Great Little Trading Sixpence Play Shop & Theatre L4446 User Manual

1

Sixpence Play Shop & Theatre

L4446

20/08/2018

V1

easy - medium - hard

Assembly Difculty

two-person job

A few important pointers before you start:

• Please read the instructions right through before you start, and check

that all the components have been included in the pack; we nd

separating all the hardware into piles makes it easier to be sure that
everything is present and correct.

• Make sure you have the right tools. Allen keys are provided if required,

but screw drivers and other tools are not. You’ll nd details of the tools

you need at the beginning of the instructions.

• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.

Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.

We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or

www.atpackconstruction.co.uk.

2

Safety Warnings:

• Warning: Not suitable for children under 3 years due to small parts
which may become detached an present a choking hazard.

• Adult assembly required.

• Unassembled product contains small parts which may present a

choking hazard.

• Caution, some children may require assistance from an adult when
manoeuvring the product.

• To avoid possible injury from tipping, do not allow children to climb on
the product.

• Children should be kept away from the product during assembly to
avoid any possible risk of injury.

• Assemble and use on a at and level surface.

• DO NOT use power tools in the assembly of this product as there is a

risk of over-tightening and consequently splitting of the wood.

• This product is heavy, so we recommend that you build it where you
are planning to use it.

• Check all xtures and ttings regularly and tighten as necessary.

• Please retain these instructions for future reference.

Customer Service:

• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.

• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.

Product Care:

• Wipe clean using a soft damp cloth followed by a dry cloth.

• Do NOT use cleaning products which contain ammonia, solvents or

abrasive material.

• Do NOT expose the item to extremes of heat and humidity.

Could we do better?

If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.

All you need to do is drop us a line at [e-mail]

Thank you

3

Component Check List

K L

1x Large Blackboard Panel1x Short Blackboard Panel

A B

C D

E F

G H

1x Middle Shelf1x Base Panel

1x Counter

1x Right Side Door1x Left Side Door

I J

3x Rods

Please note that x1 rod is shorter than

the other 2. The shorter rod is for the

curtain rail, you can identify this rod

as its the only rod with no pre drilled

holes at each end.

1x Headboard

1x Bottom Shelf

1x Left Side Panel

1x Right Side Panel

4

Component Check List

#1 #2

10x Cam Locks

14mm Diameter

10x Cam Dowels

35mmL

#3 #4

#5 #6

#8#7

#10

8x Screws

12mmL

12x Wooden Dowels

20mmL

10x Screws

35mmL

34x Screws

16mmL

2x Pole Cradles2x Pole Cradle Covers

#11

2x Curtains & Tie Backs

#9

4x Castors

These come as one piece and will need separating

2x Magnet Door Catches

#13

Phillips Head Screwdriver

You will need (not supplied)

#12

2x Metal Plates

4x Hinges

1x Canopy

#14

Allen Key

Small Phillips Head Screwdriver

You will need (not supplied)

Parts # 1 0 a n d # 1 1 w i l l

need separating

Parts # 1 0 a n d # 1 1 w i l l

need separating

5

STEP 1: STEP 2:

Attach the 4x castors (#9) to the base panel (C) using the 4x medium screws
(#5) per castor.

#8

#5

6x #3 Wooden Dowels

Hardware for Step 1:

10x #1Cam Dowels

Hardware for Step 2:

16x #5 16mmL Screws

#1

#1

#1

#1

#1

#1

#1#1

#1

#3

#3

#3

#8

#5

2x #8 Pole Cradles

2x #5 16mmL screws

#5

#5

#5

#5

A

B

C

#9

#9

#9

#9

4x

4x

4x

4x

2x

4x #9 Castors

#1

STEP 1:

Lie panels A and B down with drill holes facing up.
Starting with the right hand panel (A), insert 5x
cam dowels (#1) and secure 1x pole cradle (#8)
using x1 medium screw (#5) as shown above.

Repeat the above steps with panel B however in
addition you will need to add 6x wooden dowels
(#3) as shown above.

#3

#3