Great day LNPHH650, LAWN PRO LNPHH650 Instructions Manual

CONTENTS-SEE FIGURE 1

1- HI-HITCH BODY
4- BRACE ARMS
1- 5/8” LOCKNUT
2- 5/8” FLAT WASHERS
1- 5/8” X 2 1/2” BOLT
1- 1/4” X 2 1/2” BOLT
2- 1/4 X 1” BOLTS
6- FLAT WASHERS
3- 1/4” LOCK NUTS
**NOTE** 2- FLAT WASHERS & 1­1/4" X 2 1/2” BOLT ARE SHOWN IN
FIGURE 1 ATTACHING 2 OF THE
BRACES TO THE HI-HITCH BODY.
**2- 5/8” FLAT WASHERS ARE NOT
PICTURED. **

LAWN PRO™ LAWN MOWER

HI-HITCH

MODEL: LNPHH650

READ ALL INSTRUCTIONS BEFORE USING THE LAWN PRO LAWN MOWER HI-HITCH

NOTE: DO NOT EXCEED TRAILER CAPACITY OF LAWN MOWER. FAILURE TO READ

INSTRUCTIONS COULD RESULT IN INJURY OR DEATH.

Instructions for Installation and Use:

FIG. 1

STEP 1-

ATTACH BRACE ARMS TO HI-HITCH BODY USING 1/4" X 2 1/2" BOLT, FLAT WASHERS
AND LOCK NUT. TIGHTEN UNTIL SLIGHTLY SNUG. BRACE ARMS SHOULD BE ABLE TO
PIVOT.

STEP 2-

CONNECT HI-HITCH BODY TO LAWN MOWER TRAILER MOUNTING HOLE WITH 5/8” X 2
1/2” BOLT, FLAT WASHERS AND LOCK NUT. TIGHTEN ONLY UNTIL SNUG. HI-HITCH
SHOULD BE ABLE TO PIVOT SIDE TO SIDE.

STEP 3-

POSITION BRACE ARMS AGAINST BACK OF LAWN MOWER AND MARK FOR DRILLING.

SWING BRACE ARMS OUT OF THE WAY. DRILL MARKED HOLES WITH A 5/16” DRILL

BIT.
**NOTE** MAKE SURE THERE ARE NO OBSTRUCTIONS BEHIND BACK PLATE OF LAWN
MOWER BEFORE DRILLING.

STEP 4-SEE FIGURE 5

ALIGN HOLES IN BRACE ARMS WITH DRILLED HOLES IN LAWN MOWER AND FASTEN
WITH THE ¼” X 1” BOLTS, FLAT WASHERS AND LOCK NUTS. TIGHTEN SECURELY.

STEP 5-SEE FIGURE 6

TIGHTEN REMAINING HARDWARE SECURELY.

NEVER EXCEED THE TRAILER CAPACITY OF THE LAWN MOWER.

For more information about this or other products, contact us at:

604 Kimbrough Dr. * Tallulah, LA 71282 * [phone] * www.greatdayinc.com

Great Day, Inc.