NUT HEX 5/8-11 PLT803-021C40.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 28-313PT GW LINK ASSEMBLY120-245S3.

Includes items 25-273 BOLT PIVOT BEARING ASSY120-269S6.

Range Sprocketsee "Gauge Wheel

Transmission"
(S/N 10954C+) Range Sprocket see

"Gauge Wheel Transmission"
(S/N 10953C-) Range Sprocket see

"Gauge Wheel Transmission"

(S/N 10954C+)CHAIN RL #40 112 PITCHES136-136D32.
(S/N 10953C-)CHAIN RL #40 108 PITCHES136-150D32.

01/14/14 - 47 - 118-949P

Table of Contents Part Number Index

Gauge Wheel Transmission

(Applies to 1510HDP, 1525P only)

23027

118-949P - 48 - 01/14/14

Table of Contents Part Number Index

Gauge Wheel Transmission

(Applies to 1510HDP, 1525P only)

Image No.dwg23027
SHAFT 7/8 HEX GW UPPER REAR120-285D1.
SPKT 40C15 7/8 HEX W/ SS HOLES120-290D2.
TUBE RND DOM. 1 OD X 7/32WX3.0120-293D3.
TUBE RND 1 OD X 7/32W X 3.31120-313D4.
SPACER TUBE 1 ID X 1.25120-315D5.
1525P GAUGE WHEEL MOUNT WELDMT120-336H6.
GW UPPER FRNT 7/8 HEX SHFT 15P120-341D7.

IDLER BOLT PLATE402-242D10.
SCREW SET 5/16-18 SKT KP X 3/8801-035C11.
RHSNB 5/16-18X1 1/4 GR5802-009C12.
HHCS 1/2-13X4 3/4 GR5802-201C13.
RHSNB 3/8-16X1 3/4 GR5802-252C14.
HHCS 1/2-13X4 1/2 GR5 SPTHD802-672C15.
NUT HEX JAM 1/2-13 PLT803-036C16.
803-184 FLG TP LK 5/16-18ZNYCR803-177C17.
NUT FLANGE LOCK 3/8-16 PLT803-209C18.
WASHER LOCK SPRING 1/2 PLT804-015C19.
WASHER MACH 1.50 X 1.00 X 18GA804-061C20.
WASHER FLAT 1/2 USS HARD PLT804-113C21.
PIN ROLL 1/4 X 1 1/2 LG PLT805-180C22.
PIN LINCH 3/16 X 1 9/16 LONG805-240C23.
SPKT 40C17 X 7/8 HEX BORE808-148C24.
SPKT 40C19 X 7/8 HEX BORE808-149C25.
SPKT 40C23 X 7/8 HEX BORE808-150C26.
SPKT 40C24 X 7/8 HEX BORE808-151C27.
SPKT 40C25 X 7/8 HEX BORE808-152C28.
SPKT 40C26 X 7/8 HEX BORE808-153C29.
SPKT 40C27 X 7/8 HEX BORE808-154C30.
SPKT 40C28 X 7/8 HEX BORE808-155C31.

IDLER 1 PC 2.38X1.01X1.062817-406C34.
BRG 7/8HEXX2.05OD SPH822-119C35.
FLANGETTE 52 3-BOLT PLT822-175C36.
CHAIN RL #40 X 74 PITCHES136-140D37.
CHAIN RL #40 112 PITCHES136-136D38.
CHAIN RL #40 108 PITCHES136-150D39.
U-BOLT 3/4-10 X 7 1/32 X 7 3/4806-121C40.
WASHER LOCK SPRING 3/4 PLT804-023C41.
NUT HEX 3/4-10 PLT803-027C42.
PIN COTTER7/64 X 1 LONG805-064C43.
WASHER FLAT 1/2 USS PLT804-017C44.
TUBE RND 1 OD X 7/32W X 1.56120-305D45.
OFFSET DOUBLE IDLER WELDMENT402-126H46.
SHAFT 7/8 HEX, 88.0 LONG PLTD120-291D47.

COLLAR LOCK 7/8 HEX402-058D49.
SCREW SET 5/16-18 SKT KP X 3/8801-035C50.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

Range SprocketSPKT 40C60 X 7/8 HEX BORE195-172H8.
Includes items 33, 43-46DOUBLE SPOOL IDLER ASSY402-140S9.

Range SprocketSPKT 40C30 X 7/8 HEX BORE808-156C32.
Range SprocketSPKT 40C20 X 7/8 HEX BORE808-276C33.

Used on 10", 15", TR30", TR30 with

splitter
Used on 10", 15", TR30 with splitterSHAFT 7/8 HEX, 98.0 LONG PLTD120-343D47.
Includes items 49, 50LOCK COLLAR, 7/8 HEX W/ SET SC402-025S48.

01/14/14 - 49 - 118-949P

Table of Contents Part Number Index

Fertilizer Drive

(Applies to 1510HDP, 1525P only)

26473

118-949P - 50 - 01/14/14

Table of Contents Part Number Index

Fertilizer Drive

(Applies to 1510HDP, 1525P only)

Image No.dwg-26473
DOUBLE SPOOL IDLER ASSY402-140S1.
PIN ROLL 3/16X1 1/4 PLT805-023C2.
CHAIN RL #40 218 PITCHES W/CON136-188D3.
NUT NYLOCK JAM NUT 1/2-13803-178C4.
NUT HEX JAM 1/2-13 PLT803-036C5.
NO. 40 12T IDLER SPKT.817-025C6.
IDLER BOLT PLATE402-242D7.
RHSNB 3/8-16X1 1/2 GR5802-453C8.
MB IDLER SPACER116-240D9.
SPROCKET 40A17 IDLER808-046C10.
HHCS 5/8-11X2 3/4 GR5802-281C11.
HHCS 1/2-13X4 3/4 GR5802-201C12.
WASHER FLAT 1/2 USS PLT804-017C13.
IDLER 1 PC 2.38X1.01X1.062817-406C14.
TUBE RND 1 OD X 7/32W X 3.31120-313D15.
SPKT 40C12 X 7/8 HEX BORE808-219C16.
NUT HEX 5/16-18 PLT803-008C17.
WASHER LOCK SPRING 5/16 PLT804-009C18.
FLANGETTE 52 MST822-032C19.
BRG 7/8HEXX2.05OD SPH822-119C20.
SHAFT HEX 7/8 X 18 1/4120-226D21.
3PT-P SML SDS JK SFT MOUNT LH133-058D22.
RHSNB 5/16-18X1 GR5802-282C23.
SPKT 40B29 X 7/8 HEX BORE & SS808-168C24.
REAR DRIVE BRG MOUNT PLATE LH123-517D25.
PIN COTTER7/64 X 1 LONG805-064C26.
CHAIN RL #40 96 PITCHES136-152D27.
RND SHAFT 3/4 X 13 3/8 W/KW120-234D28.
BRG FLG .75ID 2BOLT822-126C29.
SPKT 40B17 X 3/4BORE W/KW&SS808-170C30.
3/16 X 1 KEY168-127D31.
NUT HEX 1/2-13 PLT803-020C32.
WASHER LOCK SPRING 1/2 PLT804-015C33.
SPKT 40B30 X 3/4 HEXBORE W/ SS808-086C34.
CHAIN RL #40 55 PITCHES136-153D35.
WASHER FLAT 1/2 SAE PLT804-016C36.
TUBE RND 1 OD X 7/32W X 1.56120-305D37.
SPKT 40B12 X 3/4 B W/KW&SS808-040C38.
HHCS 1/2-13X1 1/2 GR5802-091C39.
NUT FLANGE LOCK 3/8-16 PLT803-209C40.
WASHER LOCK SPRING 3/8 PLT804-013C41.
NUT HEX 3/8-16 PLT803-014C42.
NUT HEX 5/8-11 PLT803-021C43.
WASHER LOCK SPRING 5/8 PLT804-022C44.
U-BOLT 3/8-16 X 5 1/32 X 4 1/4806-165C45.
OFFSET DOUBLE IDLER WELDMENT402-126H46.

Drive

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 51 - 118-949P

Table of Contents Part Number Index

25 Series Opener Arms & Mounts

(Applies to 1510HDP, 1525P only)

22698

118-949P - 52 - 01/14/14

Table of Contents Part Number Index

25 Series Opener Arms & Mounts

(Applies to 1510HDP, 1525P only)

Image No.dwg22698
25 SERIES OPENER SHANK WELDMT298-509H1.
HHCS 3/8-16X2 1/2 GR5802-114C2.
HFS 1/2-13X6 1/8GR5 PLT802-745C3.
IDLER SPOOL 1.44OD X.53B X1.5L817-480C4.
IDLER SPACER TUBE 1/2OD X 1.56198-257D5.
NUT FLANGE LOCK 3/8-16 PLT803-209C6.
25P CENTER MIDDLE OPENER MOUNT298-626H7.

NUT HEX FLG. LOCK 1/2-13 PLT.803-169C8.
25P UPPER SPRING LINK198-292D9.

SPRING EXT 1.575O.D.X.225 WIRE807-076C11.
25P LOWERSPRING LINK198-293D12.
25P REAR OPENER INNER PIVOTTB198-295D13.

HHCS 3/8-16X1 GR5802-017C16.
RPBY 298-883S298-514H17.

U-BOLT 5/8-11 X 7 1/32 X 6 1/2806-053C18.
NUT HEX 5/8-11 PLT803-021C19.
DRIVE MOUNT WELDMENT403-113H20.
DRIVE PLATE LINE-UP PIN403-107D21.

RHSNB 3/8-16X1 GR5802-015C23.
HHCS 3/8-16X2 1/4 GR5802-382C24.
NUT HEX 3/8-16 PLT803-014C25.
WASHER LOCK SPRING 3/8 PLT804-013C26.
HHCS 3/8-16X1 GR5802-017C27.
SPRING COMP DIE.75X.375X1LX515807-232C28.
SCR HX SKT BUT CP 3/8-16X3/4801-078C29.
9/16 OD DRIVE PLATE SPACER TB403-182D30.
PRESS WHEEL ARM PIVOT BUSHING817-083C31.
IDLER BRACKETWELDMENT403-115H32.
IDLER PIVOT 2.06 LONG891-191C33.
IDLER 1 PC 2.38X1.01X1.062817-406C34.
SNAP RING EXT 1 HEAVY800-085C35.
WASHER FLAT 3/8 SAE PLT804-012C36.
WASHER GRASS SEEDER CUP SHAFT804-042C37.
METER ALIGNMENT BUSHING403-108D38.
METER RETAINER LATCH PLATE403-112D39.
METER RETAINER PLATE403-111D40.
SPRING EXT. 1.0ODX5.OLX.095MW807-236C41.
25P MIDDLE OPENER MOUNT W/BUSH298-888S42.

25P REAR OPENER MOUNT W/BUSH298-887S43.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Used on centerofmachine on10",15"

and twin row splitter

S/N 11485C-25 SERIES UPPER PARALLEL ARM298-513H10.
S/N 11486C+25 SERIES UPPER PARALLEL ARM288-374H10.

S/N 11485C-25 SERIES LOWER PARALLEL ARM298-510H14.
S/N 11486C+25 SRS LOWER PARALLEL ARM403-667D14.
2008-SPKT 41B12 7/8 HEX W/BEARING403-059D15.
2009+PEER 7/8 HEX BRG AND MNT822-239C15.

Used on front stagger on 9 1/2", 10",

twin row & twin row splitters 1st

Revision
2nd Revision25P FRONT OPENER MOUNT W/BUSH298-883S17.

Includes 46 - 52DRIVE BEARING ASSEMBLY403-117S22.

Used on front stagger rows on 15" &

20" spacing alsoused on all30" rows

on 30" only spacing. Used on twin

row splitter openers 1st Revision
Used on rear stagger rows on 9 1/2",

10", 15", 20", twin row & twin row

splitters 2nd Revision
Front rowCHAIN RL #41 90 PITCHES136-214D44.
Middle row 7" staggerCHAIN RL #41 116 PITCHES136-215D44.

01/14/14 - 53 - 118-949P

Table of Contents Part Number Index

25 Series Opener Arms & Mounts (continued)

(Applies to 1510HDP, 1525P only)

Rear row 14" staggerCHAIN RL #41 144 PITCHES136-216D44.
WASHER LOCK SPRING 5/8 PLT804-022C45.
DRIVE JAW403-104D46.
19T SPROCKET HUB ASSY403-112H47.
DRIVE BEARING HOUSING403-116H48.
SNAP RING EXT 45MM800-365C49.
PIN ROLL 3/16 X 2 1/2 LG. PTL.805-062C50.
SPRING COMP .970ODX.063WX1.25807-174C51.
BRG BALL 45IDX7ODX16W822-210C52.
PIN HITCH 1 X 6 W/HAIRPIN805-033C53.

25P UP FLOATLIMITER122-173D54.
HHCS 3/8-16X1 1/4 GR5802-079C55.
PARALLEL ARM PIVOT BUSHING817-084C56.

HHCS 5/8-18X1 GR5802-209C58.

(Optional Only) use to lockup front

rows

2009+SPKT 41C12 W/SS SPCL PLT808-395C57.

RevisionCommentsPart DescriptionPart No.Ref.

118-949P - 54 - 01/14/14

Table of Contents Part Number Index

25 Series Opener Arms & Mounts (continued)

(Applies to 1510HDP, 1525P only)

This Page Intentionally Left Blank

Openers

01/14/14 - 55 - 118-949P

Table of Contents Part Number Index

25 Series Opener Body

(Applies to 1510HDP, 1525P only)

22697

118-949P - 56 - 01/14/14

Table of Contents Part Number Index

25 Series Opener Body

(Applies to 1510HDP, 1525P only)

Image No.dwg22697
SCRAPER, DISC LH404-153D1.
NUT HEX WHIZ 5/16-18 PLT803-043C2.
RHSNB 5/16-18X3/4 GR5802-092C3.
1/2-13X 1 3/4 SQ HD SS G5 PLTD801-164C4.
25P SEED TUBE W/DJ HR SENSOR817-604C5.
SEED TUBE FPU TB,CLIP & SENSOR403-214S5.
25P SCRAPER SEPARATOR WLDMT404-170H6.
PIN ROLL 5/16 X 5/8 PLT805-335C7.
PIN ROLL 5/16 X 7/8805-250C8.
WALKBEAM404-077D9.
SHIELD,DISK404-139D10.
WALKBEAM PIVOT PIN404-079D11.

25P SIDE DEPTH WHL ARM SPINDLE198-288D12.

25P SIDE DEPTH WHEEL ARM198-289D13.

GREASE ZERK STRAIGHT 1/4-28800-001C14.
HHCS 1/2-13X3 GR5802-039C15.
WASHER LOCK SPRING 1/2 PLT804-015C16.
NUT HEX 1/2-13 PLT803-020C17.
U CUP SEAL816-686C18.
OUTER BUSHING INNER CUP SEAL I198-360D19.

25P DEPTH WHL ECCENTRIC BUSHNG198-290D20.

HFS 1/2-13 X 1 1/2 GR8 NYL PLT802-663C22.

2.5X16 SIDE DEPTH WHEEL ASSY814-257C23.

3X16 SIDE DEPTH WHEEL ASSY814-260C23.

4 X 16 GAUGE TIRE ASSY-PLASTIC814-173C23.

HHCS 5/8-11X3 1/4 GR5802-160C24.

WASHER MACH 1.19 X .63 X 18GA804-040C25.
WASHER LOCK SPRING 5/8 PLT804-022C26.
WASHER FLAT 1.31ODX.65IDX.188T804-195C27.
WALKBEAM MOUNT404-078D28.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C29.
DD BRG FLANGE DUST COVER107-111D30.

HHCS 1/2-13X1 GR5802-258C32.
SEED TUBE WITHOUT SENSOR HOLE817-606C33.
25P SEED TUBE W/HR SENSOR HOLE817-605C33.
SEED TUBE 25S FPU TB&CAP W/ HL817-715C33.
HHCS 1/2-13X1 1/2 GR5802-091C34.
1X12 PW ADJUSTER405-032D35.
RPBY 199-146A199-108H36.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Used on wide row 20" & 30" openersSPINDLE, GA WHL MNT ADJ404-119D12.
(Shown)Used on narrowrow,twinrow

& split row openers & 15"

(Shown)Used on narrowrow,twinrow

& split row openers & 15"

Used on wide row 20" & 30" openersARM, GAUGE WHEEL404-155D13.

(Shown)Used on narrowrow,twinrow

& split row openers & 15"
Used on wide row 20" & 30" openers25P O-RING BUSHING404-214D19.
(Shown)Used on narrowrow,twinrow

& split row openers & 15"
Used on wide row 20" & 30" openersECCENTRIC BUSHING404-174D20.
Use with keeton seed firmerHHCS 5/16-18X2 1/2 GR5802-172C21.
Use with seed-lok or No seed firmerRHSNB 5/16-18X3/4 GR5802-092C21.

Referto "Side DepthWheelAssembly"

for breakdown
Referto "Side DepthWheelAssembly"

for breakdown
Referto "Side DepthWheelAssembly"

for breakdown
Used on narrow row, twin row & split

row openers & 15"
Used on wide row 20" & 30" openersHHCS 5/8-11 X 3 GR8802-646C24.

Includes items 50 - 534.0 MM 15 DISC W/ 5/8 ASSY404-121S31.

(S/N 11485C-) Used on short (front)

row stagger on twin rows. & 15"

01/14/14 - 57 - 118-949P

Table of Contents Part Number Index

25 Series Opener Body (continued)

(Applies to 1510HDP, 1525P only)

LONG PW MOUNT199-140H36.

SNAP RING EXT 5/8 .050 T800-118C37.
20 SER OPNR CAM PIN198-202D38.
PLANTER HANDLE404-020D39.
SPRING COMP .72 X 1.5 X .072WD807-119C40.
WASHER 3/4 X 17/32 X 18 GA PLT804-100C41.
PIN COTTER3/32 X 1 LONG805-063C42.
ADJUSTMENT ASSY404-014S43.

PIN ROLL 1/4 X 1 1/2 LG PLT805-180C44.
PIN ROLL 5/32 X 1 1/2 PLT805-290C45.
SCRAPER, DISC RH404-152D46.
CABLE TIE .19X7.25 1.75D 50LB800-112C47.
PIN CLEVIS 1/4 X 2 1/2 PLT805-278C48.
PIN COTTER3/32 X 1 LONG805-063C49.
HSG RIBB FLG 6BOLTPLT890-466C50.
RIVET,BUTTON HEAD 1/4 X 1/2800-213C51.

4.0 MM 15 DISK (21 DEG BEVEL)820-287C52.
BEARING AA205DD188-001V53.
25P ECCENTRIC HEX ADJUSTER812-327C54.
RPBY 199-147A199-109H55.

25P MID PW MOUNT199-141H55.

DJ PLANTER STYLE SEED SENSOR833-222C56.

25P WIDE ELIMINATOR BUSHNG ASY298-881S61.
25P NARROW ELIMINATOR BUSH ASY298-882S61.
SEED TUBE 25S HOOK CLIP198-331D62.

RevisionCommentsPart DescriptionPart No.Ref.

(S/N 11486C+) Used on short (front)

row stagger on twin rows. & 15"

Includes items 9, 11, 28, 39 - 42, 44

& 45

(S/N11485C-) Usedonrear (long) row

stagger rows on 15" & twin row &
middle row stagger on twin row
splitter openers

(S/N 11486C+) Used on rear (long)

row stagger rows on 15" & twin row
& middle row stagger on twin row
splitter openers

Includes items 817-605C & #5625P SEED TUBE W/DJ HR SENSOR817-604C57.
Used with seed lok or No Firmer25 SERIES SEED FLAP CLIP404-189D58.
Used with No FirmerSEED FLAP, UHMW, LONG817-349C59.
Used with seed lokSEED FLAP, RUBBER, SEED-LOK816-302C60.

118-949P - 58 - 01/14/14

Table of Contents Part Number Index

25 Series Opener Body (continued)

(Applies to 1510HDP, 1525P only)

This Page Intentionally Left Blank

Openers

01/14/14 - 59 - 118-949P

Table of Contents Part Number Index

HD10 Series Opener Arms & Mounts

(Applies to 1510HDP, 1525P only)

28449

118-949P - 60 - 01/14/14

Table of Contents Part Number Index

HD10 Series Opener Arms & Mounts

(Applies to 1510HDP, 1525P only)

Image No.dwg28449
HD10P OPENER WELDMENT298-855H1.
HHCS 3/8-16X2 1/2 GR5802-114C2.
HFS 1/2-13X6 1/8GR5 PLT802-745C3.
IDLER SPOOL 1.44OD X.53B X1.5L817-480C4.
IDLER SPACER TUBE 1/2OD X 1.56198-257D5.
NUT FLANGE LOCK 3/8-16 PLT803-209C6.
PARALLEL ARM PIVOT BUSHING817-084C7.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C8.

25 SERIES UPPER PARALLEL ARM298-513H10.
SPRING EXT 1.575 OD X .225 W807-076C11.

25P REAR OPENER INNER PIVOTTB198-295D13.
25 SERIES LOWER PARALLEL ARM298-510H14.

HHCS 3/8-16X1 GR5802-017C16.
25P FRONT OPENER MOUNT WELDMT298-884H17.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2806-053C18.
NUT HEX 5/8-11 PLT803-021C19.
DRIVE MOUNT WELDMENT403-113H20.
DRIVE PLATE LINE-UP PIN403-107D21.
DRIVE BEARING ASSEMBLY403-117S22.
RHSNB 3/8-16X1 GR5802-015C23.
HHCS 3/8-16X2 1/4 GR5802-382C24.
NUT HEX 3/8-16 PLT803-014C25.
WASHER LOCK SPRING 3/8 PLT804-013C26.
HHCS 3/8-16X1 GR5802-017C27.
SPRING COMP DIE.75X.375X1LX515807-232C28.
SCR HX SKT BUT CP 3/8-16X3/4801-078C29.
9/16 OD DRIVE PLATE SPACER TB403-182D30.
PRESS WHEEL ARM PIVOT BUSHING817-083C31.
IDLER BRACKETWELDMENT403-115H32.
IDLER PIVOT 2.06 LONG891-191C33.
IDLER 1 PC 2.38X1.01X1.062817-406C34.
SNAP RING EXT 1 HEAVY800-085C35.
WASHER FLAT 3/8 SAE PLT804-012C36.
WASHER GRASS SEEDER CUP SHAFT804-042C37.
METER ALIGNMENT BUSHING403-108D38.
METER RETAINER LATCH PLATE403-112D39.
METER RETAINER PLATE403-111D40.
SPRING EXT. 1.0ODX5.OLX.095MW807-236C41.
HD10P REAR OPENER MOUNT WELDMT298-856H42.
CHAIN RL #41 90 PITCHES136-214D43.
CHAIN RL #41 132 PITCHES136-206D43.
WASHER LOCK SPRING 5/8 PLT804-022C44.
DRIVE JAW403-104D45.
19T SPROCKET HUB ASSY403-112H46.
DRIVE BEARING HOUSING403-116H47.
SNAP RING EXT 45MM800-365C48.
PIN ROLL 3/16 X 2 1/2 LG. PTL.805-062C49.
SPRING COMP .970ODX.063WX1.25807-174C50.
BRG 45MM ID 75MM OD 16MM822-210C51.
LOCKUP PIN FOR 10HD OPENER398-456H52.
25P UP FLOATLIMITER122-173D53.
HHCS 3/8-16X1 1/4 GR5802-079C54.
PIN LINCH 3/16 X 1 9/16 LONG805-240C55.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Used with dual springs25P UPPER SPRING LINK198-292D9.

Used with dual springs25P LOWERSPRING LINK198-293D12.

2008-SPKT 41B12 7/8 HEX W/BEARING403-059D15.
2009+PEER 7/8 HEX BRG AND MNT822-239C15.

01/14/14 - 61 - 118-949P

Table of Contents Part Number Index

HD10 Series Opener Arms & Mounts (continued)

(Applies to 1510HDP, 1525P only)

2009+SPKT 41C12 W/SS SPCL PLT808-395C56.
Used with single springs3 13/32 SPRING STRAP198-240D57.

RevisionCommentsPart DescriptionPart No.Ref.

118-949P - 62 - 01/14/14

Table of Contents Part Number Index

HD10 Series Opener Arms & Mounts (continued)

(Applies to 1510HDP, 1525P only)

This Page Intentionally Left Blank

Openers

01/14/14 - 63 - 118-949P

Table of Contents Part Number Index

HD10 Series Opener Body

(Applies to 1510HDP, 1525P only)

23345

118-949P - 64 - 01/14/14

Table of Contents Part Number Index

HD10 Series Opener Body

(Applies to 1510HDP, 1525P only)

Image No.dwg23345
HD10P OPENER WELDMENT298-855H1.
CABLE TIE .19X7.25 1.75D 50LB800-112C2.
PIN COTTER3/32 X 1 LONG805-063C3.
T-HANDLE ASSEMBLY817-328C4.
PIN ROLL 5/32 X 5/8 PLT805-186C5.
SPRING .540 O.D.X 1 1/4 X.054W807-106C6.
OPENER TRUNION817-347C7.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C8.

PIN ROLL 5/16 X 7/8805-250C10.
PIN ROLL 5/16 X 5/8 PLT805-335C11.
25P SCRAPER SEPARATOR WLDMT404-170H12.
RHSNB 5/16-18X3/4 GR5802-092C13.
NUT HEX WHIZ 5/16-18 PLT803-043C14.

WASHER MACH 1.19 X .63 X 18GA804-040C16.
BEARING AA205DD188-001V17.

4.0 MM 15 DISK (21 DEG BEVEL)820-287C18.
RIBB BRG FLNG .266 MT HOLE PLT890-466C19.
RIVET,BUTTON HEAD 1/4 X 1/2800-213C20.

DD BRG FLANGE DUST COVER107-111D22.
HHCS 5/8-11X1 1/2 GR5 NYL802-228C23.
PIN CLEVIS 1/4 X 2 1/2 PLT805-278C24.
RHSNB 1/2-13X1 GR5802-183C25.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C26.

DJ PLANTER STYLE SEED SENSOR833-222C28.
SEED TUBE 25S FPU TB&CAP W/ HL817-715C29.
SEED TUBE 25S HOOK CLIP198-331D30.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 28-30SEED TUBE FPU TB,CLIP & SENSOR403-214S9.

Used without Unit Mount CoulterTRASH GUARD WELDMENT288-310H15.

Includes 17-204.0 MM 15 DISC W/ 5/8 ASSY404-121S21.

Used with Unit Mount CoulterSHIELD,DISK404-139D27.

01/14/14 - 65 - 118-949P

Table of Contents Part Number Index

HD10 Fertilizer hose Retainer

(Applies to 1510HDP, 1525P only)

26474

118-949P - 66 - 01/14/14

Table of Contents Part Number Index

HD10 Fertilizer hose Retainer

(Applies to 1510HDP, 1525P only)

Image No.dwg_26474
PLASTIC FERTILIZERTUBE817-346C1.
SCREW HEX SLT10-16X1/2P.THD CT801-002C2.
CLAMP HOSE 1 1/2 NO. 24800-008C3.
SEED HOSE X 59 RIBS 1.5-1.25816-007C4.
UPPER FERTHOSE CLAMP800-016C5.
SML SDS TB REINFORCEMENT RING133-065D6.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 67 - 118-949P

Table of Contents Part Number Index

Side Depth Wheel Assembly

(Applies to 1510HDP, 1525P only)

21993

118-949P - 68 - 01/14/14

Table of Contents Part Number Index

Side Depth Wheel Assembly

(Applies to 1510HDP, 1525P only)

Image No.dwg21993

803-184 FLG TP LK 5/16-18ZNYCR803-177C4.
4 X 16 GAUGE WHEEL RIM814-175C5.
4 1/2 X 16 GAUGE TIRE814-113C6.
BRG .63ID PRESS WHL ASY822-170C7.
4 X 16 GAUGE WHEEL RIM HALF817-331C8.
HFSS 5/16-18X1 3/4 GR5802-094C9.
HFSS 5/16-18X1 GR5 PLT802-431C10.
RHSNB 5/16-18X3/4 GR5802-092C11.
HFS 5/16-18X3/4 GR5802-387C12.

2.25X16'" TIRE FOR 814-257C814-258C13.

2.25X16'" RIM HALF FOR 814-257C814-259C14.
3X 16'" TIRE FOR 814-260C814-261C15.
3X16 NYLON WHEEL HALF-40MM817-541C16.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Includes items 4-104 X 16 GAUGE TIRE ASSY-PLASTIC814-173C1.
Includes items 4-5, 7, 11-142.5X16 SIDE DEPTH WHEEL ASSY814-257C2.
Includes items 4-5, 7, 10, 163X16 SIDE DEPTH WHEEL ASSY814-260C3.

01/14/14 - 69 - 118-949P

Table of Contents Part Number Index

25 Series Side Depth Wheel Scraper Assembly

(Applies to 1510HDP, 1525P only)

31830

118-949P - 70 - 01/14/14

Table of Contents Part Number Index

25 Series Side Depth Wheel Scraper Assembly

(Applies to 1510HDP, 1525P only)

Image No.dwg31830
HHCS 1/2-13X3 1/4 GR5802-099C1.

Shown2.5" GAUGE WHEEL SCRAPER404-194D2.

4" GAUGE WHEEL SCRAPER404-196D2.
3" GAUGE WHEEL SCRAPER404-195D2.
WASHER FLAT 1/2 SAE PLT804-016C3.
NUT HEX 1/2-13 PLT803-020C4.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 71 - 118-949P

Table of Contents Part Number Index

25 Series Seed-Lok

(Applies to 1510HDP, 1525P only)

17663

118-949P - 72 - 01/14/14

Table of Contents Part Number Index

25 Series Seed-Lok

(Applies to 1510HDP, 1525P only)

Image No.dwg17663
PIN COTTER5/32 X 1 1/4 LG805-045C1.
LEVER, SEED LOK404-213D2.
SPRING .540 O.D.X 1 1/4 X.054W807-106C3.
LOCK ROD WELD404-088H4.
SEED LOK MOUNT404-144D5.
RHSNB 5/16-18X3/4 GR5802-092C6.
NUT HEX WHIZ 5/16-18 PLT803-043C7.
JD KINZE SEED LOK LOWER MOUNT206-010D8.
SNAP RING 1/2 EXTERNAL HEAVY800-166C9.
SEED LOK WHEEL ARM404-061D10.
SCR HX SKT BUT CP 3/8-16X3/4801-078C11.
WASHER INTERNAL STAR 3/8 PLT.804-078C12.
BRG 203 SEED-LOK WITH PIN118-008V13.
SCR PH THD FMG #10X1/2 TP ZP801-084C14.
RETAINER W/BONDED SEAL 4BLT816-173C15.
5/8 X 6 SEED LOK WHEEL817-191C16.
6 SEED LOK ASSEMBLY206-014S17.
WASHER 1.5 X .51 X .187804-112C18.
SPRING EXT 1 X 4 X .135 WD807-125C19.
SEED LOK PIVOT PIN206-011D20.
LEVER STOP404-212D21.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 73 - 118-949P

Table of Contents Part Number Index

HD10 & 25 Series Keeton Seed Firmer (Option)

(Applies to 1510HDP, 1525P only)

21855

118-949P - 74 - 01/14/14

Table of Contents Part Number Index

HD10 & 25 Series Keeton Seed Firmer (Option)

(Applies to 1510HDP, 1525P only)

Image No.dwg21855
KEETON NARROW TAIL1208251.
BRACKET FOR 890-840C REV A&B129BXT8222.
RHSNB 3/8-16X1 3/4 GR5802-252C3.
NUT HEX 3/8-16 PLT803-014C4.
WASHER LOCK SPRING 3/8 PLT804-013C5.
NUT HEX WHIZ 5/16-18 PLT803-043C6.
HHCS 5/16-18X2 1/2 GR5802-172C7.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 75 - 118-949P

Table of Contents Part Number Index

Coulter Blade Arm Weldment

(Applies to 1510HDP, 1525P only)

22774

118-949P - 76 - 01/14/14

Table of Contents Part Number Index

Coulter Blade Arm Weldment

(Applies to 1510HDP, 1525P only)

Image No.dwg22774
GP25S NARROW HUB ASM204-084S1.

UNIT MOUNTED COULTER MOUNT204-139H2.
HHCS 5/8-11X4 GR5802-060C3.
RHSNB 1/2-13X1 1/2 GR5802-106C4.
NUT HEX 1/2-13 PLT803-020C5.
NUT HEX 5/8-11 PLT803-021C6.
WASHER LOCK SPRING 1/2 PLT804-015C7.
WASHER LOCK SPRING 5/8 PLT804-022C8.
DECAL GP PLANTING COMPONENTS838-482C9.

COULTER BLADE (TURBO) 15'" OD820-327C10.

NUT HEX FLANGE 1/2-13 GR G PLT803-193C11.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

Refer to "Hub Assembly (204-084S)"

for breakdown

Used on VIII ONLYCOULTER BLADE-14 DIA STRAIGHT820-259C10.

ShownCOULTER BLADE (FLUTED) 15'" OD820-331C10.

01/14/14 - 77 - 118-949P

Table of Contents Part Number Index

Hub Assembly (204-084S)

(Applies to 1510HDP, 1525P only)

22923

118-949P - 78 - 01/14/14

Table of Contents Part Number Index

Hub Assembly (204-084S)

(Applies to 1510HDP, 1525P only)

Image No.dwg22923
RHSNB 1/2-13X1 1/4 GR5802-214C1.
NARROW HUB BOLT SPACER204-329D2.
NARROW COULTER HUB204-328D3.
BRG BALL 1.18IDX2.44OD 5206KPP822-215C4.
RPBY 800-005C800-232C5.

Openers

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 79 - 118-949P

Table of Contents Part Number Index

1 1/4" x 13 1/2" Double Press Wheel

(Applies to 1510HDP only)

23351

118-949P - 80 - 01/14/14

Table of Contents Part Number Index

1 1/4" x 13 1/2" Double Press Wheel

(Applies to 1510HDP only)

Image No.dwg23351
HHCS 5/8-11X2 1/2 GR5802-058C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.

DOUBLE PRESS WHEEL ARM WLD RH199-065H4.
DOUBLE PRESS WHEEL ARM WLD LH199-066H4.
1 X 12 PRESS WHEEL RIM HALF817-330C5.

1.25X13.5 ANGLE PEAK TIRE814-244C6.
BRG .63ID PRESS WHL ASY822-170C7.
NUT HEX LOCK 1/4-20 FLG803-088C8.
HHCS 1/4-20X1 GR5802-005C9.
PARALLEL ARM PIVOT BUSHING817-084C10.
PRESS WHEEL PIVOT TUBE198-137D11.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C12.
SPRING .540 O.D.X 1 1/4 X.054W807-106C13.
OPENER TRUNION817-347C14.
HFS 1/2-13X3 3/4 GR5 SPTHD802-421C15.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C16.
T-HANDLE ASSEMBLY817-328C17.
PIN ROLL 5/32 X 5/8 PLT805-186C18.

DOUBLE PRESS WHEEL ARM WLD RH199-065H20.
DOUBLE PRESS WHEEL ARM WLD LH199-066H21.
10HD DBL PW ARM WELDMENT RH199-088H22.
10HD DBL PW ARM WELDMENT LH199-089H23.

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

Includes 5-91.25 X 13.5 PRESS WHEEL ASSY814-238C3.

Includes 12-14, 17 & 18PW ADJUSTMENT TRUNNION ASSY122-202S19.

01/14/14 - 81 - 118-949P

Table of Contents Part Number Index

1" x 12" Double "V" Press Wheel

(Applies to 1510HDP only)

23350

118-949P - 82 - 01/14/14

Table of Contents Part Number Index

1" x 12" Double "V" Press Wheel

(Applies to 1510HDP only)

Image No.dwg23350
HHCS 5/8-11X2 1/2 GR5802-058C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
HHCS 1/4-20X1 GR5802-005C3.
1 X 12 PRESS WHEEL RIM HALF817-330C4.
BRG .63ID PRESS WHL ASY822-170C5.
TIRE RUBBER1 X 12814-034C6.
NUT HEX LOCK 1/4-20 FLG803-088C7.

98 1X12 PRESS WHEEL WELDMENT199-022H9.
PARALLEL ARM PIVOT BUSHING817-084C10.
PRESS WHEEL PIVOT TUBE198-137D11.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C12.
SPRING .540 O.D.X 1 1/4 X.054W807-106C13.
OPENER TRUNION817-347C14.
HFS 1/2-13X3 3/4 GR5 SPTHD802-421C15.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C16.
T-HANDLE ASSEMBLY817-328C17.
PIN ROLL 5/32 X 5/8 PLT805-186C18.

10HD DBL PW ARM WELDMENT LH199-089H20.
10HD DBL PW ARM WELDMENT RH199-088H21.

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

Includes 3-71 X 12 PRESS WHL ASSY-5203BRG814-174C8.

Includes 12-14, 17 & 18PW ADJUSTMENT TRUNNION ASSY122-202S19.

01/14/14 - 83 - 118-949P

Table of Contents Part Number Index

2" x 12 1/2" Double Press Wheel

(Applies to 1510HDP only)

23352

118-949P - 84 - 01/14/14

Table of Contents Part Number Index

2" x 12 1/2" Double Press Wheel

(Applies to 1510HDP only)

Image No.dwg23352
HHCS 5/8-11X3 GR5802-059C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
1/4 PW SPACER5/8 DIA405-031D3.
SNAP RING INT 40 MM800-054C4.
BRG .63ID PRESS WHL ASY822-170C5.
2X12.5 CLOSING WHEEL WLDMT RH199-040H6.
2X12.5 CLOSING WHEEL WLDMT LH199-039H7.

DOUBLE PRESS WHEEL ARM WLDMT199-038H10.
PARALLEL ARM PIVOT BUSHING817-084C11.
PRESS WHEEL PIVOT TUBE198-137D12.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C13.
SPRING .540 O.D.X 1 1/4 X.054W807-106C14.
OPENER TRUNION817-347C15.
HFS 1/2-13X3 3/4 GR5 SPTHD802-421C16.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C17.
T-HANDLE ASSEMBLY817-328C18.
PIN ROLL 5/32 X 5/8 PLT805-186C19.
PW ADJUSTMENT TRUNNION ASSY122-202S20.
DOUBLE PRESS WHEEL ARM WLD RH199-065H21.
DOUBLE PRESS WHEEL ARM WLD LH199-066H22.
10HD DBL PW ARM WELDMENT RH199-088H23.
10HD DBL PW ARM WELDMENT LH199-089H24.

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

Must use with item #102X12.5 CLOSING WHEEL ASSY RH199-042S8.
Must use with item #102X12.5 CLOSING WHEEL ASSY LH199-041S9.

01/14/14 - 85 - 118-949P

Table of Contents Part Number Index

2" x 13" Single Press Wheel

(Applies to 1510HDP only)

23348

118-949P - 86 - 01/14/14

Table of Contents Part Number Index

2" x 13" Single Press Wheel

(Applies to 1510HDP only)

Image No.dwg23348
HHCS 5/8-11X2 1/2 GR5802-058C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
2 X 13 PRESS WHEEL RIM HALF817-296C4.
BRG .63ID PRESS WHL ASY822-170C5.
2 X 13 PRESS WHEEL TIRE814-159C6.
HHFS 1/4-20 X 1 1/2 GR 5802-617C7.
2 X 13 PRESS WHEEL ASSEMBLY814-157C8.

PARALLEL ARM PIVOT BUSHING817-084C10.
PRESS WHEEL PIVOT TUBE198-137D11.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C12.
SPRING .540 O.D.X 1 1/4 X.054W807-106C13.
OPENER TRUNION817-347C14.
HFS 1/2-13X3 3/4 GR5 SPTHD802-421C15.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C16.
T-HANDLE ASSEMBLY817-328C17.
PIN ROLL 5/32 X 5/8 PLT805-186C18.

NG UNIVERSAL PRESS WHEEL ARM202-189D20.

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

Includes 3-7UNIVERSAL PW ARM MACH 2&3X13199-042D9.

Includes 12-14, 17 & 18PW ADJUSTMENT TRUNNION ASSY122-202S19.

01/14/14 - 87 - 118-949P

Table of Contents Part Number Index

3" x 13" Single Press Wheel

(Applies to 1510HDP only)

23349

118-949P - 88 - 01/14/14

Table of Contents Part Number Index

3" x 13" Single Press Wheel

(Applies to 1510HDP only)

Image No.dwg23349
HHCS 5/8-11X2 1/2 GR5802-058C1.
WASHER LOCK SPRING 5/8 PLT804-022C2.
NUT HEX LOCK 1/4-20 FLG803-088C3.
3 X 13 PRESS WHEEL RIM HALF817-297C4.
3 X 13 PRESS WHEEL TIRE814-160C5.
BRG .63ID PRESS WHL ASY822-170C6.
HHFS 1/4-20 X 2 GR 5802-618C7.

UNIVERSAL PW ARM MACH 2&3X13199-042D9.
PARALLEL ARM PIVOT BUSHING817-084C10.
PRESS WHEEL PIVOT TUBE198-137D11.
PIN CLEVIS 3/8 X 2 1/8 USABLE805-154C12.
SPRING .540 O.D.X 1 1/4 X.054W807-106C13.
OPENER TRUNION817-347C14.
HFS 1/2-13X3 3/4 GR5 SPTHD802-421C15.
NUT HEX FLG. LOCK 1/2-13 PLT.803-169C16.
T-HANDLE ASSEMBLY817-328C17.
PIN ROLL 5/32 X 5/8 PLT805-186C18.

NG UNIVERSAL PRESS WHEEL ARM202-189D20.

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

Includes 3-73 X 13 PRESS WHEEL ASSEMBLY814-158C8.

Includes 12-14, 17 & 18PW ADJUSTMENT TRUNNION ASSY122-202S19.

01/14/14 - 89 - 118-949P

Table of Contents Part Number Index

25 Series 16 Degree Press wheel Assembly (S/N 11325C-)

(Applies to 1525P only)

22760

118-949P - 90 - 01/14/14

Table of Contents Part Number Index

25 Series 16 Degree Press wheel Assembly (S/N 11325C-)

(Applies to 1525P only)

Image No.dwg22760
118-433DG HANDLE199-011D1.
25P 16 DEG CENTERED PW MOUNT199-059H2.

25P LONG PW MOUNT EXTENSION199-060H3.

25P PW HANDLE SPACER TUBE199-088D4.
1/4 PW SPACER5/8 DIA405-031D5.
HHCS 7/16-14X1 3/4 GR5802-113C6.
HHCS 5/8-11X3 1/4 GR5802-160C7.
NUT HEX 5/8-11 PLT803-021C8.
NUT HEX FLANGE LOC 7/16-14 PLT803-229C9.
WASHER LOCK 7/16 PLT804-014C10.
WASHER LOCK SPRING 5/8 PLT804-022C11.
WASHER FLAT 7/16 SAE PLT804-041C12.
PIN COTTER1/8 X 3/4805-067C13.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C14.
SPRING EXT 1 7/8ODX8 3/8X.25W807-113C15.
20 SER PW ARM PIVOTSPACER TB890-524C16.
BUSHING 3/4OD X 5/8ID X 1/2 LG890-598C17.
1 X 12 PRESS WHL ASSY-5203BRG814-174C18.

1.25 X 13.5 PRESS WHEEL ASSY814-238C19.

Used only on (7" stagger) rows with

split between twin rows
Shown25P SHORTPW MOUNT EXTENSION199-061H3.
Used on 10" row spacing next to

center opener

Refer to "25 Series Press Wheel

Assembly Breakdowns"for

breakdown
Refer to "25 Series Press Wheel

Assembly Breakdowns"for

breakdown

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 91 - 118-949P

Table of Contents Part Number Index

25 Series 16 Degree Press Wheel Assembly (S/N 11326C - 11485C)

(Applies to 1525P only)

31537

118-949P - 92 - 01/14/14

Table of Contents Part Number Index

25 Series 16 Degree Press Wheel Assembly (S/N 11326C - 11485C)

(Applies to 1525P only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg31537
PW SPRING HANDLE199-107D1.
RPBY 199-147A199-109H2.
RPBY 199-146A199-108H2.
25P 16 DEG CENTERED PW MOUNT199-059H3.
25P PW HANDLE SPACER TUBE199-088D4.
20 SER PW ARM PIVOTSPACER TB890-524C5.
1/4 PW SPACER5/8 DIA405-031D6.
HHCS 5/8-11X3 1/4 GR5802-160C7.
HHCS 3/8-16X5 1/2 GR5802-616C8.
NUT HEX 5/8-11 PLT803-021C9.
SPRING ALIGNMENT BUSHING199-113D10.
WASHER FLAT 3/8 USS PLT804-011C11.
WASHER LOCK SPRING 5/8 PLT804-022C12.
RPBY 199-146A OR 199-147A199-106D13.
PIN COTTER1/8 X 3/4805-067C14.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C15.
SPRING 1 5/8 OD X 8.2807-278C16.
1 X 12 PRESS WHL ASSY-5203BRG814-174C17.

1.25 X 13.5 PRESS WHEEL ASSY814-238C18.

PRESS WHEEL ARM PIVOT BUSHING817-083C19.
PIN CLEVIS 5/8 X 3 49/64 USBL805-417C20.
PIN COTTER1/8 X 1 1/4 PLT805-109C21.
NUT FLANGE LOCK 3/8-16 PLT803-209C22.

25P MID PW MOUNT UPDATE199-149H24.
RHSNB 7/16-14X1 3/4 GR5802-030C25.
NUT HEX FLANGE LOC 7/16-14 PLT803-229C26.
WASHER LOCK 7/16 PLT804-014C27.
WASHER FLAT 7/16 SAE PLT804-041C28.
BUSHING 3/4OD X 5/8ID X 1/2 LG890-598C29.

Refer to Press Wheel Breakdown for

breakdown
Refer to Press Wheel Breakdown for

breakdown

Includes items 5, 10, 14, 20 & 24-2925P MID PW MOUNT KIT199-147A23.

Press Wheels

01/14/14 - 93 - 118-949P

Table of Contents Part Number Index

25 Series 16 Degree Press Wheel Assembly (S/N 11486C+)

(Applies to 1525P only)

31536

118-949P - 94 - 01/14/14

Table of Contents Part Number Index

25 Series 16 Degree Press Wheel Assembly (S/N 11486C+)

(Applies to 1525P only)

Image No.dwg
25P PW HANDLE SPACER TUBE199-088D1.
PW SPRING HANDLE199-107D2.
SPRING ALIGNMENT BUSHING199-113D3.
PRESS WHEEL PVT MNT TUBE199-114D4.
LONG PQ MOUNT199-140H5.

Shown25P MID PW MOUNT199-141H5.

25P 16 DEG CENTERED PW MOUNT199-144H6.
1 X 12 PRESS WHL ASSY-5203BRG814-174C7.

1/4 PW SPACER5/8 DIA405-031D8.
HHCS 5/8-11X3 1/4 GR5802-160C9.
HHCS 1/2-13X4 1/2 GR5802-413C10.
NUT HEX 5/8-11 PLT803-021C11.
NUT HEX FLG LOCK 1/2-13 PLT803-169C12.
WASHER LOCK SPRING 5/8 PLT804-022C13.
PIN COTTER1/8 X 3/4805-067C14.
PIN COTTER1/8 X 1 1/4 PLT805-109C15.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C16.
PIN CLEVIS 5/8 X 3 1/4805-432C17.
SPRING 1.8 OC X 11 LG807-278C18.

1.25 X 13.5 PRESS WHEEL ASSY814-238C19.

PARALLEL ARM PIVOT BUSHING817-084C20.

Refer to Press Wheel Breakdown for

breakdown

Refer to Press Wheel Breakdown for

breakdown

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 95 - 118-949P

Table of Contents Part Number Index

25 Series 20 Degree Press Wheel Assembly (S/N 11325C-)

(Applies to 1525P only)

22759

118-949P - 96 - 01/14/14

Table of Contents Part Number Index

25 Series 20 Degree Press Wheel Assembly (S/N 11325C-)

(Applies to 1525P only)

Image No.dwg22759
118-433DG HANDLE199-011D1.
25P SHORTPW MOUNT EXTENSION199-061H2.
25P 20 DEG CENTERED PW MOUNT199-087H3.
25P PW HANDLE SPACER TUBE199-088D4.
PARALLEL ARM PIVOT TUBE404-147D5.
1/4 PW SPACER5/8 DIA405-031D6.
HHCS 5/8-11X4 GR5802-060C7.
NUT HEX METRIC M16 X 1.5 NYLCK803-113C8.
NUT HEX 5/8-11 PLT803-021C9.
NUT HEX FLANGE LOC 7/16-14 PLT803-229C10.
WASHER LOCK 7/16 PLT804-014C11.
WASHER LOCK SPRING 5/8 PLT804-022C12.
WASHER FLAT 7/16 SAE PLT804-041C13.
PIN COTTER1/8 X 3/4805-067C14.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C15.
SPRING EXT 1 7/8ODX8 3/8X.25W807-113C16.
1 X 12 PRESS WHL ASSY-5203BRG814-174C17.

1.25 X 13.5 PRESS WHEEL ASSY814-238C18.

20 SER PW ARM PIVOTSPACER TB890-524C19.
BUSHING 3/4OD X 5/8ID X 1/2 LG890-598C20.

Refer to "25 Series Press Wheel

Assembly Breakdowns"for

breakdown
Refer to "25 Series Press Wheel

Assembly Breakdowns"for

breakdown

Press Wheels

RevisionCommentsPart DescriptionPart No.Ref.

01/14/14 - 97 - 118-949P

Table of Contents Part Number Index

25 Series 20 Degree Press Wheel Assembly (S/N 11326C - 11485C)

(Applies to 1525P only)

29331

118-949P - 98 - 01/14/14

Table of Contents Part Number Index

25 Series 20 Degree Press Wheel Assembly (S/N 11326C - 11485C)

(Applies to 1525P only)

RevisionCommentsPart DescriptionPart No.Ref.

Image No.dwg29331
PW SPRING HANDLE199-107D1.
RPBY 199-147A199-109H2.
RPBY 199-146A199-108H2.
25P 20 DEG CENTERED PW MOUNT199-087H3.
25P PW HANDLE SPACER TUBE199-088D4.
PARALLEL ARM PIVOT TUBE404-147D5.
1/4 PW SPACER5/8 DIA405-031D6.
HHCS 5/8-11X4 GR5802-060C7.
HHCS 3/8-16X5 1/2 GR5802-616C8.
NUT HEX 5/8-11 PLT803-021C9.
SPRING ALIGNMENT BUSHING199-113D10.
WASHER FLAT 3/8 USS PLT804-011C11.
WASHER LOCK SPRING 5/8 PLT804-022C12.
RPBY 199-146A OR 199-147A199-106D13.
PIN COTTER1/8 X 3/4805-067C14.
PIN CLEVIS 7/16 X 3 17/64 USBL805-183C15.
SPRING 1 5/8 OD X 8.2807-278C16.
1 X 12 PRESS WHL ASSY-5203BRG814-174C17.

1.25 X 13.5 PRESS WHEEL ASSY814-238C18.

PRESS WHEEL ARM PIVOT BUSHING817-083C19.
PIN CLEVIS 5/8 X 3 49/64 USBL805-417C20.
PIN COTTER1/8 X 1 1/4 PLT805-109C21.
NUT FLANGE LOCK 3/8-16 PLT803-209C22.

25P MID PW MOUNT UPDATE199-149H24.
RHSNB 7/16-14X1 3/4 GR5802-030C25.
NUT HEX FLANGE LOC 7/16-14 PLT803-229C26.
WASHER LOCK 7/16 PLT804-014C27.
WASHER FLAT 7/16 SAE PLT804-041C28.
BUSHING 3/4OD X 5/8ID X 1/2 LG890-598C29.
20 SER PW ARM PIVOTSPACER TB890-524C30.

Refer to Press Wheel Breakdown for

breakdown
Refer to Press Wheel Breakdown for

breakdown

Includes items 10, 14, 20 & 24-3025P MID PW MOUNT KIT199-147A23.

Press Wheels

01/14/14 - 99 - 118-949P

Table of Contents Part Number Index

25 Series 20 Degree Press Wheel Assembly (S/N 11486C+)

(Applies to 1525P only)

31539

118-949P - 100 - 01/14/14