Physical Features
Measuring Units
Setting the Measuring Unit
Things to Know Before Using Your Scale 6Install Batteries
Get the App
Measuring
Auto-On
Auto-Detection
Press-Awake
What Happens if My Scale Can’t Auto-Detect?
Setup with Wi-Fi7Get the App
Set Up the Scale
Record Your First Weight Entry
Remove a Wi-Fi User
Setup Without Wi-Fi 8Scale Only Setup (No Wi-Fi Connection)
Athlete Mode
Sync With Your Scale9Weigh to Sync
Force Sync
Tips
Reading Your Results10For Best Results
1
Typical Results 11
BMI
Body Fat %
Water Weight %
Muscle Mass %
Bone Mass %
Troubleshooting12Low Battery
Overload
Measuring Error
Resolving An Auto-Detection Conict
How Do I Clear A User Prole On My Scale?
Symbol for “ENVIRONMENT PROTECTION“
– Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for
recycling advice.
2
Important Safety Notes
Warnings
• Never use, or allow others to use this unit in combination with the
following medical electronic devices:
• Medical electronic implants such as pacemakers
• Electronic life support systems such as an articial
heart/lung
• Portable electronic medical devices such as an
electrocardiograph
• This scale passes a harmless and unnoticeable electrical current
through your body when taking a measurement. This electrical
current is not felt while using the scale. This unit may cause the
above mentioned medical devices to malfunction.
• This product is not intended for use by pregnant women.
• This product is not intended for use by infants, toddlers, and
children under 10 years of age.
• Do not step on the edge of the scale while getting on or o,
otherwise it may tip.
• Do not jump on scale.
• Protect scale from hard knocks, temperature uctuations, and
heat sources that are too close (e.g. stoves, heating units).
• Do not drop scale or drop any objects on it as this may damage
the sensors.
• Do not step or stand on the scale when your body and/or feet are
wet. For example, after taking a shower.
• Do not step on the scale when the surface is wet. There is a
danger of slipping.
• Please be aware that the measurements obtained from this body
analysis scale represent only an approximation.
• Do not step on this scale if you weigh more than 400 lbs.
• Place the scale on level ooring, otherwise it may tip.
• Clean the scale with a slightly damp cloth. DO NOT immerse the
scale in water or use chemical/abrasive cleaning agents.
3
Introduction
Welcome to your new Weight Gurus Scale.
Being healthy is worth the eort! That’s why we’ve designed
the Weight Gurus Scale to be more than just another scale. It’s a
beautifully designed, fully featured body composition scale that,
when desired, connects directly to Weight Gurus and other health
apps. This lets you track your progress over time, helping you stay
motivated and reach your goals.
To automatically sync your results to these apps, download the
free “Weight Gurus” App for iOS (Apple) or Android (see more
information on page 7).
OUR PROMISE
We’re committed to creating 5-star products.
If we haven’t delivered on our promise, please contact us.
For the best possible experience with your product,
please visit greatergoods.com/0385.
4
Scale Description
Physical Features
LCD Display
Conductors
UNIT Button
Battery Compartment
Measuring Units
lbpound
kgkilogram
Setting The Measuring Unit
By pressing the UNIT button on the back of the scale, you can
switch between lb. (pound) and kg (kilogram).
5
Things To Know Before Using Your Scale
Install Batteries
Make sure to install the four included AAA batteries before using the scale for
the rst time.
Get the App
Search for the “Weight Gurus” app in your device’s app store. Install and
register an account to get started tracking.
Measuring
Measuring your weight and calculating body composition is easy. Simply
step on your scale with bare feet, and evenly distribute your weight. Make
sure that your feet are making good contact with all four conductors. Body
composition can only be displayed if you have properly set up a user prole
on your scale (page 7).
Auto-On
Auto-On is the easiest way to use your scale. Simply step on the weighing
surface with both feet and evenly distribute your weight. Once you
complete user set up (page 7), Auto-Detection will match you to your prole
automatically. If no match is made to a user prole, then the scale will only
display your weight information. Body composition calculations require
specic variables such as your height, gender, and activity level, so a user
prole must be setup in order to display those measurements.
Auto-Detection
Once a prole has been set up, your scale will automatically match you to
your correct prole by weight. The scale determines who the user is by using
a range of 10 lbs. and in some cases a conict may arise if two or more users
are within 10 lbs. of each other (see “Troubleshooting” for resolving an AutoDetection conict).
Press-Awake
Another easy way to turn on your scale is to briey step on then o the
weighing area of your scale. Press-Awake allows you to enter setup mode to
create or edit a new user (see User Setup, page 7). If needed, it also allows
you to select your user prole manually.
What Happens if My Scale Can’t Auto-Detect?
Only the weight data is shown and the scale will turn o after a few seconds.
Please manually select your user number and measure once again
(Press-Awake, select user number, Tap SET, then weigh).
6
Setup With Wi-Fi (Recommended)
Get the App
Search for the “Weight Gurus” app in your smartphone’s app store. Install
and register an account to get started tracking.
Connect Your Scale
Set Up the Scale
1. From the Weight Gurus app menu ( ), select Wi-Fi Setup.
2. Follow the setup steps within the app to nish setting up your user
information and connect your scale.
Record Your First Weight Entry
After setup, step on your scale with bare feet, evenly distribute your weight
on all four conductors, and the scale is ready to record the rst entry.
Remove a Wi-Fi user
1. Turn on the Scale.
2. Press & Hold SET.
3. Use UP / DOWN to select the user to remove.
4. Press SET.
5. Use UP / DOWN to select Clr YES.
6. Press SET.
7
Setup Without Wi-Fi
NOTE: Setting up without Wi-Fi is not recommended.
Only use this method if you do not wish to have your results
automatically synced.
Please see page 7 for setup instructions if you plan on using Wi-Fi
to sync measurements to the cloud.
IMPORTANT: Place your scale on a hard at surface, and be ready with
bare feet to record your rst weight entry on the last step. This scale can
be customized for up to 8 users.
Scale Only Setup (No Wi-Fi Connection)
1. Press-Awake your scale on. Simply step on then o to begin.
2. Press and hold SET.
3. Use and to make selections, then tap SET to select and continue
for each option below.
User NumberChoose a user prole number, tap SET
Athlete Mode
Male Male Athlete Female Female Athlete
(See description below)
HeightSelect your height, tap SET
AgeSelect your age, tap SET
IMPORTANT: YOU MUST NOW WEIGH TO RECORD YOUR INITIAL WEIGHT ENTRY
WeightStep on the scale with bare feet, evenly distributing
your weight. Make sure that your feet are making
good contact with all four conductors.
*At any time in the setup process, if you have to leave or the screen shuts o due to
inactivity, just start over from number one above.
Athlete Mode
An athlete is dened as a person who is involved in intense physical
activity approximately 12 hours per week and who has a resting heart
rate of approximately 60 beats or less per minute.
8
Sync With Your Scale
Weigh to Sync
Once setup has been completed, simply weigh to sync measurements to
the cloud. Syncing will occur to your user account as long as your scale is
within range of your Wi-Fi router.
After weighing the Wi-Fi symbol will turn on and a syncing
animation will begin. The syncing animation will continue
until the Wi-Fi sync is complete.
The data symbol indicates measurement data is waiting to be
synced to your device. Upon successfully syncing, this will go
away. If measurements are not synced, it will display the next
time you weigh, indicating unsynced measurements.
Force Sync
If for some reason your weights do not sync automatically, you can force
sync them using the following steps:
1. Press-Awake the scale.
2. Press and hold the UP ARROW for three seconds.
3. Use the arrows to select SYnC, then press SET. This will force
the scale to attempt to sync all weight entries still on the scale.
Tips
Your scale will give an audible beep when it turns on, when
measurements are completed, and once again when it has successfully
synced to your device. If syncing cannot be completed at the time,
three short beeps will indicate a failed sync. If a failure occurs, your
measurements will store in the scale and attempt to sync the next time
you complete weighing.
9
Reading Your Results
Once you have properly weighed yourself, the scale will cycle through the
measurements it has calculated for you.
BMIBody FatMuscleBoneWater
For Best Results
Remember to place your scale on a hard level surface. Step on the scale
with bare feet, evenly distributing your weight. Make sure that your bare
feet are making good contact with all four conductors.
Using this scale on carpet will not give accurate results.
Wearing socks during weighing will result in incorrect body composition
measurements.
It is important to follow a routine. We recommend weighing daily around
the same time each day. Alternatively, you can weigh weekly. When
weighing weekly, we recommend weighing on the same day each week.
Weighing under the same conditions will help ensure accurate results.
Weight can vary due to dierent clothing selections, weighing at dierent
times of day, weighing before or after meals, etc. Following a routine will
help achieve accurate results.
Understand the Value of Body Composition Results
Because every body is dierent, body composition readings are not exact
measurements. Instead, they are estimations based on the readings your
scale takes when you weigh yourself. While these numbers are estimates,
they are helpful for understanding trends and how your body is changing
over time. We recommend watching these trends rather than focusing on
an individual number.
10
Typical Results
Keep in mind that you know your body best. The following ranges of
Body Fat %, Water Weight %, BMI, Muscle Mass %, and Bone Mass % are
oered only as guides.
The best way to understand your body composition is to watch for
changes. For example, watch to see how your body fat is going up or
down over time.
15 - 21%57 - 63%
22 - 24%55 - 57%
25 and over 37 - 55%
4 - 20%58 - 70%
21 - 29%52 - 58%
30 - 32%49 - 52%
33 and over 37 - 49%
FemaleMale
BMI
BMIWeight Status
<18.5Underweight
18.5 - 24.9Normal
25 - 29.9Overweight
30+Obese
Muscle Mass %
FemaleApprox. 30%
MaleApprox. 40%
11
Scale Troubleshooting
Low Battery
A low battery symbol is displayed when the batteries need to be
replaced. Open the battery door on the back of the scale, and remove
and replace the batteries with four AAA batteries.
Overload
Dashes are displayed when overload occurs and the scale has
too much weight (Capacity: 180kg / 397lb). Please remove the weight
from the scale to protect the scale sensors.
Measuring Error
If the scale has trouble measuring your weight, it will turn o. This is most
likely due to not settling on the scale fast enough. Make sure that the
scale is placed on a hard at surface (not carpet) and that you distribute
your weight evenly while holding still.
Resolving An Auto-Detection Conict
An Auto-Detection conict will occur if two or more users are within 10lbs
of each other. When an Auto-Detection conict occurs, your scale will
give you a chance to select your prole number manually. Use the arrows
to select your prole, tap SET, and step on the scale. The scale will now
proceed measuring for the prole you have selected.
How Do I Clear A User Prole On My Scale?
First, Press-Awake the scale on, then press and hold SET. Now, select the
user to delete and press SET. Once selected, press the up arrow to change
Clr to “Y.” Now press SET to clear the user. The user is now removed.
12
Wi-Fi Troubleshooting / Error Codes
My Device won’t Connect to Wi-Fi / Update
To verify your device’s Wi-Fi connection, use the CHEC Mode. When the scale is
on, press the UP ARROW for three seconds until you get to the menu for SYnC
and CHEC. Use the arrows again to change to CHEC mode and press SET. This
mode veries whether you can connect to the internet with your scale.
While performing the connection check, you scale will display 1, 2, 3, and 4.
These numbers indicate the following:
1. Wi-Fi Module okay.
2. Connected to router.
3. Connected to internet.
4. Updated.
Occasionally the scale may have an error, either on the scale itself or with
the Wi-Fi module. If this happens, refer to our table below for the meaning
of the code and next steps.
There are three types of Wi-Fi error codes to display:
1. Wi-Fi Module Errors: Displayed as “ER##” “Err”.
2. Wi-Fi Module Failures: Displayed as “I###” “Err”.
3. Scale Timeout Errors: Displayed as “t###” “Err”.
For a full list of error codes and solutions, please visit the scale information
page at www.greatergoods.com/0385.
ERROR TYPEERROR ACTION
GENERAL ERRORS
Connection Errors
ErrorER DWi-Fi disconnected. Let the scale power down and try
again. If this error continues, you may be too far from
your Wi-Fi router or your router may be having trouble
maintaining a connection with the internet or Wi-Fi
devices.
ErrorER21Error connecting to access point / router. Cannot
connect. If error continues, try to set up scale again.
FailureI212No route connection settings. Wi-Fi module needs to
be set up.
13
Error Codes (cont.)
ERROR TYPEERROR ACTION
Timeoutt163
t206
t313
t323
Initialization Errors
ErrorER20Error initializing Wi-Fi module. Try again. If error
Timeoutt162
t202
t312
t322
Misc. Errors
ErrorER22Misc. error. Let the scale power down and try again.
ErrorER AError in access point setup. Begin scale setup again.
Timeoutt204Error entering AP setup mode. Try again.
Timeoutt205Error waiting for setting info in AP setup mode.
Timeoutt207Error waiting for time update. See t164 error below.
Timeoutt208Error waiting for user info update. See t166 error
ErrorER40Error requesting time update. Try again.
ErrorER41Error receiving time update. Try again.
Failurel412Failure response from time server. Try again.
Timeoutt164Time server not responding. Make sure internet
Error waiting for connection to form. Make sure
credentials are correct and that you are within range
of your Wi-Fi router and try again.
continues, Wi-Fi module may be broken.
Module initialization timeout. Try again. If this
continues to happen, the Wi-Fi module may be
broken.
ERRORS SETTING UP SCALE
below.
UPDATE TIME ERRORS
connection is live and try again.
14
Error Codes (cont.)
ERROR TYPEERROR ACTION
UPDATE USER INFO ERRORS
ErrorER50Error requesting user update.
ErrorER51Error receiving user update.
FailureI512Bad data response from server. Try again later.
FailureI513Server not responding. Try again later.
Timeoutt166API server not responding. Try again later.
ERROR SYNCING DATA AFTER WEIGH IN
ErrorER30Error sending data. Error in data transfer. Try again.
ErrorER31Error receiving data. Error in data response.
Try again.
FailureI312Bad data response from HTTP server. If this continues,
clear user and setup scale again.
FailureI313Server not responding. Try again later.
Timeoutt165Server not responding. Try again later.
WI-FI CHECK & UPDATE ERRORS
ErrorER70Error requesting software update. Server may be
down. Try again later.
ErrorER71Error updating software. Try again later.
FailureI325Error in FOTA update process. Try again later.
Timeoutt325Time server not responding. Make sure internet
connection is live and try again.
WI-FI SYNC ALL ENTRY ERRORS
Timeoutt314Server not responding. Try again later.
Timeoutt315Time server not responding. Make sure internet
connection is live and try again.
15
FCC Information
Radio Frequency Interface Requirements - FCC
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected;
• Consult the dealer or an experienced radio / TV technician for help.
Radio Transmitters (Part 15)
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding
the FCC radio frequency exposure limits, human proximity to the antenna
shall not be less than 20 cm (8 inches) during normal operation.
FCCID: 2ADUL-0385
16
Maintenance / Technical Specications
Cleaning
Your scale is not waterproof. Never immerse the scale in water or place
it in a dishwasher. To clean the scale platform, use a soft, slightly damp
cloth or sponge. For stains or other residue, use a mild dish washing soap.
Never use harsh cleaners or treated cloths.
Changing The Batteries
Your scale uses 4 AAA batteries. To change the batteries, open the battery
door on the bottom of the scale, remove the old batteries, and replace
them with the + end oriented as shown in the battery compartment.
Disposal
Batteries should be disposed of separately from household waste.
Always dispose of batteries according to your local regulations.
Dispose of this device in accordance with your local regulations.
Technical Specications
Weight unit: lb. / kg
Capacity: 397lb / 180kg
Division: 0.2lb / 0.1kg
Minimal weight: 5kg
Function keys: , SET,
Display: Positive LCD, Backlight
Batteries: 4 AAA
User No.: 8
Age range: 10 - 85
Stature range: 3ft 3.5inches to 7ft 2.5inches / 100-220cm
Measurements calculate: Body weight, BMI, body fat, water weight, muscle mass,
and bone mass
Working temperature: 32ºF-104ºF / 0ºC-40ºC
Working humidity: ≤90% RH
Atmospheric pressure: 80kPa-106kPa
Storage temperature: -4ºF - 140ºF / -20ºC - 60ºC
Storage humidity: ≤93% RH
Atmospheric pressure: 50kPa-106kPa
Protection against ingress of water: IP21. IP21 means the device could protected
against solid foreign objects of 12.5 mm and greater, and against vertically falling
water drops.
Software Version: 1.0
17
Warranty
Your scale is warranted by the manufacturer against defects in
materials and workmanship for ve (5) years from the original
purchaser from the date of purchase. Proof of purchase is required.
The warranty is void if the product has been subjected to
mechanical damage or mistreatment, such as immersion. This
warranty is in lieu of all other warranties, and limits the liability of
the manufacturer. This warranty gives you certain legal rights and
you may have other rights depending on the state in which the
product was purchased.
If your scale is defective, please contact Greater Goods, LLC.
Distributed by:
Greater Goods, LLC
125 N. Main St.
Suite 202
St. Charles, MO 63301
INDICATIONS FOR USE: The Weight Gurus Body Fat Analyzer measures weight
and uses bio-electrical impedance analysis (BIA) technology to estimate body
fat, total body water percentage, bone mass, and muscle mass in generally
healthy children 10-17 years old and healthy adults.
It is intended for use in the domestic setting only.
info@greatergoods.com
(toll free) 866-991-8494
greatergoods.com/0385
18
If you have any questions about your product, please contact us.
Distributed by:
Greater Goods, LLC
125 N. Main St.
Suite 202
St. Charles, MO 63301
info@greatergoods.com
(toll free) 866-991-8494
greatergoods.com/0385
A GREATER GOODS BRAND
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.