Grayhill 62N User Manual

Page 1
62NXX-XXXC
XXXX X-X
GRAYHILL
6 5 4 3 2 1
CONNECTOR VERSION
STRIPPED CABLE VERSION
.320 (8,13) REF.
.250 + .002 (6,35 + 0,05) DIA.
.312 (7,9)
.375 + .015 (9,5 + 0,38)
.250 (6,35)
.250
(6,35) .540 (13,72)
.066. + 002 (1,68 + 0,05)
.390 (9,91)
.250 (6,35)
.500 (12,7)
.152 (3,86)
.219 + .003 (5,6 + 0,1)
3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 OF SHOULDER.
DIM. 4.000 "+.20”
.670 + .015 (17,02 + 0,38)
.592 + .015 (15,04 + 0,38)
.125 + .002 (3,18 + 0,05) DIA.
.375 + .015 (9,5 + 0,38)
.250 (6,35)
.094 + .003 (2,4 + 0,08)
.100 (2,54) STRIPPED AND TINNED
CONNECTOR IS AMP P/N 215083-6, .050 (1,27) CENTERS P/N 640443-6, .100 (2,54) CENTERS
28 AWG CABLE WIRES ON .050 (1,27) CENTERS
62NXX-P
XXXX X-X
GRAYHILL
6 5 4 3 2 1
3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 OF SHOULDER
.470 + .020 (11,9 + 0,5)
.450 + .010 (11,43 + 0,3)
.100 (2,54) TYP.
.940 + .050 (23,8 + 1,3)
.066 + .002 (1,68 + 0,05)
.250 (6,35)
.540 (13,72)
.152 (3,86)
.250 (6,35)
.500 (12,7)
.522 (13,26)
.219 + .003 (5,6 + 0,1)
.301 (7,6)
.602 (15,29)
.250 + .002 (6,35 + 0,05) DIA.
.250 (6,35)
.375 + .015 (9,5 0,38)
.312 (7,9)
.620 (15,7)
.094 + .003 (2,4 + 0,08)
.375 + .015 (9,5 + 0,38)
.125. + 002 (3,18 + 0,05) DIA.
.250 (6,35)
.592 + .015 (15,04 + 0,38)
.670 + .015 (17,02 + 0,38)
.267 + .015 (6,8 + 0,38)
Top View
Front View
Side View
Front View
Side View
Top View
Optical Encoders
SERIES 62N
1/2'' Package, non-turn, Dedicated Shaft
FEATURES
• Non-turn Pushbutton to Ensure Pushbutton Text and Orientation
• Seperate Pushbutton Function
• Low Cost
• Economical Size
• Optically Coupled for More than a Million Cycles
• Compatible with CMOS, TTL and HCMOS Logic
DIMENSIONS in inches (and millimeters)
Cable Version
Optical and Mechanical
Encoders
• Available in 12, 16, 24, and 32 Detent Positions (Non-detent also available)
• Choices of Cable Length and Termi­nations
APPLICATIONS
• Global Positioning/Driver Information
Systems
• Medical Equipment
• Cockpit Controls
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Unless otherwise specied, standard tolerances are ±0.10 (0,25)
Page 2
SPECIFICATIONS
OUTPUT
A
OUTPUT
B
HIGH
LOW
HIGH
LOW
POSITION NUMBER
1 2 3 4 5 6
1
2
3
4
5
6
POWER +5V
OUTPUT A
OUTPUT B
N.O.
PUSH­BUTTON SWITCH
GROUND
PIN #
R*
R*
Pushbutton Switch Ratings
Rating: at 5 Vdc, 10 mA, resistive Contact Resistance: less than 10 ohms (TTL
or CMOS compatible)
Pushbutton Life: 3 million actuations mini- mum Voltage Breakdown: 250 Vac between mutu- ally insulated parts
Contact Bounce: less than 4 mS at make and less than 10 mS at break
Actuation Force: 1000 ±300g Pushbutton Travel: .010/.025 inch
Encoder Ratings
Coding: 2-bit quadrature coded output Operating Voltage: 5.0 ±.25 Vdc Supply Current: 30 mA maximum@5.0 Vdc Logic Output Characterisitics: Logic High: 3.8 Vdc minimum Logic Low: 0.8 Vdc maximum Mechanical Life: 1,000,000 cycles minimum
(One cycle is a rotation through all positions and a full return)
Minimum Sink Current: 2.0 mA for 5 Vdc Power Consumption: 150mW maximum Output: open collector phototransistor Logic Rise and Fall Times: less than 30 mS
maximum
Optical Encoders
Operating Torque:
Detent: 2.0 in-oz ±70% initially Non-Detent: less than 1.5 in-oz initially
Shaft Push Out Force: 45 lbs minimum Mounting Torque: 15 in-lbs maximum Terminal Strength: 15 lbs cable pull-out force
minimum
Operating Speed: 100 RPM maximum
Environmental Ratings
Operating Temperature Range: -40°C to 85°C Storage Temperature Range: -55°C to 100°C Vibration Resistance: Harmonic motion with
amplitude of 15G, within a varied 10 to 2000 Hz frequency for 12 hours Mechanical Shock: Test 1: 100G, 6 mS, half sine, 12.3 ft/s; Test 2: 100G, 6 mS, sawtooth,
9.7 ft/s
Relative Humidity: 90–95% at 40°C for 96 hours
Materials and Finishes
Code Housing: Reinforced thermoplastic Shafts: Aluminum Bushing: Zinc casting Shaft Retaining Ring: Stainless steel Detent Spring: Stainless steel Printed Circuit Boards: NEMA grade FR-4
gold over nickel or palladium
Terminals: Brass, tin-plated Mounting Hardware: One brass, nickel-plated
nut and zinc-plated spring steel with clear
trivalent chromate nish lockwasher supplied with each switch. (Nut is 0.094 inches thick by
0.433 inches across ats)
Rotor: Thermoplastic Code Housing: Thermoplastic Pushbutton Dome: Stainless steel Dome Retaining Disk: Thermoplastic Pushbutton Housing: Thermoplastic Phototransistor: Planar Silicon NPN Infrared Emitter: Gallium aluminum arsenide Pushbutton Contact: Brass, nickel-plated Flex Cable: 28 AWG, stranded/top coated wire,
PVC coated on .050 or .100" centers (cabled version)
Header Pins: Phospher bronze, tin-plated Spacer: Thermoplastic Endcap: Thermoplastic Non-turn Pin: Stainless steel Backplate/Strain Relief: Stainless steel Studs: Stainless steel
Optical and Mechanical
Encoders
CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code
Clockwise Rotation
Position Output A Output B
1
2
3
4
Indicates logic high; blank indicates logic
low. Code repeats every 4 positions.
• •
ORDERING INFORMATION
Series and Style = 1/2" package, non-turn, dedicated shaft Angle of Throw: Detent Non-detent
11 = 11.25° or 32 pos. 01 = 11.25° or 32 positions 15 = 15° or 24 positions 05 = 15° or 24 positions 22 = 22.25° or 16 positions 02 = 22.5° or 16 positions 62N22-040S 30 = 30° or 12 positions 00 = 30° or 12 positions Termination: S = Stripped cable; .050" centers SH = Stripped cable; .100" centers C = Connector; .050" centers CH = Connector; .100" centers P = Pin; .100" centers Cable Termination: 040 = 4.0in. Cable is terminated with Amp Connector P/N 215088-6. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins (Ex: 62N22-P)
Custom materials, styles, colors, and markings are available. Control knobs available.
Available from your local Grayhill Component Distributor.
For prices and discounts, contact a local Sales Ofce, an authorized local Distributor, or Grayhill.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
These switches have Quadrature 2-bit code output and an optional shaft actuated pushbutton switch.
Loading...