GreatLite EXPE81-E02 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual EXPE81-E02

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

S

EARCH AND RESCUE SERIES

E81 RECHARGEABLE FLASHLIGHT

Toughened ultra-clear glass lens
with anti-reflective coating

UNPACKING

After unpacking, inspect carefully
for any damage that may have
occurred during transit. Check
for loose, missing, or damaged
parts. If any damage is observed,
a shipping damage claim must be
filed with carrier. Do not use the
flashlight if it appears damaged in
any way, operates abnormally or is
missing parts.

Cree XM-L (T6)
LED Bulb

Anti-roll design

Center body adjustment
ring to change light
modes

Airplane
Aluminium
Casing

Anti-slip design

Tail on/off switch

WARNING

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.

The following safety information is provided as guidelines to help you operate your flashlight under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with
the information necessary for safe use and operation. Please read and retain these instructions for the continued
safe use of your flashlight. Failure to follow instructions listed below may result in serious injury. In addition, make
certain that anyone that uses the equipment understands and follows these safety instructions as well.

Operating Instructions and Parts Manual EXPE81-E02

SEARCH AND RESCUE SERIES

E81 RECHARGEABLE FLASHLIGHT

Thank you very much for choosing a GreatLite
Product!

Save the receipt, warranty and these instructions. It is

important that you read the entire manual to become
familiar with this product before you begin using it. We
strongly recommend this flashlight is not modified
and/or used for any application other than that for
which it was designed. If you have any questions
relative to a particular application, DO NOT use the
flashlight until you have first contacted GreatLite to
determine if it can or should be performed on the
product.

IMPORTANT INSTRUCTIONS
AND SAFETY RULES

1. Know your flashlight. Read this manual carefully.
Learn the flashlight’s applications and limitations,
as well as, potential hazards specific to it.

2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.

3. Keep children away. All children should be kept
away from the work area. Never let a child handle

a tool without strict adult supervision.

4. Use safety equipment. Eye protection should be
worn at all times when working this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat, or hearing protection should be
used in appropriate conditions.

5. Always disconnect the tool from the power source
before making any adjustments, storing, servicing,
or changing accessories. Such preventative safety
measures reduces the risk of starting the tool
accidentally.

6. Do not use the flashlight if the switch does not turn
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.

7. Check for damage. Check your flashlight and
batteries regularly. If part of the flashlight is
damaged it should be carefully inspected to make
sure that it can perform its intended function
correctly. If in doubt, the part should be repaired or
replaced.

8. Keep away from flammables. Do not attempt to
operate this flashlight near flammable materials
or combustibles. Failure to comply may cause
serious injury or death.

PRODUCT SPECIFICATIONS

Mode 50% 25% Flash SOS
Output 500Lumens 250Lumens 125Lumens / /
Runtime 3Hr 6Hr 12Hr 12Hr 12Hr
BeamDistance
ImpactResistance
Water‐proofGrade
Accessories

PART SPECIFIC INSTRUCTIONS

- Uses Cree XM-L (T6) LED bulb, service life is 100,000 hours

- Uses (2) 3V CR123A Li batteries or (1) 18650 Li-ion battery

- Size: 160 mm (Length) x 27 mm (Diameter) x 50 mm (Head)

- Net weight 224.5 g (0.494 Lb.) (excluding battery)

- Constant current circuit, constant brightness

- Anti-reverse design prevents the damage to circuit caused by reverse loading of battery

- Non-slip design body

- Made out of aircraft aluminum

- Surface anti-wear treatment is done by using hard anodizing

- Uses anti-reflection temepered glass lens

200M/656Ft.

1.5M/4.9Ft.
IPX‐8

(1)Li‐onChargingUnit,(1)18650Battery,BeltPouch,Lanyard

2