987070 - G Series
987071 - G Series
987072 - G Series
08471600E 5/01
Supercedes 08471600, A, B,C, D
Printed in USA
T
HE
M
ANUAL
P
RODUCT
R
EGISTRATION
Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
Hardware descriptions are given in decimals.
Decimals to Fractions
.0631/16.5639/16
.1251/8.6255/8
.1883/16.68811/16
.2501/4.7503/4
.3135/16.81313/16
.3753/8.8757/8
.4387/16.93815/16
.5001/21.001
ERVICE
S
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
AND
EPLACEMENT
R
P
ARTS
A warranty registration card must be filled out, signed,
and returned at time of purchase. This card activates the
warranty. Claims meeting requirements during limited
warranty period will be honored.
OUR
Y
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Gravely parts
and lubricants manufactured with the same precision
and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
TO SPEED PARTS ORDERING:
1. Know the model and serial numbers of your unit.
2. Know the part number required.
3. Know the quantity required.
4. Know the part description.
ATISFACTION
S
S
MPORTANT
I
I
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Gravely replacement parts. The replacement of
any part on this vehicle with anything other than a
Gravely authorized replacement part may adversely
affect the performance, durability, or safety of this unit
and may void the warranty. Gravely disclaims liability for
any claims or damages, whether warranty, property
damage, personal injury or death arising out of the use of
unauthorized replacement parts.
2
M
ODELS
Model 987070
16 H.P. Briggs & Stratton with Hydraulic Lift
Serial No. 000101 and up
Model 987071
13.5 HP Robin Engine with Hydraulic Lift
Serial No. 000101 and up
Model 987072
20.5 H.P. Robin with Hydraulic Lift
Serial No. 000101 and up
90207551Weldment, Shift Rail
10 0180111Gear, Spur 2SP 10 Diametral Pitch 36 Teeth
11 0180071Assembly, Gear and Bearing
12 0067421Washer, Thrust Hardened .75 x 1.24 x .062
13 0111353Ring, Retaining-Internal .75 x .042
14 0513201Gear, Bevel
15 0180031Gear, 10 Diametral Pitch 16 Teeth x .75
16 064133001Washer, Hardened-Thrust .76 x 1.25 x .094
17 0204441Spring-Compression .085 x .80 x 1.00
18 4212021Pin-Roll .19 x 1.00
19 0179291Arm, Shifter
20 0211411Washer-Felt .44 x 1.00 x .031
21 0179251Bushing, Flange-Bronze .63 x .50 x 1.00
22 0180351Seal .75 x 1.63 x .25
23 0506041Hub,Clutch
24 0463231Seal 2.25 x 3.25 x .38
25 0463211Bearing-Ball 1.97 x 3.54 x .80
26 0463221Ring-Retaining-Internal 3.54 x .11
27 0179191Ring-Retaining-External 1.82 x .062
28 0179131Bearing-Needle .75 x 1.00 x .75
6
10
11
4
12
14
6
6
9
7
13
15
7
16
28
PJ0071
7
Model 987070, 071, 072
1
2
N
UMBER
T
WO
S
HAFT
- R
EVERSE
C
LUTCH
18
4
5
3
4
6
8
3
4
7
10
9
13
3
6
1
12
14
15
16
8
3
11
17
PJ0081
Item Part No.Qty. Description
14317872Key-Woodruff .19 x .63
20347301Shaft, Splined Reverse Clutch
30364076Washer-Hardened-Thrust .76 x 1.23 x .031
40067413Bearing-Needle Thrust .75 x 1.24 x .078
50180201Gear,Idler Assembly
60179494Bearing-Roller .75 x 1.0 x .50
70180031Gear,10 Diametral Pitch 16 Teeth x .75
80111353Ring-Retaining-Internal .75 x .042
90067421Washer-Thrust-Hardened .75 x 1.24 x .062
10 0179471Assembly, Reverse Gear and Bearing
11 0204441Spring-Compression .09 x .80 x 1.00
12 0179191Ring-Retaining-External 1.82 x .062
13 0188721Ring-Retaining-Internal 3.52 x .11
14 0179151Bearing-Ball 1.97 x 3.14 x .63
15 0179171Seal 2.25 x 3.00 x .38
16 0515551Hub,Clutch
17 0180351Seal .75 x 1.63 x .25
18 0110631Bearing-Needle .75 x 1.00 x .75
8
N
UMBER
7
T
HREE
, F
OUR
AND FIVE SHAFTS
NUMBER THREE - 3RDAND 4TH GEAR
1
4
Model 987070, 071, 072
2
3
NUMBER FOUR - IDLER
12
6
8
NUMBER FIVE - 1STAND 2ND GEAR
10
12
9
5
11
5
6
7
PJ0091
9
12
PJ0101
6
12
Item Part No.Qty. Description
10180001Washer-Thrust .06 x 1.15 x .093
20179991Bushing-Sleeve Steel 1.03 x 1.13 x .46
30195351Gear
40179971Shaft, Splined
50179922Gear, 10 Diametral Pitch 16 Teeth x .75
60151183Gear, 10 Diametral Pitch 20 Teeth x .60
70179141Bearing-Needle .63 x .81 x .75
80179951Shaft, Splined
90151152Gear, 10 Diametral Pitch 30 Teeth x .50
10 0179931Bushing-Sleeve Steel 1.03 x 1.13 x 1.13
11 0179891Shaft, Splined
12 0179134Bearing-Needle .75 x 1.00 x .75
9
PJ0111
NUMBER SIX SHAFT - BRAKE / SLIDING GEAR
Model 987070, 071, 072
1
4
5
2
7
3
6
13
8
9
10
11
18
14
15
26
20
17
19
23
24
Item Part No.Qty. Description
1059655001Bolt-Hex .50-13 x 2.75 Grade 5
2064419001Washer-Flat-Steel .53 x 1.06 x .095
30181651Bushing-Sleeve Steel .55 x .75 x 2.06
4065353001Nut-Locking-Center .62-11
50407321Assembly, Brake Band
60213711Drum-Brake
74212021Pin-Roll .19 x 1.00
80179451Arm, Shifter
90211411Washer-Felt .44 x 1.00 x .031
10 0179441Arm, Shifter
11 2710891Key-Woodruff Hard .13 x .38 Hard
12 0179431Bushing-Flange Bronze .76 x 1.13 x .75
13 0151371Seal .75 x 1.25 x .136
14 0180181O-Ring .625 x .75 x .062
15 0179401Weldment, 1st and 3rd Shifter
16 0179371Weldment, 2nd and 4th Shifter
17 0149881Gear, 8 Diametral Pitch 16 Teeth x .85
18 0149871Ring-Retaining External .92 x .125
19 0213701Shaft, Slide Gear
20 0149891Gear, Sliding 10 Diametral Pitch 36 Teeth x .59
21 0149951Gear, Sliding 10 Diametral Pitch 30 Teeth x .59
22 064133001Washer-Hardened-Thrust .76 x 1.25 x .094
23 0207611Weldment, Rail Shift Fork 1 and 3
24 4563842Pin-Roll .25 x .75
25 0207621Weldment, Rail Shift Fork 2 and 4
26 0179132Bearing-Needle .75 x 1.00 x .75
12
16
21
22
26
PJ0121
10
NUMBER SEVENAND EIGHT SHAFTS
NUMBER SEVEN -PINION / FINAL DRIVE
2
Model 987070, 071, 072
8
4
1
3
1
4
NUMBER EIGHT - DIFFERENTIAL ASSEMBLY
17
9
10
12
11
5
6
15
16
13
12
13
14
15
10
11
9
8
PJ0131
17
Item Part No.Qty. Description
10193402Washer-Hardened-Thrust 1.00 x 1.55 x .03
20179871Gear, 8 Diametral Pitch 30 Teeth x .75
30179861Pinion / Final Drive
40179121Bearing-Needle 1.00 x 1.25 x .75
5065298004Nut-Locking-Center .31-18
60205144Nut-Hex .31-18 Grade 8
70237124Bolt-Hex .31-18 x 2.75 Grade 8
80501162Axle, Bevel Gear Differential
90460142Bearing-Ball 1.57 x 2.68 x .59
10 0460132Cap, Differential End
11 0216082Ring-Retaining-External 1.15 x .093
12 0199522Pinion Bevel
13 0463762Block, Drive
14 0235311Gear, Final Drive
15 0460122Gear, Bevel
16 0199541Pin, Spider Pinion
17 4317872Key-Woodruff .19 x .63
7
PJ0141
11
Model 987070, 071, 072
NUMBER NINE SHAFT - PTO CLUTCH
1
12
11
19
20
21
22
Item Part No.Qty. Description
10112702Ring-Retaining-External .57 x .05
20180191Lever,PTO
31245495Key-Woodruff .19 x .75
40179661Ring-Retaining-External 1.38 x 1.30
50179671Bearing-Ball 1.38 x 2.44 x .55
60179521Cup, Clutch
70179531Assembly, Clutch Cone Bearing
80179571Cup, Clutch
90179492Bearing-Roller .75 x 1.00 x .50
10 0179581Bushing-Sleeve Steel .891 x 1.00 x 1.21
11 0180171Shaft, PTO Yoke
12 0180182O-Ring .63 x .75 x .062
13 0180161Yoke, PTO
14 064133001Washer-Hardened-Thrust .76 x 1.25 x .094
15 0179621Bushing-Sleeve 1.00 x 1.12 x 1.00
16 0179601Assembly, Shifting Collar
17 0179592Washer-Thrust 1.55 x 1.00 x .093
18 0112251Bearing-Needle-Thrust 1.00 x 1.55 x .078
19 0341941Sleeve, PTO Throw-Out
20 0341931Spring-Compression .19 x 5.50
21 0179651Gear, Spur PTO 10 Diametral Pitch 22 Teeth
22 0157332Ring-Retaining .70 x .93
23 0179511Shaft, PTO Clutch
24 58701400 ARKit, Sleeve and Spring